• No results found

An electrically driven cavity enhanced source of indistinguishable photons with 61% overall efficiency

N/A
N/A
Protected

Academic year: 2020

Share "An electrically driven cavity enhanced source of indistinguishable photons with 61% overall efficiency"

Copied!
7
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

FIG. 1. (a) Illustration of the indistinguishable-photon emitting diode based on a quantum dot (QD) micropillar cavitystructure
FIG. 2. Photon-autocorrelation analysis (HBT configuration) of an electrically triggered coupled QD-cavity device.(a) Exemplary coincidence histograms for increasing excitation repetition rate(highlighted in red) are depicted in (b) as a function ofemissio
FIG. 3. Hong-Ou-Mandel-type two-photon interference (TPI) experiment on the single-photon stream emitted by our deviceat a repetition rate of 487 MHz

References

Related documents

the hierarchically porous structure and high specific surface area of the HGCS, which led to the. intimate contact between the electrolyte and the electrode,

Notch1 and VEGFR-3 genetically interact to regulate embryonic vascular development . To determine if  Notch  and  VEGFR-3

o Pursuant to Florida Statutes 63.032(3): An "adoption entity" means the department, an agency, a child caring agency registered under Florida Statutes 409.176, an

The temperature dependence of the positive ion current collected during one run on Cl of the perspex triode 7.1(a) when a liquid surface separated the grid and collector G2 is

Therefore, the objective of this study was to produce cookies from blends of roasted, cooked, defatted, fermented and germinated sesame seed flour in composite

We have performed the procedures described in Attachment 1, which were agreed to by the management of the South Carolina Workers’ Compensation Commission (the Commission), on

 The investors, as main accounting information users need to know about the fair value in order to decide, because fair value expresses most accurately the present value of

The lumped frequency diplexer formed with a low-pass network and a high-pass network is used to reduce the chip dimension while operating at low frequency band and to improve