Environmental Compliance
Disposal of Waste Equipment by Users in the European Union
This symbol on the product or its packaging indicates that this product must not be disposed of with other waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city recycling office or the dealer from whom you purchased the product. Proposition 65 Warning
This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. EMC (Electromagnetic Compliance)
Avid declares that this product complies with the following standards regulating emissions and immunity: • FCC Part 15 Class B
• ICES-003 Class B • IEC/EN 55022 Class B • IEC/EN 55024 • AS/NZS CISPR 22 Class B • CISPR 22 Class B Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules.
Industry Canada Notice
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matérial brouilleur du Canada.
Declaration of Conformity – (Conformité Europénne)
Avid hereby declares that the product, Pro Tools | Quartet, to which this declaration relates, is compliant with the following Directives or other normative documents: EMC Directive 2004/108/EC
Low Voltage Directive 2006/95/EC RoHS Directive 2011/65/EU
Declaration of Conformity – Japan
Avid hereby declares that the product, Pro Tools | Quartet, to which this declaration relates, is in material conformity with VCCI class B.
Declaration of Conformity – Australia (ACMA) – RCM
Avid hereby declares that the Pro Tools | Quartet is in material conformity with AS/NZS standard requirements.
CAUTION: Changes or modifications not expressly approved by Apogee Electronics Corporation compliance could void the user’s authority to operate the equipment. Rating: 12V 2.5A
Product Information
In order to use your Pro Tools | Quartet, please follow the instructions included with your
Pro Tools | Quartet bundle.
Please address any inquiries to your dealer or directly to Avid at:
Avid Technology, Inc.
280 Bernardo Avenue
Mountain View, CA 94043
Website:
www.avid.com
Support and Knowledgebase:
http://www.avid.com/US/Support
© 2014, Avid, Inc. All Rights Reserved
PN: 9320-65281-00_B
Printed in the U.S.A.
www.Avid.com
www.Avid.com
www.Avid.com
Part Number 9320-65281-00_B
Revision
1.0
Pro Tools® | Quartet
QuickStart Guide
Environmental Compliance
Disposal of Waste Equipment by Users in the European Union
This symbol on the product or its packaging indicates that this product must not be disposed of with other waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city recycling office or the dealer from whom you purchased the product. Proposition 65 Warning
This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. EMC (Electromagnetic Compliance)
Avid declares that this product complies with the following standards regulating emissions and immunity: • FCC Part 15 Class B
• ICES-003 Class B • IEC/EN 55022 Class B • IEC/EN 55024 • AS/NZS CISPR 22 Class B • CISPR 22 Class B Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules.
Industry Canada Notice
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matérial brouilleur du Canada.
Declaration of Conformity – (Conformité Europénne)
Avid hereby declares that the product, Pro Tools | Quartet, to which this declaration relates, is compliant with the following Directives or other normative documents: EMC Directive 2004/108/EC
Low Voltage Directive 2006/95/EC RoHS Directive 2011/65/EU
Declaration of Conformity – Japan
Avid hereby declares that the product, Pro Tools | Quartet, to which this declaration relates, is in material conformity with VCCI class B.
Declaration of Conformity – Australia (ACMA) – RCM
Avid hereby declares that the Pro Tools | Quartet is in material conformity with AS/NZS standard requirements.
CAUTION: Changes or modifications not expressly approved by Apogee Electronics Corporation compliance could void the user’s authority to operate the equipment. Rating: 12V 2.5A
Product Information
In order to use your Pro Tools | Quartet, please follow the instructions included with your
Pro Tools | Quartet bundle.
Please address any inquiries to your dealer or directly to Avid at:
Avid Technology, Inc.
