• No results found

Geographical Information Based Expert System to Estimate Submersible Pump System Specifications

N/A
N/A
Protected

Academic year: 2020

Share "Geographical Information Based Expert System to Estimate Submersible Pump System Specifications"

Copied!
5
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Fig. 1: Flowchart for estimating submersible pump specification for both offline and online standalone applications
Fig. 4: Expert system form with inputs
Fig. 5: Results produced by expert system

References

Related documents

Just as ancient Romans flocked to mystery cults in the days of religious and political decay, so do more modern men seek out the occult in times of stress or

IMPORTANT: if installing close to a wall or other fixture, use barrel- union connections to allow removal if ever required.. 3) Install the pump UPRIGHT in the tank. The length of

If the pump tries to start and senses that the rotor is locked, it will shut off, wait 2-1/2 minutes, and try to restart.. If the rotor has unlocked, the pump will resume

The power cable shall not enter the motor housing directly but will conduct electricity to the motor by means of a water tight compression fitting cord plate assembly, with molded

The interview included specific questions on (i) knowledge of the concept of biocultural diversity, (ii) how biodiversity and cultural diversity are addressed in policy, and

Based on experi- ments with bovine heart submitochondrial particles (SMP), it is believed that semiquinone (SQ) intermediates appearing during the complex I catalysis are key for

When the irrigation controller starts watering, a submersible pump in the tank pumps the greywater through a filtration system before being dispersed into the landscape through

Nearly one-third of the projects make some references to the lack of effectiveness of education authorities, mentioning the poor levels of institutional development, the absence