Buyers Guide: Information required:

(1)

The company policy is one of continuous development, we therefore reserve the right to alter specifications, etc. without notice. Stock material may be collected from company depots for cash or by prior arrangement. Customers are advised to check availability For further information on other Expamet Company Products:

FENCING/SECURITY PRODUCTS Tel: +44 (0) 1429 867366 Fencing Security Cages TIMLOC EXPAMET BUILDING PRODUCTS Tel: +44 (0) 1405 765567 Cavity Trays EXPAMET BUILDING PRODUCTS Tel: +44 (0) 1429 866611 Metal Beads IRISH EXPAMET SALES OFFICE Westlink Industrial Estate, Kylemore Road, Ballyfermot,

Head Sales Office:

PO Box 14, Longhill Industrial Estate (North), Hartlepool TS25 1PR, England.

Tel: +44 (0) 1429 867388 • Fax: +44 (1429) 866795

E-mail: sales@expamet.co.uk • Web: www.expandedmetalcompany.co.uk

When ordering, please state:

1 Reference Number of Mesh (include any

alphabetical suffix)

2 Material e.g. Steel

3 Quantity of Sheets and/or Length of Coil

4 Sheet Size or Coil Width (LW dimension first).

The diagrams below illustrate this point

5 Raised or Flattened Mesh

6 Additional Processing or Special Finishes?

(Galvanised, Anodised, Powder Coated,

Plastic Coated)

The sheet above is:

2440mm LW x 1220mm SW

LWM: Long Way of Mesh Dimension

1. For conventional (raised) meshes with angled strands inclined from the

plane of the sheet. Dimensions from centre to centre of knuckles are shown.

2. For flattened meshes, which have been pressure rolled, resulting in

strands which are in the same plane as the sheet. Dimensions of the

aperture point to point are shown.

LWM denotes longest part of diamond SWM denotes shortest part of diamond

All standard sheet sizes are nominal (normally oversize). Mild Steel Edging Sections are on page 15.

Long Way of Mesh Pitch LW Nominal Short Way of Mesh SW Width Thickness Aperture dimension LW

Buyers Guide:

Information required:

Sheet Measurements:

The sheet above is:

1220mm LW x 2440mm SW

SWM: Short Way of Mesh Dimension

Conventional/Flattened Mesh Dimensions:

Knuckle Knuckle Aperture Dimension SW Width Thickness A Aluminium S Stainless Steel F Flattened AF Aluminium Flattened

SF Stainless Steel Flattened

AG Anodised Gold

Glossary of Mesh References:

LWA Long Way Aperture (Length of the Diamond for Flattened Mesh only)

SWA Short Way Aperture (Height of the Diamond for Flattened Mesh only)

LWD Long Way of the Diamond (measured from point to point horizontally)

SWD Short Way of the Diamond (measured from point to point vertically)

Swdt Strand Width (Width of Material Feed)

Kgm2 _{Kilograms per metre squared} % Open Area % of Sheet which is open

LWM Longest part of diamond

SWM Shortest part of diamond

Glossary of Table Suffixes:

Short Way

e.g. 1220mm

Long Way e.g. 2440mm

Long Way e.g. 1220mm

Short Way e.g. 2440mm

Expanded Steel Mesh Expanded Aluminium Mesh

Expanded Stainless Steel Mesh Spec 304/S15 Expanded Stainless Steel Mesh Spec 316/S31 Pre-Galvanised Steel

Key to materials:

(2)

(3)

Conventional Mesh

Expanded Steel Mesh

Expanded Aluminium Mesh

Expanded Stainless Steel Mesh Spec. 304/S15

Expanded Steel Mesh

Expanded Stainless Steel Mesh Spec. 316/S31

Open Area %

941MM

1.00 0.67 0.20 0.15 38 0.17/Lm 212 x Coil Ref. No. Mesh Size Centre - Centre mm LW SW Weight Kgs/Sht Sheet Size mm LWM x SWM Size of Strand mm W T

957MM

1.50 0.92 0.22 0.15 52 0.19/Lm 313 x Coil

926S

3.18 1.95 0.79 0.46 19 1.89 610 x 1070

927S

3.175 1.81 0.254 0.152 72 1.08 420 x 10mtrs

901A

3.18 1.81 0.28 0.32 69 1.65 610 x 10mtrs

707S

4.75 2.38 0.56 0.46 53 2.64 1250 x 1250

220

5.84 3.50 0.79 0.60 55 3.30 1250 x 1250

601A

5.84 3.50 0.79 0.56 55 1.06 1250 x 1250

602A

5.84 3.39 1.17 0.56 31 1.63 1250 x 1250

227S

5.84 3.39 0.81 0.46 52 2.70 1250 x 1250

228S

5.84 3.39 1.22 0.56 28 4.44 1250 x 1250

(4)

