Online Full Text
Full text
Figure
Related documents
Performance characteristics of the experiments are highly influenced by machining parameters (nose radius, cutting speed, feed rate, depth of cut) so optimization study
A traditional analysis, the Pareto ANOVA, and the Taguchi S/N ratio are employed to determine the effects of the three major input parameters (cutting speed, feed rate, and
At the same time, the main machining parameters (depth of cut, feed rate and cutting speed) do affect a process and every optimization effort. But, even though feed rate and
Abstract: An effort is made to explore the effect of cutting parameters (cutting speed, feed rate, depth of cut and nose radius) on multiple surface roughness characteristics in
[5] attempted to investigate the effect of cutting parameters (cutting speed, feed rate and depth of cut) on cutting forces (feed force, thrust force and
In the present study, an attempt has been made to investigate the effect of cutting parameters (cutting speed, feed rate and depth of cut) on the performance characteristics
cutting parameters (cutting speed, feed rate and depth of cut) in turning operation of stainless steel316 was done and influence of cutting parameters on surface
et al [28] investigated the effect of cutting parameters (cutting speed, feed rate and depth of cut) on cutting forces (feed force, thrust force and cutting force)