• No results found

91751131 Solucionario Capitulo 15 Paul E Tippens

N/A
N/A
Protected

Academic year: 2021

Share "91751131 Solucionario Capitulo 15 Paul E Tippens"

Copied!
21
0
0

Loading.... (view fulltext now)

Full text

(1)

Chapter 15. FLUIDS

Density

15.1. What volume does 0.4 kg of alcohol occupy? What is the weight of this volume?

2 m 0.4 kg ; V= 790 kg/m m V ρ ρ = = ; V = 5.06 x 10-4 m3 W = DV = ρgV = 790 kg/m3)(9.8 m/s2)(5.06 x 10-4 m3); W = 3.92 N

15-2. An unknown substance has a volume of 20 ft3 and weighs 3370 lb. What are the weight density and the mass density?

3 3370 lb 20 ft W D V = = ; D = 168 lb/ft3 3 2 168 lb/ft 9.8 m/s D g ρ = = ; ρ = 5.27 slugs/ft3

15-3. What volume of water has the same mass of 100 cm3 of lead? What is the weight density of lead?

First find mass of lead: m = ρV = (11.3 g/cm3)(100 cm3); m = 1130 g

Now water: 3 3 1130 g 1130 cm 1 g/cm w w m V ρ = = = ; Vw = 1130 cm3 D = ρg D = (11,300 kg/m3)(9.8 m/s2) = 110,740 N/m3; D = 1.11 x 105 N/m3

15-4. A 200-mL flask (1 L = 1 x 10-3 m3) is filled with an unknown liquid. An electronic balance indicates that the added liquid has a mass of 176 g. What is the specific gravity of the liquid? Can you guess the identity of the liquid?

V = 200 mL = 0.200 L = 2 x 10-4 m3; m = 0.176 kg 4 3 0.176 kg 2 x 10 m m V ρ= = ; ρ = 880 kg/m3, Benzene 203

(2)

Fluid Pressure

15-5. Find the pressure in kilopascals due to a column of mercury 60 cm high. What is this pressure in lb/in.2 and in atmospheres?

P = ρgh = (13,600 kg/m3)(9.8 m/s2)(0.60 m); P = 80 kPa 2 0.145 lb/in. 80 kPa ; 1 kPa P=    P = 11.6 lb/in. 2 80 kPa 101.3 kPa/atm P= ; P = 0.790 atm

15-6. A pipe contains water under a gauge pressure of 400 kPa. If you patch a 4-mm-diameter hole in the pipe with a piece of tape, what force must the tape be able to withstand?

2 2 -5 2 (0.004 m) 1.257 x 10 m 4 4 D A=π =π = ; P F; A = F = PA = (400,000 Pa)(1.257 x 10-5 m2); P = 5.03 N

15-7. A submarine dives to a depth of 120 ft and levels off. The interior of the submarine is maintained at atmospheric pressure. What are the pressure and the total force applied to a hatch 2 ft wide and 3 ft long? The weight density of sea water is around 64 lb/ft.3

P = Dh = (64 lb/ft3)(120 ft); P = 7680 lb/ft2; P = 53.3 lb/in.2

F = PA = (7680 lb/ft2)(3 ft)(2 ft); F = 46,100 lb

15-8. If you constructed a barometer using water as the liquid instead of mercury, what height of water would indicate a pressure of one atmosphere?

3 2 101,300 Pa ; (1000 kg/m )(9.8 m/s ) P P gh h g ρ ρ = = = ; h = 10.3 m or 34 ft ! 204

(3)

15-9. A 20-kg piston rests on a sample of gas in a cylinder 8 cm in diameter. What is the gauge pressure on the gas? What is the absolute pressure?

2 2 -3 2 (0.08 m) 5.027 x 10 m 4 4 D A=π =π = ; P F mg A A = = 2 4 -3 2 (20 kg)(9.8 m/s ) 3.90 x 10 kPa; 5.027 x 10 m P= = P = 39.0 kPa

Pabs = 1 atm + Pgauge = 101.3 kPa + 39.0 kPa; Pabs = 140 kPa

*15-10. An open U-shaped tube such as the one in fig. 15-21 is 1 cm2 in cross-section. What volume of water must be poured into the right tube to cause the mercury in the left tube to rise 1 cm above its original position?

3 2 2 2 3 2 (13.6 g/cm )(1 cm) ; 13.6 cm 1 g/cm m m m m h gh gh h ρ ρ ρ ρ = = = = V = Ah = (1 cm2)(13.6 cm); V = 13.6 cm3 or 13.6 mL

15-11. The gauge pressure in an automobile tire is 28 lb/in.2. If the wheel supports 1000 lb, what area of the tire is in contact with the ground?

