Getting Started
LDP-7000 Series Model 7016D & 7024D Input / Output Devices and Button Cable Connection
ADP (Additional Device Port Placing or answering a call
1. Placing a call 2. Answering a call
3 Soft Button & Navigation Button Basic Function 1. Idle 1.1 Pickup 1.2 Conference 1.3 Redial 2. Off Hook 3. Intercom Dialing 4. Intercom Ring Back 5. Intercom Busy
6. Intercom Do Not Disturb 7. Intercom Dialing Error 8. Intercom Receiving 9. Intercom Talk 10. CO Dialing 10.1 Manual Dialing 10.2 Speed Dialing 11. CO Line Busy 12. CO Talk
13.Two way Recording
14.Checking Voice mail messages 15.Paging
16.Call Forward
16.1 Follow-me Forward
16.2 Unconditional, Busy, No Answer, Busy/No answer Forward 16.3 Unconditional, No Answer Off-net Forward with speed bin 16.4 Unconditional, No Answer Off-net Forward telephone number 17.Flexible Button Program
18.Park a call and Retrieve a Parked call 19. Name Display On my phone
20. Barge-In Monitor
21.Use my voice mail(VMIU card required)
Call Log
1. Received Call 2. Dialed Call 3. Lost Call
3.1 Answer
3.2 Del Cur (Delete Current) 3.3 Del All (Delete All) 3.4 Save
3.5 Name/Tel Menu
1. Basic Program
1.1 Station name program 1.2 Ring program 1.2.1 Select Ring 1.2.2 Select melody 1.3 Mode (H/T/P) Program 1.4 Password Program 1.4.1 Password Register 1.4.2 Password Change 1.5 Language Program 1.6 ENBLOCK Mode Program 2. Advanced Program 2.1 Wake up Program 2.1.1 Setting 2.1.2 Canceling 2.2 Pre-selected MSG PGM 2.2.1 Select the MSG PGM 2.2.2 Canceling/ Changing 2.3 Station COS Program
2.3.1 COS Down Mode 2.3.2 Restoring COS Mode 2.3.3 Walking COS Mode 2.4 SPK/Headset Program 2.5 EAR MIC Program 3. Speed Program 4. Mobile Extension PGM
4.1 Mobile-EXT. NUM PGM 4.2 Mobile-EXT Enable 5. Conference Room PGM
5.1 Create CONF Room 5.2 Delete CONF Room
Table of Contents
Phone Book
1. Dial By ICM Name 2. Dial By STA SPD name 3. Dial By SYS SPD Name Attendant Function
1.Set or Change the DATE/TIME 2.Change DATE Format
3.Attendant intrusion
4.Overriding an Extension in DND Mode 5.Setting DAY/NIGHT/WEEKEND Mode 6.Storing System Dials
7.Changing Temporary COS(Class of service) Entering characters Glossary of Terms 45 45 46 46 47 47 47 47 48 48 49 49 50 51 6. Hot Desk Program
6.1 Hot Desk Log in 6.2 Hot Desk Log out
LDP-7000 Series, Model 7016D & 7024D
LDP-7016D/7024D are advanced, user-friendly digital keysets, offering the convenience of 3 soft buttons and a navigation key.
LDP-7024D
• Features
-.Trendy and Stylish LDP Family design -.Multi Level 3 Line LCD (3 x 24)
-.16 or 24 Flexible buttons with dual-color LED’s -.Additional Device Port (ADP) for SLT or FAX -.Call Log Feature
-.Call Recording Feature – 7024D only (Optional USB Module). -.Hands-Free Solution – 7024D only (Optional Blue- Tooth Module). -.Wall Mountable (Bracket Optional)
Input / Output Devices and Buttons
Handset Earphone-Jack Socket (Ear/Mic Mode) Speaker Speed Button Dnd/Fwd Button Speaker Button Hold/Save Button 3 Soft ButtonVisual Ringing LED Trans/Pgm Button
Flexible Button (Loop Button) Call back Button
Volume Button
Hands-free Microphone Menu Button
Used for handset call.
Used to connect optional headset to the phone. Outputs tones and voice.
Used to access speed dialing, speed programming, save number redial, and last number redial.
The DND (Do Not Disturb) feature blocks all incoming calls. When DND is active, the red LED in this button is illuminated.
It is also used to activate call forward, e.g. to another station or voicemail. When call forward is activated, the red LED flashes.
Speaker toggles the speakerphone state, and the red LED is illuminated when the speakerphone is active.
This button is used to put a call on hold or save information when programming.
Used in conjunction with fixed and flexible features, and the function changes in relation to call progress, as indicated on the LCD display. Displays information about telephone status, dialing directories,and test message information.
Illuminates when the phone is ringing.
This button is used to initiate a call transfer (TRS) or to enter programming mode (PGM)
Some flexible buttons are pre-programmed in the system for line appearances, loop functions etc. The remaining flexible buttons can be user-programmed.
A station can initiate a call back request to a busy station. Once that station becomes idle, the initiating station is signaled.
The volume button adjusts the audio levels for ringing, handset and speakerphone functions.
Microphone is used for hands-free speakerphone function.
The menu button is used to move to the desired option(Dial, MSG, Program), and to select the next screen when indicated by an arrow on the LCD display.
Used to access speed dialing, save number redial, and last number redial, and to access flexible button programming.
Handset Earphone-Jack Socket Speaker Speed Button DND/Fwd Button Speaker Button Hold/Save Button 3 Soft Buttons LCD Display
Visual Ringing LED
Trans/PGM Button
Flexible Button
Call back Button
Cable Connection
Cable connections
A - Connect the telephone cord (curly cord) to the handset and the other end to the handset jack at the bottom of the telephone.
B - Connect the line cable to the port at the bottom of telephone and the other end to the wall socket.
C - Connect the Headphone to the headphone jack on the left side of the telephone. (As viewed from the front.)
Getting Started
A
ADP (Additional Device Port)
1. Placing a Call
Lift handset
▶
Enter the extension number
Dial 9 or select CO line flexible button.
talk ▶
2. Answering an Outside Call
or Lift handset or ▶ talk CO Line ICM Line Lift handset ▶
The 3 Soft Buttons are located on the bottom of the LCD display. The function of each button changes, subject to call status and progress. The current functions are displayed on the LCD screen, directly above each button. For example, if the user calls a busy extension, busy tone will be heard and the busy status displayed. The LCD screen will display the busy message along with the different options available - “Message Wait”, “Camp-On” and “Flash”. By pressing the relevant button the desired feature is activated.
3 Soft Button
Navigation Button
In some instances, more than 3 current functions are available to the user, and this is indicated by the appearance of a left (I) or right (J) arrow in the LCD screen, (see below). By pressing the navigation key (located below the volume button), in the direction corresponding to the arrow, any additional functions will be displayed.
BUSY : STA 100 [CALLBK] CAMP(*) STEP MSG CAMP-ON FLASH STATION 100 (T) FEB 01 04 05:34 pm FWD CONF REDIAL → STATION 100 (T) FEB 01 04 05:34 pm ← ICM FLASH
By pressing one of the 3 soft buttons you are able to select the indicated function. For instance, if you want to select call pickup (as shown below), press the first button on the left. If there are more than three functions available at any point, an arrow will be displayed on the LCD display. Use the navigation key to move the next or previous screen to display additional functions.
3 Soft Buttons are located below the LCD display.
1. Idle
PICKUP : press to pickup a call ringing within the same pickup
group.
CONF : press to initiate & activate a conference. REDIAL : press to redial last number called.
1.1 Pickup
CALL TO STA 104 PICKED UP FROM 101 05:37pm TRANS CONF MUTE→
A station can pickup a call ringing to an unattended station within the same pickup group by using the pickup procedure.
＊ Refer to ipLDK system & ipLDK system programming manual. Press [PICKUP] button.
Talk STATION 100 (T)
FEB 01 04 05:34 pm PICKUP CONF REDIAL
1.2 Conference
CALL TO STA 100 FEB 01 04 05:34 pm MSG FLASH CALL TO STA 100 FEB 01 04 05:34 pm TRANS CONF MUTEDial the desired station number. (e.g.100)
Station 100 answers the call.
Press [CONF] button.
CONFERENCE FEB 01 04 05:34 pm FWD CONF REDIAL →
Dial the phone number of the next desired station. (e.g.104)
CALL TO STA 104
FEB 01 04 05:34pm MSG FLASH
Station 104 answers the call.
CALL TO STA 104
FEB 01 04 05:34 pm TRANS CONF MUTE
Press the [CONF] button twice.
CONFERENCE FEB 01 04 05:34 pm CONF MUTE
1.3 Redial
Press the [REDIAL] button.
123456789 26/12 16:00
BACK OK
Press [OK] button to call.
123456789
LINE 008 00:00:10 TRANS CONF MUTE →
Talk STATION 100 (T)
FEB 01 04 05:34 pm PICKUP CONF REDIAL
2. Off Hook
STATION 100 (T) FEB 01 04 05:34 pm FWD CONF REDIAL→
FWD : Press the [FWD] button to forward calls to another station, Voicemail etc.
CONF : Press the [CONF] button to initiate a conference call.
REDIAL : Press the [REDIAL] button to call last number dialed.
3. Intercom Dialing
STATION 100 (T) FEB 01 04 05:34 pm FLASH
FLASH : If you wish to terminate an ICM call and make another
call, press [FLASH] to re-seize dial tone. STATION 100 (T)
FEB 01 04 05:34 pm ← ICM FLASH
ICM : If, while on a call, ICM call is received, press the [ICM]
button to place 1stcall on hold and answer 2ndcall.
FLASH : If you wish to terminate an ICM call and make another
call, press [FLASH] to re-seize dial tone
4. Intercom Ring Back
CALL TO STA 100
FEB 01 04 05:34 pm MSG FLASH
MSG : Press to leave a your station number or message.
FLASH : Press to disconnect the line and re-seize.
5. Intercom Busy
BUSY : STA 100 [CALLBK] CAMP ( * ) STEP MSG CAMP-ON FLASH→
MSG : Press to leave your station number or message. CAMP-ON : Press to send a call waiting tone to a busy station
(indicating that they have a call waiting).
FLASH : Press to disconnect the line and re-seize.
7. Intercom Dialing Error
INVALID
FEB 01 04 05:34 pm FLASH
FLASH : Press to disconnect the line and re-seize.
6. Intercom Do Not Disturb
DO NOT DISTURB STA 100 CALLBK FLASH
CALLBK : Press leave a call back request or message. FLASH : Press to disconnect the line and re-seize.
8. Intercom Receiving
CALL FROM STA 104
FEB 01 04 05:34 pm DND
DND : Press to block all incoming calls. (Do Not Disturb)
9. Intercom Talk
CALL FROM STA 104
FEB 01 04 05:34 pm TRANS CONF MUTE
TRANS : Press to transfer an incoming call to another station. CONF : Press to initiate a conference call.
MUTE : Press to mute the handset, speakerphone, or headset
microphone. Press the [SPEAK] button to re- activate microphone.
10. CO Dialing
11. CO Line Busy
CO LINE 001 BUSY QUEUING ([CALLBK]) CALLBKCALLBK : If, after dialing ‘9’ for a CO line, busy tone indicates
no lines are available, press [CALLBK] to reserve a CO line.
STATION 100 (T) LINE 08 00:00:03 TRANS CONF MUTE →
Press programmed flexible button for CO.
(CO can be accessed by dialing CO access code 9 or individual CO access code)
Dial telephone number.
10.1 Manual Dialing
SPD_NO LAST(*) SAVE(#) DIAL_BY_NAME([SPEED]) SPEED
10.2 Speed Dialing
Press [SPEED] button.
Dial speed bin number.
SPD_NO LAST(*) SAVE(#) DIAL_BY_NAME([SPEED]) SPEED
Press SPEED to search speed dial by name.
1. DIAL BY ICM NAME 2. DIAL BY STA SPD NAME
OK
Press OK to enter DIAL BY STA / SYS SPD NAME.
12. CO Talk
13. Two way Recording
Basic Function
14. Checking Voice mail messages
123456789
LINE 08 00:00:03 ←RECORD FLASH ACNR
RECORD : Press to record the current conversation. (if fitted) FLASH : Press to disconnect the line and re-seize. ACNR : Press to set automatic called number redial.
123456789
LINE 08 00:00:03 TRANS CONF MUTE →
TRANS : Press to transfer a call to another station. CONF : Press to initiate a conference call.
MUTE : Press to mute the handset, speakerphone, or headset
microphone. Press the [SPEAK] button to re- activate microphone.
Press RECORD to record CO conversation on VMIB. or, Press programmed Two way record button.
If Phone have Two way recording button, the LED is flashing while recording.
Two way record button PGM:
[TRANS/PGM] + Flexible button + [TRANS/PGM] + 5 4
VMIB MSG FROM EXTERNAL NEXT REPEAT DELETE →
VMIB MSG FROM EXTERNAL ← ADD REWIND CALLBK
ADD : Press to tag the current message with your comment
before forwarding.
REWIND : Press to repeat part of current message.
CALLBK : Press to request a call back to the caller who leaved
message.
NEXT : Press to move to the next message. REPEAT : Press to repeat the current message. DELETE : Press to erase the current message.
※ Voice mail message can be transferred to desired station by dialing station number while the message is heard.
123456789
15. Paging
You may receive announcements from other stations and/or external speakers. Stations are assigned to one or more of the Internal Page Zones. The system has one External Page Zones that are connected to external speakers.
PAGE FROM STA 103
20 AUG 04 11:51am MEET ME
MEET ME : Press to answer a paging request.
16. Call Forward
FOLLOW-ME FORWARD ENTER STATION NO.
Enter Dial 0.
Enter follow-me station number.
16.1 Follow-me Forward
ENTER FORWARD TYPE ( 0 – 9 , # )
Press [ SPEAKER ] button. Press [ DND/FWD ] button.
16.2 Unconditional, Busy, No Answer, Busy/No answer Forward
UNCONDITIONAL FORWARD ENTER STA/HUNT/#(VMIB)
Enter forward type.
1: Unconditional 2: Busy
3: No answer 4: Busy/No answer Enter forward destination (STA/HUNT/VMIB).
STA : station number, HUNT : Hunt group, VMIB : #
16.3 Unconditional, No Answer Off-net Forward with speed bin
FORWARD TO OFF-_NET ENTER CO BTN/SPD-BIN
Enter off-net forward type.
5: Unconditional 6: No answer
Press desired CO button for off-net( This can be skipped.) Enter speed bin number.
16.4 Unconditional, No Answer Off-net Forward with telephone number
FORWARD TO OFF-_NET ENTER CO BTN/SPD-BIN
Enter off-net forward type.
8: Unconditional 9: No answer
17. FLEXIBLE BUTTON PROGRAM
Basic Function
• Press the [TRANS/PGM] button
• Press the flexible button to be programmed • Enter the desired feature code below table. • Press the [HOLD/SAVE] button to save.
*) The following Numbering Plan code can be changed by Admin Programming 104-107, 109 depending on the user’s needs.
Ring Type Enblock mode Ear-Mic Headset ICM Ring CO Ring COS Down COS RESTORE Walking COS COS CHANGE
Auth. Code Register Auth. Code Change Mobile Ext Activation Mobile Ext Hunt Call
Set Wake-up Time Wake-Up Erase Conf- Room Activate Conf-Room Deactivate CALL COVERAGE CALL COVERAGE FOR
Set Pre-selected MSG Set Customer MSG Station CLIR(Toggle) Two way Record Call Log
Record User Greeting Listen Time & Date Listen Station Number Listen Station Status Record Page MSG Erase User Greeting Erase Page MSG DVM Answer - Ring DVM Answer – Speaker DVM Record DVM Pause Function TRANS/PGM + 11 TRANS/PGM + 14 TRANS/PGM + 17 TRANS/PGM + 18 TRANS/PGM + 19 TRANS/PGM + 21 TRANS/PGM + 22 TRANS/PGM + 23 TRANS/PGM + 24 TRANS/PGM + 31 TRANS/PGM + 32 TRANS/PGM + 34 TRANS/PGM + 36 TRANS/PGM + 41 TRANS/PGM + 42 TRANS/PGM + 43 TRANS/PGM + 44 TRANS/PGM + 45 TRANS/PGM + 46 TRANS/PGM + 51 TRANS/PGM + 52 TRANS/PGM + 53 TRANS/PGM + 54 TRANS/PGM + 57 TRANS/PGM + 61 TRANS/PGM + 62 TRANS/PGM + 63 TRANS/PGM + 64 TRANS/PGM + 65 TRANS/PGM + 66 TRANS/PGM + 67 TRANS/PGM + 68 TRANS/PGM + 69 TRANS/PGM + 6* TRANS/PGM + 6# Code Number LCD Display Language Background Music Register Station Name Speakerphone/Headset Headset Ring Mode USB Always Record
Account Code DID Call Wait ICM Hold LOOP button Camp-on INTURSION HUNT DND(group only) KEY PAD FACILITY ACD STATUS(group only) PAGER CALL CONF button CALLBK button DND/FWD button FLASH button MUTE button MON button REDIAL button DID RESTRICTION DISA RESTRICTON USB CALL RECORD
18. PARK A CALL AND RETRIEVE A PARKED CALL
• Press the [TRANS/PGM] button • Dial “7 4”
• Enter your name (see Entering character table in page 58) For example to enter the name “JOHN”
• Press the [HOLD/SAVE] button
19. NAME DISPLAY ON MY PHONE
• To park a call,
Press [TRANS/PGM] and dial the Park Location(601-608). • To retrieve a parked call at any station,
Dial the Park Location (601-608).
A call can be parked in a parking location and the call will be retrieved by dialing the location number. (The call can be picked up by other extension.)
Name can be displayed instead of station number.
20. Barge-In Monitor
MONITOR STA 101 JOIN DROP
JOIN : Press to join the conversation during monitor
DROP : Press to drop the conversation
BUSY : STA 101 [CALLBK] CAMP ( * ) STEP MSG CAMP-ON FLASH→
MSG : Press to leave your station number or message. CAMP-ON : Press to send a call waiting tone to a busy station
(indicating that they have a call waiting).
FLASH : Press to disconnect the line and re-seize.
Barge-in permits an authorized extension to intrude into other existing outside/internal calls. Between intruding extension and parties on initial calls a conference call is established.
BUSY : STA 101 [CALLBK] CAMP ( * ) STEP ← MONITOR
MONITOR : Press to listen to existing conversation
21. USE MY VOICE MAIL(VMIB CARD REQUIRED)
Basic Function
To record a personal greeting,
- Press the [TRANS/PGM] button and dial “6 1”. - Press # to start recording.
To forward my phone to Voice Mail,
- Press the [SPEAKER] button - Press the [DND/FWD] button - Dial the type of forwarding you want:
. Dial “1” for Unconditional . Dial “2” for Busy
. Dial “3” for No Answer
. Dial “4” for Busy and/or No Answer
- Dial “#”(confirmation tone will be heard if forwarding has been set).
To retrieve messages,
- When Voice message is leaved on the station, phone LCD will display as below. When VMIB is installed, Voice mail service can be used.
MSG: VMIB(2)
PICKUP CONF REDIAL
Press the [CALL BACK] button.
NEXT : Play next message
REPEAT : Repeat playing current message. DELETE : Delete current message.
MSG FROM: STA 100
NEXT REPEAT DELETE →
ADD : Add a message to the message which is
being played.
REWIND : Rewind a part of message.
CALL BK : Call back request to the caller who leaved
message. MSG FROM: STA 100
22. CALL BACK
When a called station is in busy, call back can be requested.
To answer the second(waiting) call, press flashing [HOLD/SAVE] button. BUSY : STA 105
[CALLBK] CAMP(*) STEP MSG CAMP FLASH →
MSG : Press to request call back.
CAMP-ON : Press to send a call waiting tone to a busy station. FLASH : Press to disconnect the call and re-seize.
CAMP-ON BY STA 105 05 MAR 06 09:51 TRANS CONF MUTE →
VOICE OVER STA 101 05 MAR 06 09:51 TRANS CONF MUTE →
Whenever [HOLD/SAVE] button is pressed, call will be switched between first and second call.
BUSY : STA 105
[CALLBK] CAMP(*) STEP MSG CAMP FLASH →
When a called station is in busy, camp-on can be requested.
Press the [Call Log] button.
1. Received Call
123456789 02/01 09:02
BACK OK
Press [OK] or button.
Press [OK] or button.
123456789
LINE 125 00:00:03 TRANS CONF MUTE →
RECEIVED CALL : Received call list * DIALED CALL : Dialed call list
LOST CALL : Missed call list*
1 1.RECEIVED CALL 2. DIALED CALL OK 1 1.RECEIVED CALL 2. DIALED CALL OK
Call Log Button PGM : PGM + Flexible + PGM ’57’
1
3.LOST CALL
∧ OK
Call Log
* CLI (Calling Line ID) mandatory.
2. Dialed Call
123456789 02/01 09:02
BACK OK
Press [OK] or button.
Press [OK] or button.
123456789
LINE 125 00:00:03 TRANS CONF MUTE →
NOTE NOTE
Return to the previous BACK
2
1. RECEIVED CALL
2.DIALED CALL
3. Lost Call
Press [OK] or button. 3 3.LOST CALL ∧ OK 0123456789 03/10 16:02 CNT :01 BACK SELECT> ANSWER
Press the [SELECT] button to select the following functions: ANSWER, DEL CUR (delete current),
DEL ALL (delete all), SAVE, NAME/TEL
3.1 ANSWER
0123456789
LINE XXX 00:00:03 TRANS CONF MUTE →
Press [ANSWER] to call the displayed number. 0123456789
03/10 16:02 CNT :01 BACK SELECT > ANSWER
3.2 DEL CUR
STATION 100 (T) FEB 01 04 05:34 pm PICKUP CONF REDIAL
Press [DEL CUR] to erase current number. 0123456789
3.3 DEL ALL
ALL CLI DELETE Press HOLD Key
BACK SELECT > DEL ALL
Press the [HOLD] button to confirm ‘delete all’ function. All numbers are erased.
0123456789
14/07 16:02 CNT :01 BACK SELECT > DEL ALL
3.4 SAVE
ENTER SPD BIN NO (000) CLI MSG USED PAUSE FLASH D-TONE
3.5 NAME/TEL
EDWARD
03/10 16:02 CNT :01 BACK SELECT > NAME/TEL
Press [HOLD] or button, speed dial is registered.
0123456789
03/10 16:02 CNT :01 BACK SELECT > NAME/TEL
※ See the page 48.
To save CLI, press [SAVE] button. 0123456789
03/10 16:02 CNT :01 BACK SELECT > SAVE
OR if a name is displayed, to check the associated number, press the [NAME/TEL] button.
NOTE NOTE
Return to the previous BACK
Press [SELECT] until [DEL ALL] appears in display. Press [DEL ALL] to initiate ‘delete all’ function.
Press the [Menu] button.
Press the [Navigation] button.
Press the [Navigation] button.
1
Press the [Navigation] button. Press the [Navigation] button.
2
3
4
Press the [Navigation] button.
5 6 3.SPEED PROGRAM 4. MOBILE EXTENSION PGM OK 5.CONFERENCE ROOM PGM
6. HOT DESK PROGRAM OK 3. SPEED PROGRAM 4.MOBILE EXTENSION PGM OK 1. BASIC PROGRAM 2.ADVANCED PROGRAM OK 5. CONFERENCE ROMM PGM
6.HOT DESK PROGRAM ∧ OK
1.BASIC PROGRAM
1. BASIC PROGRAM
Press [OK] or button. Press the [MENU] button.
1.1 STATION NAME PROGRAM
ENTER NAME ( )
BACK OK
Enter the name.
※ For detailed information about entering name, see the page 58.
1
1.BASIC PROGRAM
2. ADVANCED PROGRAM OK
1
1.STATION NAME PROGRAM
2. RING PROGRAM
BACK OK
1.2 RING PROGRAM
Press [Navigation] button.
Press [Navigation] button.
Press [Navigation] button.
Press [Navigation] button.
1 3 1.ICM RING 2. ICM MELODY BACK OK 2 1. ICM RING 2. ICM MELODY BACK OK 3.CO RING 4. CO MELODY ∧ BACK OK 4 3. CO RING 4.CO MELODY ∧ BACK OK 1
1. STATION NAME PROGRAM
2. RING PROGRAM
BACK OK
RING TYPE : 01 (01-15) SELECT BY [NEXT]
BACK NEXT OK
Step using [NEXT] or button to select the ring. 1.2.1 Select Ring
RING TYPE : 02 (01-15) SELECT BY [NEXT]
BACK NEXT OK
Press [OK] or button. The selected ring type is saved.
※ Use same procedure to select CO Ring type. 1 1.ICM RING 2. ICM MELODY BACK OK 1.2.2 Select Melody 1 1. ICM RING 2.ICM MELODY BACK OK CATEGORY SEARCH ← Pleasure (10) → EXIT OK
Use button to select category.
Pleasure(10)
← [01] Cancan →
BACK EXIT OK Press the [OK] or button and then the melody is changed.
※ Press the [EXIT] button to cancel.
※ Use same procedure to select CO Melody.
Note : To set the melody, MFU and MU board is required.
Use button to select the desired melody. Press [OK] or button.
1.3 MODE(H/T/P) PROGRAM
TONE MODE SELECT BY [NEXT]
BACK NEXT OK
Press [NEXT] or button to select the mode.
PRIVATE MODE SELECT BY [NEXT]
BACK NEXT OK
Press [OK] or button. ※ There are three types as follows;
-. HANDSFREE MODE -. TONE MODE -. PRIVATE MODE
You will hear three bursts of tone and an announcement. Reply hands-free or lift handset for privacy. The calling party can hear any conversation in progress.
You will hear repeated bursts of intercom ring tone and the HOLD button slow flashes. Lift the handset or press the SPEAKER button to answer.
You will hear three bursts of tone and one-way announcement. NOTE HANDSFREE TONE PRIVATE STATION 100 (P) FEB 01 04 05:34 pm PICKUP CONF REDIAL
The selected mode is saved. 13.MODE(H/T/P) PROGRAM
4. PASSWORD PROGRAM BACK OK
1.4 PASSWORD PROGRAM
Use [Next] or button to select the password register.
Then press [OK] or button.
ENTER PASSWORD : BACK
Enter password. (3~11 digits) e.g.) 55555
PRESS OK KEY
BACK OK
Press [OK] or button. > PASSWORD REGISTER SELECT BY [NEXT] BACK NEXT OK 1.4.1 PASSWORD REGISTER 1 3. MODE(H/T/P) PROGRAM 4.PASSWORD PROGRAM BACK OK
Use [Next] or button to select the password change.
Then press [OK] or button.
ENTER CURRENT PASSWORD BACK
Enter the current password. (3~11 digits) e.g.) 55555
ENTER PASSWORD : BACK
Enter the new password. (3~11 digits) e.g.) 33333
1.4.2 PASSWORD CHANGE
> PASSWORD CHANGE SELECT BY [NEXT]
BACK NEXT OK
Press [OK] or button. PRESS OK KEY
1.5 LANGUAGE PROGRAM
Press [OK] or button. > KOREAN LCD LANGUAGE BACK NEXT OK > ENGLISH LCD LANGUAGE BACK NEXT OK
Use [NEXT] or button to select language.
1.6 ENBLOCK MODE PROGRAM
Press [OK] or button. ENBLOCK MODE > ON BACK NEXT OK ENBLOCK MODE > OFF BACK NEXT OK
Use [NEXT] or button to select ON/OFF. 1 5.LANGUAGE PROGRAM 6. ENBLOCK MODE ∧ BACK OK 1 5. LANGUAGE PROGRAM 6.ENBLOCK MODE ∧ BACK OK
Press [OK] or button.
2. ADVANCED PROGRAM
Press [MENU] button.
2.1 WAKE UP PROGRAM
ENTER YOUR WAKEUP TIME HH:MM 10:10 am BACK ERASE OK
Enter the time and select single time or every day. -S:Single (once only - Default)
-C:Every Day ( # )
* Set the time : 24 hr format • e.g. :7am = 07:00
:7pm = 19:00
STATION 100 (T) FEB 01 04 *10:34 pm PICKUP CONF REDIAL
Flashing [*] preceding time indicates alarm set. 2.1.1 Setting 1 1. BASIC PROGRAM 2.ADVANCED PROGRAM OK 1 1.WAKE UP PROGRAM 2. PRESELECTED MSG PGM BACK OK WAKEUP RING FEB 01 05 *07:00 am
The alarm will sound at the pre-set time. ENTER YOUR WAKEUP TIME
07:00-C 10:00am BACK ERASE OK
Press [OK] or button.
Press [OK] or button.
2.1.2 Canceling
ENTER YOUR WAKEUP TIME 07 : 00-S *10:34 pm BACK ERASE OK
Press [ERASE] button.
Press [OK] or button. ERASED WAKEUP TIME
07 : 00-S *10:34 pm BACK ERASE OK 1 1.WAKE UP PROGRAM 2. PRESELECTED MSG PGM BACK OK
2.2 PRESELECTED MSG PGM
SELECT BY UP/DOWN KEY BACK
Use or button to select the desired type.
Press [OK] or button.
Enter the time (24 hr format) e.g.) 07:30 am Î enter 0730.
07:30 pm Î enter 1930. OUT OF OFFICE
RETURN AT TIME XX:XX BACK OK
Press [OK] or button. ENTER TIME HH:MM BACK ENTER TIME 07:30 PRESS OK KEY BACK P.DVU OK
The selected message is displayed. OUT OF OFFICE
RETURN AT TIME 07:30 PICKUP CONF REDIAL 1
1. WAKE UP PROGRAM
2.PRESELECTED MSG PGM
BACK OK 2.2.1 Select the MSG PGM
2.2 PRESELECTED MSG PGM
THE PRESELECTED MESSAGE TYPE 0 0 USER CUSTOM MSG 00 0 1 LUNCH RETURN AT XX:XX
0 2 ON VACATION / RETURN AT DATE XX:XX 0 3 OUT OF OFFICE/ RERURN AT TIME XX:XX 0 4 OUT OF OFFICE/ RETURN AT DATE XX:XX 0 5 OUT OF OFFICE/ RETURN UNKNOWN 0 6 CALL TO (PHONE NO : Max. 17 digits) 0 7 IN OFFICE STA ***
0 8 IN A MEETING / RETURN AT TIME XX:XX 0 9 AT HOME 1 0 AT BRANCH OFFICE 2.2.2 Canceling / Changing OUT OF OFFICE RETURN AT TIME XX:XX BACK ERASE OK
SELECT BY UP/DOWN KEY BACK
[Message select mode]
Press [ERASE] button to cancel the pre-selected message and return to the[Message select mode]. ※ Press [BACK] button to return to the previous LCD
screen.
※ Press [OK] button to return to the [enter time mode]. 1. WAKE UP PROGRAM
2. PRESELECTED MSG PGM
BACK OK
2.3 STATION COS PROGRAM
> COS DOWN MODE SELECT BY [NEXT]
BACK NEXT OK
※ To activate STA COS (Station Class Of Service), password is required..
※ There are three types as follows; -. COS DOWN MODE
-. RESTORE COS MODE -. WALKING COS MODE 2.3.1 COS DOWN MODE
1
3.STATION COS PROGRAM
4. SPK/HEADSET PROGRAM BACK OK
Press [OK] or button.
