421 oil and gas

(1)

I n t e r n a t i o n a l A s s o c i a t i

(2)

Global experience Global experience

Te International Association o Oil & Gas Producers has access to a wealth o technical Te International Association o Oil & Gas Producers has access to a wealth o technical knowledge and experience with its members operating around the world in many dierent knowledge and experience with its members operating around the world in many dierent terrains. We collate and distil this valuable knowledge or the industry to use as guidelines terrains. We collate and distil this valuable knowledge or the industry to use as guidelines or good practice by individual members.

or good practice by individual members.

Consistent high quality database and guidelines Consistent high quality database and guidelines

Our overall aim is to ensure a consistent approach to training, management and best Our overall aim is to ensure a consistent approach to training, management and best practice throughout the wo

practice throughout the world.rld. Te oil & gas

Te oil & gas exploration and productioexploration and production industry recognin industry recognises the need to develop consist-ses the need to develop consist-ent databases and records in certain elds. Te OGP’s members are encouraged to use the ent databases and records in certain elds. Te OGP’s members are encouraged to use the guideli

guidelines as a stanes as a starting point or their operations or to supplemenrting point or their operations or to supplement their own policies at their own policies andnd regulations which may apply locally.

regulations which may apply locally.

Internationally recognised source of industry information Internationally recognised source of industry information

Many o our guidelines have been recognised and used by international authorities and Many o our guidelines have been recognised and used by international authorities and saety a

saety and environmental bodies. Requests come rom governments and non-governmentnd environmental bodies. Requests come rom governments and non-government organisations around the world as well

organisations around the world as well as rom non-member comas rom non-member companies.panies.

Disclaimer

Whilst eery eort has been made to ensure the accuracy o the inormation contained in

this publication, neither the OGP nor any o its members past present or uture warrants

its accuracy or will, regardless o its or their negligence, assume liability or any

oreseeable or unoreseeable use made thereo, which liability is hereby excluded

able or unoreseeable use made thereo, which liability is hereby excluded. Consequently,. Consequently,

such use is at the recipient’s own risk on the basis that any use by the

such use is at the recipient’s own risk on the basis that any use by the recipient constitutesrecipient constitutes

agreement to the terms o this disclaime

agreement to the terms o this disclaimer. Te recipient is obliged to inorm any subse-r. Te recipient is obliged to inorm any

subse-quent recipient o such terms.

quent recipient o such terms.

Tis document may provide guidance supplemental to the requirements o local

legisla-tion. Nothing herein, howeer, is intended to replace, amend, supersede or otherwise

tion. Nothing herein, howeer, is intended to replace, amend, supersede or otherwise

depart om such requirements. In the eent o any confict or contradiction between the

provisions o this docume

provisions o this document and local legislationnt and local legislation, applicable laws shall preail., applicable laws shall preail.

Copyright notice

Te contents o these pages are © Te International Association o Oil & Gas

Produc-ers. Permission is gien to reproduce this report in whole or in part provided (i) that the

ers. Permission is gien to reproduce this report in whole or in part provided (i) that the

copyright o OGP and (ii) the source are acknowledged. All other rights are resered. Any

other use requires the prior written permission o the OGP.

Tese erms and Conditions shall be governed by and construed in accordance with the

laws o England and Wales. Disputes arising here om shall be exclusiely subject to the

(3)

Report No: 421

June 20

June 2009

09

Acknowledgements Acknowledgements Tis report ha

Tis report has was compiled by the OGP Materias was compiled by the OGP Materials Sub-committee and approved by the OGP Stand-ls Sub-committee and approved by the OGP Stand-ards Committee.

(4)

ASTM

ASTM _{American Society or}_{American Society or }_{esting and Material}_{esting and Materialss} AWS

AWS _{American Welding Society}_{American Welding Society} BNIF

BNIF Bureau de Normalisation des Industries de la FonderieBureau de Normalisation des Industries de la Fonderie

BS

BS _{British Standard}_{British Standard} CD

CD _{Committee Dra}_{Committee Dra} CEN

CEN European Committee or StandardizationEuropean Committee or Standardization

DIN

DIN Deutsches Institut ür Normung Deutsches Institut ür Normung

DIS

DIS _{Dra International Standard}_{Dra International Standard} DNV

DNV _{Det Norske Veritas}_{Det Norske Veritas} EEMUA

EEMUA Engineering Equipment & Materials Users’ AssociationEngineering Equipment & Materials Users’ Association

EFC

EFC European Federation o CorrosionEuropean Federation o Corrosion

EN

EN _{European Norm}_{European Norm} GOST

GOST Russian Standards OrganisationRussian Standards Organisation

GSO

GSO Gul Standards OrganizationGul Standards Organization

IEC

IEC _{International Electrotechnical Commission}_{International Electrotechnical Commission} ISO

ISO _{International Organization or Standardization}_{International Organization or Standardization} MERL

MERL Materials Engineering Research LaboratoryMaterials Engineering Research Laboratory

MSS

MSS Manuacturers Standardization SocietyManuacturers Standardization Society

NACE

NACE _{National Association o Corrosion Engineers}_{National Association o Corrosion Engineers} NORSOK

NORSOK _Norwegian_{Norwegian Competitive Positio}_{Competitive Positionn} NP

NP New ProjectNew Project

OGP

OGP _{International Association o Oil & G}_{International Association o Oil & Gas Producers}_{as Producers} PGNI

PGNI _Petrol_{Petroleum and Natural G}_{eum and Natural Gas Industries}_{as Industries} SAC

SAC Standards Administration o ChinaStandards Administration o China

SC

SC SubcommitteeSubcommittee

SFS

SFS _{Finnish Standards Association}_{Finnish Standards Association} SSPC

SSPC _{Society or Protective Coatings}_{Society or Protective Coatings} TC

TC echnical echnical CommitteeCommittee

TW

TWII _{Te Welding Institute}_{Te Welding Institute} WD

WD _W_{Working Dra}_{orking Dra} WG

(5)

v v © OGP © OGP Abbreviations iv Abbreviations iv 1 1 – – Introduction Introduction 11 2

2 – – Purpose Purpose o o report report 11

3

3 – – Available Available standards standards 22

3.

3. General ...General ...  3.

3. Materials oil Materials oil & & gas industry gas industry specic standards specic standards available and available and used...used...  3.3

3.3 Non Non specic materials standards available and specic materials standards available and used by used by the othe oil & il & gas industry gas industry ...  3.

3. OGP OGP Catalogue Catalogue o o standards standards ......

4

4 – – ISO/TC ISO/TC 67 67 “materials” “materials” related related standards standards committees committees 1122

.

. General ...General ... .

. ISO/C 6ISO/C 677/WG 5 Aluminium a/WG 5 Aluminium alloy pipes lloy pipes ...... .3

.3 ISO/C ISO/C 6767/WG7 /WG7 Materials Materials or or use use in in HH_S containing S containing environments in oil environments in oil & gas & gas production ...production ...... .

. ISO/C ISO/C 6767/WG8 Materials, corrosion, w/WG8 Materials, corrosion, welding and joining and ndelding and joining and ndt t ...3...3 .5

.5 ISO/C 67ISO/C 67/SC/WG 8 W/SC/WG 8 Welding o pipelines ...elding o pipelines ...  .6

.6 ISO/C 6ISO/C 677/SC/WG /SC/WG  Induction ben Induction bends, angesds, anges, ttings , ttings ...... .7

.7 ISO/C 6ISO/C 677/SC/WG/SC/WG Cathodic Protection  Cathodic Protection o land & oshoro land & oshore pipelines e pipelines ...... .8

.8 ISO/C 6ISO/C 677/SC W/SC WG  External pipeline prG  External pipeline protective coatings otective coatings ... .

. ISO/C 67ISO/C 67/SC/WG/SC/WG6 Line pipe – ISO 383 revision 6 Line pipe – ISO 383 revision ... .

. ISO/C 67ISO/C 67/SC/WG3 Wellhead and /SC/WG3 Wellhead and Christmas Christmas tree equipment tree equipment ...... .

. ISO/C ISO/C 6767/SC/WG6 /SC/WG6 Subsea Subsea equipment equipment ... 55 .

. ISO/C 67ISO/C 67/SC5 Casing, /SC5 Casing, tubing atubing and drind drill pipe ...ll pipe ...55 .3

.3 ISO/C ISO/C 6767/SC6/WG5 Piping /SC6/WG5 Piping systems...systems...66 .

