• No results found

Near State Vector Selection Based Model Predictive Control with Common Mode Voltage Mitigation for a Three Phase Four Leg Inverter

N/A
N/A
Protected

Academic year: 2020

Share "Near State Vector Selection Based Model Predictive Control with Common Mode Voltage Mitigation for a Three Phase Four Leg Inverter"

Copied!
19
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 1.Figure 1. Three-phase four-leg inverter with a field programmable gate array (FPGA) control block
Table 1. The switching states with phase voltages in the abc coordinate.
Figure 2.Figure 2. (a) Switching vectors and prisms (b) Projection of a sector on the αβ coordinate (c) Sector identification with near state vector selection (NSV)
Table 3. Corresponding common mode voltage (CMV) based on the near state vector (NSV) ofeach sector.
+7

References

Related documents

The Grande Ecole Master’s degree in International and European Business; Exchange students from partner universities may join our programs as dual degree students,

Field experiments were conducted in order to test the removal efficiency of DOC and turbidity by GAC filter column operated at different filtration velocities and the possibility of

Copyright © 2011 Railway Association of Canada. All rights reserved. | Association des chemins de fer du Canada. Tous droits

We do not obtain any significant coefficients for our variable of interest when conducting estimations with two-year lagged accident rates (data not shown),

The Financial Planning Association® (FPA®) has partnered with more than 75 leading practice management and insurance fi rms to provide our members with exclusive

RENTS, ISSUES AND PROFITS, INCLUDING BUT NOT LIMITED TO SECURITY DEPOSITS, MINIMUM RENTS, PERCENTAGE RENTS, ADDITIONAL RENTS, COMMON AREA MAINTENANCE CHARGES, PARKING CHARGES,

For measurements with hot-wire anemometry, a DANTEC 55P62 constant temperature hot-wire anemometer sensor (CTA) system was used. The sensor was made out of Pt- plated tungsten

The software components are: the server, the client and the admin (the management application). The Server is the main application of the product and it’s 2 main roles are: