C
ONTENTS
ROLL-IT-UP1 12-13 ROLL-IT-UP3 14-15 ROLL-IT-UP4 16-17
FABRICWALL 26-27 POPUP ELITE 32-33
IMAGESTAND2 20-21 ADAPT 22-23
IMAGESTAND1 18-19
Fabric & Pop-Up Displays
Podiums & Demo Stands
QUIKFRAME 44-47 INFRAME 48-49 EXSTREAM 50-51
Frames & Hanging Systems
PODIUMS 40-41
ROUNDUP 34-37 ROUNDUP LITE 38-39
FABRICOUNTER 28-29 STRETCHWALL 30-31
ADSTAND 6-7 ADBOX 8-11
car SUV cube van vehicle requireddepends on size
TRANSPORT
L
EGEND
STRETCHBANNER 24-25
DEMOSTAND 42-43
Promotional Displays
Retractable Banner Stands
tool-free requires tools estimated time depends on configuration
ASSEMBLY ASSEMBLY TIME
sec
30
SUPREME 60-63
HINGECOUNTER 58-59
TRANSPORTCASE 72 SPOTLIGHTS 74
POSTERSTAND1 66 POSTERSTAND2 67
INFOSTAND 64-65
Cases
Modular Aluminum Display Systems
Customized Solutions
20/20 78
HINGELINE 75 A-LINE 76-77
SOFTCASE 73
TRIMLITE 52-53 LIGHTBOX 54-55
PLENTYWALL 68-70
OUTDOOR DISPLAYS 79
Light Boxes
Counter
Floor Stands
Table Top & Floor Screens
TABLETOP & FLOOR SCREENS 56-57
Modular Exhibits
MONITORSTAND 71
Spotlights
EXHIBIT / SHOWCASE / KIOSK / STORE FIXTURE / INFOCENTER / A-LINE / 20/20 80-82
Outdoor Displays
See also FabriCounter(pg. 28-29)
See also FabriCounter as Table Top Display (pg. 28-29)
AdStand is a unique strategic tool for communication
and campaign planning. It has evolved from our
“AdBox
®” product and was developed to be printed
via various methods in any quantity. And, the sturdy
base means that it will hold up to in-store use.
AdStand comes in a flat package for optimized
distribution. It’s lightweight and easy to set up.
The double-sided exposure and eye-level height give
a maximum impression. The elegant ellipse-shaped
graphic AdSleeve brings you a new look. Keep the
AdBox and base, only replace the AdSleeve and you
have a new display. Choose an oval-shaped base or
a round one to best fit your needs.
As a floor-standing or a counter-top display, AdStand
always makes your message stand out.
sec
30
A
D
S
TAND
TM
SPECIFICATIONS
6/7
A
D
S
T
AND
PR OMO TIONAL DISPLA Y S 45540 45545 45550 45552 455352 STANDARD SIZES: OVAL BASE:
24" L x 14" W x 0.5" H (61 cm L x 35.6 cm W x 1.3 cm H) ROUND BASE: Diam. 22" (56 cm), 7/8" (2.2 cm) H 2 AdBoxes 1 AdBox AdSleeve AdBox middle connector hinged base connector base 19 11/16" (50 cm) 19 11/16" (50 cm) 70" (177.8 cm) 34 7/8" (88.6 cm)
One complete AdStand #45580 ships flat and fits in one carton box 36" x 21" x 2", 9 lbs.
OPTIONAL PARTS & ACCESSORIES
45540 Base, Oval, Black, 24" L x 14"W x 0.5"H (61 cm L x 35.6 cm W x 1.3 cm H)
45550 Hinged Base Connectors (for #45540 base), set of 2 45545 Base, Round, Black / White / Light Grey, diam. 22" (56 cm),
w. hinged base connectors attached
45552 Middle Connectors, set of 2 45535 AdBox, White
45576 AdSleeves, White, unglued, set of 5
Complete AdStand unit, double-sided, incl. black base, white AdBox(es), all connectors required and 1 AdSleeve.
45580 AdStand (printed display) w. 2 AdBoxes, 19 11/16" x 70''
(50 x 177.8 cm)
45585 AdStand (printed display) w. 1 AdBox, 19 11/16" x 34 7/8''
(50 x 88.6 cm)
45575 AdStand (blank displays), w. 2 AdBoxes & 1 White AdSleeve
(unglued), individually packed, carton of 10
Base material: Durable ABS
Graphic panel: Several options dependent on quantity Packaging: Carton box
A
D
B
OX
®
Many Configurations. One Powerful Display.
Make a mural. Suspend it. Stand it up.
Display your product. AdBox can handle it.
With brilliant graphics printed on high-grade
e-flute, AdBox is incredibly lightweight and
comes flat packed. It’s eco-friendly and
makes a big impact on your audience but
not the environment.
From the simplest ledge display to a full
mural backdrop, AdBox has your needs
covered. Not sure who’s watching your
back? With double-sided graphics, AdBox
makes good impressions all around.
AdBox is still probably the most innovative
POP display solution available.
SPECIFICATIONS
Insert the “feet” into the bottom of one of the boxes.
2 Insert double tab “feet”
into bottom of both boxes. 3
Insert rectangular connectors into the top of the standing box.
4 Insert 4-tab connectors
to attach boxes side by side.
5 Use top connectors to
keep boxes aligned at the top. 6 rectangular single connector C 4-tab connector D
T-shaped double “feet”
B
T-shaped single “feet”
A top connector E A B B C D E E
AdBox Wall (9 boxes)
Wall Triumph
Tower Star
CONFIGURATION SAMPLES:
Brochure Plexi Shelf V-shaped w. Shelves Y-Foot Plastic T-Foot
Marquee Mobile End Cap
Triangle
Accordian Pyramid Square
AdBox units will be litho-printed for large-run projects of over 200 displays. Digital printing will be used for small-run projects.
AdBox ships flat. 9 pcs. of flat boxes with all the feet and connectors fit in a 3.5" high carton box.
Fold the two flaps toward each other to interlock.
1
box with image
A
D C
C D D C
AdBox continues on next page. The configuration on the opposite side is shown below in parts to
describe the principle.
8/9
A
D
B
OX
PR OMO TIONAL DISPLA Y SA combination of high quality printed boxes along with a flexible connector system offers you a multitude of sizes and configurations – from towers to wall-size promotions. They're extremely lightweight, and set-up fast and easy, no tools required.
Wall (24 boxes)
A
D
B
OX
®
Wall (9 boxes) The most versatile display concept in
the world is also cost-effective, especially at high volumes. Major audience impact. Flexibility. Cost-effectiveness. It’s easy to start something big.
AdBox assembles in a snap, with no tools. It’s “goof-proof ”. And that’s smart.
Tower (3 boxes) w. brochure holder Staggered Wall Tower (2 boxes)
COMPLETE WALLS.
BIG OR SMALL.
A
D
B
OX
hanging Mobile hanging Marquee V-shaped w. shelves Table-top w. shelves PR OMO TIONAL DISPLA Y S10/11
Y-Foot Tower Tower (2 boxes) w. display shelf & wire feetTower (2 boxes) w. brochure holders Triangle
R
OLL
-
I
T
-
U
P
1
sec
30
The structured aluminum base of this
classic display acts as a protective housing
for your graphic panel so your image stays
in perfect condition. The swivel kickstand adds
stability but not bulk. All seven feet roll into
the base for a flat package that fits neatly
into a slim padded nylon carrying case.
Robust construction coupled with portability
helps this tool become the workhorse of
retractable displays.
OLL-IT
-UP
R
1
39263 39010 39021 39040R
OLL
-
I
T
-
U
P
3
sec
30
Swap and Roll.
Be a quick-change artist. This innovative
banner stand features interchangeable
graphic cassettes that let you swap
messages. Better yet, the new telescoping
pole works at various heights to allow
you to go from counter to floor display
in a snap. A custom trim to match your
corporate identity pulls it all together.
And it packs neatly into a smart, padded
nylon bag so you’re always ready to roll
with it.
Complete Roll-It-Up 3 unit with telescoping pole and snap-action top profile, incl. interchangeable cassette, clear plastic trim set and padded nylon carrying bag. (3-folded pole available upon request.) Graphic panel not included.
Standard graphic width (height is adjustable):
39515 Clear Anodized w. clear plastic trim, 33 1/2'' W (85 cm W)
39525 Clear Anodized w. clear plastic trim, 39 3/8'' W (100 cm W)
Weight: 13 lbs. (6 kg) or 15 lbs. (7 kg) Base material: Clear anodized aluminum Graphic panel: Several options available Packaging: Padded nylon bag
ROLL-IT
-UP 3
SPECIFICATIONS
R
OLL
-I
T
-U
P
3
39620 39601 39613 39490Adjustable visual graphic height:
The telescoping pole is adjustable in height. The visual graphic panel height can go from 62 5/8" (159 cm) up to 89" (226 cm).
The three marked heights on the telescoping pole show the three standard visual graphic panel heights.
The graphic panel rolls in and out of the unit.
Clear trim set is standard. Grey, blue, red & green are extra accessories. Interchangeable cassette 39040 RETRACT ABLE BANNER ST ANDS
14/15
OPTIONAL PARTS & ACCESSORIES
39601 Cassette incl. Snap-action Top Profile, 33 1/2" (85 cm)
39611 Cassette incl. Snap-action Top Profile, 39 3/8" (100 cm)
39613 Telescoping Pole, w. adjustable height, Clear Anodized,
for panels 78 3/4" (200 cm), 82 11/16" (210 cm) and 86 5/8" (220 cm)
39620 Plastic Trim Set, 33 1/2" (85 cm), Clear
39621 Plastic Trim Set, 33 1/2" (85 cm), Grey
39625 Plastic Trim Set, 33 1/2" (85 cm), Red
39626 Plastic Trim Set, 33 1/2" (85 cm), Blue
39628 Plastic Trim Set, 33 1/2" (85 cm), Green
39630 Plastic Trim Set, 39 3/8" (100 cm), Clear
39631 Plastic Trim Set, 39 3/8" (100 cm), Grey
39635 Plastic Trim Set, 39 3/8" (100 cm), Red
39636 Plastic Trim Set, 39 3/8" (100 cm), Blue
39638 Plastic Trim Set, 39 3/8" (100 cm), Green
39490 Nylon Bag, Padded, Black, for 33 1/2" unit
39492 Nylon Bag, Padded, Black, for 39 3/8" unit
39040 Halogen Spotlight, 50 W, Chrome, w. clip, 8.8 feet cord
and transformer, incl. black nylon bag
For 3-folded pole and snap-action top profile with hook, please contact us.
The telescoping pole hooks up to the track on the back of the top profile.
86 5/8" (220 cm) 82 11/16" (210 cm) 78 3/4" (200 cm) adjustable telescoping pole
R
OLL
-
I
T
-
U
P
4
sec
30
Form and Function in Perfect Harmony.
The next generation of retractable displays.
The top bar and the base unit of this system
disappear behind your graphic so customers
see all banner, no banner stand. The stylish
construction, from the top to the sleek oval
foot, has a uniquely sparkling finish that is as
durable as it is attractive. A spring-loaded
roller mechanism lets you adjust the tension
if the need arises. Line up several displays for
a powerful impression. The patented system
folds into a tidy package in its own sturdy, chic
nylon bag. It’s lightweight so it’s easy to ship.
Function. Style. Portability. All rolled into one
superior display.
ROLL-IT
-UP 4
39071 / 39074 39060
Use it once or use it for a long time.
This single-sided, non-retractable banner
stand gets great mileage in a POP or retail
scenario. Its sleek fish-shaped foot is made
of cast aluminum to give your message
gravity. And its special lacquer finish makes
it durable. A protective cylinder in the
optional travel bag keeps your graphic
panel clean and safe. Put two or more
together for a high-impact presentation.
This is the cost-effective solution that lets
your images stand for themselves.
I
MAGE
S
TAND
1
sec
45
SPECIFICATIONS
I
MA
GE
S
T
AND
1
39094 39097 39075 / 39070 39060 39081Pole with extrusion adapter is connected to top profile.
Foot is connected to bottom profile.
ImageStand 1, with snap-action top/bottom profiles and 3-folded pole. (Top/bottom profiles with double-sided adhesive tape available upon request.) Graphic panel and bag not included.
Standard graphic sizes:
39100 Silver Painted, 23 5/8'' x 85'' (60 cm x 216 cm) 39102 Silver Painted, 31 1/2'' x 85'' (80 cm x 216 cm) 39104 Silver Painted, 39 3/8'' x 85'' (100 cm x 216 cm) Weight: 7 lbs. (3.2 kg)
Base material: Silver painted aluminum Graphic panel: Several options available
Packaging: Re-usable carton box, nylon bag optional
39040 NON-RETRACT ABLE BANNER ST ANDS
18/19
OPTIONAL PARTS & ACCESSORIES
39094 Foot
39097 Top Extrusion Adapter
39075 Top/Bottom Profile Set, Snap-action,
Clear Anodized, 23 5/8" (60 cm)
39077 Top/Bottom Profile Set, Snap-action,
Clear Anodized, 31 1/2" (80 cm)
39079 Top/Bottom Profile Set, Snap-action,
Clear Anodized, 39 3/8" (100 cm)
39070 Top/Bottom Profile Set, w. Double-sided Adhesive Tape,
Clear Anodized, 23 5/8" (60 cm)
39072 Top/Bottom Profile Set, w. Double-sided Adhesive Tape,
Clear Anodized, 31 1/2" (80 cm)
39078 Top/Bottom Profile Set, w. Double-sided Adhesive Tape,
Clear Anodized, 39 3/8" (100 cm)
39060 Pole, 3-folded, Clear Anodized, for panel 77 1/8" (196 cm) 39062 Pole, 3-folded, Clear Anodized, for panel 85" (216 cm) 39064 Pole, 3-folded, Clear Anodized, for panel 93 5/16" (237 cm) 39081 Nylon Bag, Padded, Black, for 23 5/8" & 31 1/2" units 39082 Nylon Bag, Padded, Black, for 39 3/8" unit
39040 Halogen Spotlight, 50 W, Chrome, w. clip, 8.8 feet cord
Command attention. Do something unexpected.
