How To Use A Sequence Processor Module

General

Specifications

FA-M3

FA-M3 Value, Value II

(including base, power supply,

sequence CPU and DI/O modules)

CONTENTS

F3SC21-1N

FA-M3 Value ... 3

F3SC22-

 

, F3SC23-

 

FA-M3 Value II ... 9

General

Specifications

F3SC21-1N

FA-M3 Value

(including base, power supply,

sequence CPU and DI/O modules)

 General

The F3SC21-1N (FA-M3 Value) is a compact programmable controller

consisting of the following modules:



F3BU04-0N base module (with 4 slots)



F3SP05-0P sequence CPU module (with power supply and

memory)



F3WD64-3N I/O module (with 32 inputs and 32 outputs)

The F3SP05-0P double-slot sequence CPU module is installed in the

leftmost slot of the F3BU04-0N 4-slot base module and the

F3WD64-3N I/O module in slot 2. You can install any FA-M3 I/O

modules in slots 3 and 4.

 Features



Its compact size greatly reduces installation space.



The sequence CPU module has a 100-240 VAC universal power

supply so that the user doesn't have to worry about the power

supply environment when using the F3SC21-1N.



The high-speed instruction processing capability of the

F3SC21-1N makes it ideal for applications that require high speed

response.



The use of a structured ladder programming language facilitates

programming and maintenance of ladder programs.



The sequence CPU module has the personal computer link

function to communicate with a higher-level computer or display.

The user needs no personal computer link module (F3LC11-1N)

for this purpose.



Programs and data can be saved on an optional ROM pack.

DC I/O WD64-3N 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 DISPLAY CN3 1 2 CPU RDY RUN PROGRAMMER SP05-0P RDY CN4 ASSY S926  BK-0 

 Specifications

Item Specification

Number of slots 4

Number of free I/O slots 2 (as the sequence CPU and 64-point I/O modules occupy two slots)

Base module (F3BU04-0N)

Weight 140 g

Supply voltage 100-240 V AC, single phase, 50/60 Hz

Supply voltage fluctuation range 85-264 V AC, 50/60 Hz ±3 Hz

Power consumption 35 VA

Inrush current 20 A max. (120 V AC, Ta=25 ºC)

45 A max. (240 V AC, Ta=25 ºC)

Rated output voltage 5 V DC

Rated output current 2.0 A

Insulation resistance 5 MΩ or greater at 500 V DC (between external AC terminals and FG terminal)

Dielectric strength 1500 V AC for 1 minute (between external AC terminals and FG terminal)

FAIL-signal contact output Provided on the front terminal block on the power supply block; contact rating: 24 V DC, 0.3 A (both normally-open and normally-closed terminals available) Allowable common-mode

voltage of FAIL-signal contact

120 V max. AC or DC

(between FAIL OUTPUT COM terminal and FG terminal)

Leakage current 0.5 mA max.

Allowable momentary power

failure time 20 ms Power suppl y bl o c k

Noise immunity Immune to noise of up to 1500 Vp-p with 1-s pulse width and 1-ns rise time at 25-60

Hz (as measured with a noise simulator).

Control mode Stored program, cyclic execution

I/O control mode Refreshing method/direct I/O instructions

Programming language Structured ladder language, mnemonic language

Basic instructions 25 types Number of

instructions Application

instructions 227 types

Basic instructions 0.18-0.36 μs/instruction Instruction

processing

speed Application _instructions 0.36 μs min./instruction

Program size 5K steps (can be stored in ROM)

Number of I/O points 2048 points max.

Number of program blocks 32 max.

Sampling trace No

Link to personal computer Yes

Monitoring of scan time 10-200 ms variable

Internal relay I: 4096 points max.

Shared relay —

Extended shared relay —

Link relay L: 2048 points

Special relay M: 2048 points

Timer T: 512 points max. (total of internal and external timers and counters)

Counter C: 512 points max. (total of internal and external timers and counters)

Data register D: 5120 points max.

File register —

Link register W: 2048 points

Special register Z: 512 points

Index register V: 32 points

Shared register —

De

vice

s

Extended shared register —

Sequence CPU module*1 (F3SP05-0P) Sequence C P U block

Item Specification

Other features

 Configuration function (device capacity, data lock-up range at power failure, output when CPU stops, etc.)

