Distribution System Planning using  Network Reconfiguration for Loss Reduction                                

Hasil penelitian : (1) fenomena day of the week effect terjadi pada BEI periode 2010-2012 dimana hari Kamis berpengaruh terhadap return indeks pasar secara parsial (2)

[r]

Once the engine has started, the speed control point is determined, first by the IDLE speed set point and the SPEED RAMPING circuit, After engine speed ramp- ing has been completed,

For each local post office, data on total annual operating costs, hourly wage, price of capital were obtained directly from the regional direction of the Swiss Post company..

A CNC based friction stir welding machine is a single station automated cell which can be programmed to perform both linear and non-linear welds capable of

Ijtim ā ’iyya, Volume 1, Number 1, September 2016 11. that equal to the interpretation and comprehension of mulat

Technopolises fulfill a forming function while influencing the development of regions where they are located and provide for the increase of innovative activity, the

Gateway Mobile Location Center (GMLC), which interrogates the HLR-FE for routing information in order to obtain mobile positioning information stored in Centralized User Database