This image stand is customizable in three ways:
height, width and shape. It uses horizontal
profiles that can be custom-cut to your specs
to let you display unusual contours. Make it tall
and thin, short and wide, or even V-shaped. The
slick tripod foot keeps it stable no matter the
configuration and folds for maximum portability.
Its optional carrying case was designed to
protect graphics.
ImageStand 2 goes from single to double-sided
with a simple snap-clip. The top and bottom
profiles disappear so your message always takes
center stage.
I
MAGE
S
TAND
2
sec
45
OPTIONAL PARTS & ACCESSORIES
39130 Foot, foldable
39132 Plastic Clip for single & double-sided
39060 Pole, 3-folded, Clear Anodized, for panel 74 13/16" (190 cm)
39062 Pole, 3-folded, Clear Anodized, for panel 82 11/16" (210 cm)
39064 Pole, 3-folded, Clear Anodized, for panel 90 9/16" (230 cm)
39075 Top/Bottom Profile Set, Snap-action,
Clear Anodized, 23 5/8" (60 cm)
39077 Top/Bottom Profile Set, Snap-action,
Clear Anodized, 31 1/2" (80 cm)
39079 Top/Bottom Profile Set, Snap-action,
Clear Anodized, 39 3/8" (100 cm)
39070 Top/Bottom Profile Set, w. Double-sided Adhesive Tape,
Clear Anodized, 23 5/8" (60 cm)
39072 Top/Bottom Profile Set, w. Double-sided Adhesive Tape,
Clear Anodized, 31 1/2" (80 cm)
39076 Top/Bottom Profile Set, w. Double-sided Adhesive Tape,
Clear Anodized, 39 3/8" (100 cm)
39083 Nylon Bag, Padded, Black, for 23 5/8" & 31 1/2" units
39084 Nylon Bag, Padded, Black, for 39 3/8" unit
39040 Halogen Spotlight, 50 W, Chrome, w. clip, 8.8 feet cord
and transformer, incl. black nylon bag
SPECIFICATIONS
39075 / 39070 39060 39083I
MA
GE
S
T
AND
2
39132extra clip for double-sided graphics
Insert the pole into the slot. Insert completely.
Choose Panel Size:
Max. width 39 3/8" (100 cm), max. height 90 9/16" (230 cm)
39130 39040 NON-RETRACT ABLE BANNER ST ANDS
20/21
ImageStand 2,with snap-action top/bottom profile and 3-folded pole. (Top/bottom profiles with double-sided adhesive tape available upon request.) Graphic panel and bag not included.
Standard graphic sizes:
39121 Silver Painted, 23 5/8'' x 82 11/16'' (60 x 210 cm)
39123 Silver Painted, 31 1/2'' x 82 11/16'' (80 x 210 cm)
39125 Silver Painted, 39 3/8'' x 82 11/16'' (100 x 210 cm)
Weight: 7 lbs. (3.2 kg)
Base material: Silver painted aluminum Graphic panel: Several options available
Just the basics, please. This cost-effective
image stand adapts to a variety of print
media – from inkjet to vinyl to fabric.
It comes with its own nylon travel bag
and reinforced graphic tube for safe
and easy transport, while its x-shaped
aluminum swivel stand folds flat. Make
it double-sided when you really need
to work the room or customize the
shape of the graphic panel for a unique
touch. Combine several for a first-class
performance. It's simply effective.
A
DAPT
sec
45
SPECIFICATIONS
A
D
APT
The single-sided Snap-Clip #37311 is used to connect the top and bottom horizontal bars to the vertical pole.To convert the single-sided unit into a double-sided, use Snap-Clip #37321 to place over the single-side clip.
REPLACEMENT PARTS
37011 Cross Base, Clear Anodized
37131 Pole, 3-folded, Clear Anodized, 75" (190.5 cm)
37231 Horizontal Bars, set of 2, w. Double-sided Adhesive Tape
& Endcaps, Clear Anodized, 24" (61 cm)
37311 Snap-Clip, single-sided, set of 2 (top & bottom), Grey, Plastic
37321 Snap-Clip, double-sided, set of 2, Grey, Plastic
37410 Nylon Bag, Black
39040 Halogen Spotlight, 50 W, Chrome, w. clip, 8.8 feet cord and
transformer, incl. black nylon bag
graphic with customized cup shape
37011 37131
37231
37410
37311
37321
Choose Panel Size:
Max. width 24" (61 cm), max. height 72" (183 cm)
39040 top bottom NON-RETRACT ABLE BANNER ST ANDS
22/23
Adapt, complete unit, single or double-sided, incl. top/bottom profiles w. double-sided adhesive tape, 3-folded pole, and black nylon bag. Graphic panel not included.
Standard graphic size:
39140 Clear Anodized, 24'' x 72" (61 x 183 cm)
Weight: 6 lbs. (2.7 kg)
Base material: Clear anodized aluminum Graphic panel: Several options available
S
TRETCH
B
ANNER
Show It in Style!
min
3
StretchBanner offers a refreshing new twist
to the traditional banner stand. It combines high
quality printed fabric graphics and a durable
anodized aluminum frame to create a contemporary
and modern looking design element. Truly lightweight
and portable, StretchBanner has a quick-lock
connector system which makes setup a breeze.
Stretch fabric will stretch in all four directions
which allows the graphic to be stretched around
the frame for a sleek crisp look. StretchBanner
will surely show it in style for your next event
or promotion.
StretchBanner, complete unit, aluminum, incl. black nylon bag. Graphic not included.
51120 Clear Anodized, 41'' x 79" (104 x 200 cm)
Weight: 18 lbs. (8.2 kg)
Base material: Clear anodized aluminum
Graphic panel: Dye-sublimation on Spandex fabric Packaging: Black nylon bag
SPECIFICATIONS
S
TRETCH
B
ANNER
NON-RETRACT ABLE BANNER ST ANDS24/25
LOCKING SYSTEM: A. B.A. Push in the pole stop to connect the two sections of the pole. The pole stop will pop up to lock in place. Use the same way to connect the top and the bottom parts of the pole with the horizontal tubings.