> COS DOWN MODE ICM ONLY MODE
BACK OK
Press [OK] or button and then the mode is changed.
Use [NEXT] or button to select the COS DOWN MODE.
2.3.2 RESTORING COS MODE
Use [NEXT] or button to select the RESTORE COS MODE.
ENTER CURRENT PASSWORD BACK
Enter the password (3~11 digits) to change RESTORE COS MODE.
Press [OK] or button. ORIGINAL COS RESTORED
PRESS OK KEY
BACK OK > RESTORE COS MODE
SELECT BY [NEXT]
BACK NEXT OK
2.3.3 WALKING COS MODE
Use [NEXT] or button to select the WALKING COS MODE.
ENTER COS OVERRIDE CODE BACK
Enter the COS Override code (Password - 3~11 digits) e.g.- 12345
> WALKING COS MODE SELECT BY [NEXT]
BACK NEXT OK
ENTER COS OVERRIDE CODE PRESS OK KEY
BACK OK
2.4 SPK/HEADSET PROGRAM
SPEAKER MODE SELECT BY [NEXT]
BACK NEXT OK
Use [NEXT] or button to toggle the mode.
SPEAKER MODE SELECT BY [NEXT]
BACK NEXT OK
Press [OK] or button to save selected mode. ※ There are two types as follows;
-. SPEAKER MODE -. HEADSET MODE 1
3. STATION COS PROGRAM
4.SPK/HEADSET PROGRAM
BACK OK
2.5 EAR MIC PROGRAM
Press [OK] or button. EAR-MIC HEADSET > OFF BACK NEXT OK EAR-MIC HEADSET > ON BACK NEXT OK
Use [NEXT] or button to select the ON/OFF. 15.EAR MIC PROGRAM
∧ BACK OK
3. SPEED PROGRAM
Press [MENU] button.
ENTER SPD BIN NO(000) BACK
Enter the speed bin number. e.g.)007
>
ENTER CO-BTN/DIGIT (007) BACK DELETE
Then press [OK] or button. >123456789
SPEED 007
BACK OK
Enter the phone number. e.g.)123456789
Press [DELETE] button to delete speed bin number.
1
3.SPEED PROGRAM
4. MOBILE EXTENSION PGM OK
Enter the name.
※ See page 58for details. >
ENTER NAME (SPD 007) BACK OK
Then press [OK] or button. > ABC
ENTER NAME (SPD 007) BACK OK
4. MOBILE EXTENSION PGM
Press [MENU] button.
1
3. SPEED PROGRAM
4.MOBILE EXTENSION PGM OK
Press [OK] or button.
4.1 MOBILE-EXT. NUM PGM
4.2 MOBILE-EXT ENALBLE
> 123456789
MOBILE EXT TEL NO.
BACK OK
Enter the mobile number. e.g.)2222222
MOBILE EXT. USAGE > OFF
BACK NEXT OK
Press [OK] or button.
Use [NEXT] or button to toggle ON/OFF.
MOBILE EXT. USAGE > ON
BACK NEXT OK
Press [OK] or button.
Press [OK] or button.
1. MOBILE-EXT. NUM PGM 2. MOBILE-EXT. ENABLE ∧ BACK OK 1. MOBILE-EXT. NUM PGM 2. MOBILE-EXT. ENABLE ∧ BACK OK
＊ Refer to ipLDK system & ipLDK system programming manual.
> 2222222
MOBILE EXT TEL NO.
BACK OK
5.1 CREATE CONF ROOM
DIAL NO(1-9) AND PASSWD BACK OK
5.2 DELETE CONF ROOM
Enter conference room number and password.
e.g.) 9 + 12345
Press [OK] or button. PRESS OK KEY
BACK OK
DIAL NO(1-9) AND PASSWD BACK OK
Enter conference room number and password.
e.g.) 9 + 12345
Press [OK] or button. PRESS OK KEY
1. CREATE CONF ROOM
2. DELETE CONF ROOM ∧ BACK OK
1.CREATE CONF ROOM
2. DELETE CONF ROOM ∧ BACK OK
Press [OK] or button.
Press [OK] or button.
5. CONFERENCE ROOM PGM
Press [MENU] button.
1
5.CONFERENCE ROOM PGM
6. HOT DESK PROGRAM ∧ OK
Press [OK] or button.
Menu
6. HOT DESK PROGRAM
Press [MENU] button.
6.1 HOT DESK LOG IN
1
5. CONFERENCE ROOM PGM 6. HOT DESK PROGRAM ∧
OK
Enter password.(3~11 digits) and ‘#’ e.g.)55555
DUMMY STATION 100 ENTER PASSWORD :
STATION 217 (T) 06 SEP 04 04:00pm PICKUP CONF REDIAL 1. HOT DESK LOG IN
2. HOT DESK LOG OUT ∧ BACK OK
＊ Refer to ipLDK system & ipLDK system programming manual.
Press [OK] or button.
Press [OK] or button.
6.2 HOT DESK LOG OUT
Use button or button to select forward type and then Press [OK] or button. AGENT LOGOUT WITH
NO FORWARD SET ? 1. HOT DESK LOG IN
2. HOT DESK LOG OUT ∧ BACK OK
DUMMY STATION 222 09 SEP 04 10:43am PICKUP CONF REDIAL
Press [OK] or button.
1. Dial By ICM Name
[PHONE BOOK] and [DIAL: BY NAME] are the same feature.
1. DIAL BY ICM NAME 2. DIAL BY STA SPD NAME
OK
3. DIAL BY SYS SPD NAME ∧ OK
NOTE
Return to the previous BACK
Use the button or button to select the desired number and press the [SEND] button to call.
1
1.DIAL BY ICM NAME 2. DIAL BY STA SPD NAME
Press [OK] or button.
2. Dial By STA SPD Name
2
1. DIAL BY ICM NAME
2.DIAL BY STA SPD NAME OK
Press [OK] or button.
3. Dial By SYS SPD Name
1. TEAM1(2000) 2. TEAM2(2001)
BACK NAME/TEL SEND
To check the number of the selected name, press the [NAME/TEL] button.
Use the button or button to select the desired number and press [SEND] button to call.
123456789
LINE 008 00:00:03 TRANS CONF MUTE →
Talk. 3
3.DIAL BY SYS SPD NAME ∧ OK 123456789
LINE 008 00:00:03 TRANS CONF MUTE →
Talk.
To check the number of the selected name, press the [NAME/TEL] button.
Use the button or button to select the desired number and press [SEND] button to call. 1:ABC(001)
2:DEF(002)
1. SET OR CHANGE THE DATE/TIME
2. CHANGE DATE FORMAT
3. ATTENDANT INTRUSION
The Attendant can intrude into a conversation between an extension and an outside line and create a 3-way conversation. To use attendant intrusion, Intrusion button is required to use intrusion and attendant intrusion feature must be enabled in Admin Program.
Refer to the Programming manual for ARIA SOHO.
Flexible button for intrusion feature
:• Press the [TRANS/PGM] button • Dial “0 4 1”
• Enter Date as MMDDYY( MM: month, DD:day, YY:year ) • Press the [HOLD/SAVE] button
• Enter the Time in 24 hour format(1630 for 4.30pm) • Press the [HOLD/SAVE] button
• Press the [TRANS/PGM] button
• Press the flexible button to be programmed • Press the [TRANS/PGM] button
• Dial “8 6”
• Press the [HOLD/SAVE] button • Press the [TRANS/PGM] button
• Dial “0 4 4” to toggle the formats between DDMMYY and MMDDYY
To intrude into busy line,
• Press the CO button of the outside line (Intrusion warning tone will be provided to the busy extension and a 3-way conference call is established)
To intrude into busy extension,
Attendant Function
4. OVERRIDING AN EXTENSION IN DND MODE
5. SETTING DAY / NIGHT/ WEEKEND MODE
When a CO call comes in the system, the destination of CO call can be changed according to ring mode.There are 5 ring modes – Day mode/Night mode/Weekend mode/On-demand mode/Automatic Ring mode. The destination of CO call can be set differently at each ring mode with ADMIN Program.
( Refer to ARIA SOHO Programming manual for detail )
To activate Day / On-Demand / Night / Weekend / Auto mode manually. • Press the [DND/FWD] button at the Attendant Station
Attendant can override station in DND. • Call a station in DND(DND tone is heard). • Dial “*” to override the extension
The station in DND will receive ring.
• Select the desired mode by dialing digit 1-5
( 1: DAY, 2: NIGHT, 3: ON-DEMAND, 4: WEEKEND, 5: AUTO ) • Press the [HOLD/SAVE] button
6. STORING SYSTEM DIALS
7. CHANGING TEMPORARY COS (CLASS OF SERVICE)
1. To activate temporary COS of a station to restrict CO access.
• Press the [TRANS/PGM] button and dial “022” • Enter the station range to be restored.
(e.g. 110113 for station 110 – 113) • Press the “HOLD/SAVE” button • Press the [TRANS/PGM] button. • Press the [SPEED] button. ENTER SPEED BIN NO(2000)
PAUSE FLASH D-TONE
• Dial the Speed Bin Number(2000-2499)
• Dial the phone number to be stored. • Press [HOLD/SAVE] button to save. ENTER CO-BTN/DIGIT(2000)
PAUSE FLASH D-TONE
• Enter name. (Refer to Character table name in page 58 )
• Press the [HOLD/SAVE] button to save. 1234567
SPEED 2000
PAUSE FLASH D-TONE JOHN
ENTER NAME (SPD 2000) PAUSE FLASH D-TONE
2. To restore the temporary COS
• Press the [TRANS/PG] button and Dial “021”. • Enter the station range to be changed.
(e.g. 110113 for station 110 – 113) • Press the “HOLD/SAVE” button ICM ONLY MODE
STATION RANGE ?
Intercom – describes internal calls within the telephone system Central Office Line – also known as a trunk line, exchange line or outside line
A commonly used number stored in a speed bin for easy access Do Not Disturb – the station is blocked to all incoming calls Forward – calls can be sent to another location such a voicemail or another station
Direct Dial Inwards or Direct Inwards Dialing – ISDN lines can be provided with multiple telephone numbers which are each routed to individual stations or Hunt Groups
Digital Key Telephone Unit – an LG-Nortel digital telephone Single Line Telephone – an analogue telephone
Integrated Services Digital Network. Digital CO lines that come in multiples of 2 channels or more
Voice Message Interface Board – LG-Nortel integral Voice Processing card