2 1000 lb 28 lb/in. F A P = = ; A = 35.7 in.2

12. Two liquids that do not react chemically are placed in a bent tube like the one in Fig. 15-21. Show that the heights of the liquids above their surface of separation are inversely

proportional to their densities: 1 2

2 1 h h ρ ρ =

The gauge pressure must be the same for each column: ρ1gh1 = ρ2gh2 So that:

(4)

1 2 2 1 h h ρ ρ =

15-13. Assume that the two liquids in the U-shaped tube in Fig. 15-21 are water and oil. Compute the density of the oil if the water stands 19 cm above the interface and the oil stand 24 cm above the interface. Refer to Prob. 15-12.

3 1 2 2 1 (19 cm)(1000 kg/m ) ; 24 cm w w oil oil h h h h ρ ρ ρ ρ = = = ; ρoil = 792 kg/m3

15-14. A water-pressure gauge indicates a pressure of 50 lb/in.2 at the foot of a building. What is the maximum height to which the water will rise in the building?

2 2 2 2 (50 lb/in. )(144 in. /ft ) ; 62.4 lb/ft ) P P Dh h D = = = ; h = 115 ft

The Hydraulic Press

15-15. The areas of the small and large pistons in a hydraulic press are 0.5 and 25 in.2,

respectively. What is the ideal mechanical advantage of the press? What force must be exerted to lift a ton? Through what distance must the input force move, if the load is lifted a distance of 1 in.? [1 ton = 2000 lb ]

2 2 25 in. 0.5 in. o I i A M A = = ; MI = 50 2000 lb 50 i F = ; Fi = 40.0 lb si = MI so = (50)(1 in.); si = 50 in.

15-16. A force of 400 N is applied to the small piston of a hydraulic press whose diameter is 4 cm. What must be the diameter of the large piston if it is to lift a 200-kg load?

2 2 2 (200 kg)(9.8 m/s ) ; (4 cm) 400 N o o o o o i i i i i F A d F d d F = A =d = F = ; 206

(5)

do = 8.85 cm

15-17. The inlet pipe that supplies air pressure to operate a hydraulic lift is 2 cm in diameter. The output piston is 32 cm in diameter. What air pressure (gauge pressure) must be used to lift an 1800-kg automobile. 2 2 (1800 kg)(9.8 m/s ) ; (0.16 m) o i o i o F P P P A π = = = ; Pi = 219 kPa

15-18. The area of a piston in a force pump is 10 in.2. What force is required to raise water with the piston to a height of 100 ft? [ 10 in.2(1 ft2/144 in.2) = 0.0694 ft2 ]

F = PA = (Dh)A; F = (62.4 lb/ft3)(100 ft)(0.0694 ft2); F = 433 lb

Archimedes’ Principle

*15-19. A 100-g cube 2 cm on each side is attached to a string and then totally submerged in water. What is the buoyant force and what is the tension in the rope?

V = (0.02 m)3 = 8 x 10–6 m3; m = 0.100 kg; FB = ρgV

FB = (1000 kg/m3)(9.8 m/s2)(8 x 10-6 m3); FB = 0.0784 N ΣFy = 0; T + FB – mg = 0; T = mg – FB ;

T = (0.100 kg)(9.8 m/s2) – 0.0784 N; T = 0.980 N – 0.0784 N; T = 0.902 N

*15-20. A solid object weighs 8 N in air. When it is suspended from a spring scale and

submerged in water, the apparent weight is only 6.5 N. What is the density of the object?

2 8 N ; 0.816 kg 9.8 m/s W m m g = = = m V ρ =

To find density, we need to know the volume V of the block which is the same as the volume of the water displaced.

FB = 8 N – 6.5 N; FB = 1.5 N; FB = ρgV; 3 2 1.50 N (1000 kg/m )(9.8 m/s ) B F V g ρ = = 207 mg FB T T 8 N FB T T=6.5 N

(6)

-4 3 -4 3 0.816 kg 1.53 x 10 m ; 1.53 x 10 m m V V ρ = = = ; ρ = 5333 kg/m3

*15-21. A cube of wood 5.0 cm on each edge floats in water with three-fourths of its volume submerged. (a) What is the weight of the cube? (b) What is the mass of the cube? (c) What is the specific gravity of the wood? [ V = (0.05 m)3 = 1.25 x 10–4 m3 ]

The volume of water displaced is ¾ of the volume of the block: VD = ¾(1.25 x 10-4 m3) = 9.38 x 10-5 m3 FB = W

FB = ρgVD = (1000 kg/m3)(9.8 m/s2)(9.38 x 10-5 m3) = 0.919 N

The weight is the same as the buoyant force if the block floats: W = 0.919 N

2 0.919 N 9.8 m/s W m g = = ; m = 0.0938 kg or m = 93.8 g Specific gravity: 3 3 4 3 (125 cm ) 125 cm w w mV mV ρ ρ = = ; Specific gravity = 0.75

*15-22. A 20-g piece of metal has a density of 4000 kg/m3. It is hung in a jar of oil (1500 kg/m3) by a thin thread until it is completely submerged. What is the tension in the thread?