 Constant scan function (1 ms to 190 ms)

 Debugging functions (forced SET/RESET, online edit, scan operation, etc.)  Error history function (64 records)

 Date/clock function (year/month/day/hour/minute/second/day of week)  Program protection functions

 ROM programming and data storage  Personal computer link function Sequence CP U b lo ck Current consumption 350 mA (5 V DC)*2 External dimensions 58 (W) X 100 (H) X 83.2 (D) mm Weight 320 g

UL UL508 approved, File No.E188707

(Overvoltage Category*4

II, Pollution Degree*5

2)

CE EMC _Directive

EN 61326-1 Class A, Table 2 (For use in industrial locations) EN 61326-2-3*6 EN 55011 Class A, Group 1 EN 61000-6-2, EN 61000-3-2, EN 61000-3-3 compliance Sequence CPU module*1 (F3SP05-0P) C o mmon Compliance with safety and EMC standards*3 C-Tick EMC

Framework EN 55011 Class A, Group 1 compliance

Input type DC voltage

Number of points 32

Number of points/common 8 points/common

Isolation method Photocoupler isolation

Rated input voltage 24 V DC

Operating voltage 20.4-26.4 V DC

Rated input current 4.1 mA/point (24 V DC)

ON 6.0 V DC min., 3.2 mA min.

Operating

voltage/current _{OFF 5.8 V DC max., 0.9 mA max.}

OFF→ON 1.0 ms max. Input ON→OFF 2.5 ms max. Input Bl ock Interrupt No

Output type Transistor contact (sink type)

Number of points 32

Number of points/common 8 points/common

Isolation method Photocoupler isolation

Rated load voltage 24 V DC

Maximum load current 0.1 A/point, 0.4 A/common

OFF→ON 1.0 ms max.

Output

Response _{ON→OFF 1.0 ms max.}

Off-time leakage current 0.1 mA max.

Surge protector Zener diode

Output Bl

ock

External power supply 24 V DC, 60 mA

Input/output status indicator Lit when on (indicates either input or output status by using the selector switch)

Current consumption 200 mA (5 V DC)

External connection Two 40-pin connectors

Input/Output module (F3WD64-3N) C o mmon Weight 160 g

*1: When a sequence CPU module is to be used, use the Ladder Diagram Support Program M3, Rev. 2.02 or later. *2: The total current dissipated by the modules in slots 3 and 4 must be less than 1400 mA.

*3: For details on conforming modules, see “UL-approved, CE marking and C-Tick mark-compliant Modules” (GS 34M06C11-21E) general specification brochure.

*4: The term Overvoltage Category involves prescriptions on resistance to surge voltage reduction due to lightning and has four categories. Overvoltage Category II applies to systems with rated voltage of 220/230/240V and applies to electrical appliances, portable devices, etc. *5: The term Pollution Degree represents the degree of pollution with foreign matter, solid, liquid or gaseous, that may produce a reduction of dielectric

strength or surface resistivity in the operating environment of the equipment. Pollution degree 2 refers to an environment where normally only non-conductive pollution occurs but occasionally temporary conductivity caused by condensation is to be expected.

 Base Module

 Model and Suffix Codes

Model Suffix Code Style Code Option Code Description F3BU04 -0N · · · · · · 4 slots

(excluding slot for power supply)

 External Dimensions

4 slots (F3BU04-0N) O5 mounting hole 9.6 4.5 _7.5 85 100 10.5 88.5 138 147 (When mounted on module surface) (for M4 mounting screw) Unit: mm

 Sequence CPU Module

 Components and Functions

FAIL1 COM FAIL2 N L FAIL OUTPUT SP05-0P RDY CPU

Between FAIL1 and COM Between FAIL2 and COM

Open Short

Short Open During Normal

operation During System and Power Failures Fail-signal contact output

Contact ratings: 24 V DC, 0.3 A

Subject to grounding resistance of 100Ω max independently (JIS class D grounding, previously class 3 grounding)

Connect to FG and grounded 100-240 VAC Lit when power supply is normal

FG LG

FG(Frame Ground) LG(Line filter Ground) Power supply

RDY LED (green)

FB020301.VSD INPUT 100-240VAC RDY RUN ALM ERR CPU module maintenace LEDs PROGRAMMER Programming tool interface connector

 Terminal Dimensions

Unit: mm 8.2 mm 7.1 mm M3.5

 Examples of Applicable Solderless Terminals

Vender Model Applicable

Conductor

Applicable Crimping Torque

Japan Solderless Terminal

Mfg. Co., Ltd. V1.25-M3

Nippon Tanshi Co., Ltd. RAV1.25-3.5

AWG22 to 18 (0.33 to 0.82 mm2₎

(Copper wire) Japan Solderless Terminal

Mfg. Co., Ltd. V1.25-M4

Japan Solderless Terminal

Mfg. Co., Ltd. V2-M4

AWG16 to 14 (1.25 to 2.0 mm2₎

(Copper wire)

0.8 N • m

 CPU Error Processing

Different levels of errors are identified by different LEDs on the front

panel of the CPU module.

LED Meaning

RDY (READY) Green

 Major failure (when off): The core hardware cannot run. Example: CPU error

Memory error

RUN (RUN) Green When lit: The user program is running.

ALM (ALARM) Yellow

 Minor failure (when lit): The user program can still run in spite of a failure.

Example: Power failure Communication error

ERR (ERROR) Red

 Moderate failure (when lit): The user program cannot start or continue execution.

