Vitosoft 200 Vitodata 300 Vitocom 300 Vitocom 100

(1)

5822 225

G

B

Page

1 Vitocom 100, type FA1 1.1 Function description. . . 6

1.2 Pre−requisites. . . 8

1.3 Specification . . . 10

1.4 Standard delivery. . . 10

1.5 Application examples. . . 12

1.6 Hooking up additional functions. . . 14

2 Vitocom 300, type FA2 2.1 Function description. . . 16

2.7 Emergency power supply connection. . . 27

3 Vitocom 300, type FA3 and FI1 3.1 Function description. . . 28

3.4 Specification power supply unit . . . 34

3.5 Specification basic module. . . 35

3.6 Specification expansion module. . . 39

3.7 Accessories. . . 43

4 Vitodata 300 4.1 Function description. . . 48

5 Vitosoft 200, type LG1 and LG2 5.1 Function description. . . 52

5.3 Specification BUS de−coupler BEK. . . 56

5.5 Application examples . . . 58

6 Vitocom 200, type LNR 6.1 Function description. . . 60

6.4 Application examples . . . 65

7 Vitocom 200, type EIB 7.1 Function description. . . 66

8 Vitocom 200, type LON 8.1 Function description. . . 72

9 LON network 9.1 Connection of Viessmann equipment via LON. . . 76

V

itosoft 200

V

itocom 300

V

itodata 300

V

itocom 100

V

itocom 200

(2)

G

B

1.1 Function description

Introduction

The Viessmann communication interface Vitocom 100, type FA1, is used for remote messaging, monitoring and scanning for faults, as well as remote switching of heasting systems via the telephone network.

Configuration of Vitocom 100 using: H Telephone using multi−frequency

process (DTMF)

H D1/D2/E−Plus mobile ’phone H Vitodata 300

Using the integral modem, error messages are transferred via telephone systems to various communication services:

H Remote monitoring with Vitodata 300*1

H Fax

H D1/D2 mobile ’phone

Summary

Vitocom 100 provides the following functions:

H Remote monitoring and control of heating system via the telephone system.

H Remote interrogation of operating conditions or control conditions via the telephone system.

H Automatically generated messages to a fax machine, a D1/D2 mobile ‘phone via the public telephone network or via Vitodata 300 (heating or service contractor).

H Optional hook−up of additional functions, e.g. opening and closing window shutters or switching the domestic lighting on or off via the telephone system.

H Saving system descriptions, system−specific details and message texts.

Advantages

H Irregularities in the operation of heating systems can be recognised and notified as soon as first signs appear. This ensures higher operational safety.

H An automatic message regarding the cause of the error by the system guarantees rapid and specific troubleshooting.

H Heating programs can be changed for each heating circuit by remote control using the telephone system.

Energy savings can be conveniently achieved by changing heating programs at appropriate times. H Automatic initiation of service and

maintenance work.

*1_{SMS for E−Plus−Netz only via Vitodata 300.}

V

(3)

5822 225 G B Communication services Vitocom 100 Vitocom 100 Viessmann products Telephone network A C D E B

1.1 Function description

A Telephone with DTMF

B D1/D2/E−Plus*1_{mobile ’phone}

C Fax

D Control centre E Database server

with Vitodata 300 (internet)

V

(4)

G

B

1.2 Pre−requisites

On−site pre−requisites

Analogue telephone connection with H RJ11 socket

H TAE socket, code "6N" Heating systems with Vitotronic H Vitotronic 150, type KB1,

Vitotronic 200, type KW1 and KW2 or Vitotronic 300, type KW3

Heating system with Vitodens or Vitopend

H Vitodens 100, 200 or 300 with control units for weather−compensated operation

or

Vitopend 200 with control unit for weather−compensated operation

Heating system with Dekamatik H Dekamatik

Depending on the required function: H Connection cable with junction box for

control error notification.

Heating system with Viessmann Trimatik (from serial no. with index B or date of construction January 1998 onwards) H Viessmann Trimatik

Depending on the required function: H Connection cable with junction box for

control error notification

H Control module FT for changing the

heating program*1_.

Heating system with Viessmann

Trimatik*2_{(year of construction prior to}

January 1998) H Viessmann Trimatik,

part no. 7450 285, 7450 286, 7450 365 and 7450 367

Depending on the required function: H Programming unit as remote control

with wall−mounting frame for connecting one Vitocom 100 H Control module FT for changing the

heating program*1_.

Heating system with Viessmann

Trimatik*2_{(year of construction prior to}

January 1998)

H Viessmann TrimatikMC, part no. 7450 261A and 7450 263 or

H Viessmann TrimatikMC/B, part no. 7450 361

or

H Viessmann TrimatikMC/B2, part no. 7450 362 and 740 362A Depending on the required function: H Control module FT for changing the

heating program*1_.

Heating system with Eurola or Pendola H Eurola with EurolamatikOC

or

Pendola with control unit for weather−compensated operation In addition for Pendola:

H Adaptor (connection extension, part no. 7404 582).

Remote interrogation, remote switching H via the telephone system

using a telephone with the dual−tone multi−frequency (DTMF) method H via D1/D2/E−Plus mobile ’phone H via Vitodata 300 (internet).

Remote monitoring H via D1/D2 mobile ’phone H via Fax

H via Vitodata 300.

*1_{Not possible when using remote control.}

*2_{With on−site hook−up.}

V

(5)

5822 225 G B 145 A B C D Telephone network G F K H E 58 A B C D Telephone network F K G H E

1.2 Pre−requisites

Heating systems with Vitotronic 150, 200, 300, Vitodens 100, 200, 300 or Vitopend 200

C Fax

D Control centre

E Database server with Vitodata 300 (internet)

F Telephone connection G Control unit

H KM BUS cable K Vitocom 100

Heating systems with Dekamatik or Viessmann Trimatik

C Fax

D Control centre

E Database server with Vitodata 300 (internet)

F Telephone connection

G Programming unit with wall−mounting frame

H Control unit K Vitocom 100

V

(6)

G B

1.3 Specification

1.4 Standard delivery

1.3 Specification

Specification Rated voltage: 230V~ Rated frequency : 50Hz Rated current: 15 mA ~ Protection: II Protection level: IP 20 acc. to EN 60529 safeguard through appropriate design and installation

Function: Type 1B according

to EN 607301

Permissible ambient temperature

H in use: 0 to +40 ºC Installation in living accom− modation and boiler rooms (normal ambi− ent conditions) H during storage and transport: 20 to +65 ºC Approval: CTR 21 Location

Note the maximum cable length when selecting a location for installation (see below).

On−site connections

Fault input DE1 ,

230 V ~

Fault input DE2 ,

230 V~

Switch output DA3,

Volt−free 0.5 A 24 V /~

Dimensions

1.4 Standard delivery

Vitocom 100

Incl. 2 m long mains cable, 3 m long connection cable with RJ11 plug for telephone socket,

adaptor RJ11/TAE6N and

3 m long KM BUS cable with plugaVG.

V

(7)

= standard delivery 145/X5/58 145 A B C 2 E 1 D Telephone network 5822 225 G B

1.4 Standard delivery

A Terminal adapter for

communication service*1

B Telephone socket C Telephone plug RJ11 D Adaptor RJ11/TAE6N E Control unit

Item Description Part no.

1 Vitocom 100 with mains cable, telephone cable and adaptor RJ11/TAE6N 7142 057

2 KM BUS cable for connection to the control unit

Accessories

Description Number Part no.

Adaptor (connection extension, in conjunction with Pendola) 1 7404 582

KM BUS distributor (in conjunction with Vitotronic 150, 200 and 300 for several KM BUS users) 1 7415 028

Control module FT (in conjunction with Viessmann Trimatik) 1 7450 535

Connection cable, approx. 0.8 m long (in conjunction with Dekamatik or Viessmann Trimatik) 1 7450 061

*1_{Equipment and quantity in accordance with the required functions.}

V

(8)

G B A B Telephone network

1.5 Application examples

Remote interrogation and remote switching via telephone

Remote interrogation and remote switching

A heating system can be switched on from any telephone via Vitocom 100. Remote interrogation and remote switching is activated by transmitting commands in the form of a sequence of figures.

First dial up Vitocom 100.

Then enter the access codes and the respective codes for remote interrogation and remote switching via the telephone keypad.

Vitocom 100 translates the transmitted code and switches the control unit or responds to remote interrogation with acoustic signals.

Example:

You want to discover the error state of Vitotronic 300, type KW3.

Enter the respective key combination after the connection has been established and the access code has been entered. If a central fault message is present, Vitocom 100 transmits a deep dual tone sequence; if no central fault message is present, a high−pitched quad−tone sequence is transmitted.

Remote switching of a heating system using

H Vitotronic

heating program pre−selection for specific boiler circuits

H Vitodens and Viopend: heating program pre−selection H Dekamatik:

The heating program is changed depending on the heating program selected at the control unit H Viessmann Trimatik:

The remote switching of the operating program via the control module FT is transferred to the switch output of Vitocom 100.

A burner fault message is directly placed on a fault input of Vitocom 100 by the burner connection of Viessmann Trimatik. B Telephone network C A A Vitocom 100 B Telephone with DTMF C Mobile ’phone

Remote monitoring with D1/D2 mobile ’phone

The control unit recognises any faults developed by the heating system or the control unit, e.g. on sensors, on the burner or the circuit board. Information about this fault is then transmitted by the

control unit to Vitocom100 via the connection cable. Vitocom100 dials the programmed D1/D2 telephone number.

Vitocom can store additional system information.

A Vitocom 100 B D1/D2 mobile ’phone

V

(9)

5822 225

G

B

1.5 Application examples

Remote monitoring by fax

Remote monitoring by fax is enabled through the transmission of error messages in plain text.

The control unit recognises any faults developed by the heating system, e.g. on

sensors, at the burner or the printed circuit board. The error message is then transmitted by the control unit via the connection cable, which then dials the programmed fax number.

Vitocom can store additional system information.

Viessmann Vitocom 714205700001107

Recipient:

Messrs.

Klaus Steinmann

Am Haupttor 34

35107 Battenberg/Eder

Tel.: 06999/13735

System message:

FAULT

Vitotronic300

Burner fault

System operator:

Mr

Wilfried Born

Untermarkt 2

35066 Frankenberg/Eder

Tel.: 06999/67890

System:

Vitola 200, 63 kW

Vitocell 300, 500 litres

Vitotronic 300

in conjunction with

Vitocom 100

Message end

A Vitocom 100 B Fax Telephone network A B

_V

itocom 100

(10)

G B G B A B 230/12 V

1.6 Hooking up additional functions

The following connections for hooking up on−site components are provided in the Vitocom 100 connection box:

2 fault inputs DE1 and DE2

1 switched output DA3

Fault inputs DE1 and DE2

Using these inputs, on−site faults can be hooked up with 230 V ~ as mains voltage signals.

Input signals are monitored by Vitocom 100 and notified as faults.

Input signals may be interrogated via the central control, telephone with DTMF or code transmitter via D1/D2/E−Plus mobile ’phone.

Example:

Error message from cooling, lifting and ventilating systems and central fault messages from one control panel.

Switched output DA3

(volt−free relay contacts, rated capacity 0.5 A, 24 V safety voltage acc. to EN 61558).

The external heating program changeover of the control unit can be

switched with this switched output DA3.

On−site components (e.g. lighting) may also be switched via this output. The output may be switched via the central control, telephone with DTMF or via D1/D2/E−Plus mobile ’phone. Connect on−site components to the

switched output DA3 :

A Vitocom 100 terminal box B Contactor relay

V

(11)

5822 225

G

B