First find volume of metal from its mass and density:

3 -6 3 0.02 kg ; 5 x 10 m 4000 kg/m m m V V ρ ρ = = = = ; FB = ρgV FB = (1500 kg/m3)(9.8 m/s2)(5 x 10-6 m3); FB = 0.0735 N ΣFy = 0; T + FB – mg = 0; T = mg – FB ; mg = (0.02 kg)(9.8 m/s2) T = 0.196 N – 0.0735 N; T = 0.123 N

*15-23. The mass of a rock is found to be 9.17 g in air. When the rock is submerged in a fluid of density 873 kg/m3, its apparent mass is only 7.26 g. What is the density of this rock?

208 W FB mg FB T T

(7)

Apparent weight = true weight – buoyant force; mAg = mg – mfg

mA = m – mf ; mf = m - mA = 9.17 g – 7.26 g = 1.91 g

*15-23. (Cont.) The volume Vf displaced is found from the mass displaced: mf = 1.91 g -6 3 3 0.00191 kg 2.19 x 10 m 873 kg/m f f f m V ρ = = = ; Vf = Vrock = 2.19 x 10-6 m3 -3 -6 3 9.16 x 10 kg 2.19 x 10 m rock rock rock m V ρ = = ; ρrock = 4191 kg/m3

*15-24. A balloon 40 m in diameter is filled with helium. The mass of the balloon and attached basket is 18 kg. What additional mass can be lifted by this balloon?

First find volume of balloon: Vb = (4/3)πR3 = (4/3) π (20 m)3

Vb = 3.351 x 104 m3; FB = W

balloon + WHelium + Wadded

Fb = ρairgVb = (1.29 kg/m3)(9.8 m/s2)(3.351 x 104 m3) = 4.24 x 105 N WHe = ρgV = (0.178 kg/m3)(9.8 m/s2)(3.351 x 104 m3) = 5.845 x 104 N; Wb = m bg Wadd = FB – Wb – WHelium = 4.24 x 105 N – (18 kg)(9.8 m/s2) – 5.845 x 104 N Wadd = 3.65 x 105 N; 5 2 3.65 x 10 N 9.8 m/s add add W m g = = ; madd = 37,200 kg

The densities of air and helium were taken from Table 15-1 in the text.

Fluid Flow

15-25. Gasoline flows through a 1-in.-diameter hose at an average velocity of 5 ft/s. What is the rate of flow in gallons per minute? (1 ft3 = 7.48 gal). How much time is required to fill a 20-gal tank? [ A = πR2 = π(0.5 in.)2 = 7.854 in2(1 ft/144 in.2) = 5.454 x 10-3 ft2 ]

R = vA = (5 ft/s)(5.454 x 10-3 ft2) = 0.0273 ft3/s; 209 W b WL F B WHe

(8)

R = (0.0273 ft3/s)(7.48 gal/ft3)(60 s/min); R = 12.2 gal/min. 20 gal

12.2 gal/min

Time= ; Time = 1.63 min

15-26. Water flows from a terminal 3 cm in diameter and has an average velocity of 2 m/s. What is the rate of flow in liters per minute? ( 1 L = 0.001 m3. ) How much time is required to fill a 40-L container? [ A = π(0.015 m)2 = 7.07 x 10-4 m2 ; V = 40 L = 0.04 m3 ] R = vA = (2 m/s)(7.07 x 10-4 m2) = 1.41 x 10-3 m3/s 3 -3 3 0.04 m 1.41 x 10 m /s Time= ; Time = 28.3 s

15-27. What must be the diameter of a hose if it is to deliver 8 L of oil in 1 min with an exit velocity of 3 m/s? 3 -4 3 8 L 0.001 m 1 min 1.33 x 10 m /s 1 min 1 L 60 s R=  =     ; R = vA 2 -4 3 2 4 4(1.33 x 10 m /s) -4 2 ; 5.66 x 10 m 4 (3 m/s) D R R A D v v π π π = = = = = -4 2 5.66 x 10 m D= ; D = 7.52 x 10-3 m; D = 7.52 mm

15-28. Water from a 2-in. pipe emerges horizontally at the rate of 8 gal/min. What is the emerging velocity? What is the horizontal range of the water if the pipe is 4 ft from the ground?

3 2 2 3 12 2 8 gal 1 ft 1 min ( ft) 0.01782 ft /s; 0.0218 ft 1 min 7.48 gal 60 s 4 R=  = A=π =     3 2 0.01782 ft /s 0.0218 ft R v A = = ; v = 0.817 ft/s

To find the range x, we first find time to strike ground from: y = ½gt2

(9)

2 2 2(4 ft) 0.500 s 32 ft/s y t g = = = ; Now range is x = vxt Range: x = vt = (0.817 ft/s)(0.5 s); x = 0.409 ft or x = 4.90 in.

15-29. Water flowing at 6 m/s through a 6-cm pipe is connected to a 3-cm pipe. What is the velocity in the small pipe? Is the rate of flow greater in the smaller pipe?

A1v1 = A2v2 2 2 1 1 1 1 2 2 2 2 6 cm (6 m/s) 3 cm A v d v v A d   = = =    ; v2 = 24.0 m/s

The rate of flow is the same in each pipe.

Applications of Bernoulli’s Equation

15-30. Consider the situation described by Problem 15-29. If the centers of each pipe are on the same horizontal line, what is the difference in pressure between the two connecting pipes?

For a horizontal pipe, h1 = h2: P1 + ρgh1 +½ρv12 = P2 + ρgh2 + ½ρv22

P1 - P2 = ½ρv22 - ½ρv12 = ½ρ(v22 – v12); ρ = 1000 kg/m3

P1 – P2 = ½(1000 kg/m3)[(24 m/s)2 – (6 m/s)2] = 2.70 x 105 Pa; ∆P = 270 kPa

15-31. What is the emergent velocity of water from a crack in its container 6 m below the surface? If the area of the crack is 1.2 cm2, at what rate of flow does water leave the container? [

The pressures are the same at top and at crack: P1 = P2 ]

P1 + ρgh1 +½ρv12 = P2 + ρgh2 + ½ρv22;

ρgh1 +½ρv12 = ρgh2 + ½ρv22

Notice that ρ cancels out and recall that v1 can be considered as zero.

Setting v1 = 0, we have: ρgh1 = ρgh2 + ½ρv22 or v22 = 2g(h1 - h2)

v22 = 2(9.8 m/s2)(6 m); v2 = 10.8 m/s

(10)

A = (1.2 cm2)(1 x 10-4 m2/cm2) = 1.20 x 10-4 m2;

R = vA R = (10.84 m/s)(1.20 x 10-4 m2);

R = 1.41 x 10-3 m3/s or R = 1.41 L/s

15-32. A 2-cm-diameter hole is in the side of a water tank, and it is located 5 m below the water level in the tank. What is the emergent velocity of the water from the hole? What volume of water will escape from this hole in 1 min? [ Apply Torricelli’s theorem ]

2 2 2(9.8 m/s )(6 m) v= gh = ; v = 9.90 m/s 2 2 -5 2 (0.02 m) 3.18 x 10 m ; 4 4 D A=π =π = R = vA R = (9.90 m/s)(3.18 x 10-5 m2); R = 3.11 x 10-4 m3/s -4 3 3 3.11 x 10 m 60 s 1 L 1 s 1 min 0.001 m R=     ; R = 187 L/min

*15-33. Water flows through a horizontal pipe at the rate of 82 ft3/min. A pressure gauge placed on a 6-in. cross-section of this pipe reads 16 lb/in.2. What is the gauge pressure in a section of pipe where the diameter is 3 in.?

A1 = π(3 in.)2 = 28.3 in.2 = 0.1964 ft2 A1 = π(1.5 in.)2 = 7.07 in.2 = 0.0491 ft2 R1 = R2 = 82 ft3/min(1 min/60 s) = 1.37 ft3/s; v1A1 = v2A2 ; 3 3 1 2 2 2 1 2 1.37 ft /s 1.37 ft /s 6.959 ft/s; 27.84 ft/s 0.1964 ft 0.0491 ft R R v v A A = = = = = =

Now find absolute pressure: P1 = 16 lb/in.2 + 14.7 lb/in.2 = 30.7 lb/in.2;

212

2 1

3 in. 6 in.

(11)

2 2 1 2 2 lb 144 in. 30.7 4421 lb/ft in. 1 ft P ==

 (Absolute pressure pipe 1)

D = ρg; 3 3 2 62.4 lb/ft 1.95 slugs/ft 32 ft/s D g ρ = = =

Use consistent units for all terms: ft, slugs)

*15-33. (Cont.) P1 = 4421 lb/ft2; v1 = 6.959 ft/s; v 2 = 27.84 ft/s; ρ = 1.95 slugs/ft3; Since h1 = h2, P1 +½ρv12 = P2 + ½ρv22 and P2 = P1 + ½ρv12 - ½ρv22 2 3 2 3 2 2 4421 lb/ft ½(1.95 slugs/ft )(6.959 ft/s) ½(1.95 slugs/ft )(27.84 ft/s) P = + − P2 = 4421 lb/ft2 + 47.22 lb/ft2 – 755.7 lb/ft2; P2 = 3713 lb/ft2 2 2 2 2 2 lb 1 ft 3713 25.8 lb/in. ft 144 in. P = =

  (Absolute pressure in pipe 2)

Gauge pressure P2 = 25.8 lb/in.2 – 14.7 lb/in.2; P2 = 11.1 lb/in.2

*15-34. Water flows at the rate of 6 gal/min though an opening in the bottom of a cylindrical tank. The water in the tank is 16 ft deep. What is the rate of escape if an added pressure of 9 lb/in.2 is applied to the source of the water?