. ISO/C 67/SC7 OISO/C 67/SC7 Oshore sshore structures ...tructures ...66

5

5 – – Other Other ISO ISO material material relevant relevant committees committees 1177

5.

5. ISO/C 7 Steel ...ISO/C 7 Steel ...77 5.

5. ISO/C3ISO/C35 Paints and varnishes ...5 Paints and varnishes ... 88 5.3

5.3 ISO/C WISO/C Welding and allied processes elding and allied processes ... 5.

5. ISO/CISO/C56 Corro56 Corrosion o metals and asion o metals and a lloys lloys ... 

6

6 – – API API standards standards committees committees 2020

7

7 – – ASTM ASTM standards standards committees committees 2211

8

8 – – AWS AWS standards standards committees committees 2211

9

9 – – CEN CEN Materials Materials related related committees committees 2222

.

. CEN/CCEN/C ... ...... .

. CEN/C CEN/C  cathodic protection  cathodic protection ...... .3

.3 CEN/C3 Gas inrastructuCEN/C3 Gas inrastructure re ......

10

10 – – ECISS ECISS 2323

1

11 1 – – EFC EFC stanstandarddards s work work 2525

12

12 – – EEMUA EEMUA Materials Materials technology technology committee committee (MTC) (MTC) 2626

.

. General General introduction to introduction to EEMUA ...EEMUA ...6...6 .

. Relevant ERelevant EEMUA PublEMUA Publications ications ...6...6

13

13 – – NACE NACE standards standards committees committees 2727

14

14 – – NORSOK NORSOK standards standards committee committee – – Standards Standards Norway Norway 2929 15

15 – – OGP OGP Materials Materials Subcommittee Subcommittee 3030

1

16 6 – – TWI TWI standards standards activities activities 3311

1

17 7 – – Company Company specication specication 3232

18

(6)

(7)



Te International Association o Oil &

Te International Association o Oil & Gas Producers (OGPGas Producers (OGP) organised ) organised a workshop meeting a workshop meeting 7 – 8 Februar

7 – 8 February 7, in London, or the materials speciay 7, in London, or the materials specialists o OGP lists o OGP members with the objecmembers with the objec--tive o:

tive o: .

.Arranging a global networking o the materials technology specialists o OGP membersArranging a global networking o the materials technology specialists o OGP members or the purpose o d

or the purpose o discussing the existing iscussing the existing company and project specications and availablecompany and project specications and available standards related to this discipline.

standards related to this discipline. .

.Evaluating the need or uture materials standards work in the upstream oil & gas indus-Evaluating the need or uture materials standards work in the upstream oil & gas indus-try, or example in the I

try, or example in the ISO/C 6SO/C 67 area.7 area. 3.

3.Establishing Establishing a new a new work proposal(swork proposal(s) or ) or developmdevelopment o a ent o a new interna-new interna-tional standard on Materials Selection or other subjects as agreed. Basis tional standard on Materials Selection or other subjects as agreed. Basis or the work should be NORSOK standard M–

or the work should be NORSOK standard M–, Materials , Materials SelectionSelection

((http://www.standard.no/en/sectors/Petroleum/NORSOK-Standard-Categories/M–Material/M–0012http://www.standard.no/en/sectors/Petroleum/NORSOK-Standard-Categories/M–Material/M–0012), any company), any company specications oered and other relevant standards or documents.

specications oered and other relevant standards or documents. .

.Determining urther networking arrangements, i agreed.Determining urther networking arrangements, i agreed. OGP agreed subsequently to establish a Materia

OGP agreed subsequently to establish a Materials Sub-committee on the basis o tls Sub-committee on the basis o this work-his work-shop. See chapter 5. OGP’s position paper on developmen

shop. See chapter 5. OGP’s position paper on development and use t and use o standards io standards is ound ins ound in OGP Report №

OGP Report № 38 at38 athttp://www.ogp.org.uk/pubshttp://www.ogp.org.uk/pubs..

 – Purpose o report

Te purpose o this report is twoold: Te purpose o this report is twoold:

.

.to provide a list o the available and relevant international, regional, national and industryto provide a list o the available and relevant international, regional, national and industry standards or the oil & gas industries specically ocusing on materials related subjects as standards or the oil & gas industries specically ocusing on materials related subjects as seen by the OGP

seen by the OGP members involvmembers involved; anded; and .

.to provide an overview o relevant technical committees and working groups and materialto provide an overview o relevant technical committees and working groups and material standards work presently ongoing or this area.

(8)

3.1 General 3.1 General

Te primary and specic material standards or the oil & gas industry are singled out in Te primary and specic material standards or the oil & gas industry are singled out in para-graph 3. below, as these standards are the responsibility o the materials experts o the oil & graph 3. below, as these standards are the responsibility o the materials experts o the oil & gas industry community to develop and maintain, and normally nobody else.

gas industry community to develop and maintain, and normally nobody else. Many o the reerences in 3.3 below are generally applicable material

Many o the reerences in 3.3 below are generally applicable material standards where thestandards where the materials discipline has input and many o them are not specically made or the oil & gas materials discipline has input and many o them are not specically made or the oil & gas industry. Howeve

industry. However, they are r, they are requenrequently used by tly used by the materials the materials discipline and hence listed discipline and hence listed toto recognise these and to check i they are commonly reerenced by the global oil & gas industry recognise these and to check i they are commonly reerenced by the global oil & gas industry or their individual and specic purposes.

or their individual and specic purposes.

Tese lists will hardly ever be accurate or complete as there may be several other standards Tese lists will hardly ever be accurate or complete as there may be several other standards available and

available and thereore commethereore comments are welcome. See chapter 8.nts are welcome. See chapter 8.

3.2

3.2 Materials oil Materials oil & gas in& gas industry specic standards avdustry specic standards available and ailable and usedused API 2B

API 2B Fabricated structural steel pipeFabricated structural steel pipe API 2H

API 2H Carbon Manganese Steel Plate or Oshore StructuresCarbon Manganese Steel Plate or Oshore Structures API 2MT1

API 2MT1 Carbon Manganese Steel Plate with Improved Toughness or Oshore StructuresCarbon Manganese Steel Plate with Improved Toughness or Oshore Structures API 2MT2

API 2MT2 Rolled Shapes with Improved Notch ToughnessRolled Shapes with Improved Notch Toughness API 2W

API 2W Steel Plates or Oshore Structures, Produced by Thermo-Mechanical Control ProcessingSteel Plates or Oshore Structures, Produced by Thermo-Mechanical Control Processing (TMCP)

(TMCP) API 2X

API 2X Ultrasonic examination o oshore structural abrications.Ultrasonic examination o oshore structural abrications. API 2Y

API 2Y Steel Plates, Quenched-and-tempered, or Oshore StructuresSteel Plates, Quenched-and-tempered, or Oshore Structures API 2Z

API 2Z Preproduction Qualication or Steel Plates or Oshore StructuresPreproduction Qualication or Steel Plates or Oshore Structures API 5CT

API 5CT See also ISO 11960 PGNI – Steel pipes or use as casing or tubing or wellsSee also ISO 11960 PGNI – Steel pipes or use as casing or tubing or wells API 5 L

API 5 L See also ISO 3183 PGNI – Steel pipe or pipeline transportation systemsSee also ISO 3183 PGNI – Steel pipe or pipeline transportation systems API 15 HR

API 15 HR High Pressure Fiberglass Line PipeHigh Pressure Fiberglass Line Pipe API 15 LR

API 15 LR Low Pressure Fiberglass Line PipeLow Pressure Fiberglass Line Pipe API 17J

API 17J Unbonded Flexible PipeUnbonded Flexible Pipe ASTM A 694

ASTM A 694 Standard Specication or Carbon and Alloy Steel Forgings or Pipe Flanges, Fittings,Standard Specication or Carbon and Alloy Steel Forgings or Pipe Flanges, Fittings, Valves, and Parts or High-Pressure Transmission Service

Valves, and Parts or High-Pressure Transmission Service ASTM A 703

ASTM A 703 Steel Castings, General Requirements, or Pressure-Containing PartsSteel Castings, General Requirements, or Pressure-Containing Parts ASTM A 707

