• No results found

Unit LT01 Carry Out Routine Lift Truck Maintenance

N/A
N/A
Protected

Academic year: 2022

Share "Unit LT01 Carry Out Routine Lift Truck Maintenance"

Copied!
46
0
0

Loading.... (view fulltext now)

Full text

(1)

Unit LT01 – Carry Out Routine Lift Truck Maintenance

UNIT OVERVIEW

This unit is about conducting routine maintenance, adjustment and replacement activities as part of the periodic servicing of Lift Trucks.

SCOPE OF THIS UNIT:

All of the items listed below form part of this National Occupational Standard.

1. Sources of technical information are:

a. lift truck technical data b. schedules of inspection c. regulations

2. Examination methods are:

a. aural b. visual c. functional d. measurements

3. Assessments are for:

a. malfunction b. damage c. fluid levels d. leaks e. wear

f. condition and serviceability g. conformity

h. necessity for adjustment(s)

ESSENTIAL KNOWLEDGE You need to know and understand:

Legislative and organisational requirements and procedures

K1. the manufacturer’s and legal requirements relating to routine maintenance activities for lift truck systems and components.

K2. the legal requirements relating to the lift truck

K3. the health and safety legislation and workplace procedures relevant to lift truck maintenance and repair activities including PPE.

K4. your workplace procedures for

 recording maintenance work and any variations from the original specification

 the referral of problems

(2)

 reporting delays to the completion of work

K5. the importance of documenting maintenance information K6. how to complete a maintenance report

K7. the importance of working to agreed timescales and keeping others informed of progress.

K8. the relationship between time and costs.

K9. the importance of reporting anticipated delays to the relevant person(s) in authority promptly.

K10. The responsibilities towards environmental issues for:

 your organisation

 the customer workplace in which you are working

 yourself

Use of technical information

K11. how to find, interpret and use sources of technical information for scheduled maintenance activities including manufacturers’ recommended timescales and on-board diagnostic displays.

K12. the importance of using the correct sources of technical information.

K13. the purpose of and how to use identification codes.

Lift truck system operation

K14. how power plant systems for lift trucks operate; including gas, diesel, electric and alternative fuels

K15. how transmission systems and components, for internal combustion and electric lift trucks function.

K16. how the lifting systems, steering systems, braking systems operate.

K17. the purpose, operating principles, location and limits of responsibility of power storage systems (including batteries), power generating systems,(including off vehicle charging systems)

starting systems.

K18. the operating specifications and tolerances for the type(s) of lift trucks that you are maintaining.

Routine maintenance requirements

K19. how to conduct scheduled, routine examination methods and assessments against specifications to identify damage, corrosion, inadequate fluid levels, leaks, wear and general condition and serviceability.

K20. check and make adjustments to clearances, gaps, settings, alignment, pressures, tension, speeds and levels in accordance with the manufacturers’ service schedule

K21. how to replenish and replace routine service components and materials in accordance with the service schedule.

K22. how to identify and report damage to the lift truck.

K23. how to identify codes and grades of lubricants.

K24. how to work safely avoiding damage to the lift truck and its systems.

PERFORMANCE OBJECTIVES

(3)

To be competent you must:

a. use suitable personal protective equipment throughout all lift truck maintenance activities.

b. use suitable sources of technical information to support all your lift truck maintenance activities.

c. use the correct specifications and tolerances appropriate to the lift truck you are working on, when making assessments of system and component performance.

d. where the lift truck being worked upon falls outside the manufacturer’s original specification, record details accurately and use this adapted specification as the basis for your examination and assessment.

e. examine the lift truck’s systems and components following:

the manufacturer’s approved examination methods

 your workplace procedures

 health and safety requirements.

f. Ensure any other problems that you notice whilst carrying out your servicing activity are reported to the relevant person(s) in authority promptly

g. carry out adjustments, replacements and replenishment of consumable materials following the manufacturer’s current specification and timescales for:

 the particular service interval

 working methods and procedures

 use of equipment

 tolerances relevant to the lift truck you are working on.

h. where system adjustments cannot be made within the manufacturer’s specification, record the details accurately and report these deviations to the relevant person(s).

i. Carry out a risk assessment to avoid risk of damage to the lift truck, its systems, the surrounding environment and yourself.

j. use suitable testing methods to evaluate the performance of all replaced and adjusted components and systems accurately, prior to returning the lift truck to the customer.

k. report any problems or issues relating to the lift truck’s condition or conformity to the relevant person(s) promptly.

l. ensure your maintenance records are accurate, complete and passed to the relevant person(s) promptly in the format required.

m. complete all lift truck maintenance activities within the agreed timescale.

n. report any anticipated delays in completion to the relevant persons(s) in authority promptly.

(4)

Unit LT02 – Remove and Replace Power Plant Units and Components

UNIT OVERVIEW

This unit is about removing and replacing units and components where dismantling and re-assembly of the power plant is required. It is also about evaluating the performance of replaced units and components. The units and components concerned are those outside those replaced as part of normal routine, lift truck maintenance (servicing) activities.

SCOPE OF THIS UNIT:

All of the items listed below form part of this National Occupational Standard

1. Equipment is:

a. hand tools

b. special workshop tools and equipment c. general workshop equipment

d. electrical testing equipment

2. Testing methods are:

a. visual b. aural c. functional d. measurement

3. Unit and components are:

a. mechanical b. electrical

4. Power plant systems and components are:

a. diesel and gas engine mechanical systems b. cooling systems

c. air supply and exhaust systems d. fuel and ignition systems e. engine electrical systems f. lubrication systems g. electric motor systems h. motor control systems i. hybrid storage systems j. starting systems (IC) k. charging systems

ESSENTIAL KNOWLEDGE

(5)

You need to know and understand:

Legislative and organisational requirements and procedures

K1. the legal requirements relating to the lift truck

K2. the health and safety legislation and workplace procedures relevant to lift truck maintenance and repair activities including PPE.

K3. your workplace procedures for

 recording removal and replacement information

 the referral of problems

 reporting delays to the completion of work

K4. the importance and purpose of recording removal and replacement activities.

K5. the importance of working to agreed timescales and keeping others informed of progress.

K6. the relationship between time and costs.

K7. the importance of reporting anticipated delays to the relevant person(s) in authority promptly.

Use of technical information

K8. how to find, interpret and use sources of information applicable to unit and component removal and replacement within power plant systems.

K9. the importance of using the correct sources of technical information K10. the purpose of and how to use identification codes.

Electrical and electronic principles

K11. lift truck earthing methods.

K12. electrical and electronic principles associated with lift truck power plant systems, including types of sensors, actuators, their application and operation.

K13. types of circuit protection and why these are necessary.

K14. electrical safety procedures.

K15. how warning, charging and starter circuits work.

K16. Electrical units, terms and schematics K17. battery charging and voltage

K18. electronic control system principles.

Power Plant system operation and construction

K19. how power plant systems and their related units and components are constructed, dismantled and reassembled for the classification of lift truck worked upon.

K20. how power plants and their related units and components operate for the classification of lift truck worked upon.

Equipment

K21. how to prepare, test and use all the removal and replacement equipment required.

Engine unit and component removal and replacement

K22. how to remove and replace power plant system mechanical and electrical units and components for the classification of lift truck worked upon.

K23. how to file, fit, tap, thread, cut and drill plastics and metals.

K24. how to select and fit gaskets, sealants, fittings and fasteners.

(6)

K25. how to test and evaluate the performance of replacement power plant unit and components and the reassembled system against the lift truck operating specifications and any legal requirements.

K26. the use of appropriate test methods

K28. the manufacturer’s specification for the type and quality of power plant units and components to be used.

K29. how to work safely avoiding damage to other lift truck systems, components and units

and contact with leakage and hazardous substances relating to yourself and the environment.

PERFORMANCE OBJECTIVES To be competent you must:

a. wear suitable personal protective equipment throughout all removal and replacement activities.

b. support your removal and replacement activities by reviewing

 lift truck technical data

 removal and replacement procedures

 legal requirements.

c. prepare, test and use all the equipment required following manufacturers’ instructions.

d. carry out all removal and replacement activities following;

 manufacturers’ instructions

 your workplace procedures

 health and safety requirements.

e. you work in a way which minimises the risk of:

 damage to other lift truck systems

 damage to other lift truck components and units

 injury to yourself and others

 contact with hazardous substances.

 Instability when working on the lift truck

f. ensure replaced engine units and components conform to the lift truck operating specification and any legal requirements.

g. record and report any additional faults you notice during the course of your work promptly.

h. use suitable testing methods to evaluate the performance of the reassembled system i. ensure the reassembled engine system performs to the lift truck operating specification and

meets any legal requirements prior to return to the customer.

j. ensure your records are accurate, complete and passed to the relevant person(s) promptly in the format required.

k. complete all removal and replacement activities within the agreed timescale.

l. report any expected delays in completion to the relevant person(s) in authority promptly.

(7)

Unit LT03 - Remove and Replace Lift Truck Electrical Units and Components

UNIT OVERVIEW

This unit is about removing and replacing units and components previously identified as faulty or damaged or where the customer has requested replacements. It is also about evaluating the performance of replaced units and components.

The units and components concerned are those outside those replaced as part of normal routine vehicle maintenance.

SCOPE OF THIS UNIT:

All of the items listed below form part of this National Occupational Standard

1. Equipment is:

a. hand tools

b. special workshop tools c. general workshop equipment d. electrical meters

e. electronic diagnostic tools f. on board diagnostic tools

2. Testing methods are:

a. visual b. aural c. functional d. measurement

3. Electrical units and components are for:

a. lighting systems b. accelerator systems c. electric warning devices d. direction control devices e. hydraulic systems

f. speed governing devices g. starting and generator systems h. charging systems

i. traction control systems j. axle stability systems

k. electric drive, hydraulic and steering motors l. monitoring and instrumentation systems m. traction battery systems

(8)

ESSENTIAL KNOWLEDGE You need to understand:

Legislative and organisational requirements and procedures 1. the legal requirements relating to lift trucks

2. the health and safety legislation and workplace procedures relevant to lift truck maintenance and repair activities including PPE.

3. your workplace procedures for

 recording removal and replacement information

 the referral of problems

 reporting delays to the completion of work

4. the importance and purpose of recording removal and replacement activities

5. the importance of working to agreed timescales and keeping others informed of progress.

6. the relationship between time and costs.

7. the importance of reporting anticipated delays to the relevant person(s) in authority promptly.

Use of technical information

8. how to find, interpret and use sources of information applicable to electrical unit and component removal and replacement.

9. the importance of using the correct sources of technical information 10. the purpose of and how to use identification codes

Electrical auxiliary system operation and construction

11. how electrical auxiliary units and components are constructed, removed and replaced for the classification of lift truck worked upon.

12. how electrical auxiliary units and components operate for the classification of lift truck worked upon.

Equipment

13. how to prepare, test and use all the removal and replacement equipment required.

Electrical and electronic principles

14. lift truck earthing methods.

15. electrical and electronic principles associated with electrical systems, including types of sensors and actuators, their application and operation

16. types of circuit protection and why these are necessary.

17. electrical safety procedures.

18. how warning and charging and starter circuits work 19. electrical units,terms and schematics

20. electronic control system principles

21 battery principles and safety working practices Electrical unit and component removal and replacement

22. how to remove and replace electrical units and components for the lift truck worked upon.

23. how to test and evaluate the performance of replacement electrical units and components and the reassembled system against the lift truck operating specifications and any legal

(9)

24. the relationship between testing methods and the electrical units and components replaced – the use of appropriate test methods.

25. the manufacturer’s specification for the type and quality of electrical units and components to be used.

26. how to work safely avoiding damage to other lift truck systems, components and units

and contact with leakage and hazardous substances relating to yourself and the environment

PERFORMANCE OBJECTIVES To be competent you must:

a. wear suitable personal protective equipment throughout all removal and replacement activities.

b. support your removal and replacement activities by reviewing:

 lift truck technical data

 removal and replacement procedures

 legal requirements.

c. prepare, test and use all the equipment required following manufacturers’ instructions.

d. carry out all removal and replacement activities following;

 manufacturers’ instructions

 your workplace procedures

 health and safety requirements.

e. you work in a way which minimises the risk of:

 damage to other lift truck systems

 damage to other lift truck components and units

 injury to yourself and others

 contact with hazardous substances.

 instability when working on the lift truck

f. ensure replaced electrical units and components conform to the lift truck operating specification and any legal requirements.

g. record and report any additional faults you notice during the course of your work promptly.

h. use suitable testing methods to evaluate the performance of the reassembled system

i. ensure the reassembled system performs to the lift truck operating specification and meets any legal requirements prior to return to the customer.

j. ensure your records are accurate, complete and passed to the relevant person(s) promptly in the format required.

k. complete all removal and replacement activities within the agreed timescale.

l. report any expected delays in completion to the relevant person(s) in authority promptly

Unit LT04 – Remove and Replace Lift Truck Mechanical Handling and Chassis Units and Components

UNIT OVERVIEW

(10)

This unit is about removing and replacing units and components where dismantling and re-assembly of mechanical handling and chassis systems is required. It is also about evaluating the performance of replaced units and components. The units and components concerned are those outside those replaced as part of normal routine, lift truck maintenance (servicing) activities.

