Schedule of Accreditation
issued by
United Kingdom Accreditation Service
21 - 47 High Street, Feltham, Middlesex, TW13 4UN, UK
0001
Type A Inspection Body
Accredited to ISO/IEC 17020:2012
Royal & SunAlliance Insurance PlcTrading as:- RSA Engineering and Vulcan Inspection Services
Issue No: 017 Issue date: 21 September 2015
17 York Street Manchester M2 3RS
Contact: Mr Richard Green Tel: +44 (0)161 235 3069 Fax: +44 (0)161 235 3702
E-Mail: richard.green@uk.rsagroup.com Website: www.rsagroup.com
Inspection performed at/from the above address only
DETAIL OF ACCREDITATION
Field of Inspection Type and Range of Inspection Methods and Procedures Pressure Equipment Design Verification, New
Construction and Inspection
RSA Procedure 02-140-P31 and 05-120-P38 referencing published national/ international standards for pressure equipment
Welding Procedures and Welder Approvals
Verification and Approval RSA Procedure 02-140-P22
Major, Intermediate and Minor Pressure Systems
Certification of written schemes of examination and in-service inspection
Pressure System Safety
Regulations 2000 SI 2000, No 128 RSA Procedure 05-20-P01 and 05-10-P16
Power Presses In-service inspection Provision and Use of Work
Regulations 1998 - SI.1998 No 2306, Part IV (PUWER 98) RSA Procedure 05-54-R027.1 to R043.4
Lifting Equipment In-service inspection Lifting Operations and Lifting Equipment Regulations 1998 (LOLER 98), SI.1998 No 2307 RSA Procedure 05-50-R002.1 to 05-50-R040.2
Local Exhaust Ventilation Plant (LEV)
Initial Appraisal and In-service Inspection/Thorough Examination and Test of Engineering Controls
Control of Substances Hazardous to Health Regulations 2002 Control of Substances Hazardous to Health Regulations (N.I.) 2003 RSA Procedure 05-53-R017.1 to 05-53-R017.4
END
0001 Type A Inspection Body
Accredited to ISO/IEC 17020:2012
S c h e d u l e o f Ac c r e d i t a t i o n
issued by
United Kingdom Ac c reditation Service
2 1 - 4 7 H i g h S t r e e t , F e l t h a m , M i d d l e s e x , T W 1 3 4 U N , U K
Royal & SunAlliance Insurance Plc Trading as:- RSA Engineering and Vulcan Inspection Services
Issue No: 017 Issue date: 21 September 2015
Inspection performed at/from main address only
Directive/Regulation Conformity Assessment procedure/Module/Article and / or Inspection
Category of products or individual products
Methods / Procedures Essential requirements:
Product specification/
Properties / Standards
The Carriage of Dangerous Goods & Use of Transportable Pressure Equipment Regulations 2009 (as amended) AND
The Carriage of Dangerous Goods & Use of Transportable Pressure Equipment (Northern Ireland) Regulations 2010 (as amended).
PART 3 of the Approved Derogations & Transitional Provisions.
Periodic inspection &
Intermediate inspection.
Exceptional checks: 4.5 – 4.5.7
UK road, and rail, tanks*
constructed before 10/05/04.
Metallic tanks.
Vacuum-operated waste tanks.
for substances of Class(s) 2, 3, 4, 5, 6, 8 & 9
For substances of Class 3
VCA Procedures for Inspection & Testing of UK Tanks
RSA procedures 02-140- P34 and P35
Special case procedure 02- 140-I140 for hydraulic pressure testing with alternative fluids with a flashpoint >61 oC using:
UN1202 UN1223 MOD Tanks for Class 3
substances
MOD Test Fluids
F-44: Turbine Fuel, Aviation F-54: Diesel Fuel
F-76: Fuel Naval Distillate UK Road tanks for LPG *
constructed in GB after 09/05/2004or in NI after 31/07/06 to EN 12493, Annex C.
EN 12972:2007
RSA procedures 02-140- P34 and P35
Type Approval
Supervision of construction Initial inspection and test
UK Road tanks for LPG * constructed in GB after 9th May 2004 or in NI after 31/07/06to EN 12493, Annex C.