ASTM A 707 Standard Specication or Forged Carbon and Alloy Steel Flanges or Low – TemperatureStandard Specication or Forged Carbon and Alloy Steel Flanges or Low – Temperature Service

Service ASTM A 923

ASTM A 923 Standard Test Methods or Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Standard Test Methods or Detecting Detrimental Intermetallic Phase in Duplex Austenitic/ Ferritic Stainless Steels

Ferritic Stainless Steels AWS A5.xx

AWS A5.xx Specication or Welding Electrodes & Rods (multiple standards)Specication or Welding Electrodes & Rods (multiple standards) DNV OS C501

DNV OS C501 Composite components.Composite components. DNV OS F101

DNV OS F101 Submarine Pipeline SystemsSubmarine Pipeline Systems DNV RP B201

DNV RP B201 Metallic Materials in Drilling, Production and Process SystemsMetallic Materials in Drilling, Production and Process Systems DNV RP B401

DNV RP B401 Cathodic Protection DesignCathodic Protection Design DNV RP D404

DNV RP D404 Unstable racture.Unstable racture. DNV RP F103

DNV RP F103 Cathodic Protection o Submarine Pipelines by Galvanic AnodesCathodic Protection o Submarine Pipelines by Galvanic Anodes DNV RP O501

DNV RP O501 Erosive wear in piping systems.Erosive wear in piping systems. EEMUA 144

EEMUA 144 90/10 Copper Nickel Alloy Piping or Oshore Applications – Specication: Tubes Seam-90/10 Copper Nickel Alloy Piping or Oshore Applications – Specication: Tubes Seam-less and Welded

less and Welded EEMUA 145

EEMUA 145 90/10 Copper Nickel Alloy Piping or Oshore Applications – Specication: Flanges Com-90/10 Copper Nickel Alloy Piping or Oshore Applications – Specication: Flanges Com-posite and Solid

posite and Solid EEMUA 146

EEMUA 146 90/10 Copper Nickel Alloy Piping or Oshore Applications – Specication: Fittings90/10 Copper Nickel Alloy Piping or Oshore Applications – Specication: Fittings EEMUA 149

EEMUA 149 Code o Practice or the Identication and Checking o Materials o Construction in PressureCode o Practice or the Identication and Checking o Materials o Construction in Pressure Systems in Process Plants

Systems in Process Plants EEMUA 158

EEMUA 158 Construction Specication or Fixed Oshore Structures in the North SeaConstruction Specication or Fixed Oshore Structures in the North Sea EEMUA 176

EEMUA 176 Specication or Structural Castings or Use OshoreSpecication or Structural Castings or Use Oshore EEMUA 179

EEMUA 179 A Working Guide or Carbon Steel Equipment in Wet HA Working Guide or Carbon Steel Equipment in Wet H₂₂S ServiceS Service EEMUA 192

(9)

33

EEMUA 194 Guidelines or Materials Selection and Corrosion Control or Subsea Oil & gas ProductionGuidelines or Materials Selection and Corrosion Control or Subsea Oil & gas Production Equipment

Equipment EEMUA 197

EEMUA 197 Specication or the Fabrication o Non-Primary Structural Steelwork or Oshore Installa-Specication or the Fabrication o Non-Primary Structural Steelwork or Oshore Installa-tions

tions EEMUA 203

EEMUA 203 Guide to the Application o ISO 3183 Parts 2 (1996) and 3 (1999) Petroleum and NaturalGuide to the Application o ISO 3183 Parts 2 (1996) and 3 (1999) Petroleum and Natural Gas Industries – Steel Pipes or Pipelines – Technical Delivery Conditions

Gas Industries – Steel Pipes or Pipelines – Technical Delivery Conditions EEMUA 204

EEMUA 204 Piping and the European Pressure Equipment Directive: Guidance or Plant Owners/Opera-Piping and the European Pressure Equipment Directive: Guidance or Plant Owners/Opera-tors

tors EN 10225

EN 10225 Weldable structural steels or xed oshore structuresWeldable structural steels or xed oshore structures EFC 16

EFC 16 Guidelines on Material Requirements or Carbon and Low Alloy Steels or HGuidelines on Material Requirements or Carbon and Low Alloy Steels or H₂₂S EnvironmentsS Environments in Oil & Gas Production.

in Oil & Gas Production. EFC 17

EFC 17 Corrosion Resistant Alloys or Oil & Gas Production. Guidance on General RequirementsCorrosion Resistant Alloys or Oil & Gas Production. Guidance on General Requirements and Test Methods or H

and Test Methods or H₂₂S ServiceS Service EFC 23

EFC 23 COCO₂₂Corrosion Control in Oil & Gas Production – Design ConsiderationsCorrosion Control in Oil & Gas Production – Design Considerations EFC 42

EFC 42 Corrosion in reneriesCorrosion in reneries EFC 39

EFC 39 The use o Corrosion Inhibitors in Oil & Gas ProductionThe use o Corrosion Inhibitors in Oil & Gas Production ISO 11960

ISO 11960 PGNI – Steel pipes or use as casing or tubing or wellsPGNI – Steel pipes or use as casing or tubing or wells ISO 13680

ISO 13680 PGNI – Corrosion-resistant alloy seamless tubes or use as casing, tubing and coupling stockPGNI – Corrosion-resistant alloy seamless tubes or use as casing, tubing and coupling stock – Technical delivery conditions

– Technical delivery conditions ISO 14692–1

ISO 14692–1 PGNI – Glass reinorced plastics (GRP) piping – Vocabulary, symbols, applications andPGNI – Glass reinorced plastics (GRP) piping – Vocabulary, symbols, applications and materials.

materials. ISO 14692–2

ISO 14692–2 PGNI – Glass reinorced plastics (GRP) piping – Qualication and manuacture.PGNI – Glass reinorced plastics (GRP) piping – Qualication and manuacture. ISO 14692–3

ISO 14692–3 PGNI – Glass reinorced plastics (GRP) piping – System design.PGNI – Glass reinorced plastics (GRP) piping – System design. ISO 14692–4

ISO 14692–4 PGNI – Glass reinorced plastics (GRP) piping – Fabrication, installation and operation.PGNI – Glass reinorced plastics (GRP) piping – Fabrication, installation and operation. ISO 15156–1

ISO 15156–1 PNGI – Materials or use in HPNGI – Materials or use in H₂₂S-containing environments in oil & gas production – GeneralS-containing environments in oil & gas production – General principles or selection o cracking-resistant materials

principles or selection o cracking-resistant materials ISO 15156–2

ISO 15156–2 PNGI – Materials or use in HPNGI – Materials or use in H₂₂S-containing environments in oil & gas production – Cracking-S-containing environments in oil & gas production – Cracking-resistant carbon and low alloy steels, and the use o cast irons

resistant carbon and low alloy steels, and the use o cast irons ISO 15156–3

ISO 15156–3 PNGI – Materials or use in HPNGI – Materials or use in H₂₂S-containing environments in oil & gas production – Cracking-S-containing environments in oil & gas production – Cracking-resistant CRAs (corrosion Cracking-resistant alloys) and other alloys

resistant CRAs (corrosion resistant alloys) and other alloys ISO 15546

ISO 15546 PGNI – Aluminium alloy drill pipePGNI – Aluminium alloy drill pipe ISO 15589–1

ISO 15589–1 PGNI – Cathodic protection o pipeline transportation systems – On-land pipelinesPGNI – Cathodic protection o pipeline transportation systems – On-land pipelines ISO 15589–2

ISO 15589–2 PGNI – Cathodic protection o pipeline transportation systems – Oshore pipelinesPGNI – Cathodic protection o pipeline transportation systems – Oshore pipelines ISO 21809–2

ISO 21809–2 PNGI – External coatings or buried or submerged pipelines used in pipeline transportationPNGI – External coatings or buried or submerged pipelines used in pipeline transportation systems — Part 2: Fusion-bonded epoxy coatings

systems — Part 2: Fusion-bonded epoxy coatings 275ISO 21809–3

275ISO 21809–3 PNGI – External coatings or buried or submerged pipelines used in pipeline transportationPNGI – External coatings or buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings

systems — Part 3: Field joint coatings ISO 23936–1

ISO 23936–1 PNGI — Non-metallic materials in contact with media related to oil & gas production — PartPNGI — Non-metallic materials in contact with media related to oil & gas production — Part 1: Thermoplastics

