• No results found

International Journals

N/A
N/A
Protected

Academic year: 2021

Share "International Journals"

Copied!
5
0
0

Loading.... (view fulltext now)

Full text

(1)

International Journals

1. Chougule, S.S. and Sahu, S.K., 2015, “Heat Transfer and Friction Characteristics of Al2O3/water and CNT/water Nanofluids in Transition flow using Helical Screw Tape Inserts - A Comparative Study,” Chemical Engineering and Processing, 88, pp. 77-88. (Impact Factor: 2.07)

2. Chougule, S.S. and Sahu, S.K., 2014, “Thermal Performance of Nanofluid Charged Heat Pipe With Phase Change Material for Electronics Cooling,” ASME- Journal of Electronics Packaging, 137 (2), p. 021004. (Impact Factor: 0.84)

3. Modak, M., Srinivasan, S., Garg, K., Chougule, S.S., Agarwal, M.K., Sahu, S.K., 2015 “Experimental investigation of heat transfer characteristics of the hot surface using Al2O3/water nanofluids,” Chemical Engineering and Processing, 91, pp. 104-113. (Impact Factor: 2.07)

4. Chougule, S.S., and Sahu, S.K., 2015, “Performance of Wickless Heat Pipe Flat Plate Solar Collectors Having Different Filling Ratios,” ASME - Journal of Solar Energy, 137 (2), p. 024501. (Impact Factor: 1.93)

5. Chougule, S.S. and Sahu, S.K., 2013, “Comparative Study on Heat Transfer Enhancement of Low Volume Concentration of Al2O3/water and Carbon Nanotube/Water Nanofluids in Laminar Regime using Helical Screw Tape Inserts,” ASME- Journal of Nanotechnology in Engineering and Medicine, 4 (4), p. 040904.

6. Chougule, S.S. and Sahu, S.K., 2016, “Comparative Study on Heat Transfer Enhancement of Low Volume Concentration of Al2O3/water and Carbon Nano-tube/Water Nanofluids in Transition Regime using Helical Screw Tape Inserts,” Experimental Heat Transfer, 29, pp. 1-20. (Impact Factor: 0.98)

7. Chougule, S.S., and Sahu, S.K., 2014, “Thermal Performance of Automobile Radiator Using Carbon Nanotube-Water Nanofluid—Experimental Study,” ASME - Journal of Thermal Science and Engineering applications, 6 (4), p. 041009.

(2)

8. Chougule, S. S., Sahu S.K. and Pise A.T., 2014, “Thermal Performance of Two Phase Thermosyphon Flat-Plate Solar Collectors by Using Nanofluid,” ASME - Journal of Solar Energy, 136 (1), p. 014503. (Impact Factor: 1.93)

9. Chougule, S.S. and Sahu S.K., 2014, “Comparative Study of Cooling Performance of Automobile Radiator using Al2O3/water and Carbon Nanotube/Water Nanofluid,” ASME - Journal of Nanotechnology in Engineering and Medicine, vol. 5, pp. 010901.

10. Chougule, S.S. and Sahu, S.K., and Pise A.T. 2013, “Performance Enhancement Of Two Phase Thermosyphon Solar Water Heater By using Surfactant,” Frontiers in Heat Pipe, 4(1), pp. 1-5.

11. Chougule, S.S., Pise, A.T., and Pardeshi, P.S., 2012, “Studies of CNT-Nanofluid in Two Phase System”, International Journal of Global Technology Initiatives, 1 (1), pp. F14-F20.

12. Chougule, S.S., Sahu, S.K., Patrice, E., and Worek, W.M., 2014, “Heat Pipes for Electronic Cooling: Review and Applications with Nanofluids”, Journal of Renewable and Sustainable Energy Reviews (under review).

13. Chougule, S.S., and Sahu, S.K., 2015, “Experimental Study on Laminar Forced Convection of Al2O3/waterr and CNT/Water Nanofluid of Varied Particle Concentration with Helical Twisted Tape Inserts in Pipe Flow,” Heat Transfer Engineering (Under Review).

