General Catalog
Volume VII
Retractable banner stands
Page 4
Tension banner stand
Page 9
Multi-Purpose display stand
Page 10
LITE
Tension banner stand
Page 11
Popup backwalls / towers
Page 12
Desks / Counters
Page 16
Stretch fabric display
Page 17
Portable literature rack
Page 17
Suspension banner rails
Page 18
Alu snap frames
Page 19
Exhibit systems
Page 20
Frame & Display system
Page 24
Backlit displays
Page 31
EXHIB IT
Exhibition & Display system
Page 37
Black Line Exhibition kits
– Page 36
BannerUp Cabrio
Page 7
New
New
BannerUp Plus
Page 4
Flexiframe Classic 6
– Page 28
The
marketplace
favorite
Special
promotion
New
You have probably seen the size indicators on the hangers
in clothing shops. This is the original Mark Bric product,
manufactured in millions and used all over the world.
Our system for size marking radically changed and
simplified the world-wide handling of clothes, both
for shop assistants and customers.
In 1985 Mark Bric introduced a new line of
products called Flexiframe
®. This light weight,
inexpensive, and extremely versatile frame and display
system has a wide variety of applications, which
significantly impacts markets related to the sign, retail,
and exhibition industries all over the world.
BannerUp
®, a retractable cassette for quick
presentations, with a unique easy banner change, was
developed in 1999. A complete pop-up system, SnapUp
®,
for seamless large scale images was introduced in 2002.
New products are frequently added to the program.
Some of the latest developments are two tension banner
stands, MultiMaster and Impression, as well as SwingUp,
our portable literature rack. In 2008 EGO Exhibit, our
revolutionary new concept for displays and exhibition
building, was introduced. Mark Bric products are today
sold in over 70 countries worldwide, through an
extensive network of agents/
distributors. The worldwide
design, production and
marketing of Mark Bric
display and
exhibition products
are today handled by Mark Bric
Display AB, Böras, Sweden, a company
within the Mark Bric group. Sales and
Marketing in North and Central America are
handled by Mark Bric Display Corporation,
located near Richmond, Virginia, USA.
www.markbricdisplay.com
What do you know
about Mark Bric?
D
is
p
la
y a
nd
E
xh
ib
itio
n
S
ys
te
m
s
BannerUp Plus 3 ft. is the
marketplace
favorite
RETRACTABLE BANNER STANDS
An excellent tool
for public presentations!
BannerUp
®is an ideal product at
exhibitions, events, conferences and
sales promotion campaigns, as well as
being a perfect “companion” for sales
people on the road. The graphic banner
is well protected in a metal cassette
and is simply pulled out. In less than
one minute your presentation is ready.
Guaranteed for 10 years
Heavy-duty cassette with excellent
stability
Roller mechanism is extremely rugged
and built to last
Accepts all types of graphics panels up
to 0.45 mm (0.018”) thickness
Patented quick change system for the
graphics
Easy tension adjustment of graphics
Can be connected side-by-side for
larger exposures
Over 100,000 units sold and proven
around the world
For function, quality, endurance and
design, you will never find a better value
than Mark Bric BannerUp.
Five different models:
BannerUp Original
BannerUp Plus
BannerUp Plus Double
BannerUp Big Plus
BannerUp Cabrio
BannerUp Plus
™
Thousands of satisfied users around the world consider this to be the premier,
top-quality retractable banner stand (rollup) on the market. Equipped with a
unique and patented banner change system, enabling you to replace graphics
in no time. Choose from two colors, different sizes, single or double sided units
and an outstanding selection of accessories.
BannerUp Plus is produced
in high finish aluminum and
equipped with hideaway
swivel-feet for increased
stability if needed. The visible
front rim of the cassette is only 1.6” high,
focusing full attention on the banner.
BannerUp ORIGINAL was developed by Mark Bric in 1999, the first retractable banner stand
with our patented Quick-Change banner feature. Most customers now prefer the lighter weight,
elegant looks, and included soft carry case of the Plus models, but the Original is still frequently
chosen as a lower priced entry point. Now available in 3 ft. width only.
BannerUp Original
™
New
3 ft. unit now available in matte
black powder coat finish!
*All weights are including bag/case.
Item No. Width Color Height Weight* Case/Bag 81114 2 ft.Plus Silver 83” 9.9 lbs Carrying bag 81115 3 ft. Plus Silver 83” 13.2 lbs Carrying bag 81120 3 ft. Plus Silver 83” 17.6 lbs Hard Case on wheels 81116 1 meter Plus Silver 83” 14.3 lbs Carrying bag 81117 4 ft. Plus Silver 83” 19.8 lbs Carrying bag 81118 5 ft. Plus Silver 83” 22.0 lbs Carrying bag 81126 3 ft. Plus Black 83” 13.2 lbs Carrying bag 81121 3 ft. Plus Black 83” 17.6 lbs Hard Case on wheels 81010 3 ft. Original Anthracite 81.5” 16.6 lbs Corrugated carry-box
Easy banner change
This invention by Mark Bric enables you to repeatedly use different banners in
the same cassette. Just slide the old banner out of the cassette and replace
it with a new one.
EUR patent no. 1285421. U.S. patent no. 7,040,372. China patent no. ZL00819992.2
BannerUp
Hard Case on wheels
– Flight case
An extremely strong injection molded case for the 3 ft. units (Plus and Original
model). Equipped with top-quality metal latches. Designed to be pulled along
on built-in wheels, carried in hand with the comfort grip handle or over the
shoulder with the accessory shoulder strap.
Hard case Item no. 5041 Shoulder strap Item no. 5042 Lashing strap Item no. 5043
Send it by truck or check it in at the airport
– no problems!
BannerUp Mini
– the perfect demo tool
Our table top unit with the same unique BannerUp
features as the full-size models.
Carrying bag included.
Item No. Width Height Weight* 81130 10” 18” 5 lbs*Weight is including bag.
Cases & Bags
Carrying Bag
Our carefully designed carrying bag with extra thick padding gives shock-proof
protection against damage during transport. A convenient shoulder strap
is also attached.
Width 60 88 100 120 150
Item no. 5029 5020 5021 5022 5023
The “Double Plus” is extremely
stable and is available in the
standard size of 3 ft. x 83”.
Add extension poles for greater
heights. Wheeled carrying case
included for ease of transport.
BannerUp 3 Ft. Case
Two 3 ft. BannerUp
cassettes, in soft
carry cases, fit
nicely inside this
convenient 2-pack
case, with built-in
wheels and handles.
Case is also useful
for the transport of
BannerUp Cabrio and
BannerUp Double.
15x7x40”
BannerUp Double Plus
™
BannerUp
Item No. Width Height Weight* 81125 3 ft. 83” 31 lbs
*Weight is including bag.
BannerUp Big Plus
™
Nearly 50 square feet of graphic area for maximum attention
The “Big Plus” units are equipped with extra-long metal support feet for best possible stability.
The Mark Bric “Big Plus” is available in widths of 4 and 5 ft.,
with a total height of an impressive 118”. These larger sizes
offer completely new and improved possibilities to display your
graphic images to maximum effect.
Item No. Width Height Weight 81137 4 ft. 118” 20.9 lbs 81138 5 ft. 118” 23.1 lbs
*Weight is including bag.
Item No. Description 5084 3 ft BannerUp Case
Item No. Description 5082 4 ft BannerUp Case 5083 5 ft BannerUp Case
BannerUp 4 Ft. Case
This tough, high impact
polyethylene case makes a
great way to ship multiple
BannerUp cassettes. The Luxus
case has built-in wheels and
handles, and holds up to four
4 ft. BannerUp units, each in
its own soft case. 12x15x53”
BannerUp 5 Ft. Case
Two 5 ft. BannerUp cassettes create a
full 10 ft. backwall – carry them or ship
them together in this convenient new
2-pack case with built-in wheels and
handles. 13x8½x63”
BannerUp
Two options for total identity
BannerUp Cabrio
™
First roll-up with full possibility to customize
Completely customize your next banner display with
BannerUp Cabrio, a unique new invention from Mark Bric Display.
Cabrio is the first retractable banner stand with interchangeable
logo plates. Quickly and easily change the style and color of your
casette to exactly match your banner graphics, or enhance your
brand identity with custom-printed plates.
The standard Cabrio model is fitted with a
fabric-friendly top snap rail.
Cabrio comes in a padded carrying bag.
Features
Add spotlights for increased visibility.
New
Base model
Use the cassette as is, without the addition of
logo plates, for a top-quality, economical stand with a
high-tech look. One set of plain aluminum plates included
free with each Cabrio.
Item no. 81150
Add any of our standard logo plates to give the Cabrio
a mainstream, classic appearance.
Start with our standard logo plates and fully customize
the Cabrio for your application. Add decals or full vinyl
wrap to the plates for a totally unique Cabrio effect.
Changing the graphics
A patented quick change system for the graphic banners.
Changing the logo plates
Interchangable plates. Choose different colors, add your
logo etc.
Customized model
Classic model
Anodized aluminum, item no. 81160 (included)
Black, item no. 81161
Red perforated, item no. 81163 White, item no. 81162
Design Patents Pending
USA - 29346914
EU - 001136386
BannerUp Plus & Original
The standard kit contains one pair of rails (top and bottom) including
top-quality 3M mounting tape and security push pins (black and white
color). A Snaplock top rail is also available, eliminating the need for
top-rail replacements.
Cabrio
Plus
Visible banner height can be increased with the use of extension
poles (see page 6)
Bleed Area: 1.5” Extra banner material
(unprinted): 12”
C
A
B
Focus attention on your
BannerUp graphics with
a halogen spotlight.
Two styles now available.
Extension poles allow you to increase
the banner height up to a maximum
of 118”. 4 and 5 ft. models require
two pole sets, all others use one set.
Halogen Spotlights
Extension pole
“Quick-Change” mounting kit
Width Mini 2 ft. 3 ft. 3 ft. black 1 meter 4 ft. 5 ft. Tape Rail Item no. 81019 81022 81020 81026 81030 81040 81050 Snaplock Rail Item no. n/a 85074 85070 n/a 85071 85072 85073 Bottom Rail only Item no. n/a 89179 89183 n/a 89259 89304 89354
Graphic banner production
Cassette Banner Visible Display Total bannersize Width (A) Banner (B) Height length (C)
Mini
5.5” x 4.3” x 10.2”
9.87”
16”
18”
29.5”
2 ft.*
5.5” x 4.3” x 24”
23.63”
81”
83”
94.5”
3 ft.
5.5” x 4.3” x 35”
34.63”
81”
83”
94.5”
3 ft. Double
5.5” x 4.3” x 35”
34.63”
81”
83”
94.5”
1 meter
5.5” x 4.3” x 39.7”
39.37”
81”
83”
94.5”
4 ft.
5.5” x 4.3” x 47.6”
47.25”
81”
83”
94.5”
BigPlus 4 ft.
5.5” x 4.3” x 47.6”
47.25”
116”
118”
129.5”
5 ft.
5.5” x 4.3” x 59.5”
59”
81”
83”
94.5”
BigPlus 5 ft.
5.5” x 4.3” x 59.5”
59”
116”
118”
129.5”
* 2 ft. model has intermediate heights different from the rest of the line.Please ask us for details if you plan to use the 2 ft. stand at other than full standard height.
The banner material can be vinyl, fabric, double-sided laminated paper etc. Recommended maximum thickness of
BannerUp is ideal to connect
side-by-side to achieve a full-size
backwall. Thanks to the unique
design of BannerUp, the gap
between the separate banners is kept
at a minimum.
A simple plastic connector (+ one
spare) is included, free of charge,
with the delivery of all BannerUp units.
A stronger and more secure metal
connector can be purchased as an
accessory.
135º 180º
Item no. Article
89011 Metal connector 180º 89012 Metal connector 135º
Connected units
Accessories
BannerUp
8
BannerUp Cabrio
The top rail has a reusable snap function and never needs replacing,
cutting in half the price of the Quick-Change kit. The bottom rail is our
standard 3M mounting tape style and may be purchased separately
for additional banners.
Top snap rail Aluminum, 3 ft. - Item no. 81027 Top snap rail black, 3 ft. - Item no. 81028 Bottom tape rail, 3 ft. - Item no. 89183
Please observe: One Quick-Change mounting kit is included with each Banner-Up cassette unit, enabling the first banner to be installed.
Description Item no. 26” (Standard) 89260
7.5” 89255
15” 89256
35” 89257
Custom 89265 Standard 3 piece set 89172 4’ Big Plus 89263 5’ Big Plus 89264
Cassette Banner Visible Display Total banner size Width (A) Banner (B) Height length (C)
3 ft.
4.3” x 3.9” x 35”
34.63”
79”
81”
92.5”
Low Voltage 50W, with a 120VAC transformer.
Item no. 80015
Line Voltage 120VAC/50W, with spare bulb
Item no. 81005
The easy banner change
is a unique feature on the
BannerUp models and
Quick-Change rail kits are
available for mounting on
your replacement banners.
