• No results found

Other scientific publications

N/A
N/A
Protected

Academic year: 2021

Share "Other scientific publications"

Copied!
10
0
0

Loading.... (view fulltext now)

Full text

(1)

Other scientific publications

Vinha, J. 2015. New Building Physics Handbook. Proceedings of Indoor Climate Seminar 2015, SIY Report 33, Helsinki, March 11, pp. 167–172. (in Finnish)

Salonen, J., Laukkarinen, A. & Vinha, J. 2014. Building-physical Risks of Exterior Walls and

Long-term Solutions. Name of main work: Soikkeli, A., Koiso-Kanttila, J. & Sorri, L. Renovate and

Build Higher – Solutions to Renovating Apartment Buildings and to Building Additional Storeys. Publication A62. University of Oulu, Department of Architecture, Oulu, pp. 74–81. (in Finnish) Leivo, V., Aaltonen, A., Turunen, M., Pekkonen, M. & Haverinen-Shaughnessy, U. 2014. Quality of Indoor Environment and Residential Health in Energy Efficiency Improved Multistorey

Apartment Houses. Proceedings of Indoor Climate Seminar 2014, SIY Report 32, Helsinki, March

13, pp. 225–228. (in Finnish)

Aaltonen, A., Saatsi, P. & Vinha, J. 2013. Analysis of Different Sealing Alternatives on

Traditional Windows by Air Tightness Measurements. Proceedings of the Finnish Building

Physics Symposium 2013: The newest research results and good practical solutions, Proceedings 3, Tampere, Finland, October 22–24, pp. 367-372. (in Finnish)

Aaltonen, A. 2013. Here’s How Our Houses Are Doing – Conclusions of Swedish

BETSI-project. Proceedings of the Finnish Building Physics Symposium 2013: The newest research

results and good practical solutions, Proceedings 3, Tampere, Finland, October 22–24, pp. 127– 132. (in Finnish)

Hilliaho, K., Lahdensivu, J. & Vinha, J. 2013. Energy Consumption Effects of Glazer Space in

Finnish Apartment Houses. Proceedings of the Finnish Building Physics Symposium 2013: The

newest research results and good practical solutions, Proceedings 3, Tampere, Finland, October 22–24, pp. 273-280. (in Finnish)

Huttunen, P. & Vinha, J. 2013. Building-physical Performance and Applications of Large

Raketerm-facade Element. Proceedings of the Finnish Building Physics Symposium 2013: The

newest research results and good practical solutions, Proceedings 3, Tampere, Finland, October 22–24, pp. 55-64. (in Finnish)

Kero, P., Laukkarinen A. & Vinha, J. 2013. Determination of Long-wave Heat Radiation and

Changes in Condensation Risk of Windows. Proceedings of the Finnish Building Physics

Symposium 2013: The newest research results and good practical solutions, Proceedings 3, Tampere, Finland, October 22–24, pp. 77-83. (in Finnish)

Kero, P., Suonketo, J., & Vinha, J. 2013. Evaluation of Mould Repairing Projects Endowed by

Finnish Government, Part 1. Proceedings of the Finnish Building Physics Symposium 2013: The

newest research results and good practical solutions, Proceedings 3, Tampere, Finland, October 22–24, pp. 233-240. (in Finnish)

Laukkarinen A., Korpi, M., Vinha, J. Vaittinen, J. & Vaittinen, T. 2013. Improving of U-value of

Steel-profile Front Doors. Proceedings of the Finnish Building Physics Symposium 2013: The

newest research results and good practical solutions, Proceedings 3, Tampere, Finland, October 22–24, pp. 85-92. (in Finnish)

Laukkarinen A., Vinha, J., Kristo, P., Kristo, K. & Häggblom L. 2013. Hygrothermal Behaviour of

Warm Crawl Space. Proceedings of the Finnish Building Physics Symposium 2013: The newest

research results and good practical solutions, Proceedings 3, Tampere, Finland, October 22–24, pp. 179-187. (in Finnish)

(2)

Mäkitalo, M. & Vinha, J. 2013. Translucent Thermal Insulation Materials and Applications.

Proceedings of the Finnish Building Physics Symposium 2013: The newest research results and good practical solutions, Proceedings 3, Tampere, Finland, October 22–24, pp. 407-415. (in Finnish)

Siivonen, K., Kiljunen, M. & Vinha, J. 2013. The Use of Sprayed Polyurethane Insulation in

Renovation. Proceedings of Building Physics 2013: The newest research results and good

practical solutions, Proceedings 3, Tampere, Finland, October 22–24, pp. 189-198. (in Finnish) Vinha, J., Laukkarinen, A., Mäkitalo, M., Nurmi, S., Huttunen, P., Pakkanen, T., Kero, P., Manelius, E., Lahdensivu, J., Köliö, A., Lähdesmäki, K., Piironen, J., Kuhno, V., Pirinen, M., Aaltonen, A., Suonketo, J., Jokisalo, J., Teriö, O., Koskenvesa, A. & Palolahti, T. 2013. Effects of Climate Change and Increasing of Thermal Insulation on Moisture Performance of Envelope Assemblies and Energy Consumption of Buildings – Conclusions of FRAME-project.

Proceedings of the Finnish Building Physics Symposium 2013: The newest research results and good practical solutions, Proceedings 3, Tampere, Finland, October 22–24, pp. 375-382. (in Finnish)

Vinha, J., Manelius, E., Mäkitalo, M., Nurmi, S., Kuhno, V., Mäkitalo, M., Pirinen, M. & Piironen J. 2013. Determination of Building-physical Reference Years in Finnish Climate. Proceedings of the Finnish Building Physics Symposium 2013: The newest research results and good practical solutions, Proceedings 3, Tampere, Finland, October 22–24, pp. 383-394. (in Finnish)

Vinha, J., Viitanen, H., Peuhkuri, R., Lähdesmäki, K:, Ojanen, T. & Salminen, K. 2013. The Principles and Use of VTT–TTY Mould Growth Model for Moisture Performance Analysis of

Structures. Proceedings of the Finnish Building Physics Symposium 2013: The newest research

results and good practical solutions, Proceedings 3, Tampere, Finland, October 22–24, pp. 67-76. (in Finnish)

Turunen, M., Kiviste M., Pekkonen, M., Leivo, V., Aaltonen, A. & Haverinen-Shaughnessy, U. 2013. Impacts of Improving Energy Efficiency of Buildings on Indoor Air Quality and on

People’s Health in Europe – Project Presentation. Proceedings of Indoor Climate Seminar

2013, SIY Report 31, Espoo, March 13, pp. 349–354. (in Finnish)

Vinha, J., Laukkarinen, A., Mäkitalo, M., Nurmi, S., Huttunen, P., Pakkanen, T., Kero, P., Manelius, E., Lahdensivu, J., Köliö, A., Lähdesmäki, K., Piironen, J., Kuhno, V., Pirinen, M., Aaltonen, A., Suonketo, J., Jokisalo, J., Teriö, O., Koskenvesa, A. & Palolahti, T. 2013. Effects of Climate Change and Increasing of Thermal Insulation on Building-physical Performance of

Envelope Assemblies and Buildings. Proceedings of Indoor Climate Seminar 2013, SIY Report

31, Espoo, March 13, pp. 19-24. (in Finnish)

Kero, P. 2012. Evaluation of Moisture and Mould Damage Repair Process and a Tool

Designed to Ease Renovation Control. Constructors Calendar 2013, Helsinki, Building

information Ltd. Vol. 97, pp. 183-187. (in Finnish)

Vinha, J. 2012. Principles of Building-physical Design and Implementation of Buildings

(updated article). Constructors Calendar 2013, Helsinki, Building information Ltd. Vol. 97, pp. 333-355. (in Finnish)

Kauppinen T., Paloniitty, S., Vinha, J., Aaltonen, A., Manelius, E. & Korpi, M. 2012. Philosophy and Approaches for Air Tightness Requirements in Finland. International Workshop: Achieving Relevant and Durable Air Tightness Levels: Status, Options and Progress

(3)

Kero, P., Suonketo, J. & Vinha, J. 2012. Evaluation of Moisture and Mould Damage Repair

Process. Proceedings of Indoor Climate Seminar 2012, SIY Report 30, Espoo, March 14, pp.

17-21. (in Finnish).

Leivo, V., Aaltonen, A., Turunen, M., Pekkonen, M. & Haverinen-Shaughnessy, U. 2012. Impacts of Improving Energy Efficiency of Buildings on Indoor Air Quality and on People’s Health in

Europe. Proceedings of Indoor Climate Seminar 2012, SIY Report 30, Espoo, March 14, pp.

251-255. (in Finnish).

Ruuhela, R. (ed.) 2012. How Can We Prepare for the Unavoidable Climate Change? –

Conclusions from Adaptation Research in Different Sectors in Finland. Publications of the

Ministry of Agriculture and Forestry 6/2011, Helsinki. 176 p. (in Finnish)

Lindberg, R. 2011. Heat Pump Unit in Subfloor Space. TM Rakennusmaailma, Vol. 11/2011, pp. 30.

Lindberg, R. 2011. Management of Moisture Damage Repairs. RY Rakennettu Ympäristö 1/2011, pp. 35–37. (in Finnish)

Järnström, H., Viitanen, H., Tuomaala, P., Holopainen, R., Vinha, J., Piironen, J., Kero, P., Lehtovaara, J., Puolakka, M. & Halonen, L. 2011. Energy Efficient and Reliable Renovation

Concept – Project Presentation. Proceedings of Indoor Climate Seminar 2011, SIY Report 29,

Espoo, March 16, pp. 195-200. (in Finnish)

Kero, P., Suonketo, J. & Vinha, J. 2011. Evaluation of Moisture and Mould Damage Repair

Process. Proceedings of Indoor Climate Seminar 2011, SIY Report 29, Espoo, March 16, pp.

175-179. (in Finnish)

Vinha, J. 2010. Principles of Building-physical Design and Construction of Buildings

(updated article). Constructors Calendar 2011, Handbook, Index, and CD, Helsinki, Building information Ltd. Vol. 95. pp. 341-360. (in Finnish)

Rytkönen, A., Kirkkari A.-M. (eds.), Ahlqvist, K., Berghäll, E., Heljo, J., Lahti, P., Lapinlampi, T., Massa, I., Perrels, A., Piironen, J., Santala, E., Vienonen, S. & Vinha, J. 2010. Eco-efficiency of

Holiday Homes. The Finnish Environment 6/2010, Ministry of the Environment, Helsinki, 122 p. (in

Finnish)

Lindberg, R. 2010. Causes of Moisture and Mould Damages in Buildings. Ympäristö ja terveys. Vol 41, no. 7, pp. 16–19. (in Finnish)

Aaltonen, A. & Vinha, J. 2009. Determination of Air Tightness of an Apartment Building by Measuring the Air Tightness of the Stairwell and the Apartments that Open into it.

Proceedings of the Finnish Building Physics Symposium 2009: The newest research results and good practical solutions, Proceedings 2, Tampere, Finland, October 27–29, pp. 321-330. (in Finnish)

Aho, H. & Vinha, J. 2009. Guidelines for Implementation of Airtight Constructions and Joints.

Proceedings of the Finnish Building Physics Symposium 2009: The newest research results and good practical solutions, Proceedings 2, Tampere, Finland, October 27–29, pp. 351-360. (in Finnish)

Lähdesmäki, K., Salminen, K., Vinha, J., Strander, T., Viitanen, H., Paajanen, L., Iitti, H., Ojanen, T. & Peuhkuri, R. 2009. Mould Growth within Wall Assemblies in Laboratory and Field Tests.

(4)

good practical solutions, Proceedings 2, Tampere, Finland, October 27–29, pp. 229-238. (in Finnish)

Lähdesmäki, K. & Vinha, J. 2009. Building-physical Behaviour of Raketerm-façade Element.

Proceedings of the Finnish Building Physics Symposium 2009: The newest research results and good practical solutions, Proceedings 2, Tampere, Finland, October 27–29, pp. 127-136. (in Finnish)

Lähdesmäki, K. & Vinha, J. 2009. Condensation Sensitivity of a Well-insulated Window in a

Field Test. Proceedings of the Finnish Building Physics Symposium 2009: The newest research

results and good practical solutions, Proceedings 2, Tampere, Finland, October 27–29, pp. 183-192. (in Finnish)

Ojanen, T., Peuhkuri, R., Viitanen, H., Ojanen, T., Vinha, J. & Lähdesmäki, K. 2009. Modelling of

Mould Growth in Fluctuating Temperature and Moisture Conditions. Proceedings of the

Finnish Building Physics Symposium 2009: The newest research results and good practical solutions, Proceedings 2, Tampere, Finland, October 27–29, pp. 249-258. (in Finnish) Peuhkuri, R., Viitanen, H., Ojanen, T., Vinha, J. & Lähdesmäki, K. 2009. Mould Growth

Resistance of Building Materials and its Modelling in Constant Moisture Stress Conditions.

Proceedings of the Finnish Building Physics Symposium 2009: The newest research results and good practical solutions, Proceedings 2, Tampere, Finland, October 27–29, pp. 239-248. (in Finnish)

Piironen J. & Vinha, J. 2009. Energy Efficient and Moisture Safe Constant Output Heating of

Summer Cottages. Proceedings of the Finnish Building Physics Symposium 2009: The newest

research results and good practical solutions, Proceedings 2, Tampere, Finland, October 27–29, pp. 381-390. (in Finnish)

Salminen, K., Viitanen, H., Paajanen, L., Lähdesmäki, K., Strander, T., Vinha, J., Iitti, H., Ojanen, T. & Peuhkuri, R. 2009. Mould Growth on Building Materials in Laboratory and Field Tests.