Edging Expanded Metal

Ref. No. Size_mm Thick_mm Gap_mm _{Length mm}Standard Weight_Kg/m

MILD STEEL EDGING SECTIONS

UF1

6.35 1.20 1.78 2490 0.13

OD split tube

Suitable for framing flattened Expamet up to and including 1.58mm

UF2

6.35 0.55 1.78 1905 0.07

UF3

12.70 0.90 1.78 2540 0.18

UF4

19.05 1.20 1.78 3810 0.38

UF5

31.75 1.20 1.78 3810 0.62

Suitable for framing flattened Expamet up to and including 3.18mm

UF6

12.70 0.90 3.30 2540 0.20

UF7

19.05 1.20 3.30 3810 0.38

UF8

31.75 1.20 3.30 3810 0.62

Suitable for framing conventional type Expamet expanded steel with strand widths of 2.39mm or under.

UF9

19.05 1.20 5.08 3810 0.38

UF10

31.75 1.20 5.08 3810 0.62

Suitable for framing conventional type Expamet expanded steel with strand widths of 4.75mm or under.

UF11

19.05 1.50 10.16 3810 0.45

UF12

25.40 1.50 10.16 3810 0.63

UF13

25.40 2.95 10.16 3810 1.20

UF14

38.10 1.50 10.16 3810 0.91

UF15

38.10 2.95 10.16 3810 1.79

Suitable for framing conventional type Expamet expanded steel with strand widths of 6.09mm or under. Can be used for framing expanded steel walkway grating ref. 2496. For full details see leaflet IP5.

UF16

14.29 1.50 12.70 3810 0.46

Suitable for framing 10g and 12g diameter welded mesh and expanded metal with strand widths up to 3.2mm

UF18

19.05 1.20 6.50 3810 0.42

UF19

31.75 1.20 6.50 3810 0.66

Edging Sections

You can use Expamet edging section to transform

standard sheets of mesh into a variety of functional

products, adding value and enhancing appearance

and appeal. Expamet edging section seals the edges

of the mesh sheet giving a barrier for fixing,

protecting or handling the finished sheets. Frames

are frequently used on stairtreads and window

guards. If you require advice on which edging

section to use for your specific application, please

contact our sales team

Benefits

Edging section is an economical way to make a

mesh sheet into a functional panel. Fabrication is

easy to perform and not time consuming, giving

cost savings via our economically developed

method.

Features

We offer a choice of 19 types of Edging Section in

Mild Steel, which have been specifically developed

for framing Expanded Metal Meshes. Edging

Section can be used on both flattened and

conventional / raised mesh.We offer a standard

stock lengths, as well as a made to order capability,

so non standard lengths are not a problem.

Ref. LF2 section for framing ‘angled strand’ type

expanded steel having strand widths of 2.40mm or

under and also flattened expanded steel. Standard

length 2500mm.

Ref. LF1 section for framing ‘angled strand’ type

expanded steel having strand widths of 4.75mm or

under. Standard length 2500mm.

Mild Steel ‘L’ Edging Sections

Weight kg/m 0.34 3mm 30mm 1.5mm

25mm

Weight kg/m 0.88

LF1

13mm

LF2

7mm

(5)

4896

79.4 23.8 6.35 4.5 65 41.14 2440 x 1220

2496

44.5 12.7 6.10 4.5 51 52.66 2440 x 1220

Walkway Mesh

Expanded Steel Mesh

Expanded Aluminium Mesh

Expanded Steel Mesh

60.96 25.4 Mesh Size Centre - Centre mm LW SW Open Area % Ref. No. Mesh Size Internal Aperture LWA SWA Weight Kgs/Sht Sheet Size mm LWM x SWM Size of Strand mm W T

2496A

44.5 12.7 5.82 4.7 52 18.46 2500 x 1250 121.92 33.86 Mesh Size Centre - Centre mm LW SW

4897

4899

4894

N7478

38.10 13.85 5.00 2.50 28 26.36 1220 x 1525

(6)

Conventional Mesh

Expanded Steel Mesh

Expanded Aluminium Mesh

Expanded Stainless Steel Mesh Spec. 304/S15

Expanded Steel Mesh

209

10.24 5.64 1.55 1.00 45 6.72 1250 x 1250

351A

10.24 5.64 1.55 0.90 45 2.09 1250 x 1250

351AG

10.24 5.64 1.55 0.90 45 2.09 1250 x 1250

203

10.24 5.64 0.79 0.60 72 2.04 1250 x 1250 Open Area % Ref. No. Mesh Size Centre - Centre mm LW SW Weight Kgs/Sht Sheet Size mm LWM x SWM Size of Strand mm W T

199

14.29 5.64 1.17 1.00 59 5.08 1250 x 1250

196S

14.29 5.54 1.33 0.90 52 5.40 1250 x 1250

197S

14.29 5.54 1.33 0.70 52 4.20 1250 x 1250

0798

19.05 7.43 1.70 1.00 54 11.22 2500 x 1250

0798A

19.05 7.43 1.70 0.90 54 3.5 2500 x 1250

0798S

19.05 7.26 1.71 0.90 53 10.66 2500 x 1250

1196

28.58 9.52 1.98 1.20 58 11.66 2440 x 1220

1196A

28.58 9.52 1.98 1.20 58 4.22 2500 x 1250

1296

30.48 11.72 2.36 1.20 66 11.28 2440 x 1220

1296A

30.48 11.72 2.36 1.20 60 4.09 2500 x 1250

(7)

Conventional Mesh

Expanded Steel Mesh

Expanded Aluminium Mesh

Expanded Stainless Steel Mesh Spec. 304/S15

Expanded Steel Mesh

Open Area % Ref. No. Mesh Size Centre - Centre mm LW SW Weight Kgs/Sht Sheet Size mm LWM x SWM Size of Strand mm W T

1299

30.48 11.72 1.19 1.20 80 5.72 2440 x 1220

1290S

30.48 11.72 1.83 0.90 69 7.03 2500 x 1250

1295

30.48 11.72 1.98 1.60 66 12.62 2440 x 1220

1295S

30.48 11.72 1.5 1.63 65 11.75 2500 x 1130

1294

30.48 11.72 2.36 1.60 60 15.06 2440 x 1220

1294A

30.48 11.72 2.36 1.60 60 5.47 2500 x 1250

1292

30.48 12.70 4.75 2.50 25 27.29 1220 x 1525

1598

38.10 16.93 2.31 1.20 73 7.65 2440 x 1220

1598A

38.10 16.93 2.31 1.20 73 2.78 2500 x 1250

1597

38.10 16.48 2.25 1.60 73 10.21 2440 x 1220

1597A

38.10 16.93 2.31 1.60 73 3.72 2500 x 1250

1595

38.10 16.93 3.08 1.60 64 13.60 2440 x 1220

1590S

38.10 16.48 1.91 1.50 77 8.55 2500 x 1250

(8)

1601F

16.00 13.5 0.92 1.00 85 1.65 1250 x 1250

◗

401

28.58 4.00 2.31 0.75 53 5.78 1250 x 1250

402

28.58 4.00 2.67 0.75 53 5.78 1250 x 1250

MINAR1

137.16 56.00 3.25 3.00 89 7.65 2340 x 1220

Shaped Mesh

Expanded Steel Mesh

MINARET

PARALLEL STRAND

Not actual size

SQUARE

Pre-Galvanised Steel

◗

Open Area % Ref. No. Mesh Size Centre - Centre mm LW SW Weight Kgs/Sht Sheet Size mm LWM x SWM Size of Strand mm W T Open Area % Ref. No. Mesh Size Centre - Centre mm LWA SWA Weight Kgs/Sht Sheet Size mm LWM x SWM Size of Strand mm W T

(9)

Shaped Mesh

Expanded Steel Mesh

Expanded Aluminium Mesh

Expanded Stainless Steel Mesh Spec. 316/S31

Expanded Steel Mesh

EXPERF

HEXAGON

Pre-Galvanised Steel

◗

N6659F

6.20 4.40 1.20 0.70 63 2.02 1250 x 2500

◗

N6664F

5.00 3.22 1.22 0.70 57 2.37 1250 x 2500

◗

N6912F

4.60 2.00 1.67 0.7 36 3.50 1250 x 2500

N7700F

12.00 11.80 2.50 1.50 3.570 70 1250 x 2500

1302F

2.92 2.41 0.86 0.60 1.970 58 1250 x 1250

◗

N7486F

6.71 3.60 1.20 0.70 2.206 60 1250 x 2500

HEX1

19.05 9.00 1.22 1.20 74 3.76 1250 x 1250

HEX2

25.40 12.00 1.27 1.20 78 3.18 1250 x 1250

N7699F

12.00 10.00 3.00 1.00 63 2.92 1250 x 2500

N7482F

6.40 3.13 1.40 1.20 53 1.52 1250 x 2500

N7484F

6.40 3.13 1.40 1.00 11.22 54 1250 x 2500 Open Area % Ref. No. Mesh Size Internal Aperture LWA SWA Weight Kgs/Sht Sheet Size mm LWM x SWM Size of Strand mm W T

◗

(10)

1576

38.10 16.93 4.75 3.00 44 39.29 2440 x 1220

2096

50.80 22.58 2.34 1.20 79 5.80 2440 x 1220

Conventional Mesh

Expanded Steel Mesh

Expanded Aluminium Mesh

Expanded Steel Mesh

2093

50.80 22.58 3.05 1.60 73 10.09 2440 x 1220

2091

50.80 22.58 2.52 2.50 78 13.00 2440 x 1220

2089

50.80 22.58 3.12 3.00 72 19.40 2440 x 1220

2089A

50.80 22.58 3.12 3.00 72 7.59 2500 x 1250

(11)

3398

85.73 39.33 2.59 2.50 94 7.71 2440 x 1220

3092

76.20 33.87 3.58 3.00 79 14.79 2440 x 1220

2088

50.80 22.58 3.89 3.00 66 24.08 2440 x 1220

Conventional Mesh

Expanded Steel Mesh

(12)

3395F

76.96 32.77 3.81 1.85 81 8.33 2440 x 1220

3394F

69.85 37.08 5.49 2.16 77 11.81 1220 x 2440

3393F

77.47 27.18 6.53 2.82 68 21.19 2440 x 1220

Flattened Mesh

Expanded Steel Mesh

Open Area % Ref. No. Mesh Size Internal Aperture LWA SWA Weight Kgs/Sht Sheet Size mm LWM x SWM Size of Strand mm W T

(13)

2489F

46.99 15.49 6.63 4.20 54 44.08 1220 x 2440

{

2074F

39.12 18.29 4.72 2.74 66 22.47 1220 x 2440 12.64 915 x 1830

2074AF

40.64 17.78 4.04 3.00 79 8.81 1250 x 2500

N7622F

43.00 15.60 4.39 2.69 64 7.55 1220 x 2440

2077F

43.18 17.27 3.23 1.45 73 9.64 2440 x 1220

2077AF

42.93 17.02 3.12 1.45 73 3.40 2500 x 1250

2076F

43.43 18.03 2.31 1.14 80 5.50 2440 x 1220

Flattened Mesh

Expanded Steel Mesh

Expanded Aluminium Mesh

Expanded Steel Mesh

{

2073F

42.93 14.22 4.60 2.69 61 25.57 2440 x 1220 14.38 18.30 x 915 Open Area % Ref. No. Mesh Size Internal Aperture LWA SWA Weight Kgs/Sht Sheet Size mm LWM x SWM Size of Strand mm W T

(14)

4097

101.60 50.80 3.35 3.00 87 9.25 2440 x 1220

3396

85.73 40.64 3.18 3.00 84 10.92 2440 x 1220

Conventional Mesh

Expanded Steel Mesh

4599

114.30 39.33 4.58 3.00 77 16.31 2440 x 1220

(15)

Flattened Mesh

Expanded Steel Mesh

Expanded Aluminium Mesh

Expanded Stainless Steel Mesh Spec. 304/S15

Expanded Steel Mesh

706F

2.79 0.81 0.76 0.58 35 4.70 1250 x 1250

226F

3.81 2.03 0.79 0.58 56 3.30 1250 x 1250

228SF

3.00 1.00 1.22 0.56 29 4.44 1250 x 1250

217F

6.85 3.56 1.30 0.94 52 9.38 1250 x 2500

217AF

6.86 3.56 1.27 0.89 58 3.00 1250 x 2500

0794F

14.22 4.83 1.85 0.96 52 10.31 1250 x 2500

0794AF

13.97 4.83 1.80 0.89 57 3.22 1250 x 2500

0794SF

14.22 4.58 1.83 0.86 54 4.70 1250 x 1250

197SF

10.50 3.50 1.33 0.70 57 4.20 1250 x 1250

1276SF

25.00 8.00 1.98 1.09 67 9.15 2500 x 1250 Open Area % Ref. No. Mesh Size Internal Aperture LWA SWA Weight Kgs/Sht Sheet Size mm LWM x SWM Size of Strand mm W T

(16)

Flattened Mesh

Expanded Steel Mesh

Expanded Aluminium Mesh

Expanded Stainless Steel Mesh Spec. 304/S15

Expanded Steel Mesh

Pre-Galvanised Steel

◗

1280F

24.38 7.11 2.39 1.14 57 10.8 2440 x 1220

1280AF

24.13 6.86 2.39 1.14 59 3.94 2500 x 1250

1282F

24.38 7.62 2.08 1.14 60 9.43 2440 x 1220

N0921F

25.15 8.64 1.65 0.94 70 5.58 2440 x 1070

◗

1281F

24.38 7.87 2.06 1.47 66 12.11 2440 x 1220

1279F

23.11 5.84 3.20 1.52 48 18.66 2440 x 1220

1584F

32.77 10.92 3.18 1.50 63 13.12 2440 x 1220

1585F

33.53 12.45 2.34 1.14 73 7.35 2440 x 1220

1585AF

33.05 11.94 2.34 1.14 72 2.66 2500 x 1250 Open Area % Ref. No. Mesh Size Internal Aperture LWA SWA Weight Kgs/Sht Sheet Size mm LWM x SWM Size of Strand mm W T