International Conferences

(outside India)

1. Chougule, S. S., and Sahu, S.K., 2014, “An Integrated Effect of PCM and Nanofluid Charged Heat Pipe for Electronics Cooling,” ASME-12th International Conference on Nanochannels, Microchannels, and Minichannels, Illinois Chicago, USA, August 13-17. 2. Chougule, S.S., and Sahu, S.K., 2013, “Experimental Investigation of Heat Transfer

Augmentation in Automobile Radiator with CNT/Water Nanofluid,” 4th ASME-International Conference on Micro/Nanoscale Heat & Mass Transfer (MNHMT), Hong Kong, China, December 11-14.

(3)

International Conferences (in India)

3. Chougule, S.S., and Sahu, S.K., 2013, “Performance of Wickless Heat Pipe Flat Plate Solar Collectors Having Different Filling Ratios,” 11th ISHMT-ASME and 21st National Heat and Mass Transfer International Conference, IIT Kharagpur, India, December 28-31.

4. Chougule, S.S., and Sahu, S.K., 2013, “Comparison of Augmented Thermal Performance of CNT/Water and Al2O3/Water Nanofluids In Transition Flow Through A Straight Circular Duct Fitted With Helical Screw Tape Inserts,” 11th ISHMT-ASME and 21st National Heat and Mass Transfer International Conference, IIT Kharagpur, India, December 28-31. 5. Chougule, S.S., and Sahu, S.K., 2013, “Comparative Study of Cooling Performance of

Automobile Radiator Using Al2O3/Water and CNT/Water Nanofluid,” 11th ISHMT-ASME and 21st National Heat and Mass Transfer International Conference, IIT Kharagpur, India, December 28-31.

6. Chougule, S.S., and Sahu, S.K., 2013, “Augmentation of Convective Heat Transfer by Addition of High-Alcohol Surfactant (HAS),” 11th ISHMT-ASME and 21st National Heat and Mass Transfer International Conference, IIT Kharagpur, India, December 28-31. 7. Chougule, S.S., Sahu S.K., and Pise, A.T., 2013, “Performance Enhancement of Two

Phase Thermosyphon Solar Water Heater by using Surfactant,” 17th International Heat Pipe Conference (IHPC), IIT Kanpur, India, October 13-17.

8. Chougule, S.S., and Sahu, S.K, 2013, “Model of Heat Conduction in hybrid nanofluid,” International conference on emerging trends in computing, communication and nanotechnology (ICE-CCN), India, March 25-26.

9. Shewale, S.P., Chougule, S.S., Sahu, S.K., and Pise, A.T., 2014, “A Review of Heat Pipe with Nanofluid for Electronic Cooling,” IEEE - 4th International Conference on Advances in Engineering and Technology (ICAET 2014),Nagapattiam, India, May 2-3 .

10. Shewale, S.P., Chougule, S.S., Sahu, S.K., and Pise, A.T., 2014, “A Review on Applications of PCM for Electronic Cooling,” IEEE - 4th International Conference on Advances in Engineering and Technology (ICAET 2014), Nagapattiam, India, May 2-3.

(4)

11. Chougule, S.S., and Pise, A.T., 2011, “Heat Transfer Augmentation in Solar Heat Pipe Collector by Using Nanofluid”, 10th ISHMT-ASME and 21th National Heat and Mass Transfer Conference, IIT Madras, India, December 28-31.

12. Chougule, S.S., and Pise, A.T., 2012, “Studies of CNT-Nanofluid in Two Phase System” 4th International Conference on Global Technology Initiatives (ICGTI), Mumbai, India, March 29-30.

13. Chougule, S.S., Pise, A.T., and Madane, P.A., 2012, “Performance of Nanofluid-Charged Solar Water Heater by Solar Tracking System”, IEEE-International Conference on Advances in Engineering, Science and Management (ICAESM), Nagapattiam, India, March 30-31.