B. Adjust the pole to make it vertical and push down the lever to tighten the pole with the base tubing. pole stop
GRAPHIC INSTALLATION:
track
Slightly stretch the bottom of the fabric and insert the edge (with rope inside) into the track on the bottom side of the bottom tubing. Make sure the rope inside the fabric goes into the track completely. In the same way, insert the top edge of the fabric into the track on the top side of the top tubing.
top
bottom
The top and bottom edges of the fabric go to the end of the tracks and wrap around the corners of the endcaps on the top and bottom tubings. base tubing bottom tubing top tubing 2-section pole
F
ABRIC
W
ALL
sec
10
From Folded to Fabulous in Seconds.
FabricWall goes from folded to fabulous
in 10 seconds flat. Magnetic locks snap
the structure into place. All you have to
do is pull it up and watch your message
burst open. Make it double-sided for
maximum impact. The wrinkle-resistant
graphic panel attaches to the structure
with Velcro so you can swap graphics in
a flash. Premium print quality guarantees
vibrant visuals every time. And this
super-lightweight, super-portable
billboard-in-a-bag knocks down into a nylon duffel for
easy transport. Make a big statement.
Effortlessly.
SPECIFICATIONS
2 x 3 59" x 88 5/8" 3 x 3 88 5/8" x 88 5/8" 4 x 3 118" x 88 5/8" 4 x 4 118" x 118" The FabricWall structure builds on a "Square" system. Each square is 29 1/2" x 29 1/2" (75 x 75 cm). Depth of frame is 11 3/4" (30 cm).Select the size best suited for your needs.
OPTIONAL PARTS & ACCESSORIES
36400 Halogen Spotlight, 200 W, Quick Connect, Black, w. 10 feet
cord and 3-prong plug
39107 Support Foot
MAGNETIC LOCKING SYSTEM: 3x3 squares with side panels
39107
base with support foot
36400
26/27
F
ABRIC
W
ALL
FABRIC & POP-UP DISPLA
Y
S
For SoftCase or TransportCase, please see pg. 72-73.
FabricWall, lightweight aluminum construction with Velcro hubs. Graphic panel and case not included.
39114 2x3 squares, 59" x 88 5/8" (150 x 225 cm), 11 lbs. (5 kg) 39116 3x3 squares, 88 5/8" x 88 5/8" (225 x 225 cm), 16 lbs. (7.3 kg) 39118 4x3 squares, 118" x 88 5/8" (300 x 225 cm), 21 lbs. (9.6 kg) 39120 4x4 squares, 118" x 118" (300 x 300 cm), 26 lbs. (11.8 k g)
(4x4 requires 2 Support Feet # 39107)
Double-sided and other sizes available upon request Base material: Grey painted aluminum
Graphic panel: Dye-sublimation on wrinkle resistant fabric Packaging: Carton box or optional case
min
3
F
ABRI
C
OUNTER
Easy Setup, Easy Display.
Turn the tables with FabriCounter. This easy
to set-up, compact display does double duty:
use it as a table-top display or add a top
shelf to turn it into a counter. The frame
snaps together in an instant with magnetic
locks. Velcro tape makes switching the
wrinkle-resistant fabric graphic panel quick and easy.
Need to make a bigger statement? Join units
side-by-side to create a counter-table.
However you configure it, this simple display
tool gets your message on the table.
FABRIC & POP-UP DISPLA Y S
F
ABRI
C
OUNTER
SPECIFICATIONS
28/29
FabriCounter, lightweight aluminum construction with Velcro hubs. Graphic panel, top shelf and case not included.
39340 FabriCounter, 34 5/8" W x 34 5/8" H x 12" D
(88 cm W x 88 cm H x 30.5 cm D)
Double-sided available upon request Weight: 2 lbs. (0.9 kg)
Base material: Grey painted aluminum
Graphic panel: Dye-sublimation on wrinkle resistant fabric Packaging: Nylon bag or optional case
The fabric is attached to the hub of the frame by Velcro tape.
MAGNETIC LOCKING SYSTEM:
Velcro tape attaches to the top shelf
Velcro tape attaches to the fabric
Place the FabriCounter on top of a table to make it a table-top display.
COMBINATIONS WITH OTHER PRODUCTS:
with FabricWall with PopUp Elite
APPLICATIONS:
OPTIONAL PARTS & ACCESSORIES
39349 Top Shelf, Grey, 36" x 13 1/4" (91.5 x 34 cm), 7 lbs.
(3.2 kg), packed in the carton box
For SoftCase or TransportCase, please see pg. 72-73.
Add a top shelf on top of the FabriCounter to make it a counter-table.
Stretch your imagination with this inventive,
versatile display. Choose from a multitude
of combinations, then let the fun begin.
Arrange panels in novel ways, in 3D.
Change your message by changing the
panel. The button fastening system makes
it easy to play around. StretchWall is
accessory-friendly. Make it functional by
adding a display shelf. Attach a spotlight to
a configuration with a flat horizontal top.
S
TRETCH
W
ALL
Give Your Ideas Dimension.
FABRIC & POP-UP DISPLA
Y
S
SPECIFICATIONS
StretchWall, lightweight aluminum construction, painted grey. Incl. hubs with buttons. Graphic panels, shelf and case not included.
Double-sided and other configurations available Base material: Grey painted aluminum
Graphic panel: Dye-sublimation on Spandex fabric
Packaging: Carton box or optional case 36430
OPTIONAL PARTS & ACCESSORIES
36430 Shelf, Grey / Black
36400 Halogen Spotlight, 200 W, Quick Connect, Black,
w. 10 feet cord and 3-prong plug
39107 Support Foot (on certain configurations only)
On certain configurations, you can add a spotlight or display shelf to make a multi-functional display unit.
Stretch the graphic fabric and fasten it to the button-knob of the frame construction. One button-knob can hold up to four pieces of graphic fabric. BUTTON FASTENING SYSTEM:
APPLICATION OPTIONS: SAMPLE CONFIGURATIONS: 36400 39107 Wall 50206 Tower 50103 Pyramid 50502 Pyramid 50501 Triangle 50301
S
TRETCH
W
ALL
30/31
Wall 50204 Star 50405 Wall 50205 Star 50308 For SoftCase or TransportCase, please see pg. 72-73.P
OP
U
P
E
LITE
min
5
For Major Impact, Pop Up!
Stir up some excitement with this curvy
branding wall. Lightweight and portable,
this innovative system sets up as easy as
1-2-3. First, simply pull open the frame.
No hooks, no joints, only powerful magnet
locks. It’s that easy. Second, attach the
graphic panel onto the structure with
magnet strips. For maximum exposure,
use both sides to really show off your
visual composition. This system has serious
curve appeal. Pop up and present.
PopUp Elite was a winner of the 2008 Red Dot Design “Best of the Best” and “Product Design” awards.