SCOPE OF THIS UNIT:

All of the items listed below form part of this National Occupational Standard

1. Equipment is:

a. hand tools

b. special workshop tools c. general workshop equipment d. electrical testing equipment e. lifting and slinging equipment

2. Testing methods are:

a. visual b. aural c. functional d. measurement

3. Units and components are:

a. mechanical b. electrical c. hydraulic

4. Mechanical handling and chassis systems are a. mast, carriage and attachment assemblies b. hydraulic units and components

c steering systems d. braking systems

ESSENTIAL KNOWLEDGE You need to know and understand:

Legislative and organisational requirements and procedures

1. the legal requirements relating to the lift truck

2. the health and safety legislation and workplace procedures relevant to lift truck removal and replacement activities including PPE.

(11)

3. your workplace procedures for

 recording removal and replacement information

 the referral of problems

 reporting delays to the completion of work

4. the importance and purpose of recording removal and replacement activities

5. the importance of working to agreed timescales and keeping others informed of progress.

6. the relationship between time and costs.

7. the importance of reporting anticipated delays to the relevant person(s) in authority promptly.

Use of technical information

8. how to find, interpret and use sources of information applicable to unit and component removal and replacement within mechanical handling and chassis systems.

9. the importance of using the correct sources of technical information 10. how to use parts lists and identification codes

Electrical and electronic principles

11. lift truck earthing methods.

12. electrical and electronic principles associated with chassis and mechanical handling systems, including types of sensors and actuators, their application and operation.

13. types of circuit protection and why these are necessary.

14. electrical safety procedures.

15. electricalunits, terms and schematics 16. electronic control system principles.

Hydraulics and Hydraulic Principles

17. how hydraulic lift truck systems operate including rams, pumps, motors and valve blocks 18. how to inspect hydraulic systems and components to ensure they fall within

manufacturer’sspecifications

19. how to remove and replace hydraulic system components 20. hydraulic schematics and symbols

21. health and Safety risks associated with hydraulic systems

Mechanical handling and chassis system operation and construction

20. how mechanical handling and chassis systems are constructed, dismantled and reassembled for the classification of lift truck worked upon.

21. how mechanical handling and chassis systems operate for the classification of lift truck worked upon.

Equipment

22. how to prepare, inspect and use all the removal and replacement equipment required.

23. the regulations relating to lifting and slinging equipment

Mechanical handling and chassis system unit and component removal and replacement

(12)

24. how to remove and replace mechanical handling and chassis system mechanical, electrical and hydraulic units and components for the classification of lift truck worked upon.

25. how to file, fit, tap, thread, cut and drill plastics and metals.

26. how to select and use gaskets, sealants, seals, fittings and fasteners.

27. how to test and evaluate the performance of replacement mechanical handling and chassis system units and components and the reassembled system against the lift truck operating specifications and any legal requirements.

28. the relationship between testing methods and the mechanical handling and chassis system units and components replaced – the use of appropriate test methods.

29. when replacement units and components must meet the original equipment specification (OES) for warranty or other requirements.

30. how to work safely avoiding damage to other lift truck systems, components and units

and contact with leakage and hazardous substances relating to yourself and the environment

PERFORMANCE OBJECTIVES To be competent you must:

a. wear suitable personal protective equipment throughout all removal and replacement activities.

b. support your removal and replacement activities by reviewing

 lift truck technical data

 removal and replacement procedures

 legal requirements.

c. prepare, inspect and use all the equipment required following manufacturers’ instructions.

d. carry out all removal and replacement activities following;

 manufacturers’ instructions

 your workplace procedures

 health and safety requirements.

e. work in a way which minimises the risk of:

 damage to other lift truck systems

 damage to other lift truck components and units

 injury to yourself and others

 contact with hazardous substances.

 instability when working on the lift truck

f. ensure replaced mechanical handling and chassis units and components conform to the lift truck operating specification and any legal requirements.

g. record and report any additional faults you notice during the course of your work promptly.

h. use suitable testing methods to evaluate the performance of the reassembled system i. ensure the reassembled mechanical handling and chassis system performs to the lift truck

operating specification and meets any legal requirements prior to return to the customer.

j. ensure your records are accurate, complete and passed to the relevant person(s) promptly in the format required.

k. complete all removal and replacement activities within the agreed timescale.

l. report any expected delays in completion to the relevant person(s) in authority promptly

(13)

Unit LT05 – Inspect Lift Trucks using Prescribed Inspection Methods

UNIT OVERVIEW

This unit is about carrying out a range of inspections on lift trucks using a variety of prescribed testing and inspection methods.

SCOPE OF THIS UNIT:

All of the items listed below form part of this National Occupational Standard

1. Lift truck inspections are:

a. pre-delivery inspection b. re-work

c. final inspection d. pre hire

e. off hire

f. maintenance Inspection

2. Test methods are:

a. visual b. aural c. functional d. measurement

3. Examples of Equipment Includes:

Appropriate test equipment to correctly confirm the functionality of the system that you are inspecting; this may include measuring equipment, specialist diagnostic equipment or any type of tool required.

4. Future action:

Recommended additional work with relation to safety critical items; repairing and replacing.

ESSENTIAL KNOWLEDGE You need to know and understand:

Legislative and organisational requirements and procedures

1. the health and safety legislation and workplace procedures relevant to lift truck inspection activities including PPE

2. the health and safety legislation relevant to the inspections described in the Scoping Statement for this unit.

3. your workplace procedures for:

recording lift truck inspections and any variations from acceptable tolerances

 the referral of problems

(14)

 reporting delays to the completion of work

4. the importance of making accurate records of the results of your tests and inspections and interpreting them correctly.

5. the importance of working to agreed timescales and keeping others informed of progress.

6. the relationship between time and costs.

7. the importance of reporting anticipated delays to the relevant person(s) in authority promptly.

