• No results found

Numerical study of flow in the water inlet of the penstock of a hydroelectric DAM

N/A
N/A
Protected

Academic year: 2020

Share "Numerical study of flow in the water inlet of the penstock of a hydroelectric DAM"

Copied!
6
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 1. Mesh domaine
Figure 2. Velocity profile for different (a) x=13m, (b) x=15m, (c)profile for different Re(x106) à :  (a) x=13m, (b) x=15m, (c) x=17m
Figure 4. Velocity profile for different x position with(a)Re=25.9x106, (b)Re=28.8x10profile for different x position with: , (b)Re=28.8x106, (c)Re=30.27x106
Figure 7. Velocity profil: (a) at the position of(b) at the position of x=19m with this study represented byRe=25.9x10, Re=27.52x10at the position of x=15m with this study represented by Re=25.9x10Re=25.9x106, Re=27.52x106, Re=27.52x106, Re=30.27x106 ; with this study represented by 6, Re=30.27x106

References

Related documents

Insulin resistance led to onset of Type-II diabetes mellitus and is commonly associated with other cardio vascular risk factors like dysbetalipidema, hypertension and

The ethno botanical efficacy of various parts like leaf, fruit, stem, flower and root of ethanol and ethyl acetate extracts against various clinically

The single variable beam theories taking into account effect of transverse shear deformation for the buckling, bending and free vibration analysis of the thick beam

The study was conducted using the survey model because its aim was to determine the TPACK of pre-service teachers in the departments of primary school elementary school teaching

In this study, it is aimed to develop the Science Education Peer Comparison Scale (SEPCS) in order to measure the comparison of Science Education students'

In this article, we investigate the meromorphic solutions of certain non-linear difference equations using Tumura-Clunie theorem and also provide examples which satisfy our

Figure 6 below shows the graph for different values of network loss v/s the simulation run-time keeping the total number of nodes fixed at 3000..