Proceedings of the Finnish Building Physics Symposium 2009: The newest research results and good practical solutions, Proceedings 2, Tampere, Finland, October 27–29, pp. 219-228. (in Finnish)

Vinha, J. 2009. Implementation of the New Building Physics Handbook. Proceedings of the Finnish Building Physics Symposium 2009: The newest research results and good practical solutions, Proceedings 2, Tampere, Finland, October 27–29, pp. 301-307. (in Finnish) Vinha, J., Kurnitski, J., Korpi, M. & Mattila J. 2009. Quality Assurance Guideline of Air

Tightness for Industrial Building Contractors. Proceedings of the Finnish Building Physics

Symposium 2009: The newest research results and good practical solutions, Proceedings 2, Tampere, Finland, October 27–29, pp. 361-370. (in Finnish)

Vinha, J. & Venäläinen, A. 2009. The Effects of Climate Change on Moisture Performance of

Low-energy Buildings. Proceedings of the Finnish Building Physics Symposium 2009: The

newest research results and good practical solutions, Proceedings 2, Tampere, Finland, October 27–29, pp. 485-492. (in Finnish)

Vinha, J., Tuominen, T., Kurnitski, J., Korpi, M. & Mattila, J. 2009. Quality Assurance Guideline

for Air Tightness of Industrially Fabricated Houses. Building information Ltd. RT 80-10974, LVI

(5)

Vinha, J. 2009. Issues of Interest to Tampere University of Technology in the New IEA Annex

Proposal, RAP-RETRO. IEA Annex start-up meeting, Gothenburg, Sweden, March 23–24, 4 p.

Palonen, J., Kalamees, T., Jokisalo, J., Eskola, L., Keto, M., Kurnitski, J., Salminen, K., Aho, H., Salminen, M., Korpi, M. & Vinha, J. 2009. Ventilation and Air Tightness of Residential

Buildings – Occupant Comfort of Detached Houses and Apartments. Proceedings of Indoor

Climate Seminar 2009, SIY Report 27, Espoo, March 18, pp. 137-142. (in Finnish)

Vinha, J. 2008. Principles of Building-physical Design and Construction of Buildings

(updated article). Constructors Calendar 2009, Handbook and Index, Helsinki, Building information Ltd. Vol. 93, pp. 362-381. (in Finnish)

Leivo, V. & Lindberg, R. 2008. Savings on Heating and Potentials of Other Energy Savings.

TM Rakennusmaailma, Vol. 8/08, pp. 16–19. (in Finnish)

Vinha, J., Lindberg, R., Pentti, M., Mattila, J., Lahdensivu, J., Heljo, J., Suonketo, J., Leivo, V., Korpi, M., Aho, H., Lähdesmäki, K. & Aaltonen, A. Performance of Envelope Assemblies in Low-energy Houses: Research Results and Recommendations for New Finnish Thermal

Insulation and Energy Consumption Requirements and Guidelines, Final Report. Tampere

University of Technology, Department of Civil Engineering, Structural Engineering, Research report TRT/1706/2008. 88 p. (in Finnish)

Kalamees, T., Vinha, J., Korpi, M. & Kurnitski, J. 2008. Indoor Climate Conditions and

Hygrothermal Loads in Finnish and Estonian Dwellings. Proceedings of the IEA ECBCS

Annex 41 Whole Building Heat, Air, Moisture Response, Subtask 3, Boundary Conditions,

Appendix 1. International Energy Agency. Closing seminar, Copenhagen, Denmark, June 19, pp. 81–92.

Vinha, J., Korpi, M., Kalamees, T., Eskola, L., Palonen, J., Kurnitski, J., Valovirta, I., Mikkilä, A. & Jokisalo, J. 2008. A Research Project on the Temperature and Humidity Conditions,

Ventilation and Air Tightness of Finnish Detached Houses. In: Kumaran, K. & Sanders, C.

Proceedings of the IEA ECBCS Annex 41 Whole Building Heat, Air, Moisture Response, Subtask 3, Boundary Conditions, Appendix 1. International Energy Agency. Closing seminar, Copenhagen, Denmark, June 19, pp. 157–174.

