• No results found

Paper 01-2010-2

N/A
N/A
Protected

Academic year: 2020

Share "Paper 01-2010-2"

Copied!
12
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Table 1. Thermal and mechanical contact conditions
Fig. 1. Geometry and boundary conditions of the problem
Fig. 2. Thermo-mechanical cyclic load acting on the coating’s surface
Fig. 3. SERR variation for pure thermal cycling with thermal resistance R1
+2

References

Related documents

To better define consistent microbiome members within the coral mucus or tissue habitats from each species, two analyses were conducted: one analysis was based solely on the

The results of the current study were different from Klein and Roggendorf .,2001 They found that high KI67 labeling index in pilocytic astrocytoma However,

Thus, drawing from the wealth of studies that have looked at AC from the collective level (i.e., business unit and/or organizational level), in this paper, utilizing

In this study, we examined 34 independent GBs or GB facets, including: (A) 18 independent GB facets that have one lower-index terminal grain surface of the (100) plane with

In other words, focusing on energy services rather than energy consumption can greatly improve our understanding of energy consumption behavior, including the rebound effect (see

There has been much recent interest in the intergenerational transmission of economic status, but research on the parent-child wealth association has been sparse. This paper