14. Chougule, S.S., Pise, A.T., and Madane, P.A., 2012, “Performance of Biofuels and their Blends as Fuel for C.I. Engines”, IEEE-International Conference on Advances in Engineering, Science and Management (ICAESM), Nagapattiam, India, March 30-31. 15. Chougule, S.S., and Pise, A.T., 2011, “Mathematical Modelling for Computer Simulation

of Different Models of Ammonia Water Absorption Refrigeration System”, International conference on Mathematical Modelling for Industrial Problem (MMIP), NIT Calicut, India, March 28-31.

16. Deshmukh, S.B., Chougule, S.S., Pise, A.T., and Narke, M.M., 2011, “Optimizing the Compression Ratio for C.I. Engine with Jatropha Biodiesel and its Blends”, International Conference on Recent Advances in Mechanical Engineering (INCRAME), Madras, India, April 21-22.

National Conference

17. Deshmukh, S.B, Chougule, S.S., and Pise, A.T., 2010, “Performance analysis of CI Engine Fuelled with Jatropha Biodiesel”, National Conference on Recent Trends in Harnessing of Non-Conventional Energy Resources (RTHNCER), Kolhapur, India, December 15-16.

(5)

Upcoming International Conferences

18. Chougule, S.S., and Sahu, S.K., 2015, “An Experimental Investigation on the Effect of Al2O3 Nanowire/Water Nanofluid Charged Wickless Heat Pipe on the Efficiency of Solar Flat-Plate Collectors” 4th Nano Today Conference, Dubai, December 6-10.

19. Modak, M., Chougule S.S., Sharma, A., and Sahu, S.K., 2015, “Experimental investigation to study the effect of CNT nanofluids on heat transfer characteristics of hot surface,”

23rd National and 1st International ISHMT-ASTFE Heat and Mass Transfer Conference,

Trivandrum, Kerala, India, December 17-20.

20. Modak, M., Sharma, A., Chougule S.S., and Sahu, S.K., 2015, “Heat transfer characteristics of hot surface using different surfactant additives in circular impinging

jets”, 23rd National and 1st International ISHMT-ASTFE Heat and Mass Transfer

Conference, Trivandrum, Kerala, India, December 17-20.

21. Modak, M., Chougule S.S., and Sahu. S.K., 2016, “An Experimental Investigation to study the Heat Transfer Characteristics of Spray Pyrolysed Alumina Coated Surface during Jet Impingement”, 5th ASME-International Conference on Micro/Nanoscale Heat & Mass Transfer (MNHMT), Singapore, January 3 – 6.

References

Related documents

Despite o f some unfavourable results for the valve spool motion and pressure variation in these experiments, the results appear quite optimistic, especially as

A Cooperator Assisted Wireless Body Area Network for Real Time Vital Data Collection Momoda and Hara EURASIP Journal on Wireless Communications and Networking (2015) 2015 238 DOI

H13 workpiece. 4) AISI H13 workpiece material is found to have maximum MRR and D3 workpiece has shown minimum TWR. 5) Graphite powder has reported better MRR compared to the two

The samples were analysed at 233nm by using a UV spectrophotometer( Elico).The dissolution data obtained were plotted as cumulative percentage drug release versus time as zero

In those sections of the country where physicians, hospitals, and other health resources are deficient, and where per capita income is low, the quantity and quality of health

Noteworthy, the effects of soluble fibers and MUFA in- take were not modified after addition of variables change in weight or in waist circumference in the models, support- ing that

In the light of the existing studies, the main goals of this study were as follows: ( i ) to identify the isokinetic knee extensor and flexor muscles strength profiles ( ii )

To overcome this, we have developed the mechanism to change the pitch angle of airfoil blade for this turbine at the best lift of airfoil blade to improve the power