Just pull
and be seen!
Original
Cassette Banner Visible Display Total banner size Width (A) Banner (B) Height length (C)Impression
3
with snap-lock rails
Impression
1
with mounting tape rails
Impression
1uses the well-tested BannerUp Aluminum top rails with extra strong top-quality
3M mounting tape, as well as security push pins to hold the graphic securely in place.
One pair of rails is included with each delivery of the Impression stand.
Extra rails kits
can be purchased for your replacement banners.
Impression
3uses our aluminum banner rail (snap-lock) profile. Quick and economical – no
need to exchange rails when you exchange graphic banner/message. Just snap-off and
snap-on!! 100% secure locking, grips up to 0.016” thickness of material.
Please observe: One quick-change banner kit is included with each Impression1 stand cassette unit,
enabling the first banner to be mounted.
3 ft. standard width
Ability to mount a spotlight
Solid stainless base for maximum stability
Full flexibility in graphic width
Easy and economical change of graphics
Low weight base for maximum portability
TENSION BANNER STAND
Focusing on design and
quick set-up
A most elegant stand to further
strengthen the impact of your
promo-tion. Two models (Impression 1 and 3)
to choose from.
Few components make assembly
extremely fast and easy
Perfect stretch of your graphic banner
Top class material is used in all details
Minimalist design focuses full attention on
the graphic banner
Both Impression 1 and Impression 3 are delivered
in elegant and practical carry bags, with space for
the graphic banner as well.
- The Impression 1 bag takes rails of maximum
3 ft. width.
- The Impression 3 bag takes rails of maximum
40” width – for wider graphics purchase our
graphic bag, item 5035, (see page 16).
Both models are equipped with solid feet in
stain-less steel and a strong 3-section fiber glass pole
joined by an elastic cord.
TECHNICAL FACTS
Impression
1Impression
3 Item no: 86200 Item no: 86400Weight: 7.5 lbs (incl. bag) Weight: 7 lbs (incl. bag)
Depth: 14” Depth: 14”
Widths: 34.63” Widths: 34.63 standard
Height: 82.5” Height: 82.5”
The Multi-connectors on the basic stands hold graphic banners,
frames and plain boards.
Choose between
two colors
of the stand: Anodized silver grey
color or a scratch-resistant matte black finish.
3 different ways
to use the
MultiMaster
with plain panel
with Flexiframe
with Banner
The stand comes conveniently packed in a carrying bag with
space for the graphic banner as well. The bag gives shock
proof-protection with an inner cardboard tube and the stand
is packed in an inner nylon cover as well, not to come in direct
contact with the graphic panel.
MULTI-PURPOSE DISPLAy STAND
One stand – mastering
multiple challenges!
This multi-purpose stand masters
perfectly graphic banners and rigid
panels, as well as signs and posters
framed with Flexiframe.
The MultiMaster impresses with a
super height, thanks to our telescopic
pole (adjustable up to 10 feet !) and an
outstanding stability.
Features Snap-lock BannerRail to secure the
graphics
Telescopic pole for maximum flexibility
Single and double-sided functionality
Excellent stability with a tripod base
Message can be lifted from the floor to a
perfect visibility
Flexibility in graphic width
No grommets or pole pockets required
Banners up to 10 ft. tall x 46” wide
Banner Rail – Aluminum
Banners are attached using our snap-lock
alumi-num BannerRails, giving maximum flexibility in size
and a totally secured graphic. Read more about
BannerRails on page 18.
Snap-lock function
TECHNICAL FACTS Item no: 86100
Color: Anodized silver grey or scratch resistant matte black finish.
Weight: 7.5 lbs. (including bag).
Depth: 26”
Widths: Any size up to 46” wide
Height: Adjustable up to 10 ft.
Item No. Model/Width 86150 18” 86151 20” 86152 22” 86153 24” 86154 36” 86155 40” 86156 46” 86100 Stand only
Mounting rails
Aluminum profile, 5 ft. – Item no. 86043 Quick-change strip, 5 ft. – Item no. 86044
Do-it-yourself by purchasing profile lengths, quick-change strips and complete sets of components, to cut and make custom sizes to order.
Pole Sets
All components, excluding aluminum profiles/ quick-change strip, packed in a nylon carrying bag.
Single sided – Item no. 86040 Double sided – Item no. 86041 Aluminum profile
Quick-change strip
Top & Bottom
All units come conveniently packed in a nylon
carrying bag. BannerUp Lite comes as standard
in 34-5/8” width, but other sizes can be delivered
on request.
TENSION BANNER STAND
Full of display advantages
Our first non-retracting banner stand,
the BannerUp Lite is still a favorite among
many of our customers – extremely
light weight, low-cost, user-friendly and
versatile. From point-of-purchase
applications to exhibition use, the addition
of the BannerUp Lite often assures a
perfect Mark Bric solution for all your banner
display needs.
Single and double-sided functionality
Excellent stability
Light weight
Telescopic pole for full flexibility
TECHNICAL FACTS
Single sided Double sided
Item no: 86010 86020
Color: Anodized Aluminum
Weight: 4 lbs. 4 lbs.
Depth: 13” 15.35”
Width of banner: 1.5 - 5 ft. 1.5 - 5 ft
Height of stand: 5 - 7 ft. 5.5 - 7.5 ft.
Single sided
Double sided
Profiles & Components for custom sizes
180º
150º
Connecting Side-By-Side
Protective carrying bag
An elegant and protective carrying
bag for your BannerUp Lite and
graphic.
Each bag will hold two single
sided stands.
Item no. 5050 – up to 46” width Item no. 5051 – up to 60” width
Extra Quick-Change
mounting kit, 3 ft.
The stands have our Quick-Change
banner mounting system. Just attach
the two self adhesive plastic strips to
the back of the graphic (top and
bot-tom) and slide into the aluminum rails.
Item no. 86055
Accessories
Connector brackets, 180º – Item no. 86053 Connector brackets, 150º – Item no. 86054
A variety of models and styles to fit your needs
POPUP BACkWALLS / TOWERS
The most elegant way of
presenting large-format
graphics
Mark Bric produces two professional
SnapUp models with unparalleled
dura-bility and quality of workmanship. Both
systems are compact, portable and
ex-tremely user-friendly. Curved, straight
or cylindrical shapes are available to fit
all types of display requirements. The
SnapUp products allow for fast
presenta-tion of seamless large scale images. Text
and graphics are totally uninterrupted and
will attract full attention.
