Cisco Network Planning Solution 2.0.2
Documentation Guide and
Supplemental License Agreement
June 2007
This documentation guide contains the End User Supplemental License
Agreement for Cisco Systems Network Management software and explains how to access Cisco Network Planning Solution 2.0.2 and Cisco Network Planning Solution-Service Provider 2.0.2 product documentation sets on Cisco.com.
Release 1.1 or earlier software users:
Warning You must update to Release 2.0 before you update to Release 2.0.2.
Contents
• SUPPLEMENTAL LICENSE AGREEMENT FOR CISCO SYSTEMS NETWORK MANAGEMENT SOFTWARE: CISCO NETWORK
PLANNING SOLUTION, CISCO NETWORK PLANNING SOLUTION – SERVICE PROVIDER, CISCO NETWORK PLANNING SOLUTION – NETWORK VALIDATION MODULE, page 3
• Installation and Use, page 4
• Reproduction and Distribution, page 4
• , page 4
• Cisco Network Planning Solution, page 5
• Network Planning Solution-Service Provider, page 6
SUPPLEMENTAL LICENSE AGREEMENT FOR CISCO SYSTEMS
NETWORK MANAGEMENT SOFTWARE: CISCO NETWORK
PLANNING SOLUTION, CISCO NETWORK PLANNING SOLUTION
– SERVICE PROVIDER, CISCO NETWORK PLANNING SOLUTION –
NETWORK VALIDATION MODULE
IMPORTANT–READ CAREFULLY: This Supplemental License Agreement
(“SLA”) contains additional limitations on the license to the Software provided to Customer under the End User License Agreement between Customer and Cisco. Capitalized terms used in this SLA and not otherwise defined herein shall have the meanings assigned to them in the End User License Agreement. To the extent that there is a conflict among any of these terms and conditions applicable to the Software, the terms and conditions in this SLA shall take precedence.
By installing, downloading, accessing or otherwise using the Software, Customer agrees to be bound by the terms of this SLA. If Customer does not agree to the terms of this SLA, Customer may not install, download, or otherwise use the Software.
ADDITIONAL LICENSE RESTRICTIONS
Restricted Version. Customer may install and use the Software only within a
Non-Restricted Version. Customer may install and use the Software on
Customer’s classful IP network, for one concurrent user at a time. Using the non-restricted version, users may utilize the Software from the same classful IP network as the license server and up to one hundred (100) additional classful IP networks, within the Customer’s network management environment. Usage restrictions are enforced by license registration. The deployment of the
non-restricted device version is defined by the Installation and Use section in this document.
Installation and Use
Cisco Network Planning Solution, Cisco Network Planning Solution – Service Provider, Cisco Network Planning Solution – Network Validation Module: May be installed in either Stand-Alone or Floating mode. The Stand-Alone Mode allows Software to be used on a single workstation. Users of that workstation can operate Software and do not need a network connection. Floating Mode allows Software to be installed on a license server and allows each concurrent user to “check out” a license on an as-needed basis and return it automatically when completed. Each concurrent user must be on the same classful IP network as the license server.This license strictly prohibits Customer and any user from utilizing this Software for more than a single Customer network management environment.
Reproduction and Distribution
Customer may not reproduce nor distribute software.
DESCRIPTION OF OTHER RIGHTS AND LIMITATIONS
Product Documentation Set
The installation guide for your product is located on Cisco.com at this URL: http://www.cisco.com/en/US/products/ps6363/prod_installation_guides_list.html In addition, your product shipment includes an executable CD-ROM of the integrated Online Help system, which contains the documentation listed in the following sections:
Cisco Network Planning Solution
• Design and Analysis User Guide
• Design and Analysis Reference Guide
• Workflows Manual
• XDI User Guide
• Network Validation Module User Guide
• Flow Analysis User Guide
• Planning and Design User Guide
• Standard Model User Guides
• Specialized Model User Guides
• Administrator Guide
• Documentation Guide
• General Tutorials
Network Planning Solution-Service Provider
• Design and Analysis User Guide
• Design and Analysis Reference Guide
• Workflows Manual
• XDI User Guide
• Network Validation Module User Guide
• Flow Analysis User Guide
• Planning and Design User Guide
• Standard Model User Guides
• Specialized Model User Guides
• Administrator Guide
• Documentation Guide
• General Tutorials
• Design and Analysis Release Notes
Obtaining Documentation, Obtaining Support, and
Security Guidelines
For information on obtaining documentation, obtaining support, providing documentation feedback, security guidelines, and also recommended aliases and general Cisco documents, see the monthly What’s New in Cisco Product
Documentation, which also lists all new and revised Cisco technical
documentation, at:
CCVP, the Cisco logo, and the Cisco Square Bridge logo are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn is a service mark of Cisco Systems, Inc.; and Access Registrar, Aironet, BPX, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Enterprise/Solver, EtherChannel, EtherFast, EtherSwitch, Fast Step, Follow Me Browsing, FormShare, GigaDrive, HomeLink, Internet Quotient, IOS, iPhone, IP/TV, iQ Expertise, the iQ logo, iQ Net Readiness Scorecard, iQuick Study, LightStream, Linksys, MeetingPlace, MGX, Networking Academy, Network Registrar, Packet, PIX, ProConnect, ScriptShare, SMARTnet, StackWise, The Fastest Way to Increase Your Internet Quotient, and TransPath are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.