280 Bernardo Avenue
Mountain View, CA 94043
Website:
www.avid.com
Support and Knowledgebase:
http://www.avid.com/US/Support
© 2014, Avid, Inc. All Rights Reserved
PN: 9320-65281-00_B
Printed in the U.S.A.
www.Avid.com
www.Avid.com
www.Avid.com
Part Number 9320-65281-00_B
Revision
1.0
Pro Tools® | Quartet
Connect Power Supply
Connect Cable
Check Firmware Update
Choose Quartet as Input & Output
Connect Microphone*
Connect Headphones
Connecter l'alimentation
Connecter le Câble
Consulter Mise à Jour du Firmware
Choisir Quartet comme Entrée et Sortie
Connecter le Micro
Brancher un Casque
Collega l'alimentazione
Collega il Cavo
Verifica il Firmware
Scegliere Quartet come Entrata e Uscita
Collega il Microfono
Collega le Cuffie
Netzteil Anschliessen
Kabel Anschliessen
Firmware Update Prüfen
Quartet als Input & Output Auswählen
Mikrophon Anschließen
Kopfhörer Anschließen
Conecte Fuente de Poder
Conecte el Cable
Compruebe Actualización de Firmware
Elija Quartet como Entrada y Salida
Conecte Micrófono
Conecte los Audifonos
Conectar a Alimentação
Conecte o Cabo
Verifique Atualização de Firmware
Escolha Quartet como Entrada e Saída
Conecte o Microfone
Conecte os Fones de Ouvido
2
3
4
5
7
8
9
Launch Avid Pro Tools IO Control
Select Mic Input
Select 48 V (Condenser Mic Only)
Lancer Avid Pro Tools IO Control
Sélectionner Entrée Micro
Choisir 48 V (Condenser Mic)
Avvia Avid Pro Tools IO Control
Seleziona Ingresso Microfono
Seleziona 48 V (Mic Condensatore)
Avid Pro Tools IO ControlStarten
Mic Input Auswählen
48 V Auswählen (Kondensatormikrophon)
Abra Avid Pro Tools IO Control
Seleccione la Entrada de Mic
Seleccione 48 V (Mic Condensador)
Lançamento Avid Pro Tools IO Control
Selecione Entrada Mic
Selecione 48 V (Condensa Mic)
12
Set Microphone Level
Adjust Headphone Level
Régler le Niveau du Micro
Régler le Niveau Casque
Regola il Livello Microfono
Regolare Livello Cuffie
Mikrophonlevel Einstellen
Kopfhörer-Level Einstellen
Establecer Nivel de Micrófono
Ajuste Nivel de Audifonos
11
Defina Nível do Microfone
Ajuste o Nível dos Fones de Ouvido
10
13
14
Avid Pro
Tools®
| Quartet
QuickStart Guide
Download Avid Pro Tools IO Control
Télécharger Avid Pro Tools IO Control
Scarica Avid Pro Tools IO Control
Apogee Avid Pro Tools IO Control Herunterladen
Descarga Avid Pro Tools IO Control
Baixar Avid Pro Tools IO Control
Install Avid Pro Tools IO Control
Installer Avid Pro Tools IO Control
Installa Avid Pro Tools IO Control
Avid Pro Tools IO Control Installieren
Instale Avid Pro Tools IO Control
Instale Avid Pro Tools IO Control
6
Your Apple/PC Product
Votre Produit Apple/PC
Il tuo Prodotto Apple/PC
Ihr Apple/PC-Produkt
Su Producto de Apple/PC
Seu Producto Apple/PC
的
Apple/PC
产
品
连接电源
连接线缆
下载
Avid Pro Tools IO Control
检查固件更新
安装
Avid Pro Tools IO Control
将
Quartet
选为输入和输出
连接转接线缆和麦克风
连接耳机
启动
Avid Pro Tools IO Control
选择麦克风输入
选择
48 V
(仅电容式麦克风)
设置麦克风音量
调整耳机音量
!!""#$$%&&#""
Please visit www.Avid.com/Quartethelp
*Microphone Not Included
1
Part Number 9320-65281-00
Description Quartet Quickstart Guide, Inside
Revision 1.0
Connect Power Supply
Connect Cable
Check Firmware Update
Choose Quartet as Input & Output
Connect Microphone*
