Inhalt
Summary
Adhesive spray KIWO FIX 12
All-purpose gloves 9
All-purpose tissues 9
Blade sharpening stone 12
Blowing device 11
Bottle holder 4
Cleaner 8
Cleaning brush, round 9
Cleaning thinner 942 8
Colour guide 3
Developping tray incl. magnetic foil 7
Dosing pipettes 3
Double sided adhesive tape 11
Gloves for cleaning equipment 9
Hand cleaner 10
Hand lotion 10
Key for centering piece 5
Liquid gloves 10
Magnefying loupe 11
Magnetic foil 7
Methylated spirit 8
Mixing cup 4
Mixing cup holder 4
Pad fastening screws 11
Pad printing ink remover TDF 5
Plush cloth 7
Plush cloth rubber 7
Polishing cloth 12
Pot life improver TL 5
Printing blanket 7
Ring blade removal device 5
Screened films 6
Silicone bonding agent ELASTOSIL 12
Spray bottle 4
Superglue LOCTITE 12
Test pen 5
Tool case "Master" 10
Tool case "Universal" 10
Touchscreen pen 11
Transparent adhesive tape 11
Viscospatula 4
Washing container 9
Wash-out solvent 7
Watchmaker's loupe 11
www.teca-print.com
Pad printing equipment & supplies 3
Accessories for inks
Teca-Print offers a variety of accessories to mix inks.
Each article has been tested and optimised to meet the pad printing requirements. We have also developped our own products as for ex-ample the viscospatula.
Teca-Print's pad printing accessories facilitate the daily work and support the preparation for the printing process.
Colour guide
available exclusively at Teca-Print guide for pad printing (approx. 70 shades)
# 706 001 006 (1 piece)
Dosing pipettes
inexpensive tool which greatly facilitates the systematic dosing and application of small amounts of liquid
Inhalt
Viscospatula
for an exact ink viscosity adjustment length 21 cm
available exclusively at Teca-Print
# 90 01 04 (unit with 10 pieces)
Mixing cup holder
robust aluminum holder
H 54 mm, Ø 70 mm, Ø base 90 mm
# 90 09 41 (1 piece)
Spray bottle
solvent resistant plastic bottle, appropriate for solvent dispensing, with cap
volume 500 ml
# 90 09 06 (1 piece)
Bottle holder
metal holder for up to 3 bottles,
with hand tray, can be fixed to the machine base L x W x H = 280 x 190 x 80 mm
# 90 09 02 (1 holder incl. velcro fastening and set of screws)
Mixing cup small
with scales with plate widths and ink cup sizes
200 ml, H 92 mm, Ø 68 mm
# 90 09 40 (unit with 100 pieces)
Mixing cup large without scale
300 ml, H 118 mm, Ø 73 mm
# 90 09 80 (unit with 100 pieces) Mixing cup
plastic cups
solvent resistant for ink mixing
Pad printing equipment & supplies www.teca-print.com 5
Accessories for inks & ink cups
Pad printing ink remover TDF
biological product to remove ink from misprinted parts, appropriate also to remove glue
# F99 00034 2 (200 ml bottle) # F99 00034 4 (1 liter bottle)
Ring blade removal device
easy ring removal device to avoid ring and cup housing damage, also suitable for other ink cup brands
# 89 50 78 (1 piece) Key for centering piece
key for the easy removal of ink cup centering pieces
# 701 908 313 (1 piece) Pot life improver TL
additif to improve the pot life of 2 component inks
# F98 00042 6 (1 kg container)
Test pen
to measure the surface tension of materials before pre-treatment (e.g. PE/PP)
Inhalt
The range of accessories concerning plates goes from screened films to supplies for plate manufacturing and miscellaneous items such as the printing blanket. Detailled information about plates can be found in our documentation "plates".
Screened films for plastic plates
120 lines / cm E7812, 180 x 130 mm # 90 00 23 E7812, 600 x 166 mm # 90 00 24 E7812, 300 x 300 mm # 90 00 33* E7812, 650 x 200 mm # 58257 0001* 80 lines / cm
film for transferring higher ink quantities
D7580, 180 x 130 mm # 90 00 21
D7580, 600 x 166 mm # 90 00 22
Screened films for thin steel plates 05
80 lines / cm F6380, 180 x 130 mm # 90 00 27 F6380, 600 x 166 mm # 90 00 28 N258, 180 x 130 mm # 90 00 31 N258, 500 x 140 mm # 90 00 34* N258, 600 x 166 mm # 90 00 32*
Screened films for steel plates
80 lines / cm
K448, 180 x 130 mm # 90 00 25
K448, 600 x 166 mm # 90 00 26
*= not stocked, available on request
Pad printing equipment & supplies 7
# 90 01 30 # 90 01 32 # 90 01 31
www.teca-print.com
Accessories for plates
Developping tray incl. magnetic foil
You will receive 1 developping tray and a matching magnetic foil.
Spare magnetic foils for developping trays (1 piece) # 728 902 020 # 728 902 054 # 728 902 019 AS 160 - small Inner dimensions: 250 x 150 mm AS 350 - medium Inner dimensions: 439 x 389 mm AS 500 - large Inner dimensions: 619 x 189 mm for AS 160: for AS 350: for AS 500; Wash-out solvent
for alcohol washable polymer plates
# 90 01 50 (1 liter can)
Printing blanket
for use between insertion plate and plate, allows a better adapting of the ink cup to the plate
and reduces unevenness L x W = 250 x 500 mm # 59757 0004 (1 piece)
L x W = 250 x 1000 mm # 59757 0005 (1 piece)
L x W = 500 x 1000 mm # 59757 0003 (1 piece) Plush cloth rubber
L x W x H = 130 x 75 x 30 mm
# 90 01 40 (1 piece incl. 1 plush cloth)
Spare plush cloth
L x W = 220 x 75 mm
Inhalt
Cleaning
Teca-Print offers you several products facilitating the cleaning process and saving work time. A lot of pro-ducts can be used for manual cleaning or with our cleaning equipment.
Furthermore we supply skin care products to protect and regenerate your skin during and after the work with solvents.
1 liter can 5 liter can 25 liter can 30 liter can
Cleaner RE F91 00031 4 F91 00031 5 - F91 00031 8
Cleaner RB
mild & bio-degradable F98 00032 4 F98 00032 5 F98 00032 8
-Cleaner RC
suitable for ultra sonic device flash point 75 °C
F99 00033 4 F99 00033 5 F99 00033 8
-Cleaner
We offer several cleaning agents to clean ink soiled equipment by hand or with Teca-Print cleaning equip-ment.
Please find the article numbers of our cleaning agents in the list below.
Cleaning thinner 942
Not for use with cleaning equipment!
# 58077 0005 (6 liter can) # 58077 0020 (20 liter can)
Methylated spirit
universal product for manual cleaning
Pad printing equipment & supplies www.teca-print.com 9
Cleaning
All-purpose tissues
robust and tearproof, lint-free size 31,5 x 33 cm # 90 01 45 # 90 01 46 # 55796 0005 # 55796 0006 # 55328 0001 # 55387 0002 #58281 0091 size 9, 1 pair size 10, 1 pair 1 box of 912 pieces 1 unit with 76 pieces
size 7 ½, 1 pair size 9 ½, 1 pair size 10 ½, 1 pair
Gloves for cleaning equipment WG 701 and WG 902
model red with black cuffs extremely solvent resistant
model black solvent resistant
Washing container
Ø 300 mm, H 125 mm, galvanized
# 90 09 36 (1 piece)
Cleaning brush, round
length 225 mm, Ø 20 mm
# 90 09 30 (1 piece) All-purpose gloves
green, size 9
Inhalt
Skin care, tool case
Hand cleaner
gentle and thorough hand- and skin cleaner to remove ink and lacquer tough stains
# 55585 0004 (1 liter bottle) Hand lotion
skin care and protection lotion for use after contact with inks, thinners, cleaners, adhesives and lacquers
# 55585 0005 (200 g tube) Liquid gloves
special water-soluble hand protection "liquid gloves" for use before working with inks, thinners and lacquers
# 90 09 55 (200 ml bottle) Tool case " Master"
grey plastic case with content L x W x H = 380 x 110 x 300 mm
# 99 02 06 (1 piece)
Tool case "Universal"
grey plastic case with content L x W x H = 345 x 60 x 300 mm
# 99 02 04 (1 piece)
Content: folder test pen
double open ended wrench 16 x 17 mm wrench 4,0 mm jeweler's screwdriver hexagon key 3 x 75 mm viscospatula colour guide grease gun phillips srewdriver
hexagon key with t-handle 4 x 150 mm allen key with ball end, sizes 2,5 and 3 mm allen key, sizes 3 / 4 / 5 / 6 mm slotted screwdriver, sizes 4,5 and 5,5 mm watch makers loupe
touchscreen pen pad fastening set key for electric cabinet
Content: double open ended wrench 16 x 17 mm wrench 4,0 mm jeweler's screwdriver hexagon key 3 x 75 mm hexagon key with t-handle 4 x 150 mm
Pad printing equipment & supplies www.teca-print.com 11
Watchmaker's loupe
3-fold magnification, loupe diameter 28 mm Ø = 39 mm, H = 30 mm
# 12 80 08 (1 piece)
Pad fastening screws
recess head screw 4,2 x 16 mm
# 99 01 04 (unit with 20 pieces)
Transparent adhesive tape
width 75 mm
# 55479 0005 (66 m roll)
Touchscreen pen
ideal to operate the touchscreens of our machines
# 55000 0364 (1 piece) Magnifying loupe F + C
premium quality magnifying loupe with millimeter scale, angular and circular measurement, 8-fold magnification, with adjustment lever, excellent to check films and plates
B = 40 mm, H = 50 mm
# 12 80 03 (1 piece incl. protecting case) Blowing device
to blow on the ink on the pad or printed part
# BG1 000 954 (1 piece)
Double sided adhesive tape
versatile adhesive tape, extremely solvent resistant, ideal for fixing ink separators on the plate for multiple colour prints
# 90 09 10 (50 m roll) # 90 09 11 (50 m roll)
narrow (width 10 mm) wide (width 30 mm)
Inhalt
Miscellaneous
Silicone bonding agent ELASTOSIL
versatile with high bonding power,
ideal for re-attaching loose pads to base plates, with dosage nozzle and rolling clamp
# 90 09 21 (90 ml tube) Adhesive spray KIWO FIX
non-permanent
# 90 00 10 (500 ml can) Superglue LOCTITE
for metals, plastics, rubber etc.
# 58163 0002 (20 g bottle) Blade sharpening stone
to sharpen new blades
L x W x H = 100 x 50 x 10 mm
# 99 01 12 (1 piece) Polishing cloth
280 x 230 mm
