• No results found

Failure analysis of a re-design knuckle using topology optimization

N/A
N/A
Protected

Academic year: 2020

Share "Failure analysis of a re-design knuckle using topology optimization"

Copied!
9
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 1. Design flow chart for lightweight design and analysis ofsteering knuckle.
Figure 5. Boundary conditions for impact load case.
Table 2. Material properties of knuckle used in finite element sim-ulations.
Figure 11. Boundary conditions for fatigue life analysis.
+4

References

Related documents

We hypothesized that “overall mean error duration” (2HAND) and “performance level” (AHA) would also, or even better, predict performance in the neurofeedback approach to

CUAJ ? November December 2013 ? Volume 7, Issues 11 12 ? 2013 Canadian Urological Association 425 Original researchOriginal research Cite as Can Urol Assoc J 2013;7(11 12) 425 9 http

Lyapunov inequalities of left focal q difference boundary value problems and applications Zhang et al Advances in Difference Equations (2019) 2019 131 https //doi org/10 1186/s13662

Liu et al Advances in Difference Equations 2013, 2013 338 http //www advancesindifferenceequations com/content/2013/1/338 R ES EARCH Open Access Dynamics of a class of neutral three

The bitwise XOR operation (pixel by pixel) between two images is initiated from the initial pixel position of both images. The XOR operation may vary from

Recyclability Index of GSGR75 at an optimal parametric setting is 59% (meaning parts produced from this recycling technique have 59% physical and mechanical

manure feedstock source and pyrolysis temperature, the remaining data were analyzed using analysis of variance using the GLM procedure of SAS with sources of variation

AE: Adverse event; CE: Conformité Européenne (European Conformity); CIC- IT: Clinical Investigation Centre for Innovative Technology; CRA: Clinical research assistant; CT: