• No results found

Fixed-Abrasive Diamond Wire Saw Machining

N/A
N/A
Protected

Academic year: 2020

Share "Fixed-Abrasive Diamond Wire Saw Machining"

Copied!
114
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 1.2:  (a) Configuration of the wire saw slicing of wafer and (b) close-up view of the grooves in the plastic wire guide and the slicing of workpiece
Figure 1.5:  Three types of wire saw cutting of wood, (a) cutting with a long wire stored in two spools, (b) looped wire saw, and (c) reciprocal/oscillating wire saw cutting
Figure 1.6:  Wire saw cutting of wood workpiece and location of wire deflection capacitance sensors, (a) X-Y contouring, and (b) X-Y contouring plus rotation (A-axis) of the workpiece
Figure 1.8:  Comparison of the kerf in circular and diamond wire saw machining.
+7

References

Related documents

 Teorie  e  metodi  per  la  riqualificazione   architettonica,  energetica  ed  ambientale  del  patrimonio  edilizio  esistente..  Bologna:  Mondadori

Ryszard Górecki Rector of University of Warmia and Mazury, Poland Maciej Bernhardt Professor Warsaw University of Technology, Poland.. Andrzej Kowalewicz Professor University

Immersion students are strongly encouraged to study Modern History in French in order to continue developing language skills.. There is also a mark of 10% for participation

Introduction: As highly active antiretroviral therapy (HAART) transforms human immunodeficiency virus (HIV) into a manageable chronic disease, new challenges are emerging in

[r]

Due to the incidence matrix data structure and this storage strategy, our search operation was not affected as much by disk I/O access time as other non-local DSSE schemes (e.g., [5,

Problematika implementace e- technologií je v současné době jednou z důležitých otázek, které jsou řešeny v rámci různých subjektů podnikového prostředí. S odkazem na

Next, the effect of adding noise to input and output signals of nonlinear blocks and disturbance to the linear block on the mentioned equations is considered, and values of