SIP Internet Telephony Gateway

(1)

VIP - 2 / 4 / 8 / 16 / 24 Series

Peer-to-Peer Quick Configuration for VIP-450

SIP Internet

Telephony Gateway

(2)

Scenarios explain: Peer-to-Peer Mode

We're using VIP-480 and VIP-450 to perform the calling party.

Please refer to the following descriptions and insert proper parameters configurations into the each device for establish the voice communications.

(3)

1 1

fill in a

fill in a ipip address into field each.address into field each.

IP Address :

IP Address : 192.168.0.2192.168.0.2 Subnet Mask :

Subnet Mask : 255.255.255.0255.255.255.0 Default IP gateway Address : Default IP gateway Address : 192.168.0.254

192.168.0.254 Remember click

Remember click Save The Save The Changes

Changes button after modify the button after modify the parameters, it will be display red parameters, it will be display red warning messages ,and then warning messages ,and then click

click REBOOTREBOOT given into effect to given into effect to the IP address.

the IP address.

2 2

VoIP Gateway Quick Configuration

Select the [

Select the [ Configure System Setting > IP Settings Configure System Setting > IP Settings ] of ] of VIPVIP--400 400 to to IP address for the gateway.

IP address for the gateway.

(4)

3 3

Add the remote gateway of

Add the remote gateway of VIPVIP--000000 Destination ID :

Destination ID : 99 IP Address :

IP Address : 192.168.0.1192.168.0.1 Port:

Port: 17201720

4 4

VoIP Gateway Quick Configuration

Select the [

Select the [ Dial Plan Settings > Dial Plan Settings > Remote_Destination_IPRemote_Destination_IP ] of ] of Gateway

Gateway to add remote host name for the gateway.to add remote host name for the gateway.

(5)

5 5

Add the hunt group of

Add the hunt group of VIPVIP--400400 Hunt Group ID :

Hunt Group ID : 99 Destination ID 0:

Destination ID 0: 99

VoIP Gateway Quick Configuration

Select the [

Select the [ Dial Plan Settings > Dial Plan Settings > HuntGroupHuntGroup ] of ] of Gateway Gateway to add to add hunt group for remote host.

hunt group for remote host.

6 6

(6)

7 7

Add the Telephone Number of

Add the Telephone Number of VIPVIP--000000 Telephone Number ():

Telephone Number ():1010 Hunt Group ID :

Hunt Group ID : 99 Min. Digits:

Min. Digits: 11 Max. Digits:

Max. Digits: 33 Strip Length:

Strip Length: 00 Append Prefix:

Append Prefix: NoneNone..

8 8

VoIP Gateway Quick Configuration

Select the [

Select the [ Dial Plan Settings > Telephone Dial Plan Settings > Telephone ] of Gateway ] of Gateway to add to add telephone number for the gateway.

telephone number for the gateway.

(7)

Please using telnet to setting the Port Please using telnet to setting the Port 1 / 3 auto answer and hotline number 1 / 3 auto answer and hotline number ITG>

ITG> set port 0 set port 0 fxofxo answer_afteranswer_after 11 ITG>

ITG> set port 2 set port 2 fxofxo answer_afteranswer_after 11 ITG>

ITG> set port 0 set port 0 dial_indial_in plarplar 101101 ITG>

ITG> set port 2 set port 2 dial_indial_in plarplar 100100 ITG>

ITG> configconfig activateactivate ITG>

ITG> configconfig storestore Note:

Note:

activate (Enable the modification) activate (Enable the modification) store (Save the modification) store (Save the modification)

9 9

VIP-450

VoIP Gateway Quick Configuration

(8)

10 10

11 11

VoIP Gateway Quick Configuration

Select the [

Select the [ Network Setup > WAN Setting Network Setup > WAN Setting ] of ] of VIPVIP--480 480 to IP to IP address for the gateway.

address for the gateway.

Please fill in a

Please fill in a ipip address into address into field each.

field each.

WAN Type Setting :

WAN Type Setting : Static IPStatic IP IP Address :

IP Address : 192.168.0.1192.168.0.1 Subnet Mask :

Subnet Mask : 255.255.255.0255.255.255.0 Default Router :

Default Router : 192.168.0.254192.168.0.254 Remember click

Remember click ApplyApply button button after modify the parameters.

after modify the parameters.

(9)

12 12

13 13

Select the [

Select the [AdvanceAdvance-->VoIP Basic>VoIP Basic] of ] of

Gateway Gateway

to to set up the Port Number

set up the Port Number

VoIP Gateway Quick Configuration

Use default port number Use default port number VoIP Protocol Setting:

VoIP Protocol Setting: SIPSIP Port 1

Port 1 100100 Port 2Port 2 101101 Port 3 Port 3 102102 Port 4 Port 4 103103

(10)

14 14

Outgoing no:

Outgoing no: 20x20x Length of Number:

Length of Number: 3 ~ 33 ~ 3

(The Number max/min allowed length you can dial ) (The Number max/min allowed length you can dial ) Destination IP/DNS:

Destination IP/DNS: 192.168.0.2192.168.0.2 (phone IP address )

(phone IP address ) Select the [

Select the [AdvanceAdvance-->Dialing Plan>Dialing Plan] of ] of

Gateway Gateway

to add to add the outgoing dial plan for gateway call to IP phone used.

the outgoing dial plan for gateway call to IP phone used.

VoIP Gateway Quick Configuration

15 15

(11)

16 16

Hot Line Number Setting:

Port 1 number : Port 1 number : 201201 Port 2 number : Port 2 number : 202202

When an incoming call into the FXO When an incoming call into the FXO or pick up the telephone handset or pick up the telephone handset (FXS), it should be dialing to the (FXS), it should be dialing to the setting number automatically.

setting number automatically.

Select the [

Select the [AdvanceAdvance-->Hot Line Setting >Hot Line Setting ] of ] of Gateway Gateway to set to set up the hot line number.

up the hot line number.

VoIP Gateway Quick Configuration

17 17

Click the [

Click the [Save ConfigurationSave Configuration] button to ] button to save configuration and [

save configuration and [Reboot]Reboot] System.System.

18 18

(12)

For example:

1. From VIP-480 FXS make call to remote VIP-450 FXS

Step 1. Please pick up the telephone handset when listen a dial-tone.

Step 2. Please input a number 201, 202

Step 3. And then the other side analog telephone should be ring at this time.

Step 4. it begin establish voice communication after pick up the handset.

Note :

If want to connected remote PSTN, please dialed 203 or 204, your should be get a dial- tone from remote VIP-450 FXO port.

2. From VIP-480 FXS make phone call via Hot-line

Step 1. You only pick up the telephone handset, that should be dialed automatically.

Step 3. Wait the other side pick up the handset to establish voice communication begin.

Note :

Assume you assign a hotline number for FXO of VIP-480, that should be auto answer and dialing to this number automatically when an incoming calls into the FXO interface.

VoIP Gateway Quick Configuration

(13)

For example:

3. From VIP-450 FXS make call to remote VIP-480

Step 1. Please pick up the telephone handset when listen a dial-tone.

Step 2. Please input a number 100 or 102

Step 4. it begin establish voice communication after pick up the handset.

Note :

1) If wan to connected remote PSTN (VIP-480), please dialed 101 or 103, that should be get a dial-tone from remote PSTN.

2) The Hot-Line dialing method of VIP-450 (Port 1, 3) please refer to the same step of VIP-480 previously.

3) The mentioned parameters and network settings in this sample be carefully modified to meet the real-world applications.

VoIP Gateway Quick Configuration

(14)