STATIONARY UNIT
Globalstar Data Kit
Welcome. Your Globalstar Data Kit is your wireless link to the Internet. Please review the following before beginning the installation of your new modem.
A. WHATS IN THE KIT?
• GSP-2900 data cable with RS232 interface residing in the Network Interconnect Device box.
• CD Containing software applications and a detailed QUALCOMM Globalstar Packet Data Users Guide (see section E)
B. WHAT ELSE DO YOU NEED?
• Globalstar GSP-2900 Stationary unit
• Operating systems :Windows 95, 98, NT or 2000; Macintosh; Red Hat Linux; Solaris UNIX
• Grounding equipment is required – not included.
C. GETTING STARTED Windows 95, 98, NT, 2000
• Before you begin, make sure the following are installed on your computer: TCP/IP protocol and Dial-Up Networking for 95/98 or Remote Access Services (RAS) for NT/2000. (For help, see your Windows documentation.)
• See appropriate section below for a detailed explanation of the set-up process for
each of the Windows platforms. UNIX
• Follow the instructions in the Users Guide (or see section D).
Index
Page
Windows 95, 98, 98SE 2
Windows 2000 & ME 9
Place the CD into your CD Rom Drive.
The CD will bring up the following window, if it does not, double click on My Computer on your desktop and then on the CD ROM icon which will produce the following
window;
• Click on the “Install Packet Modem Drivers” This screen will appear:
This screen will appear:
• After reading and agreeing with the License Agreement, Click the “Yes” button This screen will appear:
• Click the “Begin Modem Install” This screen will appear:
• Select the “Other” button and click “Next” This screen will appear:
• Ensure there is a check in the box beside the “Don’t run the Hardware Installation Wizard”
This screen will appear:
This screen will appear:
• Click the “Have Disk…” This screen will appear:
• Click the “Browse” button This screen will appear:
• Click the CD ROM drive in the “Drives” window located at the bottom of the screen • Highlight the “gstardata.inf” file
• Click the “OK” button This screen will appear:
• Highlight the “QUALCOMM Globalstar Phone Modem for Stationary Unit” • Click the “Next” button
This screen will appear:
This screen will appear:
• Click on “Finish” This screen will appear:
• Click on “Close” This screen will appear:
WINDOWS 2000 and ME INSTALLATION
Please note that some of the Windows in 2000 will be different then the ones shown in the screens shown below.
Place the CD into your CD Rom Drive.
The CD will bring up the following window, If it does not, Double Click on My Computer on your desktop and than on the CD ROM icon which will produce the following window:
• Click the “Install Packet Modem Driver” This screen will appear:
• Once you have read and agree with the License agreement, click on the “Yes” button
This screen will appear:
• Once you have read this screen, Click on the “Begin Modem Install” This screen will appear:
This screen will appear:
• Select the “Other” button • Click on “Next” button This screen will appear:
• Ensure there is a check in the box beside “Don’t run the Hardware Installation Wizard”
• Click on “Next” button This screen will appear:
• Ensure there is a check in the box beside “Don’t detect my modem, I will select from a list”
• Click on “Have Disk…” button This screen will appear:
• Click on “Browse..” button This screen will appear:
• Click on the CD ROM drive in the “Drives” window located at the bottom of the screen
This screen will appear:
• Click the “OK” button This screen will appear:
• Highlight “QUALCOMM Globalstar Phone Modem for Stationary Unit” • Click the “Next” button
This screen will appear:
• Click on your “COM1” communications port or whatever port you have connected your phone to
• Click the “Finish” button This screen will appear:
• Click the “Close” button This screen will appear:
This screen will appear:
Place the CD into your CD ROM Drive.
The CD will bring up the following window. If it does not, Double Click on My Computer on your desktop and than on the CD ROM icon which will produce the following window:
• Click the “Install Packet Modem Drivers” This screen will appear:
This screen will appear:
• Once you have read and agree with the License agreement, Click the “Yes” button This screen will appear:
• Once you have read this screen, Click the “Begin Modem Install” This screen will appear:
• Ensure there is a check in the box for “Don’t detect my modem: I will select it from a list”
• Click the “Next” button This screen will appear:
• Click the “Have Disk….” button This screen will appear:
This screen will appear:
• Highlight the “Gstarpacket1_0” • Click the “Open” button
This screen will appear:
• Click the “OK” button This screen will appear:
• Select the “Selected ports” button
• Highlight “COM1” or whatever port you have the Qualcomm Globalstar phone connected to
• Click the “Next” button This screen will appear:
• Click the “Finish” button This screen will appear:
This screen will appear:
• Click the “Yes” button This screen will appear:
• Click the “Add” button This screen will appear:
• Click the “OK’ button This screen will appear:
Click the “Continue” button