Connect Headphones
Connecter l'alimentation
Connecter le Câble
Consulter Mise à Jour du Firmware
Choisir Quartet comme Entrée et Sortie
Connecter le Micro
Brancher un Casque
Collega l'alimentazione
Collega il Cavo
Verifica il Firmware
Scegliere Quartet come Entrata e Uscita
Collega il Microfono
Collega le Cuffie
Netzteil Anschliessen
Kabel Anschliessen
Firmware Update Prüfen
Quartet als Input & Output Auswählen
Mikrophon Anschließen
Kopfhörer Anschließen
Conecte Fuente de Poder
Conecte el Cable
Compruebe Actualización de Firmware
Elija Quartet como Entrada y Salida
Conecte Micrófono
Conecte los Audifonos
Conectar a Alimentação
Conecte o Cabo
Verifique Atualização de Firmware
Escolha Quartet como Entrada e Saída
Conecte o Microfone
Conecte os Fones de Ouvido
2
3
4
5
7
8
9
Launch Avid Pro Tools IO Control
Select Mic Input
Select 48 V (Condenser Mic Only)
Lancer Avid Pro Tools IO Control
Sélectionner Entrée Micro
Choisir 48 V (Condenser Mic)
Avvia Avid Pro Tools IO Control
Seleziona Ingresso Microfono
Seleziona 48 V (Mic Condensatore)
Avid Pro Tools IO ControlStarten
Mic Input Auswählen
48 V Auswählen (Kondensatormikrophon)
Abra Avid Pro Tools IO Control
Seleccione la Entrada de Mic
Seleccione 48 V (Mic Condensador)
Lançamento Avid Pro Tools IO Control
Selecione Entrada Mic
Selecione 48 V (Condensa Mic)
12
Set Microphone Level
Adjust Headphone Level
Régler le Niveau du Micro
Régler le Niveau Casque
Regola il Livello Microfono
Regolare Livello Cuffie
Mikrophonlevel Einstellen
Kopfhörer-Level Einstellen
Establecer Nivel de Micrófono
Ajuste Nivel de Audifonos
11
Defina Nível do Microfone
Ajuste o Nível dos Fones de Ouvido
10
13
14
Avid Pro
Tools®
| Quartet
QuickStart Guide
Download Avid Pro Tools IO Control
Télécharger Avid Pro Tools IO Control
Scarica Avid Pro Tools IO Control
Apogee Avid Pro Tools IO Control Herunterladen
Descarga Avid Pro Tools IO Control
Baixar Avid Pro Tools IO Control
Install Avid Pro Tools IO Control
Installer Avid Pro Tools IO Control
Installa Avid Pro Tools IO Control
Avid Pro Tools IO Control Installieren
Instale Avid Pro Tools IO Control
Instale Avid Pro Tools IO Control
6
Your Apple/PC Product
Votre Produit Apple/PC
Il tuo Prodotto Apple/PC
Ihr Apple/PC-Produkt
Su Producto de Apple/PC
Seu Producto Apple/PC
的
Apple/PC
产
品
连接电源
连接线缆
下载
Avid Pro Tools IO Control
检查固件更新
安装
Avid Pro Tools IO Control
将
Quartet
选为输入和输出
连接转接线缆和麦克风
连接耳机
启动
Avid Pro Tools IO Control
选择麦克风输入
选择
48 V
(仅电容式麦克风)
设置麦克风音量
调整耳机音量
!!""#$$%&&#""
Please visit www.Avid.com/Quartethelp
*Microphone Not Included
1
Part Number 9320-65281-00
Description Quartet Quickstart Guide, Inside
Revision 1.0
Connect Power Supply
Connect Cable
Check Firmware Update
Choose Quartet as Input & Output
Connect Microphone*
Connect Headphones
Connecter l'alimentation
Connecter le Câble
Consulter Mise à Jour du Firmware
Choisir Quartet comme Entrée et Sortie
Connecter le Micro
Brancher un Casque
Collega l'alimentazione
Collega il Cavo
Verifica il Firmware
Scegliere Quartet come Entrata e Uscita
Collega il Microfono
Collega le Cuffie
Netzteil Anschliessen
Kabel Anschliessen
Firmware Update Prüfen
Quartet als Input & Output Auswählen