The rate of escape is proportional to the difference in pressure between input and output.

P = ρgh = Dh = (62.4 lb/ft3)(16 ft); P = 998.4 lb/ft2 = 6.933 lb/in.2

Thus, P of 6.933 lb/in.2 produces a rate of 6.0 gal/min. Now the new P is:

P’ = 6.933 lb/in.2 + 9 lb/in.2 = 15.93 lb/in.2, By ratio and proportion, we have

2 2 6 gal/min 15.93 lb/in. 6.933 lb/in. R = and R = 13.8 gal/min 213

(12)

*15-35. Water moves through a small pipe at 4 m/s under an absolute pressure of 200 kPa. The pipe narrows to one-half of its original diameter. What is the absolute pressure in the narrow part of the pipe? [ v1d12 = v2d22 ]

v1 = 4 m/s; 2 2 2 2 2 (4 m/s) 16 m/s d v d   = =   P1 +½ρv12 = P2 + ½ρv22 and P2 = P1 + ½ρv12 - ½ρv22 *15-35. (Cont.) P2 = P1 + ½ρv12 - ½ρv22; ρ = 1000 kg/m3; v1 = 4 m/s; v2 = 16 m/s 3 2 3 2 2 200,000 Pa ½(1000 kg/m )(4 m/s) ½(1000 kg/m )(16 m/s) P = + − P2 = 200,000 Pa + 8000 Pa – 128,000 Pa = 80,000 Pa; P2 = 80.0 kPa

*15-36. Water flows steadily through a horizontal pipe. At a point where the absolute pressure in 300 kPa, the velocity is 2 m/s. The pipe suddenly narrows, causing the absolute pressure to drop to 100 kPa. What will be the velocity of the water in this constriction?

P1 +½ρv12 = P2 + ½ρv22 ½ρv22 = P1 +½ρv12 – P2 ½(1000 kg/m3)v22 = 300,000 Pa + ½(1000 kg/m3)(2 m/s)2 – 100,000 Pa (500 kg/m3)v22 = 202,000 Pa; v 2 = 20.1 m/s

Challenge Problems

*15-37. Human blood of density 1050 kg/m3 is held a distance of 60 cm above an arm of a patient to whom it is being administered. How much higher is the pressure at this position than it would be if it were held at the same level as the arm?

P = ρgh = (1050 kg/m3)(9.8 m/s2)(0.6 m); P = 6.17 kPa 214 2 1 d2 d1 d1 2 1 d2 d1

(13)

*15-38. A cylindrical tank 50 ft high and 20 ft in diameter is filled with water. (a) What is the water pressure on the bottom of the tank? (b) What is the total force on the bott0m? (c) What is the pressure in a water pipe that is located 90 ft below the water level in the tank? (a) P = (62.4 lb/ft3)(50 ft) = 3120 lb/ft2 or 21.7 lb/in.2 (Gauge pressure)

(b) F = PA = (3120 lb/ft2)[π(10 ft)2]; F = 9.80 x 105 lb

(c) P = (63.4 lb/ft3)(90 ft) = 5616 lb/ft2; P = 39.0 lb/in.2 (Gauge pressure)

*15-39. A block of wood weighs 16 lb in air. A lead sinker with an apparent weight of 28 lb in water, is attached to the wood, and both are submerged in water. If their combined apparent weight in water is 18 lb, find the density of the wooden block?

FB = 28 lb + 16 lb – 18 lb = 26 lb; FB = DV 3 3 26 lb 0.417 ft 62.4 lb/ft B F V D = = = ; 16 lb 3 0.417 ft wood D = ; D = 38.4 lb/ft3

*5-40. A 100-g block of wood has a volume of 120 cm3. Will it float in water? Gasoline?

For water: FB = ρgh = (1000 kg/m3)(9.8 m/s2)(120 x 10-6 m3) = 1.176 N

W = mg = (0.1 kg)(9.8 m/s2) = 0.980 N FB > W YES

For gasoline: FB = ρgh = (680 kg/m3)(9.8 m/s2)(120 x 10-6 m3) = 0.800 N

W = mg = (0.1 kg)(9.8 m/s2) = 0.980 N FB < W NO

*15-41. A vertical test tube has 3 cm of oil (0.8 g/cm3) floating on 9 cm of water. What is the pressure at the bottom of the tube? [ PT = ροgho + ρωghw ]

PT = (800 kg/m3)(9.8 m/s2)(0.03 m) + (1000 kg/m3)(9.8 m/s2)(0.09 m)

PT = 235.2 Pa + 882 Pa = 1117 Pa; PT = 1.12 kPa

*15-42. What percentage of an iceberg will remain below the surface of seawater (ρ = 1030 kg/m3)?