1: Thermoplastics ISO 3183

ISO 3183 PGNI – Steel pipe or pipeline transportation systemsPGNI – Steel pipe or pipeline transportation systems MSS SP–44

MSS SP–44 Steel Pipeline FlangesSteel Pipeline Flanges MSS SP–55

MSS SP–55 Visual Inspection Guide For Steel CastingsVisual Inspection Guide For Steel Castings MSS SP–75

MSS SP–75 Specication or High Test Wrought Butt Welding FittingsSpecication or High Test Wrought Butt Welding Fittings NACE MR 0175

NACE MR 0175 Standard Material Requirements, Metals or Sulde Stress Cracking and Stress CorrosionStandard Material Requirements, Metals or Sulde Stress Cracking and Stress Corrosion Cracking Resistance in Sour Oileld Environments

Cracking Resistance in Sour Oileld Environments NACE RP 0169

NACE RP 0169 Recommended Practice. Control o External Corrosion o Underground or Submerged Metal-Recommended Practice. Control o External Corrosion o Underground or Submerged Metal-lic Piping Systems.

lic Piping Systems. NACE RP 0170

NACE RP 0170 Protection o Austenitic Stainless Steel in Reneries against Stress Corrosion, Cracking by useProtection o Austenitic Stainless Steel in Reneries against Stress Corrosion, Cracking by use o Naturalizing Solutions during shutdown

o Naturalizing Solutions during shutdown NACE RP 0175

NACE RP 0175 Control o Internal Corrosion in Steel Pipelines and Piping SystemsControl o Internal Corrosion in Steel Pipelines and Piping Systems NACE RP 0176

NACE RP 0176 Standard Recommended Practice, Corrosion Control o Steel Fixed Oshore Structures Asso-Standard Recommended Practice, Corrosion Control o Steel Fixed Oshore Structures Asso-ciated with Petroleum Production

ciated with Petroleum Production NACE RP 0192

NACE RP 0192 Monitoring Corrosion in oil & gas production with iron countsMonitoring Corrosion in oil & gas production with iron counts NACE RP 0194

NACE RP 0194 Field monitoring o bacterial growth in oil eld systemField monitoring o bacterial growth in oil eld system NACE RP 0675

NACE RP 0675 Control o external corrosion on oshore steel pipelinesControl o external corrosion on oshore steel pipelines NACE RP 0775

NACE RP 0775 Preparation and installation o corrosion coupons and interpretation o test data in oil eldPreparation and installation o corrosion coupons and interpretation o test data in oil eld operation

operation NACE TM 0169

NACE TM 0169 Control o external corrosion on underground or sub merged metallic piping systemsControl o external corrosion on underground or sub merged metallic piping systems NACE TM 0177

(10)

NACE TM 0284

NACE TM 0284 Testing o Metals or Resistance to Stepwise CrackingTesting o Metals or Resistance to Stepwise Cracking NACE TM 0497

NACE TM 0497 Measurement technique related to criteria or cathodic protection on underground or sub-Measurement technique related to criteria or cathodic protection on underground or sub-merged piping system

merged piping system NORSOK M–001

NORSOK M–001 Material selectionMaterial selection NORSOK M

NORSOK M –10–1011 Structural steel abricationStructural steel abrication NORSOK M–102

NORSOK M–102 Structural aluminium abricationStructural aluminium abrication NORSOK M

NORSOK M –12–1200 Material data sheets or structural steelMaterial data sheets or structural steel NORSOK

NORSOK M–12M–1211 Aluminium structural materialsAluminium structural materials NORSOK M

NORSOK M –12–1222 Cast structural steelCast structural steel NORSOK M

NORSOK M –12–1233 Forged structural steelForged structural steel NORSOK M–501

NORSOK M–501 Surace preparation and protective coatingSurace preparation and protective coating NORSOK M–503

NORSOK M–503 Cathodic protectionCathodic protection NORSOK M–506

NORSOK M–506 COCO₂₂Corrosion rate calculation modelCorrosion rate calculation model NORSOK M–601

NORSOK M–601 Welding and inspection o pipingWelding and inspection o piping NORSOK M–622

NORSOK M–622 Fabrication and installation o GRP piping systems (drat standard)Fabrication and installation o GRP piping systems (drat standard) NORSOK M–630

NORSOK M–630 Material data sheets or pipingMaterial data sheets or piping NORSOK M–650

NORSOK M–650 Qualication o manuacturers o special materialsQualication o manuacturers o special materials NORSOK M–710

NORSOK M–710 Qualication o non-metallic sealing materials and manuacturersQualication o non-metallic sealing materials and manuacturers

3.3

3.3 Non specic Non specic materials standards available materials standards available and used band used by the oil y the oil & gas& gas industry

industry API 6A

API 6A Specication or Wellhead and Christmas Tree Equipment – See also ISO 10423Specication or Wellhead and Christmas Tree Equipment – See also ISO 10423 API 6D

API 6D Specication Specication or Pipeline Valves – or Pipeline Valves – See also See also ISO 143ISO 1431313 API 520

API 520 Sizing, Selection, and Installation O Pressure-Relieving Devices in Reneries, Part I and II.Sizing, Selection, and Installation O Pressure-Relieving Devices in Reneries, Part I and II. API 1104

API 1104 Welding o Pipelines and Related FacilitiesWelding o Pipelines and Related Facilities API 1111

API 1111 Design, Construction, Operation and Maintenance o Oshore Hydrocarbon Pipelines (LimitDesign, Construction, Operation and Maintenance o Oshore Hydrocarbon Pipelines (Limit State Design)

State Design) ANSI/ASME B 16.49

ANSI/ASME B 16.49 Factory-Made, Wrought Steel, Buttwelding Induction Bends or Transportation and Distribu-Factory-Made, Wrought Steel, Buttwelding Induction Bends or Transportation and Distribu-tion Systems

tion Systems ANSI/ASME B 31.3

ANSI/ASME B 31.3 Process PipingProcess Piping ASME Section II

ASME Section II Materials Part C – Specications or Welding Rods, Electrodes and Filler Metals.Materials Part C – Specications or Welding Rods, Electrodes and Filler Metals. ASME Section V

ASME Section V Nondestructive ExaminationNondestructive Examination ASME Section VIII

ASME Section VIII Rules or Construction o Pressure Vessels Division 1Rules or Construction o Pressure Vessels Division 1 ASME Section IX

ASME Section IX Welding and Brazing QualicationsWelding and Brazing Qualications ASTM A 153

ASTM A 153 Standard Specication or Zinc Coating (Hot Dip) on Iron and Steel HardwareStandard Specication or Zinc Coating (Hot Dip) on Iron and Steel Hardware ASTM A 193

ASTM A 193 Specication or Alloy – Steel and Stainless Steel Bolting Materials or High – TemperatureSpecication or Alloy – Steel and Stainless Steel Bolting Materials or High – Temperature Service

Service ASTM A 194

ASTM A 194 Specication or Carbon and Alloy Steel Nuts or Bolts or High – Pressure and High-Temper-Specication or Carbon and Alloy Steel Nuts or Bolts or High – Pressure and High-Temper-ature Service

ature Service ASTM A 320

ASTM A 320 Specication or Alloy Steel Bolting Materials or Low – Temperature ServiceSpecication or Alloy Steel Bolting Materials or Low – Temperature Service ASTM A 388

ASTM A 388 Standard Practice For Ultrasonic Examination O Heavy Steel ForgingsStandard Practice For Ultrasonic Examination O Heavy Steel Forgings ASTM A 609

ASTM A 609 Standard Practice For Castings, Carbon, Low-Alloy And Martensitic Stainless Steel, Ultra-Standard Practice For Castings, Carbon, Low-Alloy And Martensitic Stainless Steel, Ultra-sonic Examination Thereo

sonic Examination Thereo ASTM A 991

ASTM A 991 Standard test method or conducting temperature uniormity surveys o urnaces used to heatStandard test method or conducting temperature uniormity surveys o urnaces used to heat treat steel products

treat steel products ASTM D 1414

ASTM D 1414 Methods o Testing Rubber O-ringsMethods o Testing Rubber O-rings ASTM D 1415

ASTM D 1415 Standard Test Method or Rubber property – International hardness (IRHD).Standard Test Method or Rubber property – International hardness (IRHD). ASTM D 1525

ASTM D 1525 Test Method or Vicat Sotening Point or PlasticsTest Method or Vicat Sotening Point or Plastics ASTM D 2240

ASTM D 2240 Test Method or Rubber Property – Durometer Hardness (Shore A/ D).Test Method or Rubber Property – Durometer Hardness (Shore A/ D). ASTM D 2990

ASTM D 2990 Test methods or Tensile, Compressive and Flexural Creep and Creep. Rupture Test o Plas-Test methods or Tensile, Compressive and Flexural Creep and Creep. Rupture Test o Plas-tics.

tics. ASTM D 2992

ASTM D 2992 Practice or Obtaining Hydrostatic or Pressure Design Basis or Fibreglass Pipe and FittingsPractice or Obtaining Hydrostatic or Pressure Design Basis or Fibreglass Pipe and Fittings ASTM D 3032

ASTM D 3032 Method o testing hook-up wire insulation. Description o Arrhenius methodMethod o testing hook-up wire insulation. Description o Arrhenius method ASTM D 395

ASTM D 395 Standard Test Method or Rubber Property – Compression Set (method B).Standard Test Method or Rubber Property – Compression Set (method B). ASTM D 638

(11)

55

ASTM D 695 Test Method or Compressive Properties o Rigid PlasticsTest Method or Compressive Properties o Rigid Plastics ASTM D 746

ASTM D 746 Test Method or Brittleness Temperature o Plastics and Elastomers by ImpactTest Method or Brittleness Temperature o Plastics and Elastomers by Impact ASTM D 790

ASTM D 790 Test method or Flexural Properties o Un-reinorced and Reinorced Plastics and ElectricalTest method or Flexural Properties o Un-reinorced and Reinorced Plastics and Electrical Insulating Materials

Insulating Materials ASTM D 792

ASTM D 792 Test Methods or Specic Gravity and Density o Plastics by DisplacementTest Methods or Specic Gravity and Density o Plastics by Displacement ASTM D 1141

ASTM D 1141 Specication or Substitute Ocean WaterSpecication or Substitute Ocean Water ASTM D 1599

ASTM D 1599 Standard Test Method or Resistance to Short-Time Hydraulic Failure Pressure o Plastic PipeStandard Test Method or Resistance to Short-Time Hydraulic Failure Pressure o Plastic Pipe Tubing, and Fittings

Tubing, and Fittings ASTM D 4752

ASTM D 4752 Standard Test Method or Measuring MEK Resistance o Ethyl Silicate (Inorganic) Zinc-RichStandard Test Method or Measuring MEK Resistance o Ethyl Silicate (Inorganic) Zinc-Rich Primers by Solvent Rub.

Primers by Solvent Rub. ASTM E 112

ASTM E 112 Standard Test Method or Determining Average Grain SizeStandard Test Method or Determining Average Grain Size ASTM E 125

ASTM E 125 Standard Reerence Photographs For Magnetic Particle Indications On Ferrous CastingsStandard Reerence Photographs For Magnetic Particle Indications On Ferrous Castings ASTM E 165

ASTM E 165 Standard Test Method For Liquid Penetrant Examination.Standard Test Method For Liquid Penetrant Examination. ASTM E 186

ASTM E 186 Reerence Radiographs For Heavy-Walled (51 to 112 mm) Steel CastingsReerence Radiographs For Heavy-Walled (51 to 112 mm) Steel Castings ASTM E 280

ASTM E 280 Reerence Radiographs For Heavy-Walled (112 to 305 mm) Steel CastingsReerence Radiographs For Heavy-Walled (112 to 305 mm) Steel Castings ASTM E 446

ASTM E 446 Reerence Radiographs For Steel Castings Up To 51 mm In ThicknessReerence Radiographs For Steel Castings Up To 51 mm In Thickness ASTM E 562

ASTM E 562 Practice or Determining Volume Fraction by Systematic Manual Point Count.Practice or Determining Volume Fraction by Systematic Manual Point Count. ASTM E 709

ASTM E 709 Standard Practice For Magnetic Particle ExaminationStandard Practice For Magnetic Particle Examination ASTM G 48

ASTM G 48 Standard Test Method or Pitting and Crevice Corrosion Resistance o Stainless Steel andStandard Test Method or Pitting and Crevice Corrosion Resistance o Stainless Steel and Related Alloys by the use o Ferric Chloride Solution

Related Alloys by the use o Ferric Chloride Solution AWS D1.1

AWS D1.1 Structural Welding Code – SteelStructural Welding Code – Steel BNIF TR 341–02

BNIF TR 341–02 Characterisation o Surace Condition o Steel CastingsCharacterisation o Surace Condition o Steel Castings BS 1806

BS 1806 Standard Inch Sizes o O-rings.Standard Inch Sizes o O-rings. BS 4994

BS 4994 Specication or design and construction o vessels and tanks in reinorced plasticsSpecication or design and construction o vessels and tanks in reinorced plastics BS 6442

BS 6442 Specication or limits o surace imperections on elastomeric toroidal sealing ringsSpecication or limits o surace imperections on elastomeric toroidal sealing rings (O-rings).

(O-rings). BS 7448

BS 7448 Fracture mechanics toughness testsFracture mechanics toughness tests BS 7910

BS 7910 Guide on methods or assessing the acceptability o faws in usion welded structures.Guide on methods or assessing the acceptability o faws in usion welded structures. BS MA 18

BS MA 18 Salt Water Piping in ShipsSalt Water Piping in Ships DIN 16965–2

DIN 16965–2 Wound glass bre reinorced polyester resin (UP-GF) pipes, Type B pipes, dimensionsWound glass bre reinorced polyester resin (UP-GF) pipes, Type B pipes, dimensions DIN 16966

DIN 16966 Glass bre reinorced polyester resin (UP-GF) pipe ttings and joint –Glass bre reinorced polyester resin (UP-GF) pipe ttings and joint – Part 1: Assemblies; ttings; general quality requirements and testing Part 1: Assemblies; ttings; general quality requirements and testing Part 2: Elbows, Dimensions

Part 2: Elbows, Dimensions Part 4: Tees, Nozzles, Dimensions Part 4: Tees, Nozzles, Dimensions Part 5: Reducers; Dimensions. Part 5: Reducers; Dimensions.

Part 6: Collars, fanges, joint rings; Dimensions. Part 6: Collars, fanges, joint rings; Dimensions.

Part 7: Bushings, fanges, fanged and butt joints; general quality requirements and test Part 7: Bushings, fanges, fanged and butt joints; general quality requirements and test methods.

methods.

Part 8: Laminated joints; Dimensions Part 8: Laminated joints; Dimensions DIN 53453

DIN 53453 Testing o Plastics, Impact Flexural Test.Testing o Plastics, Impact Flexural Test. DIN 8566–2

DIN 8566–2 Zusätze ür das termische Spritzen; Massivdrähte zum Lichtbogenspritzen; Technische Lieer-Zusätze ür das termische Spritzen; Massivdrähte zum Lichtbogenspritzen; Technische Lieer-bedingungen.

bedingungen. DNV CN 33.1

DNV CN 33.1 Corrosion prevention o tanks and holdsCorrosion prevention o tanks and holds DNV RP F201

DNV RP F201 Dynamic risersDynamic risers EN 473

EN 473 Nordtest Qualication o NDE operatorsNordtest Qualication o NDE operators EN 10002–1

EN 10002–1 Metallic materials – Tensile testing – Part 1: Method o test at ambient temperatureMetallic materials – Tensile testing – Part 1: Method o test at ambient temperature EN 1011–series

EN 1011–series Welding – Recommendation or welding o metallic materials, relevant partsWelding – Recommendation or welding o metallic materials, relevant parts EN 10204

EN 10204 Metallic products – Types o inspection documents includingMetallic products – Types o inspection documents including EN 10225

EN 10225 Weldable structural steels or xed oshore structures – Technical delivery conditionsWeldable structural steels or xed oshore structures – Technical delivery conditions EN 1043–1

EN 1043–1 Destructive tests on welds in metallic materials – Hardness testing – Part 1: Hardness test onDestructive tests on welds in metallic materials – Hardness testing – Part 1: Hardness test on arc welded joints.

arc welded joints. EN 1289

EN 1289 Non destructive examination o welds – Penetrant testing o welds – Acceptance levels.Non destructive examination o welds – Penetrant testing o welds – Acceptance levels. EN 1290

EN 1290 NDT o welds – Magnetic particle examination o welds –NDT o welds – Magnetic particle examination o welds – EN 1291

EN 1291 NDT o welds – Magnetic particle examination o welds – Acceptance levelsNDT o welds – Magnetic particle examination o welds – Acceptance levels EN 1418

EN 1418 Welding personnel – Approval testing o welding operators or usion welding and resist-Welding personnel – Approval testing o welding operators or usion welding and resist-ance weld setters or ully mechanised and automatic welding o metallic materials ance weld setters or ully mechanised and automatic welding o metallic materials EN 1435

EN 1435 Non destructive examination o welds – Radiographic examination o welded jointsNon destructive examination o welds – Radiographic examination o welded joints EN 1597–1

EN 1597–1 Welding consumables – Test methods – Part 1: Test piece or all weld metal test specimens inWelding consumables – Test methods – Part 1: Test piece or all weld metal test specimens in steel, nickel and nickel alloys.