Jokisalo, J., Kalamees, T., Kurnitski, J., Eskola, L., Jokiranta, K., & Vinha, J. 2008. A Comparison of Measured and Simulated Air Pressure Conditions in a Detached House in a Cold Climate.

Proceedings of Building Enclosure Science & Technology Conference, BEST 1, Minneapolis, USA, June 10–12, Session E5-3, 2 p.

Lindberg, R., Korpi, M. & Vinha, J. 2008. Factors Affecting Energy Consumption in Buildings.

Proceedings of Building Enclosure Science & Technology Conference, BEST 1, Minneapolis, USA, June 10–12, Session E5-2, 8 p.

Vinha, J. 2008. Analysis Method to Determine Sufficient Vapour Retarder for Wood Frame

Walls. Proceedings of Building Enclosure Science & Technology Conference, BEST 1,

Minneapolis, USA, June 10–12, Session E5-1, 16 p.

Eskola, L., Kurnitski, J., Jokisalo, J., Palonen, J. & Vinha, J. K. 2008. Ventilation and Sound

Levels of Apartment Buildings. Proceedings of Indoor Climate Seminar 2008, SIY Report 26,

Espoo, March 5, pp. 131-136. (in Finnish)

Lindberg, R. 2008. Energy Consumption of Buildings Depends on User. Engineering for Living, Vol. 2/2008. (in Finnish)

(6)

Lindberg, R. 2008. Buildings with Low Energy Consumption. Asu ja rakenna, Vol. 2/2008, pp. 20–21. (in Finnish)

Jokisalo, J., Kurnitski, J., Kalamees, T., Eskola, L., Jokiranta, K., Korpi, M. & Vinha, J. 2008.

Analysis Method for Determination of Leakage Air Flow Rate in Detached Houses in Finnish

Climate Conditions. Proceedings of Indoor Climate Seminar 2008, SIY Report 26, Espoo, March

5, pp. 165-170. (in Finnish)

Viitanen, H., Peuhkuri, R., Lähdesmäki, K., Vinha, J., Ojanen, T., Paajanen, L. & Salminen, K. 2008. Modelling of Mould Growth – a Tool for Problem Solving. Proceedings of Indoor Climate Seminar 2008, SIY Report 26, Espoo, March 5, pp. 29-34. (in Finnish)

Vinha, J. 2007. The Basic Rules of Applying Building Physics in Design and Construction.

Constructors Calendar 2008, Handbook and Index, Helsinki, Building information Ltd. Vol. 92, pp. 394-409. (in Finnish)

Eskola, L., Kurnitski, J., & Vinha, J. 2007. Ventilation Rates and Sound Levels of Ventilation.

Proceedings of the Finnish Building Physics Symposium 2007: The newest research results and good practical solutions, Proceedings 1, Tampere, Finland, October 18–19, pp. 325-332. (in Finnish)

Heinisuo, M., Ylihärsilä, H., Knuutila, V., Saariaho, A., Vinha, J. & Lähdesmäki, K. 2007.

Hygrothermal Performance of an Aluminium Glass Wall. Proceedings of the Finnish Building

Physics Symposium 2007: The newest research results and good practical solutions, Proceedings 1, Tampere, Finland, October 18–19, pp. 101-111. (in Finnish)

Kalamees, T., Korpi, M., Eskola, L., Kurnitski, J., & Vinha, J. 2007. Distribution of Cold Bridges

and Air Leakages in Finnish Detached Houses and Apartments. Proceedings of the Finnish

Building Physics Symposium 2007: The newest research results and good practical solutions, Proceedings 1, Tampere, Finland, October 18–19, pp. 295-302. (in Finnish)

Korpi, M., Vinha, J., Valovirta, I., Mikkilä, A. & Käkelä, P. 2007. Building-physical Properties of

Construction Materials. Proceedings of the Finnish Building Physics Symposium 2007: The

newest research results and good practical solutions, Proceedings 1, Tampere, Finland, October 18–19, pp. 187-196. (in Finnish)

Korpi, M., Vinha, J. & Kurnitski, J. 2007. Air Tightness of Detached Houses and Apartments.

Proceedings of the Finnish Building Physics Symposium 2007: The newest research results and good practical solutions, Proceedings 1, Tampere, Finland, October 18–19, pp. 253-260. (in Finnish)

Leivo, V., Rantala, J. 2007. Thermal and Moisture Performance Boundary Conditions of

On-Gound Floor Structures. Proceedings of the Finnish Building Physics Symposium 2007: The

newest research results and good practical solutions, Proceedings 1, Tampere, Finland, October 18–19, pp. 39-48. (in Finnish)

Lindberg, R. 2007. Do We Know How Buildings Consume Energy? Proceedings of the Finnish Building Physics Symposium 2007: The newest research results and good practical solutions, Proceedings 1, Tampere, Finland, October 18–19, pp. 21-26. (in Finnish)

Lindberg, R., Wahlman, J., Suonketo, J., Paukku, E. 2007. The Impacts of Intensity of Moisture Flow to Fastness of Surface and Coating in Concrete Base Floors and Intermediate Floors.