215

FB

F

(14)

If iceberg floats, then: FB = mig and FB = ρωgVw mig = ρiVi g; therefore, ρiVi g = ρωgVw So that: 3 3 920 kg/m 0.893 1030 kg/m w i i w V V ρ ρ = = = or 89.3%

Thus, 89.3 percent of the iceberg remains underwater, hence the expression: “That’s just the tip of the iceberg.”

*15-43. What is the smallest area of ice 30 cm thick that will support a 90-kg man? The ice is floating in fresh water (ρ = 1000 kg/m3). [ V = Ah so that A = V/h ]

The question becomes: What volume of ice will support a 90-kg person? FB = Wice + Wman; FB = ρwgVw ; Wice = ρicegVice ; Wman = mg

ρwgVw = ρicegVice + mg; ( gravity divides out )

The smallest area occurs when the ice is level with the surface and Vice = Vw

ρwVw = ρiceVw + m or (1000 kg/m3)Vw – (920 kg/m3)Vw = 90 kg

Vw = 1.125 m3; Now since V = Ah, we have 3 1.125 m 0.300 m w V A h = = and A = 3.75 m2

*15-44. A spring balance indicates a weight of 40 N when an object is hung in air. When the same object is submerged in water, the indicated weight is reduced to only 30 N. What is the density of the object? [ FB = 40 N – 30 N = 10 N ]

FB = ρwgVw ; -3 3 3 2 10 N ; 1.02 x 10 m (1000 kg/m )(9.8 m/s ) B w w w F V V g ρ = = =

The volume of the object is the same as the water displaced: V = 1.02 x 10-3 m3

(15)

2 3 3 40 N 4.08 kg 4.08 kg; 9.8 m/s 1.02 x 10 m W m m g ρ V − = = = = = ρ = 4000 kg/m3

*15-45. A thin-walled cup has a mass of 100 g and a total volume of 250 cm 3. What is the maximum number of pennies that can be placed in the cup without sinking in the water? The mass of a single penny is 3.11 g.

FB = ρgV = mcg + mpg ; mp = ρV - mc; mp = (1 g/cm3)(250 cm3) - 100 g

mp = 150 g; Since each penny is 3.11 g, Nbr of pennies = 48 15-46. What is the absolute pressure at the bottom of a lake that is 30 m deep?

Pabs = 1 atm + ρgh = 101,300 Pa + (1000 kg/m3)(9.8 m/s2)(30 m); P = 395 kPa

15-47. A fluid is forced out of a 6-mm-diameter tube so that 200 mL emerges in 32 s. What is the average velocity of the fluid in the tube? [ R = vA ; 200 mL = 2 x 10-4 m3 ]

2 2 -5 2 (0.006 m) 2.83 x 10 m 4 4 d A=π =π = ; 2 x 10 m-4 3 6.25 x 10 m /s-6 3 32 s R= = -6 3 -5 2 6.25 x 10 m /s 2.83 x 10 m R v A = = ; v = 0.221 m/s

*15-48. A pump of 2-kW output power discharges water from a cellar into a street 6 m above. At what rate in liters per second is the cellar emptied?

2 2000 W ; 34.0 kg/s (9.8 m/s )(6 m) Fs mgh m Power Power t t t gh = = = = = Now, ρw = (1000 kg/m3)(0.001 m3/L) = 1 kg/L;

Therefore, 1 kg of water is one liter: Rate = 34.0 L/s

(16)

15-49. A horizontal pipe of diameter 120 mm has a constriction of diameter 40 mm. The velocity of water in the pipe is 60 cm/s and the pressure is 150 kPa (a) What is the velocity in the constriction? (b) What is the pressure in the constriction?

2 2 2 2 1 1 1 2 2 2 1 2 120 mm ; (60 cm/s) 40 mm d v d v d v v d     = = =     ; v2 = 540 cm/s P1 +½ρv12 = P2 + ½ρv22 and P2 = P1 + ½ρv12 - ½ρv22 3 2 3 2 2 150,000 Pa ½(1000 kg/m )(0.06 m/s) ½(1000 kg/m )(5.4 m/s) P = + − P2 = 150,000 Pa + 180 Pa – 14,580 Pa = 136,000 Pa; P2 = 136 kPa

*15-50. The water column in the container shown in Fig. 15-20 stands at a height H above the base of the container. Show that the depth h required to give the horizontal range x is given by

2 2

2 2

H H x

h= ± −

Use this relation to show that the holes equidistant above and

below the midpoint will have the same horizontal range? [ y = H – h ]