MP1
MP1 is our top-of-the-line SnapUp model. Its cross-braced construction gives maximum strength and rigidity to the system, and most important, the graphic panels will always hang perfectly. MP1 is available in the classic curved pop-up format, as well as in straight format.
MP2
This is our most versatile SnapUp model and at the same time, economically priced. Absence of the cross-bracing makes it a traditional pop-up system and allows deep display shelving. MP2 is available in a curved, straight or cylindrical (tower) shape.
Super height Nearly 10’
10’ Tower
26” (d) x 116” (h)
Item no. 7865
Our table top unit
with the same
unique SnapUp
features as the
full-size models.
Carrying bag
included.
42” (w) x 25” (h) x 14” (d) Item no. 9816All SnapUp backwalls and towers include,
at no surcharge, protective covers for the structure and the
mag-bars.
(Mini has a separate pocket for the mag-bars
in the carrying bag.)
ALWAyS
INCLUDED
MP1 Straight
(incl. stabilizing feet)
MP1 Curved
MP2 Straight
102” (w) x 89” (h) x 8” (d)
MP2 Curved
MP2 Tower
– Basic structures
7’ Tower
26” (d) x 88” (h)
Item no. 7864
MP2 Mini
– the perfect demo tool
Kit Descriptions
SnapUp
8Z\x
’ Straight
(3x3)Standard kit 7852 Show kit 7853 Show kit Plus 7854
6
’ Straight
(2x3)Standard kit 7855 Show kit 7856 Show kit Plus 7857
71” (w) x 89” (h) x 8” (d)
10
’ Curved
(4x3)Standard kit 7860 Show kit 7805 Show kit Plus 7865
8
’ Curved
(3x3)Standard kit 7861 Show kit 7806 Show kit Plus 7866
6
’ Curved
(2x3)Standard kit 7862 Show kit 7850 Show kit Plus 7867
91” (w) x 89” (h) x 24” (d) 67” (w) x 89” (h) x 16” (d) 113” (w) x 89” (h) x 33” (d)
8Z\x
’ Straight
(3x3)Standard kit 7879 Show kit 7880 Show kit Plus 7881
6
’ Straight
(2x3)Standard kit 7885 Show kit 7886 Show kit Plus 7887
6
’ Tabletop
(2x2)Standard kit 7894 Show kit 7895 Show kit Plus 7896
71” (w) x 88” (h) x 13” (d) 71” (w) x 60” (h) x 13” (d) 101” (w) x 88” (h) x 13” (d)
10
’ Curved
(4x3)Standard kit 7870 Show kit 7871 Show kit Plus 7872
8
’ Curved
(3x3)Standard kit 7876 Show kit 7877 Show kit Plus 7878
6
’ Curved
(2x3)Standard kit 7882 Show kit 7883 Show kit Plus 7884
6
’ Tabletop
(2x2)Standard kit 7891 Show kit 7892 Show kit Plus 7893
8
’ Tabletop
(3x2)Standard kit 7888 Show kit 7889 Show kit Plus 7890
116” (w) x 88” (h) x 38” (d) 92” (w) x 88” (h) x 28” (d) 72” (w) x 88” (h) x 21” (d) 92” (w) x 60” (h) x 28” (d) 70” (w) x 60” (h) x 21” (d)
Standard Kits
Include: frame, mag-bars
and mounting hardware
for graphic panels
Show Kits
Include: frame, mag-bars,
hard case, halogen lighting
and mounting hardware
for graphic panels
Show Kits Plus
Include: frame, mag-bars,
hard case plus
conversion
kit
, halogen lighting and
Frontrunner
®fabric panels
Note: For Tabletop Kits, spotlights are sold separately.
Please observe!
All systems include mag-bars for single sided use. For double-sided exposure
LED spotlight, 240 lumen
with easy fit connector to the system. 120VAC, incl. transformer. A well-padded carrying case for two spotlights is an available accessory. Extra low weight of only 10 oz. Grey color.Item no. 80021
Each SnapUp Show Kit or Show Kit Plus includes one of these
hard-shell molded cases to safely store and transport your valuable display kit,
complete with graphics. Each case is equipped with durable heavy-duty
wheels for ease of movement. Cases can also be purchased separately.
Multi-Compartment Case
The case has three well-protected
compartments: One for the structure,
one for the graphic panels and one (the
lid) for two spotlights. The lid may also
be used as a step when assembling
the spotlights on the system. Includes
composite counter top (black/ beech).
29x17x 36”h.
This heavy-duty case is standard with all
tabletop models. Two of these cases
provide an alternative means of
trans-porting floor model SnapUps. Ask
cus-tomer service for details. 14x14x37”h.
Sturdy, hard-shell case with heavy-duty
wheels provides a safe, effective way
to store and transport your complete
SnapUp kit. Case converts easily to a
counter with the optional wrap-around
fabric or graphics and a decorative
drop-in countertop lid. 26x16½x35”h.
Oval Case
Tabletop Case
The case has room for: 1/ Structure incl. mag-bars 2/ Graphic/fabric panels 3/ Two spotlights
The case has room for: 1/ Structure incl. mag-bars 2/ Graphic/fabric panels The case has room for:
1/ Structure incl. mag-bars 2/ Graphic/fabric panels 3/ Two spotlights
Transport Cases/Counters
5046
Both bags with shoulder strap
Soft padded bags with shoulder strap for transportation of structure and graphic panels.
Padded carrying bag
for the graphic panelsItem no. 5046
Padded carrying bag
for the structureItem no. 5045
Carrying Bags
Spotlights
SnapUp
New
Both the Oval and the
Multi-Compartment case can easily be
converted to attractive counters
with wrap-around fabric or graphic
panels.
The CaseSaver is a tough
vinyl backed nylon case
cover designed to protect
latches and lid/counter
edges during shipping and
is included free with the
Multi-Compartment case.
Oval Case 82009 Oval lid + 82070 fabric wrap Multi-Case 5040 Fabric Wrap 9035 Case Saver 9038 Square Case 82008“Wall washer” light fixture with easy fit connector that works on all MP systems. 200 watt, 120 VAC
Item no. 80006
Halogen spotlight
Enclosed lamp meets the tightest known convention center regulations. Easy fit connector that works on all MP systems. 75 watt, 120 VAC.
Item no. 80008
PAR 30 spotlight
Holds and protects two Wall Washer (80006) or BannerUp (81005) light fixtures.