Proceedings of the Finnish Building Physics Symposium 2007: The newest research results and good practical solutions, Proceedings 1, Tampere, Finland, October 18–19, pp. 59-66. (in Finnish)

(7)

Salminen, K., Lähdesmäki, K., Strander, T., Vinha, J., Paajanen, L., Iitti, H., Ojanen, T. & Viitanen, H. 2007. Mould Growth in Building Materials in Laboratory and Field Experiments.

Proceedings of the Finnish Building Physics Symposium 2007: The newest research results and good practical solutions, Proceedings 1, Tampere, Finland, October 18–19, pp. 347-358. (in Finnish)

Vinha, J. 2007. Moisture Performance of Timber-framed External Walls in Finnish Climatic

Conditions. Proceedings of the Finnish Building Physics Symposium 2007, The newest research

results and good practical solutions, Proceedings 1, Tampere, Finland, October 18–19, pp. 89-100. (in Finnish)

Vinha, J., Tuominen, T., Kurnitski, J., Korpi, M. & Mattila, J. 2007. Quality Assurance of Air

Tightness in Industrial Building Manufacturing. Proceedings of the Finnish Building Physics

Symposium 2007, The newest research results and good practical solutions, Proceedings 1, Tampere, Finland, October 18–19, pp. 261-263. (in Finnish)

Kalamees, T., Jokisalo, J., Kurnitski, J. & Vinha, J. 2007. Measurements and Simulations of Air

Pressure in a Two-storey Detached House and in a Five-storey Apartment Building. IEA

Annex 41 working meeting, Florianopolis, Brazil, April 16–18, 8 p.

Kalamees, T., Kurnitski, J., Korpi, M. & Vinha, J. 2007. The Distribution of Air Leakage Places and Thermal Bridges of Different Types of Detached Houses and Apartment Buildings.

Proceedings of 2nd European BlowerDoor Symposium, Tight Building Envelope, Thermography, and Dwelling Ventilation, Kassel, Germany, March 16–17, pp. 71–81.

Eskola, L., Kurnitski, J., Jokisalo, J., Jokiranta, K., Palonen, J. & Vinha, J. 2007. Ventilation Rates

of Rooms in Detached Houses. Proceedings of Indoor Climate Seminar 2007, SIY Report 25,

Espoo, March 14, pp. 253-258. (in Finnish)

Kalamees, T., Kurnitski, J., Jokisalo, J. & Vinha, J. 2007. Pressure Differences in Detached

Houses. Proceedings of Indoor Climate Seminar 2007, SIY Report 25, Espoo, March 14, pp. 259–

264. (in Finnish)

Korpi, M., Vinha, J. & Kurnitski, J. 2007. Air Tightness of Heavyweight Detached Houses.

Proceedings of Indoor Climate Seminar 2007, SIY Report 25, Espoo, March 14, pp. 247–252. (in Finnish)

Leivo, V., Rantala, J. 2007. On-Ground Structures – Boundary Conditions of

Building-physical Planning and Renovation. Proceedings of Indoor Climate Seminar 2007, SIY Report

25, Espoo, March 14, pp. 97–102. (in Finnish)

Kalamees, T., Vinha, J. & Kurnitski, J. 2006. The Potential of HVAC Systems and Building

Envelope on the Indoor Climate Stability in Lightweight Detached Houses. IEA Annex 41

working meeting, Lyon, France, October 25–27, 12 p.

Korpi, M., Vinha, J. & Kurnitski, J. 2006. Air Tightness of Heavyweight Detached Houses. IEA Annex 41 working meeting, Lyon, France, October 25–27, 7 p.

Salminen, K., Salminen, M., Korpi, M., Vinha, J., Kurnitski, J., & Kalamees, T. 2006. Moisture

Supply in Heavyweight Detached Houses. IEA Annex 41 working meeting, Lyon, France,

(8)

Vinha, J., Salminen, K., Viitanen, H., & Ojanen, T. 2006. Mathematical Analysis of Mould

Growth Risk in Building Envelopes. CIB W40 Building Science Forum 2006, Syracuse, USA,

September 5–6, 9 p.