The emergent velocity vx is: vx = 2gh and x = vxt and y = ½gt2 2 2 ; 2 2 x x x x t t v gh gh

= = = ; ( Now substitute t2 into y = ½gt2 )

2 2 2 ½ ; ; 2 4 4 x gx gx y g y y H h gh h h = = = − =

Multiply both sides by “h” and rearrange: h2 - Hh + x2/4 = 0

Now, 2 4 2 b b ac h a − ± − = where a = 1, b = H, and c = 2 4 x 218 x h y H

(17)

2 4 /42 2 2 ;

2(1) 2 2

H H x H H x

h= ± − h= ± −

The midpoint is (H/2), and the ± term indicates the distance above and below that point.

*15-51. A column of water stands 16 ft above the base of its container. What are two hole depths at which the emergent water will have a horizontal range of 8 ft?

From Problem 15-50: 2 2 2 2 H H x h= ± − 2 2 (16 ft) (8 ft) 16 ft 8 ft 6.93 ft 2 2 h= ± − = ± ; h = 1.07 ft and 14.9 ft

*15-52. Refer to Fig. 15-20 and Problem 15-50. Show that the horizontal range is given by

2 ( )

x= h H h

Use this relation to show that the maximum range is equal to the height H of the water column.

From Problem 15-50: H – h = x2/4h or x2 = 4hH – 4h2

x2 = 4h(H – h) From which we have: x=2 h H h( )

The maximum range xmax occurs when h = (H/2) 2 max 2 2 2 2 4 H H H x = H− =   and xmax = H

*15-53. Water flows through a horizontal pipe at the rate of 60 gal/min (1 ft3 = 7.48 gal). What is the velocity in a narrow section of the pipe that is reduced from 6 to 1 in. in diameter?

3 3 gal 1 ft 1 min 60 0.1337 ft /s min 7.48 gal 60 s R=  =     ; d1 = 6 in. = 0.5 ft 219

(18)

3 1 2 1 0.1337 ft /s (0.25 ft) R v A π = = ; v1 = 0.6809 ft/s 2 2 2 2 1 1 1 2 2 2 1 2 6 in. ; (0.6809 ft/s) 1 in. d v d v d v v d     = = =     ; v2 = 24.5 ft/s

15-54. What must be the gauge pressure in a fire hose if the nozzle is to force water to a height of 20 m?

P = ρgh = (1000 kg/m3)(9.8 m/s2)(30 m); P = 196 kPa

*15-55. Water flows through the pipe shown in Fig. 15-22 at the rate of 30 liters per second. The absolute pressure a pint A is 200 kPa, and the point B is 8 m higher than pint A. The lower section of pipe has a diameter of 16 cm and the upper section narrows to a diameter of 10 cm. (a) Find the velocities of the stream at points A and B. (b) What is the absolute pressure at point B? [ R = 30 L/s = 0.030 m3/s ] AA = π(0.08 m)2 = 0.0201 m3 AB = π(0.05 m)2 = 0.00785 m3 3 3 2 2 2 2 0.030 m /s 0.030 m /s 1.49 m/s; 3.82 m/s 0.0201 m 0.00785 m A A R R v v A A = = = = = =

The rate of flow is the same at each end, but v1 = 1.49 m/s and v2 = 3.82 m/s To find pressure at point B, we consider the height hA = 0 for reference purposes:

PA + ρghA +½ρvA2 = PB + ρghB + ½ρvB2 ; PB = PA + ½ρvA2 - ρghB - ½ρvB2 PB = 200,000 Pa + ½(1000 kg/m3)(1.49 m/s)2 – (1000 kg/m3)(9.8 m/s2)(8 m) - ½(1000 kg/m3)(3.82 m/s)2 PB = 200,000 Pa + 1113 Pa –78,400 Pa – 7296 Pa; PB = 115 kPa 220 0 8 m B A

(19)

Critical Thinking Questions

15-56. A living room floor has floor dimensions of 4.50 m and 3.20 m and a height of 2.40 m. The density of air is 1.29 kg/m3. What does the air in the room weight? What force does the atmosphere exert on the floor of the room? V = (4.50 m)(3.20 m)(2.40 m);

V = 34.56 m3; Afloor = (4.5 m)(3.2 m) = 14.4 m2; m; V ρ = W = mg 3 3 (1.29 kg/m )(34.56 m ) = 44.6 kg mV = ; W = (44.6 kg)(9.8 m/s2); W = 437 N F = PA = (101,300 Pa)(14.4 m2); F = 1,460,000 N

15-57. A tin coffee can floating in water (1.00 g/cm3) has an internal volume of 180 cm3 and a mass of 112 g. How many grams of metal can be added to the can without causing it to sink in the water. [ The buoyant force balances total weight. ]

FB = ρgV = mcg + mmg ; mm = ρV - mc;

The volume of the can and the volume of displaced water are the same. mm = (1 g/cm3)(180 cm3) - 112 g mm = 68.0 g

*15-58. A wooden block floats in water with two-thirds of its volume submerged. The same block floats in oil with nine-tenths of its volume submerged. What is the ratio of the density of the oil to the density of water (the specific gravity)?

The buoyant force is same for oil and water, FB(oil) = FB(water)

ρoilgVoil = ρwgVw ; 2 3 9 10 ; oil w w oil V V ρ ρ = = Specific gravity = 0.741

*15-59. An aircraft wing 25 ft long and 5 ft wide experiences a lifting force of 800 lb. What is the difference in pressure between the upper and lower surfaces of the wing?

(20)

2 1 2 800 lb 6.40 lb/ft (25 ft)(5 ft) P P− = = ; ∆P = 0.0444 lb/in.2

*15-60. Assume that air (ρ = 1.29 kg/m3) flows past the top surface of an aircraft wing at 36 m/s. The air moving past the lower surface of the wing has a velocity of 27 m/s. If the wing has a weight of 2700 N and an area of 3.5 m2, what is the buoyant force on the wing?

Assume h1 = h2 for small wing: P1 +½ρv12 = P2 + ½ρv22

P1 – P2 = ½(1.29 kg/m3)(36 m/s)2 - ½(1.29 kg/m3)(27 m/s)2; ∆P = 365.7 Pa 365.7 Pa; F P A ∆ = = F = (365.7 Pa)(3.50 m2); F = 1280 N

*15-61. Seawater has a weight density of 64 lb/ft3. This water is pumped through a system of pipes (see Fig. 15-23) at the rate of 4 ft3/min. Pipe diameters at the lower and upper ends are 4 and 2 in., respectively. The water is discharged into the atmosphere at the upper end, a distance of 6 ft higher than the lower section. What are the velocities of flow in the upper and lower pipes? What are the pressures in the lower and upper sections?

3 3 ft 1 min 4 0.0667 ft /s min 60 s R= =   dA = 4 in.; dB = 2 in. ( ft)412 2 0.0873 ft ; 2 ( ft)212 2 0.0218 ft2 4 4 A B A =π = A =π = 3 3 2 2 2 2 0.0667 ft /s 0.0667 ft /s 0.764 ft/s; 3.06 ft/s 0.0873 ft 0.0218 ft A A R R v v A A = = = = = =

The rate of flow is the same at each end, but vA = 0.764 ft/s and vB = 3.06 ft/s Pressure at point B is 1 atm = 2116 lb/ft2; Consider h

A = 0 for reference purposes.

D = ρg; 3 3 2 64 lb/ft ; 2.00 slugs/ft 32 ft/s D g ρ = = ρ = PA + ρghA +½ρvA2 = PB + ρghB + ½ρvB2 ; PA = PB + ½ρvB2 + ρghB - ½ρvA2 222 6 ft B A 0

(21)

PA = 2116 lb/ft2 + ½(2 slugs/ft3)(3.06 ft/s)2 + (2 slugs/ft3)(32 ft/s2)(6 ft) - ½(2 slugs/ft3)(0.764 ft/s)2 PA = 2116 lb/ft2 + 9.36 lb/ft2 + 384 lb/ft2 – 0.584 lb/ft2; PA = 2509 lb/ft2 2 2 2 lb 1 ft 2209 ft 144 in. A P =   ; PA = 17.4 lb/in. 2 (absolute) 223

References

Related documents

BỒI DƯỠNG TOÁN - LÍ - HÓA CẤP 2+3 1000B TRẦN HƯNG ĐẠO TP.QUY

Probabilistic fuzzy DL programs as proposed by [25] take a stratied approach to combining probabilistic uncertainty and fuzzy vagueness in a uniform framework. Both fuzzy

address the site-specific environmental impacts of raw material extraction, nor are they meant to assess human health toxicity. EPDs can complement but cannot replace tools

Evaluation of iron oxide nanoparticles effects on tissue and enzymes of thyroid in rats.. Int Res J Biological

When printing Master Labels, the data contained in the PDF417 SHALL consist of Part Number, delimited with spaces (P); total quantity of the pack (Q); Supplier Code (V); Date

This active space is expected to de- scribe the ground and low-lying excited states of Ni(CO)4 and Ni(CO) qualitatively based on previous CASSCF studies of other first row tran-

From model generation, analysis and design to visualization and result verification, STAAD.Pro is the professional’s choice for steel, concrete, timber, aluminum and cold-formed

Special thanks is extended to Gregg Nettesheim, UW Colleges, Office of Academic Affairs, for pre-processing the Fall 2009 enrollment data.... UW Campus Enrollments – Fall 2009 One