OPTIONAL / SPARE PARTS & ACCESSORIES
44310 Panel Strip Set (top w. hangers & bottom), for inside curve
44312 Panel Strip Set (top w. hangers & bottom), for outside curve
44314 Panel Hangers, set of 2, for curved end panel
44318 Magnetic Bar, 3 folded
36400 Halogen Spotlight, 200 W, Quick Connect, Black,
w. 10 feet cord and 3-prong plug
SPECIFICATIONS
44310 / 44312
MAGNETIC LOCKING SYSTEM:
3x3 PopUp Elite frame
3x3 squares
P
OP
U
P
E
LITE
36400 88 5/8" (225 cm) 44318 44300 44302 88 5/8" (225 cm) 100 3/8" (255 cm) (310 cm)122"PopUp Elite can be double-sided. Each panel of the front side is 26 3/8" (67 cm). Each panel of the back side is 31 7/8" (81cm).
FABRIC & POP-UP DISPLA
Y
S
32/33
PopUp Elite, complete construction w. magnetic bars and panel strips for single-sided. Case optional. Graphic panels not included.
44300 3x3 squares (5 panels), Front, 100 3/8" x 88 5/8 (255 x 225 cm)
44301 3x3 squares (5 panels), Back, 100 3/8" x 88 5/8 (255 x 225 cm)
44302 4x3 squares (6 panels), Front, 122" x 88 5/8 (310 x 225 cm)
44303 4x3 squares (6 panels), Back, 122" x 88 5/8 (310 x 225 cm)
To create a double-sided unit, add necessary Panel Strip Sets and Magnetic Bars.
Base material: Black painted aluminum Graphic Panel: Laminated digital print Packaging: Carton box or optional case
C. B. magnet C. A. B. A. The frame is locked with magnet. The magnetic bar attaches to the frame.
Panel strip attaches graphic to magnet 44314
28 3/8" (72 cm)
37 13/16" (96 cm)
For SoftCase or TransportCase, please see pg. 72-73.
44303 44301 100 3/8" (255 cm) 4x3 squares 122" (310 cm) front back back front The magnetic bar attaches to the frame.
sec
30
R
OUND
U
P
360 Degrees of Visual Impact!
Make your message come full circle with
RoundUp. Use it as a podium, column,
or even a showcase. Make it tall or stout.
It is strong enough to be used as a display
base. Whatever type of wrap you prefer,
it will attach to the robust plates with just
magnetic tape. It’s as quick to assemble
as it is easy to exchange panels. Add the
optional middle plates to change and
elevate the set-up configuration when the
need arises. Change its look and function
each time you’ve got something new to
say. RoundUp is a tool you can use all
year round.
RoundUp, set of top and bottom plates in light grey, w. magnetic tape attached. Other colours available. Panel wrap not included.
45610 Set of Top & Bottom Plates, Light Grey, diam. 22" (56 cm)
Plate material: ABS plastic
Wrap: Various graphic panel options, Frontrunner, or transparent panel. Attached
with magnetic strips on top & bottom edges and Velcro tape to connect wrap vertically. The standard thickness is 0.03", but varies depending on application.
Packaging: Nylon bag or carton box with carrying handle for plates and carton
box for panel wrap
SPECIFICATIONS
back frontR
OUND
U
P
OPTIONAL PARTS & ACCESSORIES
45611 Bottom Plate, Light Grey, diam. 22" (56 cm)
45612 Top Plate, Light Grey, diam. 22" (56 cm)
45613 Middle Plate, Light Grey, diam. 22" (56 cm)
46115 Frontrunner Wrap, Black (indicate height, max. 48" / 122 cm)
45625 Transparent Panel Wrap incl. bottom shelf (Grey / Black)
(indicate height, max. 48" / 122 cm)
45617 Nylon Bag, Padded, Black
45611
45612
45613
graphic panel diam. 20" (51 cm) top & bottom plates diam. 22" (56 cm)
The two vertical ends of the wrap join to each other by overlapping Velcro tape A onto tape B.
carrying box for plates carton box for wrap
46115
Velcro tape B The plates come in a sturdy re-usable carrying box.
The plastic handle makes it convenient to take on the go. One box can hold one set of top and bottom plates, or one middle plate.
WRAP (back)
The wrap is vertically connected with Velcro tape and attached to the plates with magnetic tape. The magnetic tape on the top and bottom of the wrap is cut 1"(2.5 cm) shorter as not to overlap the Velcro tape.
1"(2.5 cm) Velcro tape 1"(2.5 cm)
Velcro tape (on the front of the wrap)
magnetic tape
magnetic tape PACKAGING: Carton boxes
Velcro tape A
64" (162.5 cm)
PODIUMS & DEMO STANDS
34/35
45625
45617
R
OUND
U
P
The wrap can be customized to desired height. For height above 60" (152.4 cm), it’s recommended to split the display using a Middle Plate.
Top Plate
Middle Plate
Bottom Plate
SET- UP COMBINATIONS: Single or Stacked You can create your own displays by combining wraps and plates. It’s as quick to assemble as it is easy to exchange panels. With the help of Middle Plates you can change the set-up configuration or just add-on when the need arises.
Graphics define the height of the unit. WRAP: Customized height
PLATES: ABS plastic
TOP PLATE
w. connecting ring underneath
MIDDLE PLATE
w. connecting ring on both sides
BOTTOM PLATE
The wrap can be made out of an array of different materials such as graphic panel, Frontrunner fabric, transparent plastic for creating a showcase, or translucent material for backlit.
VERSATILE PANEL MATERIALS:
Frontrunner fabric
Vinyl graphics with Velcro tape can be attached to the surface of the Frontrunner fabric.
graphic panel
APPLICATIONS: Combine with other Accenta products for different display purpose.
with FabricWall with PopUp Elite
transparent panel with a section of graphic
graphic panel
Vinyl graphic can be mounted on the transparent panel to add a dynamic look to your showcase.
vinyl graphic transparent panel
transparent panel
PODIUMS & DEMO STANDS
36/37
R
OUND
U
R
OUND
U
P
L
ITE
360 Degrees of Illumination!
min
5
RoundUp Lite features an illuminated pillar
which is available in variable heights up to
47" and a header panel to increase brand
awareness. Whether you’re displaying food
and beverages, hair and beauty products,
or shoes and accessories, RoundUp Lite
makes your message come full circle
with 360 degrees of illumination!
RoundUp Lite, set of 2 plates, diam. 22" (56 cm) (types depending on configuration), light grey, w. 12" (30.5 cm) shelves attached at center, incl. magnetic tapes. Built-in T5 lamps, UL and CSA approved (see below for different heights), incl. 4 feet cord w. 3-prong plug. Other plate colours available.
All required components to be purchased separately.
RoundUp Lite is an added feature to the standard RoundUp (see pg. 34-37). Plate material: ABS plastic
Wrap: Various graphic panel options, Frontrunner, or translucent substrate.