Item no. 5065
Padded light bag
Wooden shelf for MP2
Including carrying bagStraight 5229 Curved inner 5227 Curved outer 5228
The size of each graphic panel for the different SnapUp models is as follows:
C
B
A
10 ft
4 center2 end Backwall style Panels requiredGraphic panel production
Attachment of Graphic Panels
1 roll = 98 ft. Magnetic tape needed for each structure: 4x3 - 88 ft., 3x3 - 75 ft., 2x3 - 60 ft., 1x3 - 46 ft. Z\x” for backwalls 82281
1” for counters/desks 82282
Magnetic tape for the graphic panels
Alternative 2: Hang tabs
Using these new hang tabs on your MP graphic panels will make the hangers and kickers disappear. Apply these self-adhesive hang tabs to the top rear corners of each panel and cut notches to match.
4x3 6 pairs 3x3 5 pairs 2x3 4 pairs 1x3 3 pairs Fits both MP1 and MP2 models. Item no. 82398
Alternative 1: Kickers & Hangers
Full width “kickers & hangers” with extra strong adhesive tape. Attached both at the top (“Hanger”) and at the bottom (“Kicker”) of each graphic panel. No cut out in the graphic panel itself is necessary.
Inner Shelving for MP2 systems
Our new MP2 magnetic bar with
magnet strips on three sides. Use
this mag-bar for attaching the inner
side graphics for interior shelving, as
well as making sharp corners on the
SnapUp wall systems.
Item no. 82930
Three sided mag-bar
Interior Shelving and Sharp Corner Endcaps
SnapUp
All SnapUp structures can be used also double sided (= graphic panels on both sides of the system). Extra mag-bars and “kickers & hangers” for the reverse side must be added.
Double sided option
Complete kits of mag-bars and “kickers & hangers”
Alternative 3: Hang clips
Another economical solution. Small end pieces with extra strong adhesive tape are attached to the top corners of each graphic panel + the top hubs of the system are exchanged.
No cut out in the graphic panel is necessary. Graphics are totally unobstructed – no part of the system is visible.
Hang clips kit - Item no. 82280 Extra panel clips - Item no. 82278
Every MP kit comes with a complete set of the hangers, kickers,and
mag-bars needed to install your graphics. Replacement parts may be
purchased as follows:
New
4x3 6 kits
3x3 5 kits
2x3 4 kits
1x3 3 kits
Following numbers are needed for each system:
15
82380 82383 82381 82341 MP1 Straight 82384 82383 82384 82341 MP2 Curved 82390 82383 82391 82371 MP2 Straight 82392 82383 82392 82373 MP2 Tower 82394 82371 MP1 Curved 4x3 3x3 2x3 82512 82514 82515 MP1 Straight 3x3 2x3 8250382502 MP2 Curved 4x3 3x3 2x3 82522 82524 82525 MP2 Straight 3x3 2x3 8250882507 MP1 Mini 3x2 82540 MP1 Curved Backwall 27>\zn 19 ZZ\zn 31 B\zn 85 B\, 88C\v MP1 Straight Backwall 29Z\, 19 ZZ\zn 29 Z\, 85 B\, 88C\v MP2 Curved Backwall 26Z\x 19 ZZ\zn 31 Z\x 84 Z\x 87Z\x MP2 Curved Tabletop 26Z\x 19 ZZ\zn 31 Z\x 56 59 MP2 Straight Backwall 28 B\, 19 ZZ\zn 28 B\, 84 Z\x 87Z\x MP2 Straight Tabletop 28B\, 19 ZZ\zn 28 B\, 56 59 MP 2 Mini 9 ZC\zn 15 C\v 21 M\, 23M\, MP2 Tower 27 Z\v 84 M\zn 87B\,MP2 Tower - Extra Tall 27 Z\v 113 C\zn 116 C\,
Oval Case 68 31 C\v
Structure Front End Rear*
Graphic PanelHeight (B)Total Panel Height (C) Graphic Panel Width (A)
There are many materials and a variety
of techniques for producing the graphic
panels including 3-ply construction
(laminate + print media + opaque
backing) and 2-ply construction
(laminate and printable opaque media).
Regardless of the technique used, total
thickness ranges are recommended at:
Center panels:
.020” to .030”
End panels:
.015” to .020”
* Rear panels used only
8 ft
3 center2 end6 ft
2 center2 endMini
3 center2 endTower
3 center Center End Rear Mag-bars MP1 Curved Center End Rear Mag-bars Center End Rear Mag-bars Center End Rear Mag-bars All Mag-barsDesks anD counters
Receive your customers
in style
Reception desks and counters are
a most vital part at any trade show,
exhibition, event and product
demonstration. The Mark Bric
counter units offer absolute top
quality and perfect stability to serve
you during many years.
SnapUp® is a registered trademark by Mark Bric Display AB.
technical facts
Mini Counter, black or “nature”. Item no. 82038
Midi Reception Desk, black or “nature”. Item no. 82238.
Please note: Inner shelves are always ”nature” for Midi. Mini has black inner shelves with black top and “nature” shelves with “nature” top.
Magnetic tape, for one graphic panel, is included in all deliveries of the mini-counters/reception desks. To purchase extra tape, for the production of additional graphic panels, see page 15, item 82282.
A B C
MP 2 Mini counter
1 panel 49 1/8” 39 9/16” ––
3 panels 12 15/16” 39 9/16” 18 1/8” MP 2 Midi Reception desk 77 15/16” 34 5/8” ––
Graphic panel production
A
B
B
C
A
C
3 PANELS 1 PANELReception Desk
One carrying bag on wheels
is always included.
Mini Counter
The mini-counter is a smaller unit compared
to our reception desk, but still big enough as
a meeting point or for a demonstration.
A light-weight product to be transported
in our convenient shoulder bag, which is
always included.
Set-up time is less than 5 minutes. Finish off
with your promotional graphic panel and the
unit is complete.
Choose between “nature” or
black table top.
New
Extra graphic bag
for “Mini counter”
when using one
single panel.
Item no. 5035
excellent stability
Polished wooden table tops/shelves
Plenty of inner shelving space
easy and quick set-up
10 year warranty
49”w x 18”d x 35½”h
40 lbs.27”w x 11½”d x 41”h
22 lbs. Item Description82238 MP Desk, Standard Kit (hardware, soft rolling case, mag tape)
7840 MP Desk, Show Kit (hardware, Luxus case, fabric wrap)
9841 Fabric wrap, 1 panel – black, grey or blue
5081 Luxus high-impact molded shipping case
Item Description
82038 Std. kit, (hardware, case, magnetic tape)
9840 Fabric wrap kit, 3 panels – black, grey or blue
5080 Luxus transport case, high impact plastic shipping case
SwingUp comes conveniently packed in a nylon carrying bag. Choose a
bag with or without wheels. The literature rack is available in
matte black
or silver grey.