(12)

EN 1714

EN 1714 Non destructive examination o welds – Ultrasonic examination o welded jointsNon destructive examination o welds – Ultrasonic examination o welded joints EN 26847

EN 26847 Covered electrodes or manual metal arc welding. Deposition o a weld pad or chemicalCovered electrodes or manual metal arc welding. Deposition o a weld pad or chemical analysis

analysis EN 287

EN 287 Approval testing o welders – Fusion weldingApproval testing o welders – Fusion welding EN 288

EN 288 Specication and approval o welding procedures or metallic materialsSpecication and approval o welding procedures or metallic materials EN 444

EN 444 NDT – General principles or radiographic examination o metallic materials by X-rays andNDT – General principles or radiographic examination o metallic materials by X-rays and gamma rays

gamma rays EN 462

EN 462 NDT – Image quality o radiographsNDT – Image quality o radiographs EN 473

EN 473 Qualication and certication o NDT personnel – General principlesQualication and certication o NDT personnel – General principles EN 719

EN 719 Welding coordination – Tasks and responsibilities.Welding coordination – Tasks and responsibilities. EN 729

EN 729 Quality requirements or welding – Fusion welding o metallic materials.Quality requirements or welding – Fusion welding o metallic materials. EN 875

EN 875 Welding – Welded joints in metallic materials – Specimen location and notch orientation orWelding – Welded joints in metallic materials – Specimen location and notch orientation or impact tests.

impact tests. EN 970

EN 970 Non-destructive examination o usion welds – Visual examination.Non-destructive examination o usion welds – Visual examination. ISO 148–1

ISO 148–1 Metallic materials – Charpy pendulum impact test – Part 1: Test methodMetallic materials – Charpy pendulum impact test – Part 1: Test method ISO 148–2

ISO 148–2 Metallic materials – Charpy pendulum impact test – Part 2: Verication o test machineMetallic materials – Charpy pendulum impact test – Part 2: Verication o test machine ISO 148–3

ISO 148–3 Metallic materials – Charpy pendulum impact test – Part 3: Preparation and characterisationMetallic materials – Charpy pendulum impact test – Part 3: Preparation and characterisation o Charpy V reerence test pieces or verication o test machines

o Charpy V reerence test pieces or verication o test machines ISO 377

ISO 377 Steel and steel products – Location and preparation o samples and test pieces or mechani-Steel and steel products – Location and preparation o samples and test pieces or mechani-cal testing

cal testing ISO 404

ISO 404 Steel and steel products – General technical delivery requirementsSteel and steel products – General technical delivery requirements ISO 630

ISO 630 Structural steels – Plates, wide fats, bars, sections and prolesStructural steels – Plates, wide fats, bars, sections and proles ISO 642

ISO 642 Steel – Hardenability test by end quenching (Jominy test)Steel – Hardenability test by end quenching (Jominy test) ISO 643

ISO 643 Steels – Micrographic determination o the apparent grain sizeSteels – Micrographic determination o the apparent grain size ISO 657–1

ISO 657–1 Hot-rolled steel sections – Part 1: Equal-leg angles – DimensionsHot-rolled steel sections – Part 1: Equal-leg angles – Dimensions ISO 657–14

ISO 657–14 Hot-rolled steel sections – Part 14: Hot-nished structural hollow sections – Dimensions andHot-rolled steel sections – Part 14: Hot-nished structural hollow sections – Dimensions and sectional properties

sectional properties ISO 657–15

ISO 657–15 Hot-rolled steel sections – Part 15: Sloping fange beam sections (Metric series) – DimensionsHot-rolled steel sections – Part 15: Sloping fange beam sections (Metric series) – Dimensions and sectional properties

and sectional properties ISO 683–1

ISO 683–1 Heat-treatable steels, alloy steels and ree-cutting steels – Part 1: Direct-hardening unalloyedHeat-treatable steels, alloy steels and ree-cutting steels – Part 1: Direct-hardening unalloyed and low-alloyed wrought steel in orm o dierent black products

and low-alloyed wrought steel in orm o dierent black products ISO 683–18

ISO 683–18 Heat-treatable steels, alloy steels and ree – cutting steels – Part 18: Bright products o unal-Heat-treatable steels, alloy steels and ree – cutting steels – Part 18: Bright products o unal-loyed and low alloy steels

loyed and low alloy steels ISO 783

ISO 783 Metallic materials – Tensile testing at elevated temperatureMetallic materials – Tensile testing at elevated temperature ISO 857–1

ISO 857–1 Welding and allied processes – Vocabulary – Part 1: Metal welding processesWelding and allied processes – Vocabulary – Part 1: Metal welding processes ISO 868

ISO 868 Determination o indentation hardness by means o a Durometer (Shore A/ D hardness).Determination o indentation hardness by means o a Durometer (Shore A/ D hardness). ISO 898

ISO 898 Mechanical properties o astenersMechanical properties o asteners ISO 1432

ISO 1432 Rubber vulcanised – low temperature stiening (Gehman test)Rubber vulcanised – low temperature stiening (Gehman test) ISO 1461

ISO 1461 Metallic coatings – Hot-dip galvanised coating on abricated errous products – Require-Metallic coatings – Hot-dip galvanised coating on abricated errous products – Require-ments

ments ISO

ISO 18118177 Vulcanised rubbers – Resistance to liquids – methods o testsVulcanised rubbers – Resistance to liquids – methods o tests ISO 2503

ISO 2503 Gas welding equipment – Pressure regulators or gas cylinders used in welding, cutting andGas welding equipment – Pressure regulators or gas cylinders used in welding, cutting and allied processes up to 300 bar

allied processes up to 300 bar ISO 2553

ISO 2553 Welded, brazed and soldered joints – Symbolic representation on drawingsWelded, brazed and soldered joints – Symbolic representation on drawings ISO 2566–1

ISO 2566–1 Steel – Conversion o elongation values – Part 1: Carbon and low alloy steelsSteel – Conversion o elongation values – Part 1: Carbon and low alloy steels ISO 2566–2

ISO 2566–2 Steel – Conversion o elongation values – Part 2: Austenitic steelsSteel – Conversion o elongation values – Part 2: Austenitic steels ISO 2604–1

ISO 2604–1 Steel products or pressure purposes – Quality requirements – Part 1: ForgingsSteel products or pressure purposes – Quality requirements – Part 1: Forgings ISO 2604–3

ISO 2604–3 Steel products or pressure purposes – Quality requirements – Part 3: Electric resistance andSteel products or pressure purposes – Quality requirements – Part 3: Electric resistance and inductio

induction-welded n-welded tubestubes ISO 2604–5

ISO 2604–5 Steel products or pressure purposes – Quality requirements – Part 5: Longitudinally weldedSteel products or pressure purposes – Quality requirements – Part 5: Longitudinally welded austenitic stainless steel tubes

austenitic stainless steel tubes ISO 2632

ISO 2632 Roughness Comparison Specimens, Cast SuracesRoughness Comparison Specimens, Cast Suraces ISO 2814

ISO 2814 Paints and varnishes – Comparison o contrast ratio (hiding power) o paint o the same typePaints and varnishes – Comparison o contrast ratio (hiding power) o paint o the same type and colour

and colour ISO 3506–1

ISO 3506–1 Mechanical properties o corrosion resistant stainless steel asteners – Part 1: Bolts, screwsMechanical properties o corrosion resistant stainless steel asteners – Part 1: Bolts, screws and studs.