Mikrophon Anschließen
Kopfhörer Anschließen
Conecte Fuente de Poder
Conecte el Cable
Compruebe Actualización de Firmware
Elija Quartet como Entrada y Salida
Conecte Micrófono
Conecte los Audifonos
Conectar a Alimentação
Conecte o Cabo
Verifique Atualização de Firmware
Escolha Quartet como Entrada e Saída
Conecte o Microfone
Conecte os Fones de Ouvido
2
3
4
5
7
8
9
Launch Avid Pro Tools IO Control
Select Mic Input
Select 48 V (Condenser Mic Only)
Lancer Avid Pro Tools IO Control
Sélectionner Entrée Micro
Choisir 48 V (Condenser Mic)
Avvia Avid Pro Tools IO Control
Seleziona Ingresso Microfono
Seleziona 48 V (Mic Condensatore)
Avid Pro Tools IO ControlStarten
Mic Input Auswählen
48 V Auswählen (Kondensatormikrophon)
Abra Avid Pro Tools IO Control
Seleccione la Entrada de Mic
Seleccione 48 V (Mic Condensador)
Lançamento Avid Pro Tools IO Control
Selecione Entrada Mic
Selecione 48 V (Condensa Mic)
12
Set Microphone Level
Adjust Headphone Level
Régler le Niveau du Micro
Régler le Niveau Casque
Regola il Livello Microfono
Regolare Livello Cuffie
Mikrophonlevel Einstellen
Kopfhörer-Level Einstellen
Establecer Nivel de Micrófono
Ajuste Nivel de Audifonos
11
Defina Nível do Microfone
Ajuste o Nível dos Fones de Ouvido
10
13
14
Avid Pro
Tools®
| Quartet
QuickStart Guide
Download Avid Pro Tools IO Control
Télécharger Avid Pro Tools IO Control
Scarica Avid Pro Tools IO Control
Apogee Avid Pro Tools IO Control Herunterladen
Descarga Avid Pro Tools IO Control
Baixar Avid Pro Tools IO Control
Install Avid Pro Tools IO Control
Installer Avid Pro Tools IO Control
Installa Avid Pro Tools IO Control
Avid Pro Tools IO Control Installieren
Instale Avid Pro Tools IO Control
Instale Avid Pro Tools IO Control
6
Your Apple/PC Product
Votre Produit Apple/PC
Il tuo Prodotto Apple/PC
Ihr Apple/PC-Produkt
Su Producto de Apple/PC
Seu Producto Apple/PC
的
Apple/PC
产
品
连接电源
连接线缆
下载
Avid Pro Tools IO Control
检查固件更新
安装
Avid Pro Tools IO Control
将
Quartet
选为输入和输出
连接转接线缆和麦克风
连接耳机
启动
Avid Pro Tools IO Control
选择麦克风输入
选择
48 V
(仅电容式麦克风)
设置麦克风音量
调整耳机音量
!!""#$$%&&#""
Please visit www.Avid.com/Quartethelp
*Microphone Not Included
1
Part Number 9320-65281-00
Description Quartet Quickstart Guide, Inside
Revision 1.0
Connect Power Supply
Connect Cable
Check Firmware Update
Choose Quartet as Input & Output
Connect Microphone*
Connect Headphones
Connecter l'alimentation
Connecter le Câble
Consulter Mise à Jour du Firmware
Choisir Quartet comme Entrée et Sortie
Connecter le Micro
Brancher un Casque
Collega l'alimentazione
Collega il Cavo
Verifica il Firmware
Scegliere Quartet come Entrata e Uscita
Collega il Microfono
Collega le Cuffie
Netzteil Anschliessen
Kabel Anschliessen
Firmware Update Prüfen
Quartet als Input & Output Auswählen
Mikrophon Anschließen
Kopfhörer Anschließen
Conecte Fuente de Poder
Conecte el Cable
Compruebe Actualización de Firmware
Elija Quartet como Entrada y Salida
Conecte Micrófono
Conecte los Audifonos
Conectar a Alimentação
Conecte o Cabo
Verifique Atualização de Firmware
Escolha Quartet como Entrada e Saída
Conecte o Microfone
Conecte os Fones de Ouvido
2
3
4
5
7
8
9
Launch Avid Pro Tools IO Control
Select Mic Input
