• No results found

Preparation of WC SiC Whisker Composites by Hot Pressing and Their Mechanical Properties

N/A
N/A
Protected

Academic year: 2020

Share "Preparation of WC SiC Whisker Composites by Hot Pressing and Their Mechanical Properties"

Copied!
6
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Fig. 1Relative peak intensity of products in the WC-SiCW compositessintered at 1650�C.
Fig. 4Microstructures of the WC-SiCW composites sintered at 1650�C (backscattered electron images)
Fig. 8Relation between the Young’s modulus and the bulk density of theWC-30 vol% SiCW composites sintered at different temperatures.
Fig. 10Fracture toughness of the WC-SiCW composites.

References

Related documents

a MultiCP spectra amplified in the 80–94 ppm region, with the respective Gaussians/Lorentzians deconvolutions obtained in bagasse samples pretreated with 1% H 2 SO 4 and with 1%

aim of OTS is to use third sector organisations to transform public services through capacity building of the sector. This suggests that there is something to learn from

The present lateorogenic data and the data from the earlier intra-orogenic mafic intrusions (Mänttäri et al., 2006, Väisänen et al., 2012, Nevalainen, 2014) show that

The breeding efforts of the USDA cotton breed- ing program at Stoneville, MS have focused on broadening the genetic base of Upland cotton for im- proving agronomic

The CPL defines a Contribution to include a change or addition to an existing program licensed under the CPL, but excludes from this definition contributions “which: (i) are

When parties are active in a smaller Member State are more likely to have a higher percentage of incumbent members send to the European Parliament than larger Member States.

Using this system, we implement a simple health care application as an example to demon- strate this integrated role-based approach for modeling, designing and implementing

The electrochemical performance on the composites showed a dramatic improvement of the discharge specific capacity (measured at a discharge rate of C/25 and room