and studs. ISO 3506–2

(13)

77

ISO 3545–1 Steel tubes and ttings – Symbols or use in specications – Part 1: Tubes and tubular acces-Steel tubes and ttings – Symbols or use in specications – Part 1: Tubes and tubular acces-sories with circular cross-section

sories with circular cross-section ISO 3545–2

ISO 3545–2 Steel tubes and ttings – Symbols or use in specications – Part 2: Square and rectangularSteel tubes and ttings – Symbols or use in specications – Part 2: Square and rectangular hollow sections

hollow sections ISO 3690

ISO 3690 Welding and allied processes – Determination o hydrogen content in erritic steel arc weldWelding and allied processes – Determination o hydrogen content in erritic steel arc weld metal

metal ISO 3834

ISO 3834 Quality requirements or usion welding o metallic materials (5 parts)Quality requirements or usion welding o metallic materials (5 parts) ISO 3834–2

ISO 3834–2 Quality requirements or welding – Fusion welding o metallic materials – Part 2: Compre-Quality requirements or welding – Fusion welding o metallic materials – Part 2: Compre-hensive quality requirements

hensive quality requirements ISO 4063

ISO 4063 Welding and allied processes – Nomenclature o processes and reerence numbersWelding and allied processes – Nomenclature o processes and reerence numbers ISO 4136

ISO 4136 Destructive tests on welds in metallic materials – Transverse tensile testingDestructive tests on welds in metallic materials – Transverse tensile testing ISO 4624

ISO 4624 Paints and varnishes – Pull-o test or adhesion.Paints and varnishes – Pull-o test or adhesion. ISO 4628–6

ISO 4628–6 Paints and varnishes – Evaluation o degradation o paint coatings – Designation o intensity,Paints and varnishes – Evaluation o degradation o paint coatings – Designation o intensity, quantity and size o common types o deect – Part 6: Rating o degree o chalking by tape quantity and size o common types o deect – Part 6: Rating o degree o chalking by tape method.

method. ISO 4885

ISO 4885 Ferrous products – Heat treatments – VocabularyFerrous products – Heat treatments – Vocabulary ISO 4948–1

ISO 4948–1 Steels – Classication – Part 1: Classication o steels into unalloyed and alloy steels basedSteels – Classication – Part 1: Classication o steels into unalloyed and alloy steels based on chemical composition

on chemical composition ISO 4948–2

ISO 4948–2 Steels – Classication – Part 2: Classication o unalloyed and alloy steels according toSteels – Classication – Part 2: Classication o unalloyed and alloy steels according to main quality classes and main property or application characteristics

main quality classes and main property or application characteristics ISO 4954

ISO 4954 Steel or cold heading and cold extrudingSteel or cold heading and cold extruding ISO 4967

ISO 4967 Steel – Determination o content o non metallic inclusions – Micrographic method usingSteel – Determination o content o non metallic inclusions – Micrographic method using standard diagrams

standard diagrams ISO 4986

ISO 4986 Steel castings – Magnetic particle inspectionSteel castings – Magnetic particle inspection ISO 4991

ISO 4991 Steel castings or pressure purposesSteel castings or pressure purposes ISO 4998

ISO 4998 Continuous hot-dip zinc-coated carbon steel sheet o structural qualityContinuous hot-dip zinc-coated carbon steel sheet o structural quality ISO 5173

ISO 5173 Destructive tests on welds in metallic materials – Bend testsDestructive tests on welds in metallic materials – Bend tests ISO 5256

ISO 5256 Steel pipes and ttings or buried or submerged pipe lines – External and internal coatingSteel pipes and ttings or buried or submerged pipe lines – External and internal coating by bitumen or coal tar derived materials

by bitumen or coal tar derived materials ISO 5817

ISO 5817 Arc welded joints in steel – Guidance on quality levels or imperections. (identical to ENArc welded joints in steel – Guidance on quality levels or imperections. (identical to EN 25817)

25817) ISO 6506–1

ISO 6506–1 Metallic materials – Brinell hardness test – Part 1: Test methodMetallic materials – Brinell hardness test – Part 1: Test method ISO 6506–2

ISO 6506–2 Metallic materials – Brinell hardness test – Part 2: Verication and calibration o testingMetallic materials – Brinell hardness test – Part 2: Verication and calibration o testing ISO 6506–3

ISO 6506–3 Metallic materials – Brinell hardness test – Part 3: Calibration o reerence blocksMetallic materials – Brinell hardness test – Part 3: Calibration o reerence blocks ISO 6507–1

ISO 6507–1 Metallic materials – Hardness test – Vickers test – Part 1: Test methodMetallic materials – Hardness test – Vickers test – Part 1: Test method ISO 6507–2

ISO 6507–2 Metallic materials – Vickers hardness test – Part 2: Verication o testing machinesMetallic materials – Vickers hardness test – Part 2: Verication o testing machines ISO 6507–3

ISO 6507–3 Metallic materials – Vickers hardness test – Part 3: Calibration o reerence blocksMetallic materials – Vickers hardness test – Part 3: Calibration o reerence blocks ISO 6508–1

ISO 6508–1 Metallic materials – Rockwell hardness test – Part 1: Test method (scales A, B, C, D, E, F, G,Metallic materials – Rockwell hardness test – Part 1: Test method (scales A, B, C, D, E, F, G, H, K, N, T)

H, K, N, T) ISO 6508–2

ISO 6508–2 Metallic materials – Rockwell hardness test – Part 2: Verication and calibration o testingMetallic materials – Rockwell hardness test – Part 2: Verication and calibration o testing machines (scale

machines (scale s A, B, C, D, E, F, Gs A, B, C, D, E, F, G, H, K, N, T), H, K, N, T) ISO 6508–3

ISO 6508–3 Metallic materials – Rockwell hardness test – Part 3: Calibration o reerence blocks (scalesMetallic materials – Rockwell hardness test – Part 3: Calibration o reerence blocks (scales A, B, C, D, E, F, G, H, K, N, T)

A, B, C, D, E, F, G, H, K, N, T) ISO 6520–1

ISO 6520–1 Welding and allied processes – Classication o geometric imperections in metallic materi-Welding and allied processes – Classication o geometric imperections in metallic materi-als – Part

als – Part 1: Fusion welding1: Fusion welding ISO 6520–2

ISO 6520–2 Welding and allied processes – Classication o geometric imperections in metallic materi-Welding and allied processes – Classication o geometric imperections in metallic materi-als – Part 2: Welding with pressure

als – Part 2: Welding with pressure ISO 6761

ISO 6761 Steel tubes – Preparation o ends o tubes and ttings or weldingSteel tubes – Preparation o ends o tubes and ttings or welding ISO 6892

ISO 6892 Metallic material – Tensile testing at ambient temperatureMetallic material – Tensile testing at ambient temperature ISO 6929

ISO 6929 Steel products – Denitions and classicationSteel products – Denitions and classication ISO 6947

ISO 6947 Welds – Working positions – Denitions o angles o slope and rotationWelds – Working positions – Denitions o angles o slope and rotation ISO 7005–1

ISO 7005–1 Metallic fanges – Part 1: Steel fangesMetallic fanges – Part 1: Steel fanges ISO 7005–2

ISO 7005–2 Metallic fanges – Part 2: Cast iron fangesMetallic fanges – Part 2: Cast iron fanges ISO 7005–3

ISO 7005–3 Metallic fanges – Part 3: Copper alloy and composite fangesMetallic fanges – Part 3: Copper alloy and composite fanges ISO 7438

ISO 7438 Metallic materials – Bend testMetallic materials – Bend test ISO 7500–1

ISO 7500–1 Metallic materials – Verication o static uniaxial testing machines – Part 1: Tension/compres-Metallic materials – Verication o static uniaxial testing machines – Part 1: Tension/compres-sion testing machines – Verication and calibration o the orce-measuring system

sion testing machines – Verication and calibration o the orce-measuring system ISO 7963

ISO 7963 Welds in steel – Calibration block no. 2 or ultrasonic examination o weldsWelds in steel – Calibration block no. 2 or ultrasonic examination o welds ISO 8062

(14)

ISO 8491

ISO 8491 Metallic materials – Tube (in ull section) – Bend testMetallic materials – Tube (in ull section) – Bend test ISO 8492

ISO 8492 Metallic materials – Tube – Flattening testMetallic materials – Tube – Flattening test ISO 8501–1

ISO 8501–1 Preparation o steel substrates beore application o paints and related products – VisualPreparation o steel substrates beore application o paints and related products – Visual assessment o surace cleanliness – Part 1: Rust grades and preparation grades o uncoated assessment o surace cleanliness – Part 1: Rust grades and preparation grades o uncoated steel substrates and o steel substrates ater overall removal o previous coatings. Inormative steel substrates and o steel substrates ater overall removal o previous coatings. Inormative supplement to part 1: Representative photographic examples o the change o appearance supplement to part 1: Representative photographic examples o the change o appearance imparted to steel when blast-cleaned with dierent abrasives

imparted to steel when blast-cleaned with dierent abrasives ISO 8501–3

ISO 8501–3 Part Part 3: 3: Assessment Assessment o o dust dust on on steel steel suraces suraces prepared prepared or or painting painting (pressure (pressure sensitivesensitive tape method).

tape method). ISO 8501–6

ISO 8501–6 Part Part 6: 6: ExtractioExtraction n o o soluble soluble contaminants contaminants or or analysis analysis – – The The Bresle Bresle method.method. ISO 8502–9

ISO 8502–9 Preparation o steel substrates beore application o paints and related products – Test orPreparation o steel substrates beore application o paints and related products – Test or the assessment o surace cleanliness – Part 9: Field method or the conductometric the assessment o surace cleanliness – Part 9: Field method or the conductometric determi-nation o water-soluble salts.

nation o water-soluble salts. ISO 8503

ISO 8503 Preparation o steel substrates beore application o paints and related products – SuracePreparation o steel substrates beore application o paints and related products – Surace roughness characteristics o blast cleaned substrates.

roughness characteristics o blast cleaned substrates. ISO 8504–2

ISO 8504–2 Preparation o steel substrates beore application o paints and related products – SuracePreparation o steel substrates beore application o paints and related products – Surace preparation methods – Part 2: Abrasive blast cleaning.

preparation methods – Part 2: Abrasive blast cleaning. ISO 9015–1

ISO 9015–1 Destructive tests on welds in metallic materials – Hardness testing – Part 1: Hardness test onDestructive tests on welds in metallic materials – Hardness testing – Part 1: Hardness test on arc welded joints

arc welded joints ISO 9015–2

ISO 9015–2 Destructive tests on welds in metallic materials – Hardness testing – Part 2: MicrohardnessDestructive tests on welds in metallic materials – Hardness testing – Part 2: Microhardness testing o welded joints

testing o welded joints ISO 9303

ISO 9303 Seamless and welded (except submerged arc-welded) steel tubes or pressure purposes –Seamless and welded (except submerged arc-welded) steel tubes or pressure purposes – Full peripheral ultrasonic testing or the detection o longitudinal imperections

Full peripheral ultrasonic testing or the detection o longitudinal imperections ISO 9304

ISO 9304 Seamless and welded (except submerged arc-welded) steel tubes or pressure purposes –Seamless and welded (except submerged arc-welded) steel tubes or pressure purposes – Eddy current testing or the detection o imperections

Eddy current testing or the detection o imperections ISO 9305

ISO 9305 Seamless steel tubes or pressure purposes – Full peripheral ultrasonic testing or the detec-Seamless steel tubes or pressure purposes – Full peripheral ultrasonic testing or the detec-tion o transverse imperecdetec-tions

tion o transverse imperections ISO 9327–1

ISO 9327–1 Steel orgings and rolled or orged bars or pressure purposes – Technical delivery condi-Steel orgings and rolled or orged bars or pressure purposes – Technical delivery condi-tions – Part 1: General requirements

tions – Part 1: General requirements ISO 9327–2

ISO 9327–2 Steel orgings and rolled or orged bars or pressure purposes – Technical delivery con-Steel orgings and rolled or orged bars or pressure purposes – Technical delivery con-ditions – Part 2: Non-alloy and alloy (Mo, Cr and CrMo) steels with specied elevated ditions – Part 2: Non-alloy and alloy (Mo, Cr and CrMo) steels with specied elevated temperature properties

temperature properties ISO 9327–3

ISO 9327–3 Steel orgings and rolled or orged bars or pressure purposes – Technical delivery condi-Steel orgings and rolled or orged bars or pressure purposes – Technical delivery condi-tions – Part 3: Nickel steels with specied low temperature properties

tions – Part 3: Nickel steels with specied low temperature properties ISO 9327–4

ISO 9327–4 Steel orgings and rolled or orged bars or pressure purposes – Technical delivery condi-Steel orgings and rolled or orged bars or pressure purposes – Technical delivery condi-tions – Part 4: Weldable ne grain steels with high proo strength

tions – Part 4: Weldable ne grain steels with high proo strength ISO 9327–5

ISO 9327–5 Steel orgings and rolled or orged bars or pressure purposes – Technical delivery condi-Steel orgings and rolled or orged bars or pressure purposes – Technical delivery condi-tions – Part 5: Stainless steels

tions – Part 5: Stainless steels ISO 9328–2

ISO 9328–2 Steel plates and strips or pressure purposes – Technical delivery conditions – Part 2: Unal-Steel plates and strips or pressure purposes – Technical delivery conditions – Part 2: Unal-loyed and low-alUnal-loyed steels with specied room temperature and elevated temperature loyed and low-alloyed steels with specied room temperature and elevated temperature properties

properties ISO 9328–3

ISO 9328–3 Steel plates and strips or pressure purposes – Technical delivery conditions – Part 3: Nickel-Steel plates and strips or pressure purposes – Technical delivery conditions – Part 3: Nickel-alloyed steels with specied low temperature properties

alloyed steels with specied low temperature properties ISO 9328–4

ISO 9328–4 Steel plates and strips or pressure purposes – Technical delivery conditions – Part 4: Weld-Steel plates and strips or pressure purposes – Technical delivery conditions – Part 4: Weld-able ne grain steels with high proo stress supplied in the normalized or quenched and able ne grain steels with high proo stress supplied in the normalized or quenched and tempered condition

tempered condition ISO 9328–5

ISO 9328–5 Steel plates and strips or pressure purposes – Technical delivery conditions – Part 5: Auste-Steel plates and strips or pressure purposes – Technical delivery conditions – Part 5: Auste-nitic steels

nitic steels ISO 9329–1

ISO 9329–1 Seamless steel tubes or pressure purposes – Technical delivery conditions – Part 1: Unal-Seamless steel tubes or pressure purposes – Technical delivery conditions – Part 1: Unal-loyed steels with specied room temperature properties

loyed steels with specied room temperature properties ISO 9329–2

ISO 9329–2 Seamless steel tubes or pressure purposes – Technical delivery conditions – Part 2: Unal-Seamless steel tubes or pressure purposes – Technical delivery conditions – Part 2: Unal-loyed and alUnal-loyed steels with specied elevated temperature properties

loyed and alloyed steels with specied elevated temperature properties ISO 9329–3

ISO 9329–3 Seamless steel tubes or pressure purposes – Technical delivery conditions – Part 3: Unal-Seamless steel tubes or pressure purposes – Technical delivery conditions – Part 3: Unal-loyed and alUnal-loyed steels with specied low temperature properties

loyed and alloyed steels with specied low temperature properties ISO 9329–4

ISO 9329–4 Seamless steel tubes or pressure purposes – Technical delivery conditions – Part 4: Auste-Seamless steel tubes or pressure purposes – Technical delivery conditions – Part 4: Auste-nitic stainless steels

nitic stainless steels ISO 9402

ISO 9402 Seamless and welded (except submerged arc-welded) steel tubes or pressure purposes –Seamless and welded (except submerged arc-welded) steel tubes or pressure purposes – Full peripheral magnetic transducer/fux leakage testing o erromagnetic steel tubes or the Full peripheral magnetic transducer/fux leakage testing o erromagnetic steel tubes or the detection o longitudinal imperections

detection o longitudinal imperections ISO 9598

ISO 9598 Seamless steel tubes or pressure purposes – Full peripheral magnetic transducer/fux leak-Seamless steel tubes or pressure purposes – Full peripheral magnetic transducer/fux leak-age testing o erromagnetic steel tubes or the detection o transverse imperections age testing o erromagnetic steel tubes or the detection o transverse imperections ISO 9606–1