Kasanen, P. (ed.), Ahlqvist, K., Aho, H., Heljo, J., Komulainen, V., Kurnitski, J., Lahti, P., Massa, I., Perrels, A., Reijonen, H., Rytkönen, A., Santala, E., Vilpas, R. & Vinha, J. 2006. Survey of Eco-efficient Innovations and Practices, Leisure Living and Eco-efficiency – Pre-study (VAPES).

Nurmijärvi, Work Efficiency Institute, Reports and Guidelines 30. 54 p. (in Finnish)

Leivo, V., Lindberg, R. & Vinha, J. 2005. Target: Cozy and Economical House. Rakennustaito. Vol. 100 (9), pp. 36–38. (in Finnish)

Korpi, M., Eskola, L., Kalamees, T., Vinha, J. & Kurnitski, J. 2005. Ventilation and Energy

Consumption in Finnish Detached Houses. IEA Annex 41 working meeting, Trondheim,

Norway, October 26–28, 8 p.

Salminen, K., Vinha, J. & Viitanen, H. 2005. A Mathematical Modeling of Moisture Behaviour

and Mould Growth in Building Envelopes. IEA Annex 41 working meeting, Trondheim, Norway,

October 26–28, 6 p.

Kalamees, T., Kurnitski, J. & Vinha, J. 2005. Indoor Temperature and Humidity Load in Finnish

Detached Houses. IEA Annex 41 working meeting, Montreal, Canada, May 16–18, 10 p.

Eskola, L., Kurnitski, J., Jokisalo, J., Jokiranta, K., Palonen, J. & Vinha, J. 2005. Ventilation and

Sound Levels of Detached Houses. Proceedings of Indoor Climate Seminar 2005, SIY Report

23, Espoo, February 16–17, pp. 95-100. (in Finnish)

Leivo, V., Rantala, J. 2005. Slab-on-Ground Structures:Temperature and Humidity

Conditions in Filling and Underdrainage. Proceedings of Indoor Climate Seminar 2005, SIY

Report 23, Espoo, February 16–17, pp. 159–164. (in Finnish)

Lindberg, R. 2004. Behaviour of Building Materials and On-Ground Structures. Constructors Calendar 2005, Helsinki, Building information Ltd. Vol. 89, pp. 431-441. (in Finnish)

Korpi, M., Vinha & Kurnitski, J. 2004. Air Tightness – Measurements in 100 Finnish

Timber-framed Houses. IEA Annex 41 working meeting, Glasgow, UK, October 27–29, 6 p.

Valovirta, I., Vinha, J. & Kurnitski, J. 2004. Research Project ”Moisture-proof Healthy Detached

House”. IEA Annex 41 working meeting, Glasgow, UK, October 27–29, 2 p.

Eskola, L., Kurnitski, J., Jokisalo, J., Jokiranta, K., Palonen, J. & Vinha, J. 2004. Ventilation and

Noise Levels in Detached Houses. Proceedings of Indoor Climate Seminar 2004, SIY Report 22,

Espoo, March 17–18, pp. 123–128 (in Finnish)

Korpi, M., Vinha, J., Valovirta, I. & Kurnitski, J. 2004. Air-proofing of Timber-framed Detached

Houses. Proceedings of Indoor Climate Seminar 2004, SIY Report 22, Espoo, March 17–18, pp.

91–96 (in Finnish)

Vinha, J., Korpi, M., Valovirta, I., Kalamees, T. & Kurnitski, J. 2004. Moisture Supply of Indoor

Air in Finnish Detached Houses. Proceedings of Indoor Climate Seminar 2004, SIY Report 22,

Espoo, March 17–18, pp. 81–86 (in Finnish)

Lindberg, R. 2003. Building-physical Behaviour of Structural Components. Constructors Calendar 2004, Helsinki, Building information Ltd. Vol. 88, pp. 425-434. (in Finnish)

(9)

Vinha, J. 2003. Overview of Whole Building Researches at Tampere University of

Technology, Finland. IEA Annex 41 kick off meeting, Leuven, Belgium, November 26–28, 4 p.

Käkelä, P. & Vinha, J. 2003. Drying of Structures, Laboratory Wall Tests. Proceedings of Indoor Climate Seminar 2003, SIY Report 19, Espoo, March 19–20, pp. 85–90. (in Finnish)

Valovirta, I. & Vinha J. 2003. Building-physical Properties of Timber-framed External Wall

Materials. Proceedings of Indoor Climate Seminar 2003, SIY Report 19, Espoo, March 19–20, pp.

91-96. (in Finnish)

Vinha, J. 2003. Project Presentation: Moisture-proof Healthy Detached House. Proceedings of Indoor Climate Seminar 2003, SIY Report 19, Espoo, March 19–20, pp. 61–66. (in Finnish)

Lindberg, R. 2002. Questions about Building Physics. Constructors Calendar 2003, Helsinki, Building information Ltd. Vol. 87, pp. 479-483. (in Finnish)

Leivo, V. & Rantala, J. 2001. Moisture Behaviour of On-Ground Structures. Proceedings of Indoor Climate Seminar 2001, SIY Report 15, pp. 263-268. (in Finnish)

Lindberg, R. 2001. Subfloor Crawl Space. Betoni, Vol. 3/2001, pp. 32–33. (in Finnish)

Vinha, J. 2001. Moisture Behaviour of Timber-framed External Wall Assembly in Different

Seasons. Proceedings of Finnish Civil Engineers Symposium 2001, Helsinki, Finnish Association

of Civil Engineers, 13 p. (in Finnish)

Teikari, M. & Keränen, H. 2000. Determination of Heat Loss of Exterior Walls. Constructors Calendar 2001, Helsinki, Building information Ltd. Vol. 85, pp. 775-786 (in Finnish)

Vinha, J. 2000. Moisture Performance of Timber-framed External Wall Assemblies.

Constructors Calendar 2001, Handbook and Index, Helsinki, Rakennustieto Oy. Vol. 85, pp. 573-582. (in Finnish)

Vinha, J. 2000. External Walls Need a Sufficient Vapour Retarder and an Airtight Air Barrier.

West Finland Alliance Magazine. 4/2000, pp. 13–15. (in Finnish)

Vinha, J. Käkelä, P. & Lindberg, R. 2000. Hygrothermal Behaviour of Building Envelope.

Proceedings of the Baltic Symposium on Indoor Air Quality and Building Physics, Tallinn, Estonia, August 11–12, pp. 92–97.

Vinha, J. 1999. The Breathability of Envelope Assemblies Does Not Reduce the Need of

Ventilation in a Building. West Finland Alliance Magazine. 4/1999, pp. 8-10. (in Finnish)

Vinha, J. 1999. Moisture Performance of External Wall Assemblies – Test Results Produced

by New Research Equipment. Proceedings of Finnish Civil Engineers Symposium 1999, RIL

K-187, Helsinki, Finnish Association of Civil Engineers, pp. 103-114. (in Finnish)

Lindberg, R., Keränen, H. & Teikari, M. 1998. Load-bearing Timber-framed Apartment Building

with Double Frame System. Rakennustekniikka, Vol. 54 (4), pp. 43–47. (in Finnish)

Lindberg, R. & Sutinen, M. 1998 SPU-insulated Floor Removes Problems Associated with

Subfloor Crawl Space. Rakennustaito, Vol. 93, pp. 38–41. (in Finnish)

Lindberg, R. & Sutinen, M. 1998. New Solution for Crawl Spaces Developed at TUT: SPU

(10)

Vinha, J. 1997. The Research on Moisture Performance of Assemblies Becomes More

Effective. New Research Equipment Developed at TUT. The Finnish Construction Magazine.

Vol. 92 (4), pp. 28-29. (in Finnish)

Niemelä, T. & Vinha, J. 1996. The Breathability of a Timber-framed Wall Assembly Does Not

References

Related documents

The defining features that bring value to Brocade Extension in IBM TS7700 Grid environments include Extension Hot Code Load (HCL), Extension Trunking, WAN-Optimized TCP (WO-TCP),

Further, extruded polystyrene (XPS) had the lowest GWP impact factor, which, based on sign convention, indicates a greater negative environmental impact. The major reason for lower

Looking at the amount of bicy- cles that pass the so-called ‘søsnit’ (or ‘lake section’), which constitutes a ring around the inner city of Copenhagen, the number has

Those intuitions remind us of a general trend in cognitive science, according to which cognition does not involve a general mental ability, but rather it consists

Additional mutational analysis o f the SRP9/14p binding site will be conducted in the future, as well as suppressor analysis and synthetic lethality experiments to identify

Findings of this study reinforce the need to integrate the results of multiple echocardiographic methods used in the MR classification. Moreover, it is necessary to establish

Derrida calls the `comparative structure' makes comparison possible, allowing the understanding to grasp the relation of finite to infinite, and at-once impossible, by

Today the energy label does not represent the fact that heat pump dryers – efficiency class A – are twice as efficient as conventional condenser dryers,