Header
connectors
A Flexiframe header frame in 8½” x 11” can be assembled on the SwingUp unit. Frames are purchased separately, see page 27.Item no. 83030
Shelf divider
Each shelf on the SwingUp unit can be divided vertically to enable display of more narrow brochures. To divide the shelf in half gives a width of 4”.
Item no. 83032
Hard Case on wheels 38h x 12” dia. Carrying bag with
shoulder strap
The graphic image is printed on a stretch fabric material and
then attached to the system with Velcro tape. In erecting the
system, the fabric is automatically stretched out and a smooth
surface is achieved. The printed fabric remains attached to the
system also during take-down and storage in the protective
carrying bag/hard case. It can’t be easier!
Portable literature rack
Offer your
printed material
in an organized way
Just unpack, pull up and the SwingUp
literature rack is ready. The high-tech
and timeless design, combined with
top-quality and durability guarantees
many years of daily use.
Extremely user-friendly
Extra foot support for outstanding
stability
Secure double-locking set-up
Superb durability and a 5 year warranty
technical facts
Color of stand: Matte black or silver grey.
Weight incl. bag: 20 lbs. / 22 lbs. (bag on wheels)
Size (unfolded): 10” (w) x 22” (d) x 61 (h)
Size (folded): 10” (w) x 10” (d) x 14 (h)
Shelves: 5 pcs. / 8½ x 11” or A4 size
Capacity: 100 sheets per shelf
stretch fabric DisPlay
A display wall
in less than a minute
The SnapUp Stretch offers the quickest
and easiest way to set up and display
a seamless large format graphic print.
Ideal to use at short-term events and
exhibitions when time is a decisive
factor.
technical facts
Item no: Tabletop 2x2 59”w x 59”h 82217 Structure 2x3 59”w x 87 1/2”h 82218 Structure 3x3 87 1/2”w x 87 1/2”h 82219 Structure 4x3 116”w x 87 1/2”h 82220 Soft carrying bag 5046 Hard case 88073
Available in 4 different sizes 2x2, 2x3,
3x3, 4x3
Fast and easy to set up
Printed graphic remains on system
Special
promotion
EU patent no. 1 746918, EU design 000 181 615, U.S. patent no. D533735, CN design ZL 2004 301 10052.1
Rack w/carry case Item no. 83020 Rack w/rolling case Item no. 83025
Unique snap-lock design. 100% secure.
Grips up to 0.016” (16 mil) thickness
Unbroken lengths up to 89.5”
Can be joined for extra length
End caps in different colors
Can be used in combination with our banner
stands MultiMaster, Impression, and
BannerUp
Simple slide-in design.
Grips up to 3/32 (0.093”, 93 mil) thickness
Ideal for thicker banners and boards
Unbroken lengths up to 89.5”
Can be joined for extra length
Use our splicer to join two rails for extra wide banners.
Open & Load Snap Shut Snap Open
Join two rails to suspend extra wide banners. Contact us for more details.
BannerRail opener to facilitate the opening of the profile. Item 85195.
Choose from four colors for the end caps: Light grey, blue,red and black (standard),
susPension banner rails
Smart and easy
presentation
of graphic banners!
Banner rails provide an attractive and
cost effective way to suspend banners
and posters in shop windows, malls,
banks, travel agencies etc. – wherever
you need to professionally display a
suspended graphic. Mark Bric offers
three excellent alternatives for different
needs and requirements.
Aluminum Snap-lock design
attach rails to both top and bottom of
banner/poster for maximum impact/stretch.
for smaller sizes of banners the use of a top
rail only may be sufficient.
rails may be suspended one from the other
if desired.
use with optional accessories: ceiling grid
clips, c-hooks, suction cups and suspension
chains. see page 25.
Aluminum Slide-in design
Set Grommet Load Cap Ends
three different models:
aluminum snap rail
aluminum slide-in rail
Plastic slide-in rail
Profiles and components
Description Item No. Profile 89½” 85100
Grommets 85193
Splicer 85192
End caps 85191
Hanging eyelets 85049
Profiles and components
Description Item No. Profile 89½” 85009
End caps 85048
Hanging Eyelets 85049
Opener 85195
Complete kits
All rail kits contain two rails (top and bottom), end caps and hanging eyelets.
18” 20” 22” 24” 36” 40” 48” Custom cuts 85054 85055 85056 85057 85061 85062 85063 Inquire
TM
Complete kits
All rail kits contain two rails (top and bottom), grommets, end caps and hanging eyelets. 18” 20” 22” 24” 36” 40” 48” Custom cuts 85105 85106 85107 85108 85112 85113 85114 Inquire
Front loading snap frames in a slim and
elegant design. Produced in a high finish
anodized aluminum.
The frame is equipped with a back panel in durable
weatherproof plastic and an anti-reflex (non-glare) front
protection plastic sheet, 0.5 mm (0.020”) thick, to hold the
poster in place. Frames may be mounted portrait
or landscape. Profile width 1”.
1 pc. packing incl. screws and wall anchors.
Simple slide-in design.
Super low-cost solution
Grips up to 1/16” (0.062, 62 mil)
thickness
Unbroken lengths up to 89.5”
Fold & Staple Load Cap Ends
alu snaP frames
The new attractive Mark Bric Snappy
Frames will display your posters and prints
to maximum effect. Elegant aluminum
profiles, with the traditional front loading
snap function, make up the frame.
Changing of posters is completed within
seconds. A durable construction and
top-quality material guarantees long time
use without any problems. Just snap your
posters in place and start selling!
Plastic Slide-in design
Front loading
Changing of posters within seconds
Superb durability and a 5 year warranty
Complete with back panel and front lens
Snap Up
Profiles and components
Description Item No. Profile 89½ 84009
End Caps 84048
Hanging Eyelets 85049
Size Item No. 8½” x 11” 80520
18” x 24” 80521
22” x 28” 80522
24” x 36” 80523
Complete kits
All rail kits contain two rails (top and bottom), end caps and hanging eyelets.
18” 20” 22” 24” 36” 40” 48” Custom cuts 84054 84055 84056 84057 84061 84062 84063 Inquire
exhibit systems
ISOframe - Tool-less
framework concept
ISOframe is a new, aluminum frame
cladding system that can be
assem-bled without tools. Ideal for creating
stunning and innovative exhibition
and retail displays. ISOframe
struc-tures can be assembled quickly,
without tools, and clad in any number
of rigid or flexible substrates.