Example: Program error* I/O comparison error* I/O module error* Memory error Sequence processor error Instruction processing error* Scan timeout*

*: Minor or moderate failure can be defined in the configuration settings.

 Model and Suffix Codes

Model Suffix Code Style Code Option Code Description

F3SC21 -1N · · · · · · FA-M3 Value (with base, power supply, sequence CPU, and DI/O modules)

F3SP05 -0P · · · · · · Sequence CPU module (with power supply and memory) Memory: 5K steps

 I/O Module (F3WD64-3N)

 Internal Circuit Diagram

8 10 9 _ + + _ + 8 9 Bus interface Display selector OUT IN 1 COM L L COM ~ 1 ~ Internal bus

 External Connection Diagram

+ 24V COM4 64 63 62 61 60 59 58 57 COM2 48 47 46 45 44 43 42 41 + COM3 56 55 54 53 52 51 50 49 COM1 40 39 38 37 36 35 34 33 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 B A L L L L L L L L 24V L L L L L L L L + + 24V L L L L L L L L L L L L L L L L 24V CN2 (Output block) COM4 32 31 30 29 28 27 26 25 COM2 16 15 14 13 12 11 10 9 – + + – + – – + COM3 24 23 22 21 20 19 18 17 COM1 8 7 6 5 4 3 2 1 – + + – + – – + 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 B A CN1 (Input block)

Note: Viewed from the front of the module.

 External Connections

Connector Type

Wire connection method Soldered

Applicable wire size AWG23 max. (0.26 mm2

max.)

 Applicable External Connectors

Connection Method Applicable Connector

Soldered type Fujitsu FCN-361J040-AU connector

FCN-360C040-B connector cover Solderless type

Fujitsu FCN-363J040 housing FCN-363J-AU contact

FCN-360C040-B connector cover

Solderless type Fujitsu FCN-367J040-AU / F

 Operating Environment

There is no restriction on the type of CPU modules that can be used

with this module.

 Model and Suffix Codes

Model Suffix Code Style Code Option Code Description F3WD64 -3N · · · 24 V DC input/output Note: See the spare parts in the FA-M3 Range-free Multi-controller

(GS 34M6A01-01E) for information on connectors.

 External Dimensions

F3WD64-3N

 General

The F3SC22-

 

or the F3SC23-

 

(FA-M3 Value II) is a compact

programmable controller consisting of the following modules:



F3SC22-1F

F3BU04-0N (4-slot base module)

F3SP08-0P (sequence CPU module)

F3WD32-3F (32-point I/O module)



F3SC22-2F

F3BU04-0N (4-slot base module)

F3SP08-0P (sequence CPU module)

F3WD64-3F (64-point I/O module)



F3SC22-1A

F3BU04-0N (4-slot base module)

F3SP08-0P (sequence CPU module)

F3XD16-3F (16-point input module)

F3YD14-5A (14-point output module)



F3SC23-1F

F3BU04-0N (4-slot base module)

F3SP08-SP (sequence CPU module)

F3WD32-3F (32-point I/O module)



F3SC23-2F

F3BU04-0N (4-slot base module)

F3SP08-SP (sequence CPU module)

F3WD64-3F (64-point I/O module)



F3SC23-1A

F3BU04-0N (4-slot base module)

F3SP08-SP (sequence CPU module)

F3XD16-3F (16-point input module)

F3YD14-5A (14-point output module)



F3SC23-2P

F3BU04-0N (4-slot base module)

F3SP08-SP (sequence CPU module)

F3WD64-3P (64-point I/O module)



F3SC23-6P

F3BU04-0N (4-slot base module)

F3SP08-SP (Sequence CPU module)

F3WD64-4P (64-point I/O module, 12 V)

Install the F3SP08-



P sequence CPU module in the leftmost slot of

the F3BU04-0N base module and the other I/O module(s) in slot 2 (or

slots 2 and 3). The remaining slot(s) is available for a variety of FA-M3

I/O modules.



DC I/O WD32-3F 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 CN3 CPU RDY RUN PROGRAMMER SP08-0P RDY CN4 ASSY S926  BK-0 

 Features



Its compact size greatly reduces installation space.



The sequence CPU module has a 100-240 VAC universal power

supply so that the user doesn't have to worry about the power

supply environment.



The high-speed instruction processing capability makes it ideal for

applications that require high speed response.



The use of a structured ladder programming language facilitates

programming and maintenance of ladder programs.



The sequence CPU module has the personal computer link function

to communicate with a higher-level computer or display. The user

needs no personal computer link module (F3LC11-1N) for this

purpose.



Programs and data can be saved on an optional ROM pack.

General

Specifications

F3SC22-



_{, F3SC23-}



FA-M3 Value II

(including base, power supply,

sequence CPU and DI/O modules)

 Specifications

 Common Specifications for F3SC22 and F3SC23

Item Specification

Number of slots 4

2 (for F3SC22-1F, F3SC22-2F, F3SC23-1F, F3SC23-2F, F3SC23-2P, and F3SC23-6P) Number of free I/O slots

1 (for F3SC22-1A and F3SC23-1A)

Base module (F3BU04-0N)

Weight 140 g

Supply voltage 100-240 V AC, single phase, 50/60 Hz

Supply voltage fluctuation

range 85-264 V AC 50/60 Hz 3 Hz

Power consumption 35 VA

Inrush current 20 A max. (120 V AC, Ta=25 C) _{45 A max. (240 V AC, Ta=25 C)}

Rated output voltage 5 V DC

Rated output current 2.0 A

Insulation resistance 5 M or greater at 500 V DC (between external AC terminals and FG terminal) Dielectric strength 1500 V AC for 1 minute (between external AC terminals and FG terminal) FAIL-signal contact output Provided on the front terminal block on the power supply block;

contact rating: 24 V DC, 0.3 A (both normally-open and normally-closed terminals available) Allowable common-mode

voltage of FAIL-signal contact

120 V max. AC or DC

(between FAIL OUTPUT COM terminal and FG terminal)

Leakage current 0.5 mA max.

Allowable momentary

power failure time 20 ms

Power

Suppl

y B

lo

ck

Noise immunity Immune to noise of up to 1500 Vp-p with 1-s pulse width and 1-ns rise time at 25-60 Hz (as measured with a noise simulator).

Control mode Stored program, cyclic execution

I/O control mode Refreshing method/direct I/O instructions Programming language Structured ladder language, mnemonic language

Basic instructions 25 types Number of instructions Application instructions 227 types Basic instructions 0.18-0.36 s/instruction Instruction Processing speed Application instructions 0.36 s min./instruction

Program size 10K steps (can be stored in ROM)

Number of I/O points 2048 points max. Number of program blocks 32 max.

Sampling trace No

Link to personal computer Yes

Monitoring of scan time 10-200 ms variable

Internal relay I: 4096 points max.

Shared relay —

Extended shared

relay —

Link relay L: 2048 points

Special relay M: 2048 points

Timer T: 512 points max. (total of internal and external timers and counters)

Counter C: 512 points max. (total of internal and external timers and counters)

Data register D: 5120 points max.

File register —

Link register W: 2048 points

Special register Z: 512 points

Index register V: 32 points

Shared register — De vice Extended shared register — Sequence CPU module*1 (F3SP08-0P, F3SP08-SP)*3 Sequence C P U B lock

Item Specification

Other features

 Configuration function (device capacity, data lock-up range at power failure, output when CPU stops, etc.)

 Constant scan function (1 ms to 190 ms)

 Debugging functions (forced SET/RESET, online edit, scan operation, etc.)  Error history function (64 records)

 Date/clock function (year/month/day/hour/minute/second/day of week)  Program protect functions

 ROM programming and data storage  Personal computer link function

Se q u e n c e CPU Bl o c k Current consumption 350 mA (5 V DC)*2 External dimensions 58 (W)  100 (H)  83.2 (D) mm Weight 320 g

UL UL508 approved, File No.E188707

(Overvoltage Category*5

II, Pollution Degree*6

2) EMC

Directive

EN 61326-1 Class A, Table 2 (For use in industrial locations) EN 61326-2-3*7 EN 55011 Class A, Group 1 EN 61000-6-2, EN 61000-3-2, EN 61000-3-3 compliance CE Low Voltage Directive

EN 61010-1 compliance (only for F3SC23-) (Overvoltage Category*5 II, Pollution Degree*6 2)

Sequence CPU module*1 (F3SP08-0P, F3SP08-SP)*3 C o mmon Compli- ance with safety and EMC stan- dards*4 C-Tick EMC

Frame-work

EN 55011 Class A, Group 1 compliance

*1: When a sequence CPU module is to be used, use the FA-M3 programming Tool WideField Rev. 2.06 or later. *2: The total current dissipated by the modules in slots 2 to 4 must be less than 1600 mA.

*3: F3SP08-0P and F3SP08-SP have exactly the same dimensions, internal circuitry and other characteristics, except that F3SP08-0P uses M3.5-screw terminals while F3SP08-SP uses M4-screw terminals.

F3SP08-SP is compliant to IEC61010-1 and EN61010-1, but F3SP08-0P is not.

*4 For details on conforming modules, see “UL-approved, CE marking and C-Tick mark-compliant Modules” (GS 34M06C11-21E) general specification brochure.

*5: The term Overvoltage Category involves prescriptions on resistance to surge voltage reduction due to lightning and has four categories. Overvoltage Category II applies to systems with rated voltage of 220/230/240V and applies to electrical appliances, portable devices, etc. *6: The term Pollution Degree represents the degree of pollution with foreign matter, solid, liquid or gaseous, that may produce a reduction of dielectric

strength or surface resistivity in the operating environment of the equipment. Pollution degree 2 refers to an environment where normally only non-conductive pollution occurs but occasionally temporary conductivity caused by condensation is to be expected.

