• No results found

Capacitive Model and S Parameters of Double Pole Four Throw Double Gate RF CMOS Switch

N/A
N/A
Protected

Academic year: 2020

Share "Capacitive Model and S Parameters of Double Pole Four Throw Double Gate RF CMOS Switch"

Copied!
8
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 5because the insertion loss is conquered by its ON-resistance
Figure 5. Capacitive model of the DP4T DG RF CMOS switch at ON state.
Figure 7. Measurements of S11 and S22, for DP4T DG RF CMOS switch.

References

Related documents

The primary endpoint was the correlation between immediate response of forced expiratory volume in 1 s (FEV 1 ) post-inhalation of salbutamol (400 μ g) at study entry and the

This systematic review demonstrates that people with moderate to severe COPD who are participating in pul- monary rehabilitation can achieve high exercise intensities

The main of aim of this work is to study different types of fins to improve heat transfer rate of cooling fins by changing cylinder fin geometry..

Passed time until complete analysis result was obtained with regard to 4 separate isolation and identification methods which are discussed under this study is as

• In contrast to the nozzles previously used on the swirl burner, which require the fuel to be pumped at high pressure to get good atomization, the salamander burner uses a Siphon

violent victimization is likely a social construction from crime media as the majority of. onscreen offenses are violent in

Thepresence of redundant constraints does not alter the optimumsolution(s), but may consume extra computational effort.Many researchers have proposed algorithms for

Analy- sis of this material was performed via experimental data collected from a Brüel & Kjær Impedance / Transmission Loss Measurement Tube Type 4206A system to analyze the