E
Price Code
National Standards
Authority of Ireland
Dublin 9
Ireland
Fax: (01) 807 3838
Tel: (01) 807 3800
NSAI 2003
HEATING FUELS - FATTY ACID METHYL
ESTERS (FAME) - REQUIREMENTS
AND TEST METHODS
©
I.S. EN 14213:2003
This Irish Standard was published under the authority of the National
Standards Authority of Ireland
and comes into effect on:
NO COPYING WITHOUT NSAI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW October 3, 2003
75.160.20
ICS
Údarás um Chaighdeáin Náisiúnta na hÉireann
STANDARD
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
EN 14213:2003/AC
December 2003
Décembre 2003
Dezember 2003
ICS 75.160.20English version
Version Française
Deutsche Fassung
Heating fuels - Fatty acid methyl esters (FAME) - Requirements
and test methods
Fuel domestique Esters méthyliques d'acides gras (EMAG) -Exigences et méthodes d'essais
Heizöle - Fettsäure-Methylester (FAME) - Anforderungen und Prüfverfahren
This corrigendum becomes effective on 17 December 2003 for incorporation in the three official
language versions of the EN.
Ce corrigendum prendra effet le 17 décembre 2003 pour incorporation dans les trois versions
linguistiques officielles de l'EN.
Die Berichtigung tritt am 17. Dezember 2003 zur Einarbeitung in die drei offiziellen Sprachfassungen
der EN in Kraft.
EUROPEAN COMMITTEE FOR STANDARDIZATION C O M I T É E U R O P É E N D E N O R M A L I S A T I O N E U R O P Ä I S C H E S K O M I T E E F Ü R N O R M U N G
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2003 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members.
Tous droits d'exploitation sous quelque forme et de quelque manière que ce soit réservés dans le monde entier aux membres nationaux du CEN.
Alle Rechte der Verwertung, gleich in welcher Form und in welchem Verfahren, sind weltweit den nationalen Mitgliedern von CEN vorbehalten.
Ref. No. EN 14213:2003/AC:2003 D/E/F
EN 14213:2003/AC:2003 (E/F/D)
2
English version
2
Normative references
Delete footnote 1 at all references and at the bottom of the page.
Footnote 2 should be renumbered into Footnote 1 at each point in the text and at the bottom
of the page, and read "To be published (revision of EN ISO 3170:1998).
Footnote 3 should be renumbered into Footnote 2 in the text and at the bottom of the page.
EN ISO 3104:1996/AC:1999, title shall read as follows "
Petroleum products - Transparent and
opaque liquids - Determination of kinematic viscosity and calculation of dynamic viscosity
(ISO 3104:1994, including Cor.:1997)"
"ASTM D 1160:1999
, Distillation of Petroleum Products at Reduced Pressure.
" has to be
added.
Table 1
In the whole second column: "% (m/m)" should read in "
% (m/m
)"
The unit for the iodine value should read: "g iodine/100 g"
Table A.1
The third column of the line "sulphated ash content": "% (m/m)" should read in "
% (m/m
)"
Bibliography
Reference [1] should read: "EN 14331
3)"
Liquid petroleum products – Separation and
characterisation of fatty acid methyl esters (FAME) from middle distillate fuels by liquid
chromatography/gas chromatography (LC/GC)
"
Bottom of the page: renumber footnote 4) into footnote 3)
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
EN 14213
July 2003
ICS 75.160.20English version
Heating fuels - Fatty acid methyl esters (FAME) - Requirements
and test methods
Fuel domestique - Esters méthyliques d'acides gras (EMAG) - Exigences et méthodes d'essais
Heizöle - Fettsäure - Methylester (FAME) - Anforderungen und Prüfverfahren
This European Standard was approved by CEN on 13 February 2003.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION C O M I T É E U R O P É E N D E N O R M A L I S A T I O N E U R O P Ä I S C H E S K O M I T E E F Ü R N O R M U N G
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2003 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members.
Ref. No. EN 14213:2003 E
Click on the logos to search the database online.
SAI Global also carries a wide range of publications from a wide variety of Standards Publishers:
The remainder of this document
is available for purchase online at
www.saiglobal.com/shop
This is a free 5 page sample. Access the full version online.