*7: EN 61326-2-3 is applicable only to F3CU04-0S and F3CU04-1S

 F3SC22-1F, F3SC23-1F

Operating Voltage/

Current Input Response Time Model Input Type Number of _Points Isolation _Method Rated Input _Voltage Rated Input _Current

ON OFF OFF→ON ON→OFF

External Connection

Number of Points/ Common

DC Voltage 16 24V DC 4.1mA/point 16V DC min. _{3.2mA min.} 5.8V DC max. 0.9mA max. Configu -rable as 2.0ms max. or 17ms Configu -rable as 3.5ms max. or 18.5ms 40-pin

connector 8 points/ common

Output Response Time Output

Type Number of Points Rated Load Voltage Load Current Maximum

OFF→ON OFF→ON Surge Protector External Power Supply External Connection Number of Points/ Common HOLD/REST Output When Program Stops F3WD32-3F Transistor contact (sink type) 16 Photocoupler isolation

24V DC _{0.8A/common 1ms max.} 0.1A/point 1ms max. Zener _diode 24V DC _{30mA connector} 40-pin 8 points/ _common Default: RESET Configurable on module basis.* * For CPU error, see “Severity of Failures and LED Display” of FA-M3 Range-free Multi-controller (GS34M6A01-01E).

 F3SC22-2F, F3SC23-2F

Operating Voltage/

Current Input Response Time Model Input Type Number of _Points Isolation _Method Rated Input _Voltage Rated Input _Current

ON OFF OFF→ON ON→OFF External Connection

Number of Points/ Common

DC Voltage 32 24V DC 4.1mA/point 16V DC min. _{3.2mA min.} 5.8V DC max.

0.9mA max. 1.0ms max. 2.5ms max. 40-pin

connector common 8 points/

Output Response Time Output Type Number of _Points Rated Load _{Voltage Load Current} Maximum

OFF→ON OFF→ON Surge Protector External Power Supply External Connection Number of Points/ Common HOLD/REST Output When Program Stops F3WD64-3F Transistor contact (sink type) 32 Photocoupler isolation

24V DC _{0.4A/common 1ms max} 0.1A/point 1ms max Zener _diode 24V DC _{60mA connector} 40-pin _common 8 points/ Default: RESET Configurable on module basis.* * For CPU error, see “Severity of Failures and LED Display” of FA-M3 Range-free Multi-controller (GS34M6A01-01E).

 F3SC22-1A, F3SC23-1A

Operating Voltage/

Current Input Response Time Model Input Type Number of _Points Isolation _Method Rated Input _Voltage Rated Input _Current

ON OFF OFF→ON ON→OFF External

Connection Number of Points/ Common

F3XD16-3F (sink/source DC Voltage

type) 16

Photocoupler

isolation 24V DC 4.1mA/ point 24V DC 16V DC min. 3.2mA min. 5.8V DC max. 0.9mA max. Configu -rable as 2.0ms max. or 17ms Configu -rable as 3.5ms max. or 18.5ms 18-point terminal block M3.5 screw 8 points/ Common

Output Response Time Model Output _Type Number of _Points Isolation _Method Rated Input _Voltage Maximum Load

Current _{OFF→ON ON→OFF} Surge Protector External Power Supply External Connection Number of Points/ Common HOLD/REST Output When Program Stops)

F3YD14-5A Transistor Contact (sink type) 14

Photocoupler

isolation 12-24V DC 2A/common 1ms max. 0.5A/point 1ms max. Zener diode

18-point terminal block M3.5 screw 12-24V DC 20mA 8 points/ common 6 points/ common Default: RESET Configurable on module basis.* * For CPU error, see “Severity of Failures and LED Display” of FA-M3 Range-free Multi-controller (GS34M6A01-01E).

 F3SC23-2P, F3SC23-6P

Operating Voltage/

Current Input Response Time Model Input Type Number of _Points Isolation _Method Rated Input _Voltage Rated Input _Current

ON OFF OFF→ON ON→OFF External Connection Number of Points/ Common DC

Voltage 32 24 V DC 4.1mA/point 16VDC min.3.2mA min.

