• No results found

Optimization of melting and solidification processes of PCM:Application to integrated collector storage solar water heaters (ICSSWH)

N/A
N/A
Protected

Academic year: 2020

Share "Optimization of melting and solidification processes of PCM:Application to integrated collector storage solar water heaters (ICSSWH)"

Copied!
31
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Fig. 2: Variation of the melt front with time (predicted and experimental values)
Fig. 3: Hourly climatic data used in the simulation process
Fig. 4: Absorber temperature versus the time
Fig. 5: Variation outlet water temperature for C0 and C1 configurations
+7

References

Related documents

Figure 1 shows time series of global monthly mean concentrations, in the 1000–500 hPa layer, of the 12 prognostic aerosol bins over a period common to the MACC Reanalysis and

• Clear standards need to be set for trainers in the construction and road construction industries. They should have a strong technical background with 10 years of

In this paper with the reference of NASA’s MARS Curiosity Rover, this project is meant for a low cost, lightweight and small size unmanned ground vehicle (UGV) which is controlled

Keywords— Agent based modeling and simulation (ABMS), Routine activity theory (RAT), NetLogo, Q – learning, police patrolling strategies, crime simulation..

While responses to A fibre input are enhanced in immature spinal cord, long latency C fibre evoked spike responses are not evoked in dorsal hom cells before the end of the

ƒ Emergency care access to patient medical info on the card. ƒ Enhanced

Salminus franciscanus can be diagnosed from its congeners by the combination of the presence of an enlarged second tooth in the outer series of the dentary considerably larger than

Consistent with the VAR evidence, the model predicts a joint decline in house prices, mobility, output, vacancies and the unemployment out‡ow hazard, and an increase in the