Select 48 V (Condenser Mic Only)
Lancer Avid Pro Tools IO Control
Sélectionner Entrée Micro
Choisir 48 V (Condenser Mic)
Avvia Avid Pro Tools IO Control
Seleziona Ingresso Microfono
Seleziona 48 V (Mic Condensatore)
Avid Pro Tools IO ControlStarten
Mic Input Auswählen
48 V Auswählen (Kondensatormikrophon)
Abra Avid Pro Tools IO Control
Seleccione la Entrada de Mic
Seleccione 48 V (Mic Condensador)
Lançamento Avid Pro Tools IO Control
Selecione Entrada Mic
Selecione 48 V (Condensa Mic)
12
Set Microphone Level
Adjust Headphone Level
Régler le Niveau du Micro
Régler le Niveau Casque
Regola il Livello Microfono
Regolare Livello Cuffie
Mikrophonlevel Einstellen
Kopfhörer-Level Einstellen
Establecer Nivel de Micrófono
Ajuste Nivel de Audifonos
11
Defina Nível do Microfone
Ajuste o Nível dos Fones de Ouvido
10
13
14
Avid Pro
Tools®
| Quartet
QuickStart Guide
Download Avid Pro Tools IO Control
Télécharger Avid Pro Tools IO Control
Scarica Avid Pro Tools IO Control
Apogee Avid Pro Tools IO Control Herunterladen
Descarga Avid Pro Tools IO Control
Baixar Avid Pro Tools IO Control
Install Avid Pro Tools IO Control
Installer Avid Pro Tools IO Control
Installa Avid Pro Tools IO Control
Avid Pro Tools IO Control Installieren
Instale Avid Pro Tools IO Control
Instale Avid Pro Tools IO Control
6
Your Apple/PC Product
Votre Produit Apple/PC
Il tuo Prodotto Apple/PC
Ihr Apple/PC-Produkt
Su Producto de Apple/PC
Seu Producto Apple/PC
的
Apple/PC
产
品
连接电源
连接线缆
下载
Avid Pro Tools IO Control
检查固件更新
安装
Avid Pro Tools IO Control
将
Quartet
选为输入和输出
连接转接线缆和麦克风
连接耳机
启动
Avid Pro Tools IO Control
选择麦克风输入
选择
48 V
(仅电容式麦克风)
设置麦克风音量
调整耳机音量
!!""#$$%&&#""
Please visit www.Avid.com/Quartethelp
*Microphone Not Included
1
Part Number 9320-65281-00
Description Quartet Quickstart Guide, Inside
Revision 1.0
Connect Power Supply
Connect Cable
Check Firmware Update
Choose Quartet as Input & Output
Connect Microphone*
Connect Headphones
Connecter l'alimentation
Connecter le Câble
Consulter Mise à Jour du Firmware
Choisir Quartet comme Entrée et Sortie
Connecter le Micro
Brancher un Casque
Collega l'alimentazione
Collega il Cavo
Verifica il Firmware
Scegliere Quartet come Entrata e Uscita
Collega il Microfono
Collega le Cuffie
Netzteil Anschliessen
Kabel Anschliessen
Firmware Update Prüfen
Quartet als Input & Output Auswählen
Mikrophon Anschließen
Kopfhörer Anschließen
Conecte Fuente de Poder
Conecte el Cable
Compruebe Actualización de Firmware
Elija Quartet como Entrada y Salida
Conecte Micrófono
Conecte los Audifonos
Conectar a Alimentação
Conecte o Cabo
Verifique Atualização de Firmware
Escolha Quartet como Entrada e Saída
Conecte o Microfone
Conecte os Fones de Ouvido
2
3
4
5
7
8
9
Launch Avid Pro Tools IO Control
Select Mic Input
Select 48 V (Condenser Mic Only)
Lancer Avid Pro Tools IO Control
Sélectionner Entrée Micro
Choisir 48 V (Condenser Mic)
Avvia Avid Pro Tools IO Control
Seleziona Ingresso Microfono
Seleziona 48 V (Mic Condensatore)
Avid Pro Tools IO ControlStarten
Mic Input Auswählen
48 V Auswählen (Kondensatormikrophon)
Abra Avid Pro Tools IO Control
Seleccione la Entrada de Mic
Seleccione 48 V (Mic Condensador)
Lançamento Avid Pro Tools IO Control
Selecione Entrada Mic
Selecione 48 V (Condensa Mic)
12
Set Microphone Level
Adjust Headphone Level
Régler le Niveau du Micro
Régler le Niveau Casque
Regola il Livello Microfono
Regolare Livello Cuffie
Mikrophonlevel Einstellen
Kopfhörer-Level Einstellen
Establecer Nivel de Micrófono
Ajuste Nivel de Audifonos
11
Defina Nível do Microfone
Ajuste o Nível dos Fones de Ouvido
10
13
14
Avid Pro
Tools®
| Quartet
QuickStart Guide
Download Avid Pro Tools IO Control
Télécharger Avid Pro Tools IO Control
Scarica Avid Pro Tools IO Control
Apogee Avid Pro Tools IO Control Herunterladen
Descarga Avid Pro Tools IO Control
Baixar Avid Pro Tools IO Control
Install Avid Pro Tools IO Control
Installer Avid Pro Tools IO Control
Installa Avid Pro Tools IO Control
Avid Pro Tools IO Control Installieren
Instale Avid Pro Tools IO Control
Instale Avid Pro Tools IO Control
6
Your Apple/PC Product
Votre Produit Apple/PC
Il tuo Prodotto Apple/PC
Ihr Apple/PC-Produkt
Su Producto de Apple/PC
Seu Producto Apple/PC
的
Apple/PC
产
品
连接电源
连接线缆
下载
Avid Pro Tools IO Control
检查固件更新
安装
Avid Pro Tools IO Control
将
Quartet
选为输入和输出
连接转接线缆和麦克风
连接耳机
启动
Avid Pro Tools IO Control
选择麦克风输入
选择
48 V
(仅电容式麦克风)
设置麦克风音量
调整耳机音量
!!""#$$%&&#""
Please visit www.Avid.com/Quartethelp
*Microphone Not Included
1
Part Number 9320-65281-00
Description Quartet Quickstart Guide, Inside
Revision 1.0
Environmental Compliance
Disposal of Waste Equipment by Users in the European Union
This symbol on the product or its packaging indicates that this product must not be disposed of with other waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city recycling office or the dealer from whom you purchased the product. Proposition 65 Warning
This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. EMC (Electromagnetic Compliance)
Avid declares that this product complies with the following standards regulating emissions and immunity: • FCC Part 15 Class B
• ICES-003 Class B • IEC/EN 55022 Class B • IEC/EN 55024 • AS/NZS CISPR 22 Class B • CISPR 22 Class B Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules.
Industry Canada Notice
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matérial brouilleur du Canada.
Declaration of Conformity – (Conformité Europénne)
Avid hereby declares that the product, Pro Tools | Quartet, to which this declaration relates, is compliant with the following Directives or other normative documents: EMC Directive 2004/108/EC
Low Voltage Directive 2006/95/EC RoHS Directive 2011/65/EU
Declaration of Conformity – Japan
Avid hereby declares that the product, Pro Tools | Quartet, to which this declaration relates, is in material conformity with VCCI class B.
Declaration of Conformity – Australia (ACMA) – RCM
Avid hereby declares that the Pro Tools | Quartet is in material conformity with AS/NZS standard requirements.
CAUTION: Changes or modifications not expressly approved by Apogee Electronics Corporation compliance could void the user’s authority to operate the equipment. Rating: 12V 2.5A
Product Information
In order to use your Pro Tools | Quartet, please follow the instructions included with your
Pro Tools | Quartet bundle.
Please address any inquiries to your dealer or directly to Avid at:
Avid Technology, Inc.
280 Bernardo Avenue
Mountain View, CA 94043
Website:
www.avid.com
Support and Knowledgebase:
http://www.avid.com/US/Support
© 2014, Avid, Inc. All Rights Reserved
PN: 9320-65281-00_B
Printed in the U.S.A.
www.Avid.com
www.Avid.com
www.Avid.com
Part Number 9320-65281-00_B
Revision
1.0
Pro Tools® | Quartet
QuickStart Guide
Guide Part Number
9329-65464-00-A
MNL PDF, QS GUIDE PRO TOOLS QUARTET
Environmental Compliance
Disposal of Waste Equipment by Users in the European Union
This symbol on the product or its packaging indicates that this product must not be disposed of with other waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city recycling office or the dealer from whom you purchased the product. Proposition 65 Warning
This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. EMC (Electromagnetic Compliance)
Avid declares that this product complies with the following standards regulating emissions and immunity: • FCC Part 15 Class B
• ICES-003 Class B • IEC/EN 55022 Class B • IEC/EN 55024 • AS/NZS CISPR 22 Class B • CISPR 22 Class B Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules.
Industry Canada Notice
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matérial brouilleur du Canada.
Declaration of Conformity – (Conformité Europénne)
Avid hereby declares that the product, Pro Tools | Quartet, to which this declaration relates, is compliant with the following Directives or other normative documents: EMC Directive 2004/108/EC
Low Voltage Directive 2006/95/EC RoHS Directive 2011/65/EU
Declaration of Conformity – Japan
Avid hereby declares that the product, Pro Tools | Quartet, to which this declaration relates, is in material conformity with VCCI class B.
Declaration of Conformity – Australia (ACMA) – RCM
Avid hereby declares that the Pro Tools | Quartet is in material conformity with AS/NZS standard requirements.
CAUTION: Changes or modifications not expressly approved by Apogee Electronics Corporation compliance could void the user’s authority to operate the equipment. Rating: 12V 2.5A
Product Information
In order to use your Pro Tools | Quartet, please follow the instructions included with your
Pro Tools | Quartet bundle.
Please address any inquiries to your dealer or directly to Avid at:
Avid Technology, Inc.
280 Bernardo Avenue
Mountain View, CA 94043
Website:
www.avid.com
Support and Knowledgebase:
http://www.avid.com/US/Support
© 2014, Avid, Inc. All Rights Reserved
PN: 9320-65281-00_B
Printed in the U.S.A.
www.Avid.com
www.Avid.com
www.Avid.com
Part Number 9320-65281-00_B
Revision
1.0
Pro Tools® | Quartet
Environmental Compliance
Disposal of Waste Equipment by Users in the European Union
This symbol on the product or its packaging indicates that this product must not be disposed of with other waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city recycling office or the dealer from whom you purchased the product. Proposition 65 Warning
This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling. EMC (Electromagnetic Compliance)
Avid declares that this product complies with the following standards regulating emissions and immunity: • FCC Part 15 Class B
• ICES-003 Class B • IEC/EN 55022 Class B • IEC/EN 55024 • AS/NZS CISPR 22 Class B • CISPR 22 Class B Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules.
Industry Canada Notice
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matérial brouilleur du Canada.
Declaration of Conformity – (Conformité Europénne)
Avid hereby declares that the product, Pro Tools | Quartet, to which this declaration relates, is compliant with the following Directives or other normative documents: EMC Directive 2004/108/EC
Low Voltage Directive 2006/95/EC RoHS Directive 2011/65/EU
Declaration of Conformity – Japan
Avid hereby declares that the product, Pro Tools | Quartet, to which this declaration relates, is in material conformity with VCCI class B.
Declaration of Conformity – Australia (ACMA) – RCM
Avid hereby declares that the Pro Tools | Quartet is in material conformity with AS/NZS standard requirements.
CAUTION: Changes or modifications not expressly approved by Apogee Electronics Corporation compliance could void the user’s authority to operate the equipment. Rating: 12V 2.5A