5.8VDC max.,

0.9mA max. 1.0ms max. 2.5ms max. 40-pin

connector 8 points/ common

Output Response Time Output

Type Number of Points Rated Load Voltage Load Current Maximum

OFF→ON OFF→ON Surge Protector External Power Supply External Connection Number of Points/ Common HOLD/REST Output When Program Stops) F3WD64-3P Transistor contact (sink type) 32 Photocoupler isolation

24 V DC _{0.4A/common 1ms max. 1ms max.} 0.1A/point Active _clamp 24V DC _{55mA Connector} 40-pin 8 points/ _common Default: RESET Configurable on module basis.*

Operating Voltage/

Current Input Response Time Model Input Type Number of _Points Isolation _Method Rated Input _Voltage Rated Input _Current

ON OFF OFF→ON ON→OFF External Connection Number of Points/ Common DC Voltage 32 12 V DC 4.1mA/point 8V DC min. 2.6mA min. 3.4V DC max.,

1.0mA max. 1.0ms max. 2.5ms max. 40-pin connector

8 points/ common

Output Response Time Output

Type Number of Points Rated Load Voltage Load Current Maximum

OFF→ON OFF→ON Surge Protector External Power Supply External Connection Number of Points/ Common HOLD/REST Output When Program Stops) F3WD64-4P Transistor contact (sink type) 32 Photocoupler isolation

12 V DC _{0.4A/common 1ms max. 1ms max.} 0.1A/point Active _clamp 12V DC _{55mA Connector} 40-pin 8 points/ _common Default: RESET Configurable on module basis.* * For CPU error, see “Severity of Failures and LED Display” of FA-M3 Range-free Multi-controller (GS34M6A01-01E).

 Base Module

 Model and Suffix Codes

Model Suffix _Code Style _Code Option _Code Description

F3BU04 -0N · · · · · · 4 slots

(excluding slots for power supply)

 External Dimensions

4 slots (F3BU04-0N) O5 mounting hole 9.6 4.5 _7.5 85 100 10.5 88.5 138 147 (When mounted on module surface) (for M4 mounting screw) Unit: mm

 Sequence CPU Module

 Components and Functions

Between FAIL1 and COM Between FAIL2 and COM

Open Short Short Open During Normal operation

During System and Power Failures

Fail-signal contact output

Contact ratings: 24 V DC, 0.3 A

Subject to JIS class 3 grounding independently.

Subject to JIS class 3 grounding independently for increased noise immunity.

100-240 VAC Lit when the power supply is normal.

FG LG Power supply CPU module maintenance LEDs Programming tool interface connector FAIL1 COM FAIL2 FG LG N L FAIL OUTPUT INPUT 100-240 V AC RDY SP05-0P CPU RDY RUN ALM ERR PROGRAMMER



 Terminal Dimensions

F3SP08-0P 8.2 mm 7.1 mm M3.5 Unit: mm F3SP08-SP 8.2 mm 7.1 mm M4



 Examples of Applicable Solderless Terminals

Applicable Crimping Torque Vender Model Applicable _Conductor

F3SP08-0P F3SP08-SP Japan Solderless Terminal Mfg. Co., Ltd. V1.25-M3 Nippon Tanshi Co., Ltd. RAV1.25-3.5 Not available Japan Solderless Terminal Mfg. Co., Ltd. V1.25-M4 AWG22 to 18 (0.33 to 0.82mm2₎ (Copper wire) Japan Solderless Terminal Mfg. Co., Ltd. V2-M4 AWG16 to 14 (1.25 to 2.0mm2₎ (Copper wire) 0.8 N • m 1.2 N • m



 CPU Error Processing

Different levels of errors are identified by different LEDs on the front

panel of the CPU module.

LED Meaning

RDY (READY) Green

Major failure (when off): The core hardware cannot run. Example: CPU error

Memory error

RUN (RUN)

Green When lit: The user program is running.

ALM (ALARM) Yellow

Minor failure (when lit): The user program can still run in spite of a failure.

Example: Power failure Communication error

ERR (ERROR) Red

Moderate failure (when lit): The user program cannot start or continue execution.

Example: Program error* I/O comparison error* I/O module error* Memory error Sequence processor error Instruction processing error* Scan timeout*

 Model and Suffix Codes

Model Suffix Code Style Code Option Code Description -1F · · · · · ·

FA-M3 Value II (with base, power supply (M3.5 screws), sequence CPU, and DI/O (F3WD32-3F) modules)

-2F · · · · · ·

FA-M3 Value II (with base, power supply (M3.5 screws), sequence CPU, and DI/O (F3WD64-3F) modules)

F3SC22

-1A · · · · · ·

FA-M3 Value II (with base, power supply (M3.5 screws), sequence CPU, and DI/O (F3XD16-3F, F3YD14-5A) modules)

F3SP08 -0P · · · · · ·

Sequence CPU Module (with power supply (M3.5 screws) and memory), memory: 10K steps







 External Dimensions

83.2 58 2 100 Unit: mm Model Suffix Code Style Code Option Code Description -1F · · · · · ·

FA-M3 Value II (with base, power supply (M4 screws), sequence CPU, and DI/O (F3WD32-3F) modules)

-2F · · · · · ·

FA-M3 Value II (with base, power supply (M4 screws), sequence CPU, and DI/O (F3WD64-3F) modules)

-1A · · · · · ·

FA-M3 Value II (with base, power supply (M4 screws), sequence CPU, and DI/O (F3XD16-3F, F3YD14-5A) modules)