Sources of information

8. how to find, interpret and use technical and product specific information.

9. the importance of using technical information to perform your inspection and testing of lift trucks in accordance to LOLER and PUWER legislation.

Testing methods and the conduct of Inspections

10. your responsibility and accountability when carrying out an inspection.

11. how lift truck systems operate (including the power plant area, transmission area, driveline area, mechanical handling and chassis area and electrical area). The operational tolerances for the lift truck(s) on which you are working

12. how to follow procedures to carry out the systematic inspections described in the scoping statement above.

13. how to confirm the correct operation of the lift truck systems and lift truck condition.

14. how to compare test and inspection results against lift truck specifications and legal requirements.

15. how to record test and inspection results in the format required.

16. how to make recommendations based upon the results of your inspections.

17. the implications of failing to carry out lift truck inspection activities correctly.

18. how to correctly complete an inspection report

19 the implications of signing workplace documentation and lift truck records

PERFORMANCE OBJECTIVES To be competent you must:

a. use suitable personal protective equipment throughout all Lift Truck inspection activities.

b. use suitable sources of technical information to support your Lift Truck inspection activities.

c. carry out systematic lift truck inspections following:

 manufacturer’s approved procedures

 Recognised repair methods

 health and safety requirements.

 prescribed documentation

d. confirm all systems and components inspected, function correctly following the manufacturer’s specifications.

e. ensure your comparison of the lift truck against specification accurately identifies any:

 differences from the lift truck specification

 lift truck appearance and condition faults

f. work in a way which minimises the risk of damage to the lift truck and its systems, other people and their property.

g. make suitable recommendations for future action based upon the results of your tests and inspections.

(15)

h. ensure your records are accurate, complete and passed to the relevant person(s) in authority promptly in the format required. (This includes all lift truck related paperwork).

i. complete all lift truck inspection activities within the agreed timescale and to specification.

j. report any anticipated delays in completion to the relevant person(s) in authority promptly.

Unit LT06 – Inspect Lift Trucks – thorough examination (PUWER and LOLER)

UNIT OVERVIEW

This unit is about carrying out a range of inspections of lift trucks using a variety of testing methods and equipment.

SCOPE OF THIS UNIT:

All of the items listed below form part of this National Occupational Standard

(16)

1. Lift truck inspections are:

a. thorough examination and test procedure b. LOLER

c. PUWER

2. Test methods are:

a. visual b. aural c. functional d. measurement

3. Equipment:

a. lift chain gauges b. fork arm gauges c. torque setting

d. specialist diagnostic equipment

e. measuring equipment (e. g vernier callipers, micrometer, feeler blades etc.)

ESSENTIAL KNOWLEDGE You need to know and understand:

Legislative and organisational requirements and procedures

1. the health and safety legislation and workplace procedures relevant to lift truck inspection activities including PPE the health and safety

2. the legislation relevant to the types of lift truck inspections described in the Scoping Statement for this unit.

3. your workplace procedures for

recording lift truck inspections and any variations from acceptable tolerances

 the referral of problems

 reporting delays to the completion of work

4. the importance of making accurate records of the results of your tests and inspections and interpreting them correctly.

5. the importance of working to agreed timescales and keeping others informed of progress.

6. the relationship between time, costs and profitability.

7. the importance of reporting anticipated delays to the relevant person(s) in authority promptly.

Sources of information

8. how to find, interpret and use technical information .

9. the importance of using technical information to perform your inspection and testing of lift trucks.

Testing methods and the conduct of Inspections

10. how lift truck systems operate (including the power plant area, transmission area, driveline, mechanical handling and chassis area and electrical area). The operational tolerances for the vehicle(s) on which you are working.

(17)

11. how to follow procedures and processes to enable a logical and systematic inspection of lift trucks.

12. how to test the operation and tolerances of lift truck systems and lift truck condition.

13. how to compare test and inspection results against lift truck specifications and legal requirements.

14. how to record test and inspection results in the format required.

15. how to make recommendations based upon the results of your inspections.

16. the full implications of failing to carry out an inspection correctly.

17. the implications of signing workplace documentation and vehicle records.

PERFORMANCE OBJECTIVES To be competent you must:

a. use suitable personal protective equipment throughout all lift truck inspection activities.

b. use suitable sources of technical information to support your lift truck inspection activities.

c. where necessary, confirm that equipment has been calibrated to meet manufacturers’ and legal requirements.

d. carry out systematic lift truck inspections following:

 your workplace procedures

 health and safety requirements.

e. conduct all lift truck testing following:

 the manufacturer’s instructions

the recognised test methods

 your workplace procedures

 health and safety requirements.

f. ensure your comparison of the lift truck against specification accurately identifies any:

 differences from the lift truck specification

 lift truck appearance and condition faults

 non-compliance with statutory requirements

g. work in a way which minimises the risk of damage to the lift truck and its systems, other people and their property.

h. make suitable recommendations for future action based upon the results of your tests and inspections.

i. ensure your records are accurate, complete and passed to the relevant person(s) promptly in the format required.

j. complete all inspection activities within the agreed timescale and to specification.

k. report any anticipated delays in completion to the relevant person(s) in authority promptly.

(18)

Unit LT07 – Diagnose and Rectify Lift Truck Power Plant Units and Component Faults

UNIT OVERVIEW

This unit is about diagnosing and rectifying faults occurring in the lift truck Power Plant Units, mechanical, electrical, hydraulic and fluid systems.

SCOPE OF THIS UNIT:

All of the items listed below form part of this National Occupational Standard 1. Faults occur within:

(19)

a. the Power Plant mechanical system

b. the Power Plant electrical and electronic systems c. the Power Plant hydraulic and fluid systems d. the Power Plant fuel systems

2. Diagnostic methods are:

a. measurement b. functional testing

c. electrical and electronic systems testing

3. Diagnostic Testing is defined as:

a. Verify the fault

b. Collect further information c. Evaluate the evidence

d. Carry out further tests in a logical sequence e. Rectify the problem

f. Check all systems

4. Equipment is:

a. diagnostic and rectification equipment for mechanical systems b. diagnostic and rectification equipment for electrical systems

c. diagnostic and rectification equipment for hydraulic and fluid systems d. specialist repair tools

e. general workshop equipment 5. Rectification activities are defined as:

A suitable repair, replacement, re-coding or re-programming that rectifies the fault(s) identified from the diagnostic activities carried out.

ESSENTIAL KNOWLEDGE You need to know and understand:

Legislative and organisational requirements and procedures

1. the health and safety legislation and workplace procedures relevant to workshop practices and personal and lift truck protection when diagnosing and rectifying engine faults.

2. legal requirements relating to the lift truck 3. your workplace procedures for

 recording fault location and correction activities

 reporting the results of tests.

 the referral of problems

(20)

 reporting delays to the completion of work

4. the importance of working to recognised diagnostic and rectification procedures and processes and obtaining the correct information for diagnostic and rectification activities to proceed 5. the importance , and purpose of recording diagnostic and rectification activities.

6. the importance of working to agreed timescales and keeping others informed of progress.

7. the relationship between time, costs and profitability.

8. the importance of reporting anticipated delays to the relevant person(s) in authority promptly.

Electrical and electronic principles

9. electrical and electronic principles associated with engine systems, including types of sensors and actuators, their application and operation

10. how electrical and electronic systems operate, including electrical components, electrical inputs, outputs, voltages, digital and fibre optics principles.

11. the interaction between electrical, electronic and mechanical components within lift truck power plant systems

12. how power plant electrical systems interlink and interact, including multiplexing 13. electrical units, terms and schematics

14. electrical safety procedures.

Use of diagnostic and rectification equipment

15. how to prepare and test the accuracy of diagnostic testing equipment.

16. how to use diagnostic and rectification equipment for mechanical, electrical, electronic, hydraulic and fluid systems; specialist repair tools and general workshop equipment Engine electrical faults, their diagnosis and correction

17. how power plant mechanical, electrical, electronic, hydraulic and fluid and fuel systems are constructed, operate, dismantled and reassembled.

18. the types and causes of power plant mechanical, electrical, electronic and hydraulic and fluid system, component and unit faults and failures.

19. power plant mechanical, electrical, electronic and hydraulic and fluid component and unit replacement procedures, the circumstances which will necessitate replacement and other possible courses of action.

20. how to find, interpret and use sources of information on power plant electrical and electronic operating specifications, diagnostic test procedures, repair procedures and legal requirements.

21. lift truck operating specifications for limits, fits and tolerances relating to lift truck power plant mechanical, electrical, electronic and hydraulic and fluid systems for the type/class of lift truck on which you work.

22. how to select the most appropriate diagnostic testing method for the symptoms presented.

23. how to carry out systematic diagnostic testing of power plant mechanical, electrical and electronic, hydraulic and fluid systems using prescribed processes or formats.

24. how to assess the condition of mechanical, electrical, electronic, hydraulic and fluid components and units.

25. how to interpret test results and lift truck data in order to identify the location and cause of power plant system faults.

26. how to carry out the rectification activities in order to correct faults in the power plant mechanical, electrical, electronic and hydraulic and fluid systems.

27. the relationship between test methodology and the faults repaired – the use of appropriate testing methods

28. how to make cost effective recommendations for rectification.

(21)

PERFORMANCE OBJECTIVES To be competent you must:

a. wear suitable personal protective equipment and protect other systems when using diagnostic methods and carrying out rectification activities.

b. support the identification of faults, by reviewing lift truck:

 technical data

 diagnostic test procedures.

c. prepare, connect and test all the required equipment following manufacturers' instructions prior to use.

d. use diagnostic methods which are relevant to the symptoms presented.

e. collect sufficient diagnostic information in a systematic way to enable an accurate diagnosis of engine system faults.

f. identify and record any system deviation from acceptable limits accurately.

g. ensure your assessment of dismantled sub-assemblies, components and units identifies their condition and suitability for repair or replacement, accurately.

h. inform the relevant person(s) promptly where repairs are uneconomic or unsatisfactory to perform.

i. use the equipment required, correctly and safely throughout all rectification activities.

j. carry out all diagnostic and rectification activities following:

 manufacturers’ instructions

 recognised researched repair methods(see guidance document)

 your workplace procedures

 health and safety requirements k. work in a way which minimises the risk of :

 damage to other lift truck systems

 damage to other components and units

 injury to yourself or others

 contact with hazardous substances.

l. ensure all repaired and replaced components and units conform to the lift truck operating specification and any legal requirements.

m. when necessary, adjust components and units correctly to ensure that they operate to meet system requirements.

n. record and report any additional faults you notice during the course of work promptly.

o. use testing methods which are suitable for assessing the performance of the system rectified.

p. ensure the power plant system rectified performs to the lift truck operating specification and any legal requirements prior to return to the customer.

q. ensure your records are accurate, complete and passed to the relevant person(s) promptly in the format required.

r. complete all system diagnostic activities within the agreed timescale.

s. report any anticipated delays in completion to the relevant person(s) in authority promptly.

(22)

Unit LT08 – Diagnose and Rectify Lift Truck Mechanical Handling and Chassis System Faults

UNIT OVERVIEW

This unit is about diagnosing and rectifying faults occurring within lift truck mechanical handling, steering and braking systems.

SCOPE OF THIS UNIT:

All of the items listed below form part of this National Occupational Standard

1. Mechanical handling and Chassis systems are:

a. mast and carriage assemblies b. steering

c. braking

d. axle stability systems e. hydraulic systems

2. Diagnostic methods are:

a. measurement b. functional testing

c. electrical and electronic systems testing

3. Diagnostic Testing is defined as:

g. Verify the fault

h. Collect further information i. Evaluate the evidence

j. Carry out further tests in a logical sequence k. Rectify the problem

l. Check all systems

4. Equipment is:

a. diagnostic and rectification equipment for mechanical handling and chassis mechanical systems

b. diagnostic and rectification equipment for mechanical handling and chassis electrical systems

c. diagnostic and rectification equipment for mechanical handling and chassis hydraulic and fluid systems

d. specialist repair tools

e. general workshop equipment

5. Faults are:

a. mechanical

b. electrical and electronic c. hydraulic and fluid

(23)

5. Rectification activities are defined as:

A suitable repair or replacement that rectifies the fault(s) identified form the diagnostic activities carried out.

ESSENTIAL KNOWLEDGE You need to understand:

Legislative and organisational requirements and procedures

1. the health and safety legislation and workplace procedures relevant to lift truck diagnostic and repair activities including PPE.

2. legal requirements relating to the lift truck 3. your workplace procedures for

 recording fault location and correction activities

 reporting the results of tests.

 the referral of problems

 reporting delays to the completion of work

4. the importance of working to recognised diagnostic and rectification procedures and processes and obtaining the correct information for diagnostic and rectification activities to proceed 5. the importance and purpose of recording diagnostic and rectification activities

6. the importance of working to agreed timescales and keeping others informed of progress.

7. the relationship between time, costs and profitability.

8. the importance of reporting anticipated delays to the relevant person(s) in authority promptly.

Electrical and electronic principles

9. electrical and electronic principles associated with mechanical handling and lift truck chassis systems, including types of sensors and actuators, their application and operation.

10. how electrical and electronic mechanical handling and lift truck chassis systems operate, including electrical component function, motor controls, electrical inputs, outputs, voltages , digital and fibre optics principles.

11. the interaction between electrical, electronic and mechanical components within mechanical handling and lift truck chassis systems.

12. how mechanical handling and lift truck chassis systems interlink and interact, including multiplexing

13. electrical units, terms and schematics 14. electrical safety procedures.

Hydraulics and Hydraulic Principles

15. how hydraulic lift truck systems operate including rams, pumps, motors and valve blocks 16. how to inspect and test hydraulic systems and components

17. how to remove, strip and re-seal hydraulic system components

Use of diagnostic and rectification equipment

18. how to prepare and test the accuracy of diagnostic testing equipment.

(24)

19. how to use diagnostic and rectification equipment for mechanical handling and chassis mechanical, electrical, hydraulic and fluid systems, specialist repair tools and general workshop equipment

Mechanical handling and Chassis faults, their diagnosis and correction

20. how mechanical handling and chassis mechanical, electrical, electronic and hydraulic and fluid systems are constructed, dismantled, reassembled and operate.

21. the types and causes of mechanical handling and chassis mechanical, electrical, electronic and hydraulic and fluid system, component and unit faults and failures

22 mechanical handling and chassis mechanical, electrical and hydraulic and fluid component and unit replacement procedures, the circumstances which will necessitate replacement and other possible courses of action.

23. how to find, interpret and use sources of information on chassis electrical operating specifications, diagnostic test procedures, repair procedures and legal requirements.

24. lift truck operating specifications for limits, fits, pressures and tolerances relating to mechanical handling and chassis mechanical, electrical, electronic and hydraulic and fluid systems for the lift truck(s) on which you work.

25. how to select the most appropriate diagnostic testing method for the symptoms presented.

26. how to carry out systematic diagnostic testing of mechanical handling and chassis mechanical, electrical and electronic, hydraulic and fluid systems using a prescribed process or format . 27. how to assess the condition evident within mechanical handling and chassis mechanical,

electrical, electronic, hydraulic and fluid components and units.

28. how to interpret test results and lift truck data in order to identify the location and cause of lift truck system faults.

29. how to carry out the rectification activities listed in the Scoping Statement for this unit in order to correct faults in the mechanical handling and chassis mechanical, electrical, electronic and hydraulic and fluid systems.

30. the relationship between test methodology and the faults repaired – the use of appropriate testing methods

31. how to make cost effective recommendations for rectification.

PERFORMANCE OBJECTIVES To be competent you must:

a. use suitable personal protective equipment throughout all lift truck diagnostic and repair activities.

b. support the identification of faults, by reviewing lift truck:

 technical data

 diagnostic test procedures.

c. prepare, connect and test all the required equipment following manufacturers' instructions prior to use.

d. use diagnostic methods which are relevant to the symptoms presented.

e. collect diagnostic information in a systematic way relevant to the diagnostic methods used.

f. collect sufficient diagnostic information to enable an accurate diagnosis of chassis system faults.

g. identify and record any system deviation from acceptable limits accurately.

h. ensure your assessment of dismantled sub-assemblies, components and units identifies their condition and suitability for repair or replacement, accurately.

i. inform the relevant person(s) promptly where repairs are uneconomic or unsatisfactory to perform.

(25)

j. use the equipment required, correctly and safely throughout all rectification activities.

k. carry out all rectification activities following:

 manufacturers' instructions

 your workplace procedures

 health and safety requirements.

l. work in a way which minimises the risk of :

 damage to other lift truck systems

 damage to other components and units

 injury to yourself and others

 contact with hazardous substances.

 Instability when working on a lift truck

m. ensure all repaired and replaced components and units conform to the lift truck operating specification and any legal requirements.

n. when necessary, adjust components and units correctly to ensure that they operate to meet system requirements.

o. record and report any additional faults you notice during the course of work promptly.

p. use testing methods which are suitable for assessing the performance of the system rectified.

q. ensure the mechanical handling and chassis system rectified performs to the lift truck operating specification and any legal requirements prior to return to the customer.

r. ensure your records are accurate, complete and passed to the relevant person(s) promptly in the format required.

s. complete all system diagnostic activities within the agreed timescale.

t. report any anticipated delays in completion to the relevant person(s)in authority promptly.

Unit LT12 – Remove and Replace Lift Truck Driveline Units and Components

UNIT OVERVIEW

This unit is about removing and replacing units and components where dismantling and re-assembly of transmission and driveline systems is required. It is also about evaluating the performance of replaced units and components. The units and components concerned are those outside those replaced as part of normal routine, lift truck maintenance (servicing) activities.

SCOPE OF THIS UNIT:

All of the items listed below form part of this National Occupational Standard

1. Equipment is:

a. hand tools

b. special workshop tools c. general workshop equipment d. electrical testing equipment

(26)

2. Testing methods are:

a. visual b. aural c. Functional d. measurement

3. Units and components are:

a. mechanical b. electrical c. hydraulic

4. Transmission and driveline systems are:

a. powershift units b. hubs and bearings c. driveline shafts e. torque converters f. control valves g. final drive units h. motor control units i. hydrostatic

j. generator

ESSENTIAL KNOWLEDGE You need to understand:

Legislative and organisational requirements and procedures

1. the legal requirements relating to the lift truck (including road safety requirements).

2. the health and safety legislation and workplace procedures relevant to lift truck maintenance activities and personal and lift truck protection.

3. your workplace procedures for

 recording removal and replacement information

 the referral of problems

 reporting delays to the completion of work

4. the importance and purpose of recording removal and replacement activities

5. the importance of working to agreed timescales and keeping others informed of progress.

6. the relationship between time and costs.

7. the importance of reporting anticipated delays to the relevant person(s) in authority promptly.

Use of technical information

8. how to find, interpret and use sources of information applicable to unit and component removal and replacement within transmission and driveline systems.

9. the importance of using the correct sources of technical information 10. the purpose of and how to use identification codes.

Electrical and electronic principles 11. lift truck earthing methods.

(27)

12. electrical and electronic principles associated with transmission and driveline systems, including types of sensors and actuators, their application and operation.

13. types of circuit protection and why these are necessary.

14. electrical safety procedures.

15. electrical units, terms and schematics 16. electronic control system principles.

Transmission and driveline system operation and construction

17. how transmission and driveline systems and their related units and components are constructed, removed and replaced for the classification of lift truck worked upon.

18. how transmission and driveline systems and their related units and components operate for the classification of lift truck worked upon.

19. transmission schematic symbols and diagrams Equipment

20. how to prepare,inspect and use all the removal and replacement equipment required.

Transmission and driveline system unit and component removal and replacement 21. how to remove and replace transmission and driveline system mechanical, electrical and

hydraulic units and components for the classification of lift truck worked upon.

22. how to file, fit, tap, thread, cut and drill plastics and metals.

23. how to select and use gaskets, sealants, seals, fittings and fasteners.

24. how to test and evaluate the performance of replacement transmission and driveline system units and components and the reassembled system against the lift truck operating specifications and any legal requirements.

25. the relationship between testing methods and the transmission system units and components replaced and –. the use of appropriate test methods

26. the relationship between testing methods and the driveline system units and components replaced

26. when replacement units and components must meet the original equipment specification (OES) for warranty or other requirements.

27. how to work safely avoiding damage to other lift truck systems, components and units and contact with leakage and hazardous substances. relating to yourself and the environment

PERFORMANCE OBJECTIVES To be competent you must:

a. wear suitable personal protective equipment throughout all removal and replacement activities.

b. support your removal and replacement activities by reviewing

 lift truck technical data

 removal and replacement procedures

 legal requirements.

c. prepare, set up, test and use all the equipment required following manufacturers’ instructions.

d. carry out all removal and replacement activities following;

 manufacturers’ instructions

 recognised repair methods

 health and safety requirements.

e. work in a way which minimises the risk of:

 damage to other lift truck systems

(28)

 damage to other lift truck components and units

 injury to yourself and others

 contact with hazardous substances.

 damage to your working environment.

 instability when working on the lift truck

f. ensure replaced driveline units and components conform to the lift truck operating specification and any legal requirements.

g. record and report any additional faults you notice during the course of your work promptly.

h. use suitable testing methods to evaluate the performance of the reassembled system

i. ensure the reassembled driveline system performs to the lift truck operating specification and meets any legal requirements prior to return to the customer.

j. ensure the reassembled transmission system performs to the lift truck operating specification and meets any legal requirements prior to return to the customer.

k. ensure your records are accurate, complete and passed to the relevant person(s) in authority promptly in the format required.

l. complete all removal and replacement activities within the agreed timescale.

m. report any expected delays in completion to the relevant person(s) in authority promptly

Unit LT13 – Diagnose and Rectify Lift Truck Transmission and Driveline System Faults

UNIT OVERVIEW

This unit is about diagnosing and rectifying faults occurring within lift truck gearboxes (hydrostatic, automatic or powershift types), hubs and bearings, driveline shafts, differentials and final drive units

SCOPE OF THIS UNIT:

All of the items listed below form part of this National Occupational Standard

1. Transmission and driveline systems are:

a. gearbox

b. hubs and bearings c. driveline shafts d. torque converter e. final drive assembly

2. Diagnostic methods are:

a. measurement b. functional testing c. pressure testing

d. electrical and electronic systems testing

3. Diagnostic Testing is defined as:

a. verify the fault

b. collect further information c. evaluate the evidence

(29)

e. rectify the problem f. check all systems

4. Equipment is:

a. diagnostic and rectification equipment for transmission mechanical systems

b. diagnostic and rectification equipment for transmission electrical systems

c. diagnostic and rectification equipment for transmission hydraulic and fluid systems

d. specialist repair tools

e. general workshop equipment

5. Faults are:

a. mechanical

b. electrical and electronic c. hydraulic and fluid

6. Rectification activities are defined as:

A suitable repair or replacement that rectifies the fault(s) identified from the diagnostic activities carried out.

ESSENTIAL KNOWLEDGE You need to understand:

Legislative and organisational requirements and procedures

1. the health and safety legislation and workplace procedures relevant to diagnosing and rectifying driveline faults including PPE.

2. legal requirements relating to the lift truck 3. your workplace procedures for

 recording fault location and correction activities

 reporting the results of tests.

 the referral of problems

 reporting delays to the completion of work

4. the importance of working to recognised diagnostic procedures and processes and obtaining the correct information for diagnostic activities to proceed

5. the importance and purpose of recording diagnostic and rectification activities.

6. the importance of working to agreed timescales and keeping others informed of progress.

7. the relationship between time, costs and profitability.

8. the importance of reporting anticipated delays to the relevant person(s) in authority promptly.

Electrical and electronic principles

9. electrical and electronic principles associated with transmission and driveline systems, including types of sensors and actuators, their application and operation.

10. how electrical and electronic transmission and driveline systems operate, including electrical component function, electrical inputs, outputs, voltages and oscilloscope patterns, digital and fibre optics principles.

11. the interaction between electrical, electronic and mechanical components within lift truck transmission and driveline systems.

(30)

12. how transmission and driveline electrical systems interlink and interact, including multiplexing 13. electric, units, terms and schematics

14. electrical safety procedures.

Use of diagnostic and rectification equipment

15. how to prepare and test the accuracy of diagnostic testing equipment.

16. how to use diagnostic and rectification equipment for transmission and driveline mechanical, electrical, hydraulic and fluid systems, specialist repair tools and general workshop equipment

Transmission and driveline faults, their diagnosis and correction

17. how transmission and driveline mechanical, electrical, electronic and hydraulic and fluid systems are constructed, dismantled, reassembled and operate.

18. the types and causes of transmission and driveline mechanical, electrical, electronic and hydraulic and fluid system, component and unit faults and failures

19. transmission and driveline mechanical, electrical and hydraulic and fluid component and unit replacement procedures, the circumstances which will necessitate replacement and other possible courses of action.

20. how to find, interpret and use sources of information on transmission and driveline electrical operating specifications, diagnostic test procedures, repair procedures and legal requirements.

21. lift truck operating specifications for limits, fits and tolerances relating to transmission and driveline mechanical, electrical, electronic and hydraulic and fluid systems for the lift truck(s) on which you work.

22. how to select the most appropriate diagnostic testing method for the symptoms presented.

23. how to carry out systematic diagnostic testing of transmission and driveline mechanical, electrical and electronic, hydraulic and fluid systems using a prescribed process or format.

24. how to assess the condition evident within transmission and driveline mechanical, electrical, electronic, hydraulic and fluid components and units.

25. how to interpret test results and lift truck data in order to identify the location and cause of lift truck system faults.

26. how to carry out the rectification activities listed in the Scoping Statement for this unit in order to correct faults in the transmission and driveline mechanical, electrical, electronic and hydraulic and fluid systems.

27. the relationship between test methodology and the faults repaired – the use of appropriate testing methods

28. how to make cost effective recommendations for rectification.

PERFORMANCE OBJECTIVES To be competent you must:

a. wear suitable personal protective equipment throughout all diagnostic methods and rectification activities.

b. support the identification of faults, by reviewing lift truck:

 technical data

 diagnostic test procedures.

(31)

c. prepare, connect and test all the required equipment following manufacturers' instructions prior to use.

d. use diagnostic methods which are relevant to the symptoms presented.

e. collect diagnostic information in a systematic way relevant to the diagnostic methods used.

f. collect sufficient diagnostic information to enable an accurate diagnosis of transmission and driveline system faults.

g. identify and record any system deviation from acceptable limits accurately.

h. ensure your assessment of dismantled sub-assemblies, components and units identifies their condition and suitability for repair or replacement, accurately.

i. inform the relevant person(s) promptly where repairs are uneconomic or unsatisfactory to perform.

j. use the equipment required, correctly and safely throughout all rectification activities.

k. carry out all rectification activities following:

 manufacturers' instructions

 your workplace procedures

 health and safety requirements.

l. work in a way which minimises the risk of :

 damage to other lift truck systems

 damage to other components and units

 injury to yourself and others

 contact with hazardous substances.

 Instability when working on the lift truck

m. ensure all repaired and replaced components and units conform to the lift truck operating specification and any legal requirements.

n. when necessary, adjust components and units correctly to ensure that they operate to meet system requirements.

o. record and report any additional faults you notice during the course of work promptly.

p. use testing methods which are suitable for assessing the performance of the system rectified.

q. ensure the transmission and driveline system rectified performs to the lift truck operating specification and any legal requirements prior to return to the customer.

r. ensure your records are accurate, complete and passed to the relevant person(s) promptly in the format required.

s. complete all system diagnostic activities within the agreed timescale.

t. report any anticipated delays in completion to the relevant person(s) in authority promptly.

(32)

LT 14 - Diagnose Lift Truck Faults Where no Prescribed Process or Format is Available

UNIT OVERVIEW

This unit is about devising and implementing strategies to diagnose faults when the application of standard manufacturer diagnostic procedures has failed to reveal the source and cause of problems.

You are also required to identify the best course of action to be taken to correct problems.

SCOPE OF THIS UNIT:

All of the items listed below form part of this National Occupational Standard

1. Causes of faults are:

a. mechanical b. electrical c. electronic d. hydraulic

2. Faults cover the:

a. power plant area

b. transmission and driveline area

c. mechanical handling and chassis system area d. electrical units and components area

3. Diagnostic methods are:

a. measurement b. functional testing

c. electrical and electronic systems testing

4. Diagnostic Testing is defined as:

a. verify the fault

b. collect further information c. evaluate the evidence

d. carry out further tests in a logical sequence e. rectify the problem

f. check all systems

(33)

5. Equipment is:

a. diagnostic and rectification equipment for mechanical systems b. diagnostic and rectification equipment for electrical systems

c. diagnostic and rectification equipment for hydraulic and fluid systems d. specialist repair tools

e. general workshop equipment 6. Rectification activities are defined as:

A suitable repair, replacement, re-coding or re-programming that rectifies the fault(s) identified from the diagnostic activities carried out.

You need to know and understand:

Legislative and organisational requirements and procedures

1. the health and safety legislation and workplace procedures relevant to workshop practices and relevant PPE for safe working with lift trucks

2. legal requirements relating to the lift truck.

3. your workplace procedures for

 recording fault location and correction activities

 reporting the results of tests.

 the referral of problems

 reporting delays to the completion of work

4. how to formulate and construct your own diagnostic procedures and processes in order for diagnostic activities to proceed

5. the importance and purpose of reporting diagnostic and rectification activities

6. the importance of working to agreed timescales and keeping others informed of progress.

7. the relationship between time, costs and profitability.

8. the importance of reporting anticipated delays to the relevant person(s) in authority promptly.

Electrical and electronic principles

9. electrical and electronic principles including types of sensors and actuators, their application and operation.

10. how electrical and electronic vehicle systems operate, including electrical component function, electrical inputs, outputs, voltages and oscilloscope patterns, digital and fibre optics principles.

11. the interaction between electrical, electronic and mechanical and hydraulic components within a vehicle.

12. how mechanical, hydraulic and electrical systems interlink and interact, including multiplexing 13. electric, units terms and schematics

14. electrical safety procedures.

Use of diagnostic and rectification equipment

15. how to prepare and test the accuracy of diagnostic testing equipment.

16. how to use diagnostic and rectification equipment for mechanical, electrical, hydraulic and fluid systems, specialist repair tools and general workshop equipment

Faults - diagnosis and correction

References

Related documents

The aim of this paper is to prove the existence of a pseudo-equilibrium in a financial economy with incomplete markets in which the agents may have nonordered preferences and

Maintenance personnel shall be completely familiar with the equipment operation, hydraulic and electrical schematics and maintenance procedures before attempting repair or..

This dissertation handles the taxonomically challenging subfamily Salicor- nioideae (Amaranthaceae in APG IV taxonomy), consisting of 11 genera and some one hundred species

When uncertain of part No please also state the fork lift truck type, fork lift truck No., engine No1. and gear

Instructional topics include common causes of forklift accidents, lift truck stability and safe driving procedures.. Pre- operational inspection, types of

To ensure that you get the correct parts, be certain whether your L-50 pallet truck is a standard model or one of the lowered- height models (MINI or

As such Sanchez and Davis (2014) advance that for Marxian economists, economic growth (as has been the case of Nigeria within the period under review) alone is insufficient to

2 boxed 1970's Matchbox Superfast diecast trucks, #15 Fork Lift Truck with #58 Faun Dump Truck. Yellow and black dump truck with hinged tipper trailer. Red fork Lift with yellow