• No results found

Influence of the Oil Churning, the Bearing and the Tooth Friction Losses on the Efficiency of Planetary Gears

N/A
N/A
Protected

Academic year: 2020

Share "Influence of the Oil Churning, the Bearing and the Tooth Friction Losses on the Efficiency of Planetary Gears"

Copied!
8
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Fig. 1. The planetary gear KB+B on the left and on the right planetary gear KB+K can be seen (K-external gear connection, B-internal gear
Fig. 4a. The basic dynamic load rating as a function of the average diameter of deep groove ball bearings (Dimension series 22)
Fig. 5.  The linearization of the basic dynamic load and inner diameter functions
Fig. 8. Power losses generated by oil expel in a planetary gear K+K (Input power: Pin=500 W, tooth numbers: z2=31, z3=30, z2’=30, z3’=31, center distance: aw=76.25 mm, gear ratio: i=15.7541, input speed: nin=1440 1/min, dip lubrication)
+4

References

Related documents

Field experiments were conducted at Ebonyi State University Research Farm during 2009 and 2010 farming seasons to evaluate the effect of intercropping maize with

Background and Objectives: Serratia marcescens , a potentially pathogenic bacterium, benefits from its swarming motility and resistance to antibiotic as two important

class I integrons and antibiotic resistance profile of Salmonella enterica serovars isolated from clinical specimens.. MATeRIAlS AND

A basic task in sentiment analysis is classifying the polarity of a given text at the document, sentence, or feature/aspect level—whether the expressed opinion in

The concurrent effects of a fast national growth rate, of a large and dense residential area and a pressing demand for urban environmental protection create

After Day, in the lighting of Moon Night wakens under a prayer to call hush to Day, time to commune. with Night, windswept under

Product Name Technical Licences Technical Licenses Required/ Optional GIS 8.0 Required GIS_INTERACTIONSERVICE 8.0 Required ics_custom_media_channel 8.0

National Conference on Technical Vocational Education, Training and Skills Development: A Roadmap for Empowerment (Dec. 2008): Ministry of Human Resource Development, Department