• No results found

IIOT and CAN based Industrial Parameters Monitoring and Control

N/A
N/A
Protected

Academic year: 2020

Share "IIOT and CAN based Industrial Parameters Monitoring and Control"

Copied!
5
0
0

Loading.... (view fulltext now)

Full text

Loading

References

Related documents

Doubova et al BMC Pregnancy and Childbirth 2014, 14 168 http //www biomedcentral com/1471 2393/14/168 RESEARCH ARTICLE Open Access Evaluation of the quality of antenatal care

the pattern of the disk-loaded monopole array in which the main beam is steered only in one direction, but the measured gain was reduced, due to the size reduction, to 4.70 dBi which

Segmentation mono or polyphyletic? ELAINE C SEAVER* Kewalo Marine Lab PBRC, University of Hawaii Honolulu, HI, USA ABSTRACT Understanding the evolutionary origins of segmented body plans

In literature, multilevel threshold and optimization methods were used together to detect the iced conductor thickness, but local optimum falling problems

This study was undertaken to assess the knowledge, awareness, and attitude of the medical students toward basic infection control practices, such as standard precautions,

Figure 2.4 Amplitudes of frequency responses of distorted UWB channels: the reflection path (path 3) for different reflector sizes, coordinate (10, 20) in Fig.. 2.4 Modeled

This paper describes the method to estimate safe life of an airplane fuselage with window cut-out, where the safe life is given by summing up the fatigue life and the life of

For COP1-1, the levels of ccg-2 COP1-5 and COP1-6 strains showed dominance to the mRNA were similar to the levels observed in the CCG1M wild-type allele for the Eas-like