-2P · · · · · ·

FA-M3 Value II (with base, power supply (M4 screws), sequence CPU, and DI/O (F3WD64-3P) modules)

F3SC23

-6P · · · · · ·

FA-M3 Value II (with base, power supply (M4 screws), sequence CPU, and DI/O (F3WD64-4P) modules)

F3SP08 SP · · · · · ·

Sequence CPU Module (with power supply (M4 screws) and memory), memory: 10K steps

 I/O Module (F3XD16-3F)

 Internal Circuit Diagram

F3XD16-3F (DC input module) Bus interface Internal bus 1 8 9 ~ COM + +

 External Connection Diagram

1 3 5 7 9 11 13 15 17 1 2 3 4 5 6 7 8 COM1 2 4 6 8 10 12 14 16 18 + + 9 10 11 12 13 14 15 16 COM2 + + F3XD16-3F (DC input module)

Note: Viewed from the front of the module.

 External Connections

Terminal Block

Applicable conductor 0.33 to 0.82 mm2

Method of connection Solderless

Temperature rating 75°C min.

Material Copper

Solderless

terminal For 3.5 mm screws Crimping torque 0.8 N • m Solderless terminal Applicable solderless terminal

e.g.: Japan Solderless Terminal Mfg.Co.,Ltd. V1.25-M3

V1.25-M4 V2-M4 Nippon Tanshi Co., Ltd RAV1.25-3.5



 Operating Environment

There is no restriction on the type of CPU modules that can be used

with this module.

 Model and Suffix Codes

Model Suffix Code Style Code Option Code Description F3XD16 -3F · · · · · · DC input (sink/source type)

24 V DC, 16 points

 External Dimensions

Unit:

F3XD16-3F

 I/O Module (F3YD14-5A)

 Internal Circuit Diagram

1

8

10 9COM F3YD14-5A (Transistor Output Module)

~ L L + Bus interface Internal bus

 External Connection Diagram

F3YD14-5A (Transistor Output Module)

1

3

5

7

9

11

13

15

17

1 2 3 4 5 6 7 8 COM1 12 24V

2

4

6

8

10

12

14

16

18

+ L L L L L L L L 9 10 11 12 13 14 COM2 12 24V + L L L L L L

Note: Viewed from the front of the module.

 External Connections

Terminal Block

Applicable conductor 0.33 to 0.82 mm2

Method of connection Solderless

Temperatule rating 75°C min.

Material Copper

Solderless

terminal For 3.5 mm screws Crimping torque 0.8 N·m Solderless terminal Applicable solderless terminal

ex: Japan Solderless Terminal Mfg.Co.,Ltd. V1.25-M3 V1.25-M4 V2-M4 Nippon Tanshi Co., Ltd RAV1.25-3.5



 Operating Environment

There is no restriction on the type of CPU modules that can be used

with this module.

 Model and Suffix Codes

Model Suffix Code Style Code Option Code Description F3YD14 -5A · · · · · · TR output sink type

12-24 V DC, 0.5A, 14 points

 External Dimensions

Unit:

F3YD14-5A

 I/O Module (F3WD32-3F)

 Internal Circuit Diagram

 External Connection Diagram

+

L

L

L

L

L

L

L

L

24V + 24V

L

L

L

L

L

L

L

L

COM4 32 31 30 29 28 27 26 25 COM2 16 15 14 13 12 11 10 9 COM3 24 23 22 21 20 19 18 17 COM1 8 7 6 5 4 3 2 1 -+ + -+ -+

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

20

19

18

17

16

15

14

13

12

11

10

9

8

7

6

5

4

3

2

1

B

A

Note: Viewed from the front of the module.

 External Connections

Connector Type

Wire connection method Soldered

Applicable wire size AWG23 max. (0.26 mm2 _max.)

 Applicable External Connectors

Connection Method Applicable Connector

Soldered type Fujitsu FCN-361J040-AU connector

FCN-360C040-B connector cover Solderless type

Fujitsu FCN-363J040 housing

FCN-363J-AU contact

FCN-360C040-B connector cover

Solderless type Fujitsu FCN-367J040-AU / F



 Operating Environment

This module can be used with the following CPU modules:

F3SP08-0P and F3SP08-SP

 Model and Suffix Codes

Model Suffix _{Code Code} Style Option _Code Description F3WD32 -3F · · · · · · 24 V DC input/output Note: See the spare parts in the FA-M3 Range-free Multi-controller

(GS 34M6A01-01E) for information on connectors.