EN 12972:2007
RSA procedures 02-140- P34 and P35
0001 Type A Inspection Body
Accredited to ISO/IEC 17020:2012
S c h e d u l e o f Ac c r e d i t a t i o n
issued by
United Kingdom Ac c reditation Service
2 1 - 4 7 H i g h S t r e e t , F e l t h a m , M i d d l e s e x , T W 1 3 4 U N , U K
Royal & SunAlliance Insurance Plc Trading as:- RSA Engineering and Vulcan Inspection Services
Issue No: 017 Issue date: 21 September 2015
Inspection performed at/from main address only
Directive/Regulation Conformity Assessment procedure/Module/Article and / or Inspection
Category of products or individual products
Methods / Procedures Essential requirements:
Product specification/
Properties / Standards
RID, ADR Chapter 6.8 Chapter 6.10
Periodic inspection &
Intermediate inspection.
Exceptional checks: 4.5 – 4.5.7
Type Approval
Initial inspection and test
Tanks with shells of Metallic Materials*
(chapter 6.8)
Fixed tanks (road tanks) Tank wagons (rail tanks) Demountable tanks Tank containers Tank swap bodies Battery vehicles (road) Battery wagons (rail) MEGCs
Vacuum Operated Waste Tanks*
(chapter 6.10)
for substances of Class(s) 3, 4, 5, 6, 8 & 9
For substances of Class 3
MOD Tanks for Class 3 substances
EN 12972:2007
RSA procedures 02-140- P34 and P35
EN13530: 2002 EN14025: 2008
Special case procedure 02- 140-I140 for hydraulic pressure testing with alternative fluids with a flashpoint >61 oC using:
UN1202 UN1223
MOD Test Fluids
F-44: Turbine Fuel, Aviation F-54: Diesel Fuel
F-76: Fuel Naval Distillate
0001 Type A Inspection Body
Accredited to ISO/IEC 17020:2012
S c h e d u l e o f Ac c r e d i t a t i o n
issued by
United Kingdom Ac c reditation Service
2 1 - 4 7 H i g h S t r e e t , F e l t h a m , M i d d l e s e x , T W 1 3 4 U N , U K
Royal & SunAlliance Insurance Plc Trading as:- RSA Engineering and Vulcan Inspection Services
Issue No: 017 Issue date: 21 September 2015
Inspection performed at/from main address only
Directive/Regulation Conformity Assessment procedure/Module/Article and / or Inspection
Category of products or individual products
Methods / Procedures Essential requirements:
Product specification/
Properties / Standards
The Transportable Pressure Equipment Directive 2010/35/EU Article 12 of the Directive 2010/35/EU +1.8.7 of the Annexes 2008/68/EC
Periodic inspection &
Intermediate inspection.
Exceptional checks: 4.5 – 4.5.7
Conformity assessment Conformity reassessment Supervision of construction Initial inspection and test
Tanks with shells of Metallic Materials*
(chapter 6.8)
Fixed tanks (road tanks) Tank wagons (rail tanks) Demountable tanks Tank containers Tank swap bodies Battery vehicles (road) Battery wagons (rail) MEGCs
for substances of Class 2
EN 12972:2007
RSA procedures 02-140- P34 and P35
EN13530: 2002 EN14025: 2008
PD5500: 2009 +A2: 2010 ASME VIII: Div 1
ASME VIII: Div 2
ADR, RID* (Chapter 6.2) Conformity assessment including:
Type Approval
Supervision of manufacture Initial inspection and test Periodic inspection,
intermediate inspection, and exceptional checks
Cryogenic vessels – Transportable vacuum insulated, of not more than 1000 litres volume.
EN1251-2:2000
RSA procedures 02-140- P35 and 36
The Carriage of Dangerous Goods & Use of Transportable Pressure Equipment Regulations 2009 (as amended) AND
The Carriage of Dangerous Goods & Use of Transportable Pressure Equipment (Northern Ireland) Regulations 2010 (as amended)
The Merchant Shipping (Dangerous Goods and marine Pollutants) regulations 1997
ADR, RID* & IMDG Code Chapter 6.2
Conformity assessment including:
Type Approval
Supervision of manufacture Initial inspection and test Periodic inspection,
intermediate inspection, and exceptional checks
Cryogenic vessels – Transportable vacuum insulated, of not more than 1000 litres volume.
EN1251-2:2000
RSA procedures 02-140- P35 and 36
0001 Type A Inspection Body
Accredited to ISO/IEC 17020:2012
S c h e d u l e o f Ac c r e d i t a t i o n
issued by
United Kingdom Ac c reditation Service
2 1 - 4 7 H i g h S t r e e t , F e l t h a m , M i d d l e s e x , T W 1 3 4 U N , U K
Royal & SunAlliance Insurance Plc Trading as:- RSA Engineering and Vulcan Inspection Services
Issue No: 017 Issue date: 21 September 2015
Inspection performed at/from main address only
Directive/Regulation Conformity Assessment procedure/Module/Article and / or Inspection
Category of products or individual products
Methods / Procedures Essential requirements:
Product specification/
Properties / Standards
RID, ADR & IMDG Code, Chapter 6.7
Periodic inspection &
Intermediate inspections.
Exceptional checks: 4.5 – 4.5.7
Type Approval
Supervision of construction Initial inspection and test
Portable Tanks* for substances of Class(s) 2, 3, 4, 5, 6, 8 & 9
EN 12972:2007 IMO Res A.581 (14) RSA procedures 02-140- P34 and P35
EN13530: 2002 EN14025: 2008
PD5500: 2009 +A2: 2010 ASME VIII: Div 1
ASME VIII: Div 2
IMDG Code, Chapter 6.7 Type Approval
Supervision of construction Initial inspection and test
Offshore tank-containers* MSC/Circ.860 EN 12079-1: 2006 RSA procedures 02-140- P34 and P35
The Merchant Shipping (Dangerous Goods and marine Pollutants) regulations 1997
Periodic inspection &
Intermediate inspections.
Exceptional checks
IMO Type 1,2,5 & 7 Portable tanks*
IMO Type 4,6 & 8 Road tank vehicles*
DSC/Circ.12 IMO Res A.581 (14)
Note: The inspection of items marked thus * or ** are subject to legislative requirements including the appointment of ‘persons’ to carry out inspections. Reference should be made to the VCA Dangerous Goods Office for information on this and listings of bodies recognised under UK legislation.
END
0001 Type A Inspection Body
Accredited to ISO/IEC 17020:2012
S c h e d u l e o f Ac c r e d i t a t i o n
issued by
United Kingdom Ac c reditation Service
2 1 - 4 7 H i g h S t r e e t , F e l t h a m , M i d d l e s e x , T W 1 3 4 U N , U K
Royal & SunAlliance Insurance Plc Trading as:- RSA Engineering and Vulcan Inspection Services
Issue No: 017 Issue date: 21 September 2015
Inspection performed at/from main address only
Accreditation for the purpose of Notified Body Activity taking into account EA2/17 and relevant requirements of EN ISO/IEC 17021 & EN 45011
Directive/Regulation Conformity Assessment procedure/Module/Article
Category of products or individual products
Methods / Procedures Essential
requirements:
Product specification/
Properties / Standards
Pressure Equipment Directive 97/23/EC implemented by;
Pressure Equipment Regulations
1999 (SI 2001)
Directive: Article 10:Annex III Regulation: 12 - Schedule 4 Conformity Assessment Modules A1, B, B1, C1, D, D1, E, E1, F, G, H, H1
All descriptions of pressure equipment and assemblies covered by the Regulations.
RSA Procedures
Directive: Article 11
Regulation: 17 - Schedule 7
Issuing European Approval of Materials
RSA Procedures
Directive: Annex I – 3.1.2 Regulations: Schedule 2 – 3.1.2
Categories II III and IV Approval of permanent joining procedures and personnel
RSA Procedures
Directive: Annex I – 3.1.3
Regulations: Schedule 2 – 3.1.3 Categories III and IV Approval of personnel to carry out non-destructive test on permanent joints for pressure equipment
Inspection Body Procedures
Directive: Article 14 Regulation: 22 User Inspectorate Modules A1, C1, F, G
All descriptions of pressure equipment and assemblies covered by the Regulations.
Inspection Body Procedures
Simple Pressure Vessels Directive 2009/105/EC Implemented by
The Simple Pressure Vessels (Safety) Regulations 1991 (as amended)
EC type-examination Directive: Article 10 Regulation 11
EC declaration of conformity Directive: Articles 12, 13 and 14 Regulation 13
EC verification Directive: Article 11 Regulation 12
Simple Pressure Vessels manufactured in series
BS EN 286-1 1998+A2:2005
0001 Type A Inspection Body
Accredited to ISO/IEC 17020:2012
S c h e d u l e o f Ac c r e d i t a t i o n
issued by
United Kingdom Ac c reditation Service
2 1 - 4 7 H i g h S t r e e t , F e l t h a m , M i d d l e s e x , T W 1 3 4 U N , U K
Royal & SunAlliance Insurance Plc Trading as:- RSA Engineering and Vulcan Inspection Services
Issue No: 017 Issue date: 21 September 2015
Inspection performed at/from main address only
Accreditation for the purpose of Notified Body Activity taking into account EA2/17 and relevant requirements of EN ISO/IEC 17021 & EN 45011
Directive/Regulation Conformity Assessment procedure/Module/Article
Category of products or individual products
Methods / Procedures Essential
requirements:
Product specification/
Properties / Standards
Lifts Directive 95/16/EC
implemented by;
The Lifts Regulations 1997 (as amended)
Directive: Annex V B Regulation: Schedule 5 B EC Type-examination
Lifts RSA Procedures
Directive: Annex VI Regulation: Schedule 6 Final Inspection
Lifts RSA Procedures
Directive: Annex X Regulation: Schedule 9 Unit verification
Lifts RSA Procedures
Directive: Annex XIII Regulation: Schedule 12 Full quality assurance
Lifts RSA Procedures
Directive: Annex XIV Regulation: Schedule 13 Production quality assurance
Lifts RSA Procedures
Directive: Annex V A Regulation: Schedule 5 A EC Type-examination
Safety Components RSA Procedures
Directive: Annex IX Regulation: Schedule 8 Full quality assurance
Safety Components RSA Procedures
Directive: Annex VIII Regulation: Schedule 7 Production quality assurance
Safety Components RSA Procedures
0001 Type A Inspection Body
Accredited to ISO/IEC 17020:2012
S c h e d u l e o f Ac c r e d i t a t i o n
issued by
United Kingdom Ac c reditation Service
2 1 - 4 7 H i g h S t r e e t , F e l t h a m , M i d d l e s e x , T W 1 3 4 U N , U K
Royal & SunAlliance Insurance Plc Trading as:- RSA Engineering and Vulcan Inspection Services
Issue No: 017 Issue date: 21 September 2015
Inspection performed at/from main address only
Accreditation for the purpose of Notified Body Activity taking into account EA2/17 and relevant requirements of EN ISO/IEC 17021 & EN 45011
Directive/Regulation Conformity Assessment procedure/Module/Article
Category of products or individual products
Methods / Procedures Essential
requirements:
Product specification/
Properties / Standards
Machinery Directive 2006/42/EC
implemented by:
The Supply of Machinery(Safety) Regulation 2008 (SI 1597)
Directive: Article 12 (3)b and (4)a :Annex IX
Regulation: Schedule 2 Part 9 EC Type Examination
Annex IV item 17 Part 4 Item 17
RSA Procedures
Directive: Article 12 (3)c and (4)b :Annex X
Regulation: Schedule 2 Part 10 Full Quality Assurance
Annex IV item 17 Part 4 Item 17
RSA Procedures
Note: The inspection of items above are subject to legislative requirements including the appointment of bodies’ to carry out conformity assessment. Reference should be made to the relevant Government Departments BIS for information on this and listings of bodies recognised under UK legislation
END