Attached with magnetic strips on top & bottom edges and Velcro tape to connect wrap vertically. The standard thickness is 0.03", but varies depending on application.
Packaging: Carton box with carrying handle for plates and carton box for panel
wrap (see pg. 35)
SPECIFICATIONS
R
OUND
U
P
L
ITE
PODIUMS & DEMO STANDS
38/39
45610
45600
46213
translucent wrap
middle plate, serves as a display shelf with stop-edge.
REQUIRED COMPONENTS
45610 Set of 2 Plates (indicate type), diam. 22" (56 cm), w. shelves, diam. 12"
(30.5 cm) attached, incl. magnetic tape
45600 Translucent Wrap w. magnetic and Velcro tape attached (indicate height,
min. 2" higher than the light fixture)
46213 Complete light fixture w. 2 x 8 W T5 lamp, 13" (33 cm) H
46222 Complete light fixture w. 2 x 13 W T5 lamp, 22" (56 cm) H
46223 Complete light fixture w. 2 x 14 W T5 lamp, 23" (58 cm) H
46235 Complete light fixture w. 2 x 21 W T5 lamp, 35" (89 cm) H
46247 Complete light fixture w. 2 x 28 W T5 lamp, 47" (119.4 cm) H
T-5 lamps magnetic tape attached to the shelf Velcro tape magnetic tape magnetic tape
Our series of Podiums are built in
the HingeLine System (see pg. 75)
that can be folded flat for easy
transportation and storage. They
are the perfect solution for both
temporary and permanent
displays. As a standard, Podiums
come with top shelf and in-fill
panels in vinyl covered board,
but a wide variety of materials
and colors including graphic
panels are available upon request.
sec
30
P
ODIUMS
SPECIFICATIONS
P
ODIUMS
PODIUMS & DEMO STANDS
40/41
Opens 0º-180º
PANEL OPTIONS: Attach graphic panel on front of the extrusion with magnetic tape.
In-fill panel (max. thickness 1/4" / 6 mm) goes into the track of the extrusion.
16” (40.6 cm) 40 1/2” (102.9 cm) 24” (61 cm) 24” (61 cm) 1 1/4” (3.2 cm) 24” (61 cm) top view folded
Complete aluminum construction built in our HingeLine System for easy folding. Incl. top shelf and in-fill panels in white, grey or black vinyl covered board.
52015 Podium, 16" W x 40" H x 16" D
(40.6 W x 101.6 H x 40.6 D cm), incl. top shelf
52005 Podium, 24" W x 16" H x 24" D
(61 W x 40.6 H x 61 D cm), incl. top shelf
52010 Podium, 24" W x 24" H x 24" D
(61 W x 61 H x 61 D cm), incl. top shelf
52001 Podium, 44" W x 16" H x 24" D
(111.8 W x 40.6 H x 61 D cm),
incl. oval top shelf 16” (40.6 cm)
1 1/4” (3.2 cm) 44” (111.8 cm) 55” (139.7 cm) 24” (61 cm) top view folded 40” (101.6 cm) 24 1/2” (62.2 cm) 16” (40.6 cm) 1 1/4” (3.2 cm) 16” (40.6 cm) folded top view
Use Allen Key to change panels.
D
EMO
S
TAND
Easy Promotor!
min
3
Attractive and impactful, DemoStand makes any
demonstration look professional. DemoStand
is a portable demonstration tool as well
as a sampling stand or information booth.
Customize the curved base and roomy header
with your graphics or logo. Easy-clean, high
impact polystyrene top has resilient molding
on the edges for protection. Its worktop is as
durable as its inner shelves which allow for
plenty of storage space for supplies or product.
And when the show is over, it folds flat and
travels light and hassle-free in its own nylon bag.
Go ahead – show and tell.
SPECIFICATIONS
D
EMO
S
T
AND
PODIUMS & DEMO STANDS
42/43
Complete DemoStand unit in polypropylene with built-in "hinges" for easy folding. Vacuum formed super high impact polystyrene top. Incl. Header board, inside shelf and a black padded nylon carrying case. Graphic panels not included.
51110 DemoStand unit, White
(34 5/8" W x 88 1/4" H x 18 1/4" D (87.9 W x 224.2 H x 46.4 D cm)
Weight: 31 lbs. (14 kg)
Base material: Polypropylene and polystyrene Packaging: Padded nylon carrying case
OPTIONAL PARTS & ACCESSORIES
51111 Full colour graphic panel for Header Board
51112 Full colour graphic panels for Front and Side Panels
UNIT: GRAPHIC:
top
side side
Easy Lock System:
The indented tabs on the sides of the top / bottom plates lock into the slots of the side panels.
side panel
bottom plate
Make a Snap Decision.
Q
UIK
F
RAME
It’s an open and shut case. QuikFrame’s
c-spring clips snap open on all four
sides for swift and effortless graphic
changes. Hang it or attach it to
a freestanding display. There are many
options with QuikFrame. Pick a size.
Choose a rounded or mitered corner.
You can customize it to your dimensions
and choose a special finish or colour.
Double-side it for twice the impact.
It’s so very versatile. Wherever there’s
a poster, there’s a need for QuikFrame.
sec
Optional bottom flat wall extrusion w/o back panel (only for mitered corners):
wall graphic non-glare film 7/8" (0.22 cm) 3/8" (0.1cm)
SPECIFICATIONS
Q
UIK
F
RAME
Other finishes and colours can be customized.
34020 34010 unfinished hardboard rounded corner mitered corner Black Painted Satin Chrome Polished Chrome Clear Anodized double-sided frame with eyelet hook single-sided frame with eyelet hook Black Painted wall back panel graphic non-glare film
Standard finishes and colours for mitered or rounded corners:
Standard frame with back panel:
OPTIONAL PARTS & ACCESSORIES
34010 Easel for size 8 1/2" x 11" only
34020 Eyelet Hook, per piece
34030 Slatwall Hook, per piece
34040 Z-bar for wall hanging (indicate poster width)
31501 Non-glare protection sheet, 8 1/2" x 11"
31511 Non-glare protection sheet, 11" x 17"
31561 Non-glare protection sheet, 20" x 24"
31581 Non-glare protection sheet, 22" x 28"
31621 Non-glare protection sheet, 24" x 36"
31641 Non-glare protection sheet, 30" x 40"
31661 Non-glare protection sheet, 36" x 48"
39045 Halogen Spotlight, 50 W, Chrome, w.
bracket, 8.8 feet cord and transformer
31501-31661 34030 wall z-bar z-bar Quik-Frame 34040 3/8" (0.1cm) 7/8" (0.22 cm)
FRAMES & HANGING SY
STEMS
44/45
Spotlight with bracket to be attached on the backside of QuikFrame. 39045QuikFrame with mitered or rounded corners. Aluminum in clear anodized or black painted. Incl. unfinished hardboard back panel.
Standard sizes:
3008 - * 8 1/2" x 11" poster size, mitered corner 3011 - * 11" x 17" poster size, mitered corner 3020 - * 20" x 24" poster size, mitered corner 3022 - * 22" x 28" poster size, mitered corner 3025 - * 24" x 36" poster size, mitered corner 3030 - * 30" x 40" poster size, mitered corner 3036 - * 36" x 48" poster size, mitered corner 3108 - * 8 1/2" x 11" poster size, rounded corner 3111 - * 11" x 17" poster size, rounded corner 3120 - * 20" x 24" poster size, rounded corner 3122 - * 22" x 28" poster size, rounded corner 3125 - * 24" x 36" poster size, rounded corner 3130 - * 30" x 40" poster size, rounded corner 3136 - * 36" x 48" poster size, rounded corner * (Code-1) Clear Anodized, (Code-3) Black Painted Customized sizes and finishes available
Double-sided is 2 frames connected back-to-back.
QuikFrame. Endless combinations and uses. Mount it on walls, windows, even vehicles. Spark some interest. Use it with a lightbox. Precision-punched holes on the back of the frame line up perfectly so connecting two frames for double-sided display is easy. Look around for inspiration. This frame integrates seamlessly with a multitude of display tools. With such versatility, QuikFrame has many sides.
QUIKFRAME CAN BE WIDELY APPLIED:
Q
UIK
F
RAME
A-frame
for slatwall
M
OST COMBINATIONS AND USES CAN BE APPLIED TOI
NF
RAME.
w. brochure holder
multi-frame
on tripod 3-frame
Q
UIK
F
RAME
as hanging sign on PosterStand 1 on wall on LightBoxFRAMES & HANGING SY
STEMS
46/47
on InfoStand
on customized display
Innovative and customizable, this tool
emphasizes your brand message, all
the way around. Its patented design
allows you to easily slide your message
into the frame edges and change it
as often as you wish. Use it to update
information or reinforce your brand
identity. Go with a custom finish in
wood or metal for a stylish, detailed
look. The snapframe mechanism
holds the center graphic firmly in place
until you are ready to swap it. Use it
single-sided or double it up for twice
the impact.
InFrame. A new frame of reference in
poster displays.
I
N
F
RAME
min
1
SPECIFICATIONS
I
N
F
RAME
back panel & graphic spring slide in the graphic back frame Frame open: Frame closed:slide in the graphic
OPTIONAL PARTS & ACCESSORIES
34020 Eyelet Hook, per piece.
34030 Slatwall Hook, per piece.
34040 Z-bar for wall hanging (indicate poster width)
31511 Non-glare protection sheet, 11" x 17"
31561 Non-glare protection sheet, 20" x 24"
31581 Non-glare protection sheet, 22" x 28"
31621 Non-glare protection sheet, 24" x 36"
31641 Non-glare protection sheet, 30" x 40"
31661 Non-glare protection sheet, 36" x 48"
39045 Halogen Spotlight, 50 W, Chrome, w.
bracket, 8.8 feet cord and transformer
34020 double-sided frame with eyelet hook single-sided frame with eyelet hook 31511-31661 34030 wall z-bar z-bar In-Frame 34040 back frame
spring back panel & graphic slide-in graphic spring non-glare protection sheet (optional) graphic back panel front frame 1 1/4" (3.2 cm) 7/8" (0.22 cm) Unleash your imagination!
InFrame can be as widely applied as QuikFrame.
For more applications, please see pg. 46-47.
InFrame with mitered corners, clear anodized aluminum, and unfinished hardboard back panel.
Standard sizes:
32001 11" x 17" poster size, mitered corner
32003 20" x 24" poster size, mitered corner
32005 22" x 28" poster size, mitered corner
32007 24" x 36" poster size, mitered corner
32009 30" x 40" poster size, mitered corner
32011 36" x 48" poster size, mitered corner Customized sizes and other colours available Double-sided is 2 frames connected back-to-back.
InFrame accepts slide-in graphics in a multitude of substrates, incl. laminate in wood grain and other patterns. Slide-in graphics are 2" (5.1 cm) in width and a thickness of 0.05" (1 mm).
FRAMES & HANGING SY
STEMS
48/49
Spotlight with bracket to be attached on the backside of InFrame. 39045sec
30
E
X
S
TREAM
Got Hang-Ups?
It’s a simple concept that works. And
works and works. It lets you hang your
graphics virtually anywhere. Display
graphics printed on fabric, paper, vinyl
and more. Its strong snap hangers work
especially well with fabric graphics! Insert
hanging hooks to suspend your visuals
from the ceiling. Use suction cups for
a window display. Or use Velcro to make
your message stick. Hang graphics of
any length or width.
Hang it high, hang it low, make it wide,
make it thin. It’s easy to hang with ExStream.
SPECIFICATIONS
E
X
S
TREAM
attach to any background with Velcro or tape hanging mounting to wall with hardware attach to glass with suction cups APPLICATIONS:ExStream, top & bottom aluminum snap-profiles, including 4 endcaps & 2 hooks. Each profile consists of one front and one back extrusion. Recommended max. thickness of print media is 0.025".
Standard sizes:
38541 Clear Anodized, 24" (61 cm) L
38551 Clear Anodized, 36" (91 cm) L
38561 Clear Anodized, 48" (122 cm) L
Customized sizes available
OPTIONAL PARTS & ACCESSORIES
38501 Snap-profile Set (front & back extrusions),
Clear Anodized, max. 132" (335 cm) L
38521 Endcap, Left, Grey Plastic
38522 Endcap, Right, Grey Plastic
38531 Hanging Hook, Grey, Plastic
38501
38531 38521
Insert the hanging hooks into top track, and close ends with endcaps.
FRAMES & HANGING SY
STEMS
50/51
38522
back front
sec
30
T
RIM
L
ITE
A Bright Concept.
Get enlightened with this new generation
of graphic light panels. Ultra-thin design.
Edge-housed lighting to minimize hot
spots and give bright, even illumination.
Do-it-yourself maintenance and
quick-change bulbs add value and convenience.
The easy-loading snapframe makes
changing graphics a breeze. Use
single-sided or double – it's up to you.
TrimLite. Illuminate your ideas.
52/53
SPECIFICATIONS
OPTIONAL PARTS & ACCESSORIES
34021 Eye Bolt, per piece
34040 Z-bar for wall hanging (indicate poster width)
31561 Non-glare protection sheet, 20" x 24"
31581 Non-glare protection sheet, 22" x 28"
31621 Non-glare protection sheet, 24" x 36"
31641 Non-glare protection sheet, 30" x 40"
31661 Non-glare protection sheet, 36" x 48"
T
RIM
L
ITE
on PosterStand as hanging signmounting on the wall by using Z-bar
on InfoStand on InfoStand on InfoStand w. wheels on InfoStand w. brochure rack 34021 double-sided frame with eye bolt single-sided frame with eye bolt 31561-31661 wall z-bar z-bar Trim-Lite 34040 T-5 lamp foil
non-glare protection sheet (optional)
foil acrylic
light deflector T-5 lamps, with 20,000 hrs.
of estimated life, are installed vertically on both sides of the frame. The graphic is placed between the acrylic underneath and the optional non-glare protection sheet on the top.