 External Dimensions

F3WD32-3F

 I/O Module (F3WD64-3F)

 Internal Circuit Diagram

8 10 9 _ + + _ + 8 9 Bus interface Display selector OUT IN 1 COM L L COM ~ 1 ~ Internal bus

 External Connection Diagram

+ 24V COM4 64 63 62 61 60 59 58 57 COM2 48 47 46 45 44 43 42 41 + COM3 56 55 54 53 52 51 50 49 COM1 40 39 38 37 36 35 34 33 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 B A L L L L L L L L 24V L L L L L L L L + + 24V L L L L L L L L L L L L L L L L 24V CN2 (Output block) COM4 32 31 30 29 28 27 26 25 COM2 16 15 14 13 12 11 10 9 + + + + COM3 24 23 22 21 20 19 18 17 COM1 8 7 6 5 4 3 2 1 + + + + 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 B A CN1 (Input block)

Note: Viewed from the front of the module.

 External Connections

Connector Type

Wire connection method Soldered

Applicable wire size AWG23 max. (0.26 mm2 _max.)

 Applicable External Connectors

Connection Method Applicable Connector

Soldered type Fujitsu FCN-361J040-AU connector

FCN-360C040-B connector cover Solderless type

Fujitsu FCN-363J040 housing

FCN-363J-AU contact

FCN-360C040-B connector cover

Solderless type Fujitsu FCN-367J040-AU / F

 Operating Environment

There is no restriction on the type of CPU modules that can be used

with this module.

 Model and Suffix Codes

Model Suffix _{Code Code} Style Option _Code Description F3WD64 -3F · · · · · · 24 V DC input/output Note: See the spare parts in the FA-M3 Range-free Multi-controller (GS

34M6A01-01E) for information on connectors.

 External Dimensions

F3WD64-3F

 I/O Module (F3WD64-3P)

 Internal Circuit Diagram

In te rn a l b u s ~ ~

 External Connection Diagram

COM4 32 31 30 29 28 27 26 25 COM2 16 15 14 13 12 11 10 9 － ＋ ＋ － COM3 24 23 22 21 20 19 18 17 COM1 8 7 6 5 4 3 2 1 － ＋ ＋ － 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 B A CN1 (Input block) ＋ 24V COM8 64 63 62 61 60 59 58 57 COM6 48 47 46 45 44 43 42 41 ＋ COM7 56 55 54 53 52 51 50 49 COM5 40 39 38 37 36 35 34 33 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 B A L L L L L L L L 24V L L L L L L L L ＋ ＋ 24V L L L L L L L L L L L L L L L L 24V CN2 (Output block)

Note: Viewed from the front of the module.

 External Connections

Connector Type

Wire connection method Soldered

Applicable wire size AWG23 max. (0.26 mm2 _max.)

 Applicable External Connectors

Connection Method Applicable Connector

Soldered type Fujitsu FCN-361J040-AU connector

FCN-360C040-B connector cover Solderless type

Fujitsu FCN-363J040 housing

FCN-363J-AU contact

FCN-360C040-B connector cover

Solderless type Fujitsu FCN-367J040-AU / F

 Operating Environment

There is no restriction on the type of CPU modules that can be used

with this module.

 Model and Suffix Codes

Model Suffix Code Style Code Option Code Description F3WD64 -3P · · · · · · 24 V DC input/output

(with short-circuit protector) Note: See the spare parts in the FA-M3 Range-free Multi-controller

(GS 34M6A01-01E) for information on connectors.

 External Dimensions

F3WD64-3P

 I/O Module (F3WD64-4P)

 Internal Circuit Diagram

8 10 9 COM COM -+ -+ 8 9 OUT IN 1 L L 1 Overheat protector Overcurrent protector Constant voltage circuit Bus Interface Display selector -+

 External Connection Diagram

COM4 32 31 30 29 28 27 26 25 COM2 16 15 14 13 12 11 10 9 COM3 24 23 22 21 20 19 18 17 COM1 8 7 6 5 4 3 2 1 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 B A CN1 (Input block) 12V COM8 64 63 62 61 60 59 58 57 COM6 48 47 46 45 44 43 42 41 COM7 56 55 54 53 52 51 50 49 COM5 40 39 38 37 36 35 34 33 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 B A L L L L L L L L 12V L L L L L L L L 12V L L L L L L L L L L L L L L L L 12V CN2 (Output block)

Note: Viewed from the front of the module.

 External Connections

Connector Type

Wire connection method Soldered

Applicable wire size AWG23 max. (0.26 mm2 _max.)

 Applicable External Connectors

Connection Method Applicable Connector

Soldered type Fujitsu FCN-361J040-AU connector

FCN-360C040-B connector cover Solderless type

Fujitsu FCN-363J040 housing

FCN-363J-AU contact

FCN-360C040-B connector cover

Solderless type Fujitsu FCN-367J040-AU / F

 Operating Environment

There is no restriction on the type of CPU modules that can be used

with this module.

 Model and Suffix Codes

Model Suffix _{Code Code} Style Option _Code Description

F3WD64 -4P · · · · · · 12 V DC input/output (with short-circuit protector) Note: See the spare parts in the FA-M3 Range-free Multi-controller (GS

34M6A01-01E) for information on connectors.

 External Dimensions

F3WD64-4P