ISO-frame incorporates FASTclamp – the
world’s first tool-less clamp.
FASTclamp - speeds up
assembly 8 fold
FASTclamp is a simple lever operated clamp
used to connect the framework replacing the
hex key used on older systems. Our tests
show that frameworks assembled using
FASTclamp are up to 8 times faster
to assemble than traditional frameworks.
This means substantial cost and time
benefits for a display builder, as well as
making structures easy to assemble for the
self-build exhibitor.
ISOframe incorporates our new, patented
‘i-Line’ Intelligent Graphic Alignment System.
Graphics are aligned in both the vertical and
horizontal planes automatically using
high-powered neo-magnets. Never again will the
customer struggle to attach graphics.
ISOframe Patents Pending
www.MarkBricDisplay.com
www.ISOframe.com
The world’s first fully flexible
portable display system
A modular system focused
on design and stability
ISOframe
The world’s first fully flexible portable
display system
Easy “no tools” assembly
Flex the entire display for the shape needed
Enlarge or reduce to suit the event
Self-aligning 31.5” wide graphics
Extremely compact during transport
13 x 6.5’ three wall layout
Alternative layouts created using the same graphics
and framework as the 8-section display shown above
Item #ISO-W-1080 (wall only)
13 x 10’ two wall layout
10
year
warranty
19 x 4’ single wall layout
Wave modules
See separate price list for various standard kit options.
Mini 205 cm / 80.1”
Starter kit
IS-W1-SU
Extension kit
IS-W1-EU
Midi
225 cm / 88.6”
Starter kit
IS-W2-SU
Extension kit
IS-W2-EU
U.S. standard sizeMaxi
245 cm / 96.5”
Starter kit
IS-W3-SU
Extension kit
IS-W3-EU
Basic Building Blocks
Start with a “Starter kit”
Add one or more “Extension kits”
Starter kit complete with: 2 posts, 2 feet, 1 Flexi-Wave Link, 2 sets corner trim, 1 set kicker and hanger Extension kit complete with: 1 post, 1 foot, 1 Flexi-Wave Link, 1 set kicker and hanger
Gallery
1 starter kit + 5 extension kits Item # ISO-W-1060
#2
(3 x 15 ft.)1 starter kit + 6 extension kits Item # ISO-W-1070
#4
(5 x 15 ft.)Visit our product-specific website
www.ISOframe.com
for other layouts and designs.
A modular system focused
on design and stability
Easy “no tools” assembly
Enlarge or reduce to suit the event
Three style options to suit the application
Graphic Wing
Flying Oval
Oval
Built-in
desk
LCD holder
10
year
warranty
Self-aligning 31.5” wide graphics
Attach heavy items such as shelves, LCD etc.
Extremely compact during transport
Accessories
The padded wheeled frame case can be connected with the small rigid graphic tube to form one unit.
Visit our product-specific website www.ISOframe.com for other layouts and designs.
Keyboard Table
Depth 8.3” Item no. IS-80-TA03
Semi-circular Table
Depth 19.7” Item no. IS-80-TA02
Square Table
Depth 19.7” Item no. IS-80-TA01
Built-in tables
height 34.65”, width 31.5” (In combination with Compact this unit must be added on a straight extension kit)
Compact Graphic Wing modules
Mini
205 cm / 80.7”
Starter kit
IS-CW-81-C1
Curved extension kit IS-81-EX-22,5-I
Straight extension kit IS-81-EX-800-S
Midi
225 cm / 88.6”
Starter kit
IS-CV-82-C1
Curved extension kit IS-82-EX-22,5-I
Straight extension kit IS-82-EX-800-S
U.S. standard sizeStarter kit complete with: 4 posts, 2 beams 31 1/2” 22.5°, 4 beams 15 3/4” 22.5°, 4 sets corner trim, 1 set kicker and hanger
Curved extension kit complete with: 1 post, 2 curved beams 22.5°, 1 set kicker and hanger
Straight extension kit complete with: 1 post, 2 straight beams,
1 set kicker and hanger
Compact Flying Oval modules
Mini
205 cm / 80.7”
Starter kit
IS-CF-81-C1
Curved extension kit IS-81-EX-22,5-I
Straight extension kit IS-81-EX-800-S
Midi
225 cm / 88.6”
Starter kit
IS-CF-82-C1
Curved extension kit IS-82-EX-22,5-I
Straight extension kit IS-82-EX-800-S
U.S. standard sizeStarter kit complete with:
2 oval posts, 2 feet, 4 flying beams, 2 posts, 2 beams 22.5°, 2 sets corner trim, 1 set kicker and hanger
Curved extension kit complete with: 1 post, 2 curved beams 22.5°, 1 set kicker and hanger
Straight extension kit complete with: 1 post, 2 straight beams,
1 set kicker and hanger
Compact Oval modules
Mini
205 cm / 80.7”
Starter kit
IS-CO-81-C1
Curved extension kit IS-81-EX-22,5-I
Straight extension kit IS-81-EX-800-S
Midi
225 cm / 88.6”
Starter kit
IS-CO-82-C1
Curved extension kit IS-82-EX-22,5-I
Straight extension kit IS-82-EX-800-S
U.S. standard sizeStarter kit complete with:
2 oval posts, 2 feet, 2 curved beams 22.5°, 1 set kicker and hanger
Curved extension kit complete with: 1 post, 2 curved beams 22.5°, 1 set kicker and hanger
Straight extension kit complete with: 1 post, 2 straight beams,
1 set kicker and hanger
Basic Building Blocks
As shown – 3 section kit (1 starter + 2 curved extensions)
Item #ISO-CW-1030
As shown – 3 section kit (1 starter + 2 curved extensions)
Item #ISO-CF-1030
As shown – 3 section kit (1 starter + 2 curved extensions)
Item #ISO-CO-1030
*See separate price list for various standard kit options.
ISOframe
Brochure holder
post mounted A-4, 8.5” x 11” Item IS-80-LH01
(Only for Compact Oval and Flying Oval)
Post Mount table
11.8” x 5.9” x 33.5” Item IS-CO-ST
(Only for Compact Oval and Flying Oval on
each Oval post.)
Post mount table
Brochure holder
You can mount 1, 2 , 3 or more on each oval
LCD Mount for Screens up to 24”
Item IS-80-TM02
LCD Mount for Screens up to 36”
Item IS-80-TM03
LCD Post Mount for Screens up to 24”
Item IS-80-TM04
(Only for Compact)
...or a complete trade show stand!
Start with a single frame
frame & DisPlay system
FLEXIFRAME® is a registered trademark by Mark Bric AB.
Meeting a great variety
of presentation needs !
Flexiframe is an extremely versatile
framing system to help you arrange
your information and promotional
material in an effective and winning
way. It is extremely well-tested and
has been on the market for over
25 years. A unique modular system
– smart and simple – and very
economically priced.
Standard colors
Special colors
Produced on order. Pantone (PMS) matching. Minimum quantity: 1500 feet
...or a complete trade show stand!
...choose a counter, wall, tower unit...
Start with a single frame
add a stand...
For panels up to 0.220” / 5.5 mm thickness
Flexiframe uses hard boards, instead of soft graphic banners/ panels. This is a more economical and flexible solution.
Choose between different colors, sizes
and shapes
Offers unlimited display applications
Ideal for posters and prints
Easy to change inserts
No special skills or tools needed
Single or double-sided use
5 year warranty
Very economically priced
White (51) Grey (52) Pms 422c red (53) Pms 207c blue (54) Pms 295c black (55) brown (56) Pms 463c Green (57) Pms 349c Grey metallic (59) Pms 430c yellow (60) Pms 107c teal (61) Pms 328c burgundy (62) Pms 7421c Purple (63) Pms 268c hunter green (64) Pms 343c beige(58) Pms 7501c
Company name, logos etc. Produced on order. Minimum quantity: 250 prints
Single frames
Mounting and suspension of single frames
Size Item no. 8.5 x 11” 150 11 x 14” 151 11 x 17” 164 14 x 22” 152 16 x 20” 153 18 x 24” 154 20 x 24” 155 22 x 28” 156 24 x 36” 157 28 x 40” 158 30 x 40” 159 Basic (70x100 cm) 101 Mini (50x70 cm) 103 Basic Header (70x30 cm) 105 Mini Header (50x20 cm) 107
Custom Sizes on Request
Standard sizes
Arrow frames
A perfect frame for directional signage.
Sub-divided frames
Ideal for presentation of multi-messages.
Size Item no. 3 x 8.5 x 11 131
3 x 8.5 x 11 132 Special sizes on order
Size excl. arrow Item no. 28 x 12” 128
20 x 8” 127
17 x 11” 129
11 x 8.5” 130 Custom sizes on request
Flexiframe
Corners
Single frames are delivered with rounded corners as standard.
Top opening
The standard frames are delivered with top opening on the short side for quick panel insert (apart from Basic and Mini headers, with opening on the long side).
If you prefer a different opening or a fully closed frame, please specify when ordering.
Print on profile
Present your graphics, signs, prints etc.
in an eye-catching and attractive way.
The Flexiframe poster frames are available
in many different sizes and shapes.
16 standard colors to choose from.
Wall bracket
Quick mounting Item no. 2000Wall bracket
Fixed mounting Item no. 2001Spring hook
Max. frame size 22 x 28”
Item no. 2010
C-hooks
Item no. 2005Chain
Item no. 2006Window
suction mount
Item no. 2007Slatwall Bracket
Item no. 2003Grid clip
For suspended ceiling mount Item no. 2004Uni-clamp
Use with a stem (2100-2106). Opening 2110 – ½-1½”
2111 – ½-2½” Item no. 2010/2011
Uni-clamp
Use with a stem (2100-2106). Opening ½-1½” Item no. 2112
Stem for clamp
Adjustable height 10-18” Item no. 2100 1½” 2106 4” 2101 8” 2102 12” 2103 16” 2104
Stem for clamp
Prestige
Includes 22 x 28” frame. Available in 2 colors: black (93) or silver grey (98). Posts available in chrome or matching color.
Height including frame - 66”.
Item no. 2404
Universal floorstand
Adjustable for different poster sizes. Chrome (00). Frame widths 15” - 22” Item no. 2400
Frame widths 22” - 30” Item no. 2401
Soft Line
Available in 2 colors: Matte black (93) and silver grey (98). For posters 22 x 28”, 24 x 36” or 30 x 40”. Height including frame: 58” / 67” / 71”. Item no. 2435
X-stand
Available in 2 colors: Matte black (93) and silver grey (98). Adjustable from 11 x 17” to 27-9/16 x 39-3/8”.
Height including frame: 55” Item no. 2436
Flexi-Stand
Ideal to use with ”arrow frames”. Chrome plated (00).
With wire base Height excluding frame 43”.
Item no. 2415 00 Chrome 91 Anthracite
Floor stands
93 Matte black 98 Silver greyMetal colors
A-Stand
– for indoor use
Accepts two posters/sign boards. Size: 22 x 28”. Item no. 7022 arrow frame
Flexiframe
max. frame size 28 x 12”Special
promotion
DuraStand
Includes 22 x 28” frame. Available in anthracite (91). Post available in chrome or black.Height including frame: 64”.
Item no. 2410
Hi-Riser
Includes three 22 x 28” frames. Stand available in black (93)
and anthracite (91). Height including frame: 88”.
Item no. 2416
92
White
Flexiframe can also be used with our
MultiMaster
floor stand –
see page 10.
accepts lightup panel accepts lightup panel
Every floor stand
on this page includes
a frame in the color
of your choice!
Frame support
Chrome plated. Max. frame size 11 x 17”. Equipped with rubber tips.
Item no. 2203
Swing wings, wall-mounted
Metal holder available in 2 standard colors: White (92), and gray (98).
Can be used with any frame size up to 24 x 36”.
For max. 5 frames Item No. 2013
For max. 10 frames Item No. 2014
Hex Base
Height 6 in. Chrome plated (00). For frames up to 11 x 17”.
Item no. 2204 Height 6 in. Chrome plated (00).
Arched feet
Item no. 2306
Frame support
Chrome plated (00). Item no. 2303Tablestand bracket
Chrome plated.Use 2 brackets on frames larger than 8½ x 11”. For square frame corners. Item no. 2205
For rounded frame corners. Item no. 2200
Floor stand brackets
Table stand brackets
Suspension brackets
Plastic connectors for joining frames in square or triangular forms. Ideal for suspension. Available in 5 colors: White (51), red (53), blue (54), black (55) and grey metallic (59).
Support brackets
For swing wing units, item 2013 and 2014, used with frames larger than 11 x17”, we strongly recommend the use of our new support brackets (length 11.5”).
Item No. 2015
Flexiframe
Swing Wing units
The Swing Wing offers plenty of
information in a limited space.
Triangular 60º Item No. 3040
Square 90º Item No. 3041