LIGHT BO
XES
TrimLite with mitered corners only, clear anodized aluminum. Built-in T-5 lamp, UL and CSA approved, incl. 10 feet cord w. 3-prong plug.
Standard sizes:
32601 20" x 24" poster size, mitered corner
32603 22" x 28" poster size, mitered corner
32605 24" x 36" poster size, mitered corner
32607 30" x 40" poster size, mitered corner
32609 36" x 48" poster size, mitered corner
Customized sizes and finishes available Double-sided also available
sec
30
Shed some light on the matter with this classic
lightbox. QuikFrame (pg.44-47) on the front
makes it easy to change graphics. Use any type
of backlit print media to illuminate your ideas.
Its thin T-5 fluorescent tubes create a brilliant
uniformed light. Even double-sided. Let your
message shine through.
L
IGHT
B
OX
SPECIFICATIONS
L
IGHT
B
OX
LightBox is aluminum housing with QuikFrame front, mitered corners only. 4" in depth, incl. sign white acrylic that covers light fixture of T5-type. UL and CSA approved, incl. 6 feet cord w. 3-prong plug (indicate exit point).
Standard sizes:
33041 LightBox, Clear Anodized, 20" x 24"
33051 LightBox, Clear Anodized, 24" x 36"
33071 LightBox, Clear Anodized, 36" x 48"
33043 LightBox, Black Painted, 20" x 24"
33053 LightBox, Black Painted, 24" x 36"
33073 LightBox, Black Painted, 36" x 48"
OPTIONAL PARTS & ACCESSORIES
34021 Eye Bolt, per piece
31561 Non-glare protection sheet, 20" x 24"
31621 Non-glare protection sheet, 24" x 36"
31661 Non-glare protection sheet, 36" x 48"
as hanging sign
on InfoStand mounting on the wall
sign white acrylic panel
graphic
T5 fluorescent light
T-5 lamps, with 20,000 hrs. of estimated life, are installed vertically or horizontally inside of the frame. The graphic is placed on top of the sign white acrylic.
double-sided LightBox with eye bolts
LightBox LightBox
34021
31561-31661
Non-glare protection sheet may be added on top of the graphic as an option.
side 1 side 2
LIGHT BO
XES
Our new series of table top and floor
screens make it effortless to arrange
a great looking exhibit or dividing wall.
Choose from our standard collection or
customize to your specifications. Panels
may be single or double sided. All units
fold together flat with features such as
lightweight construction and simplicity.
These displays present themselves as
serious portable contenders.
Partition with Purpose.
T
ABLE
T
OP
& F
LOOR
S
CREENS
Opens 0º-180º
GRAPHIC PANEL OPTIONS: Attach graphic panel on
front of the extrusion with magnetic tape.
In-fill panel (max. thickness 1/4" / 6 mm) goes into the track of the extrusion.
Use Allen Key to change panels.
T
ABLE
T
OP
& F
LOOR
S
CREENS
TABLE T OP & FLOOR SCREENSSPECIFICATIONS
56/57
Complete aluminum construction built in our HingeLine System for easy folding. Panels not included. Packed in carton box.
CUSTOMIZE SIZE, CONFIGURATION & PANEL MATERIALS:
For special attention, 2-panel unit combined with high Podium (pg. 40-41).
Semi-transparent panels to separate without blocking the view.
Back-drop on exhibits combined with sign panel and HingeCounter (pg. 58-59).
Play with effects, use wood, metal, perforated materials, graphic prints, etc.
36” (91.4 cm) 1 1/4” (3.2 cm) 37 1/4” (94.6 cm) 1 7/8” (4.8 cm) 24 1/2” (62.2 cm) 72” (182.9 cm) 3” (7.6 cm) 24 1/2” (62.2 cm) 72” (182.9 cm) Configuration Examples: 0 º - 180º hinge action Configuration Examples: 0 º - 180º hinge action Configuration Examples: 0 º - 180º hinge action
52020 Table Top, 3-folded,
36" (91.4 cm) H
52025 Floor Screen, 3-folded,
72" (182.9 cm) H
52030 Floor Screen, 4-folded
72" (182.9 cm) H
The foldable hinge construction makes this
counter quick to set up and take down.
Besides being practical, the HingeCounter
is the perfect branding and promotional tool.
We show you our 3 standard designs, but the
many possibilities of customizing is guaranteed
to make it fit your needs. Choose in-fill panels
or the all-covering graphic panel attached with
magnetic tape.
Combine HingeCounter with other HingeLine
products (see pg. 40-41, pg. 56-57 and pg. 75).
min
1
H
INGE
C
OUNTER
Portable, Foldable.
Opens 0º-180º
52040
Use Allen Key to change panels.
48” (121.9 cm) 23” (58.4 cm) 38” (96.5 cm) 8” (20.3 cm) 54” (137.2 cm) 20” (50.8 cm) 36” (91.4 cm) 38” (96.5 cm) 38” (96.5 cm) 36” (91.4 cm) 20” (50.8 cm) 31 3/8” (79.7 cm) 5” (12.7 cm) 9 3/4” (24.8 cm) 36” (91.4 cm)
SPECIFICATIONS
H
INGE
C
OUNTER
COUNTER58/59
CUSTOMIZE SIZE, SHAPE & CONFIGURATION (EXAMPLES):
Inside Shelf:
Ordered with the original purchase
Reception Top:
Other shapes available
Doors & Shelves:
Ordered with the original purchase
Presentation Shelf:
Not attached, other shapes available Thru-shelf: Gives character as well as inside-shelf PANEL OPTIONS: Attach graphic panel on front of the extrusion with magnetic tape.
HingeCounter, complete aluminum construction, incl. top shelf in white, grey or black vinyl covered board. Panels and inside shelf not included. Packed in carton box.
CONSTRUCTION: A combination of straight and curved sections
52050 HingeCounter, 36" W x 38" H x 20" D
(91.4 W x 96.5 H x 50.8 D cm), incl. top shelf
52040 HingeCounter, 48" W x 38" H x 23" D
(121.9 W x 96.5 H x 58.4 D cm), incl. top shelf
52045 HingeCounter, 54" W x 38" H x 20" D
(137.2 W x 96.5 H x 50.8 D cm), incl. top shelf
In-fill panel goes into the track of the extrusion. Thickness depends on application (max. 1/4" / 6 mm) folded top view folded top view folded top view