Monitor Interplay Engine Version 04/29/08 HOWTO

Loading....

Loading....

Loading....

Loading....

Loading....

Full text

(1)

Monitor Interplay Engine

Version 04/29/08 HOWTO

Important Information

Avid recommends that you read all the information in this document

thoroughly before executing each step or instruction.

This document is available via Avid Customer Support or

Knowledgebase

(2)

Monitor Interplay Engine [04/29/08] HOWTO

2

Symbols and Conventions

This document use the following special symbols and conventions:

A

note

provides

important

related

information,

reminders,

recommendations, and strong suggestions.

A caution means that a specific action you take could cause harm

to your computer or cause you to lose data.

Affected application/product

Interplay engine/archive engine

Prerequisites

None

Introduction

This document describes how to monitor the Interplay Engine for

performance reason. There are several way to enable performance

monitoring for processes on Windows. Standard is to use the performance

monitor tool delivered with the operating system.

(3)

Monitor Interplay Engine [04/29/08] HOWTO

3

Enable monitoring

1. Start performance monitor tool on the Interplay Engine machine by

selecting “

Run” -> “Execute” -> perfmon -> “Ok”

2. Mark the lines which can be found in appendix A of this document

between the “

start here

” and “

end here

” lines and store it as

.HTML

file

(e.g. using notepad and cut & paste).

3. “

Open the performance logs and alerts

” tree and right click “

Counter

logs

”. Select “

new log settings from

” and choose your html-config

file.

(4)

Monitor Interplay Engine [04/29/08] HOWTO

4

4. Confirm the below naming

.

5. The “

Engine

” property page will be shown. End by clicking to “

ok

”.

6. Start monitoring of the Interplay Engine by right clicking on the “

Engine

entry and selecting “

start

”. The status will change to green and all

information are logged to the file named within the below dialog (log file

name entry)

(5)

Monitor Interplay Engine [04/29/08] HOWTO

5

Collect monitoring output

1. Copy the file from it’s location

(e.g.

%TEMP%\Interplay Engine_*.csv

)

(6)

Monitor Interplay Engine [04/29/08] HOWTO

6

Appendix A

---start here---

<HTML> <HEAD>

<META HTTP-EQUIV="Content-Type" CONTENT="text/html;" /> <META NAME="GENERATOR" Content="Microsoft System Monitor" /> </HEAD>

<BODY>

<OBJECT ID="DISystemMonitor1" WIDTH="100%" HEIGHT="100%" CLASSID="CLSID:C4D2D8E0-D1DD-11CE-940F-008029004347"> <PARAM NAME="_Version" VALUE="196611"/>

<PARAM NAME="LogName" VALUE="Engine"/>

<PARAM NAME="Comment" VALUE="Interplay Engine Performance"/> <PARAM NAME="LogType" VALUE="0"/>

<PARAM NAME="CurrentState" VALUE="1"/> <PARAM NAME="RealTimeDataSource" VALUE="1"/> <PARAM NAME="LogFileMaxSize" VALUE="5120"/> <PARAM NAME="DataStoreAttributes" VALUE="33"/>

<PARAM NAME="LogFileBaseName" VALUE="Interplay Engine"/> <PARAM NAME="LogFileSerialNumber" VALUE="1"/>

<PARAM NAME="LogFileFolder" VALUE="%TEMP%"/>

<PARAM NAME="Sql Log Base Name" VALUE="SQL:!Engine"/> <PARAM NAME="LogFileAutoFormat" VALUE="5"/>

<PARAM NAME="LogFileType" VALUE="0"/> <PARAM NAME="StartMode" VALUE="0"/> <PARAM NAME="StopMode" VALUE="1"/> <PARAM NAME="RestartMode" VALUE="3"/>

<PARAM NAME="LogFileName" VALUE="%TEMP%\IE_Performance.csv"/> <PARAM NAME="EOFCommandFile" VALUE=""/>

<PARAM NAME="Counter00001.Path" VALUE="\Process(Apache#1)\% Privileged Time"/> <PARAM NAME="Counter00002.Path" VALUE="\Process(Apache#1)\% Processor Time"/> <PARAM NAME="Counter00003.Path" VALUE="\Process(Apache#1)\% User Time"/>

<PARAM NAME="Counter00004.Path" VALUE="\Process(Apache#1)\Creating Process ID"/> <PARAM NAME="Counter00005.Path" VALUE="\Process(Apache#1)\Elapsed Time"/> <PARAM NAME="Counter00006.Path" VALUE="\Process(Apache#1)\Handle Count"/> <PARAM NAME="Counter00007.Path" VALUE="\Process(Apache#1)\ID Process"/>

<PARAM NAME="Counter00008.Path" VALUE="\Process(Apache#1)\IO Data Bytes/sec"/> <PARAM NAME="Counter00009.Path" VALUE="\Process(Apache#1)\IO Data Operations/sec"/> <PARAM NAME="Counter00010.Path" VALUE="\Process(Apache#1)\IO Other Bytes/sec"/> <PARAM NAME="Counter00011.Path" VALUE="\Process(Apache#1)\IO Other Operations/sec"/> <PARAM NAME="Counter00012.Path" VALUE="\Process(Apache#1)\IO Read Bytes/sec"/> <PARAM NAME="Counter00013.Path" VALUE="\Process(Apache#1)\IO Read Operations/sec"/> <PARAM NAME="Counter00014.Path" VALUE="\Process(Apache#1)\IO Write Bytes/sec"/> <PARAM NAME="Counter00015.Path" VALUE="\Process(Apache#1)\IO Write Operations/sec"/> <PARAM NAME="Counter00016.Path" VALUE="\Process(Apache#1)\Page Faults/sec"/>

<PARAM NAME="Counter00017.Path" VALUE="\Process(Apache#1)\Page File Bytes"/> <PARAM NAME="Counter00018.Path" VALUE="\Process(Apache#1)\Page File Bytes Peak"/> <PARAM NAME="Counter00019.Path" VALUE="\Process(Apache#1)\Pool Nonpaged Bytes"/> <PARAM NAME="Counter00020.Path" VALUE="\Process(Apache#1)\Pool Paged Bytes"/> <PARAM NAME="Counter00021.Path" VALUE="\Process(Apache#1)\Priority Base"/> <PARAM NAME="Counter00022.Path" VALUE="\Process(Apache#1)\Private Bytes"/> <PARAM NAME="Counter00023.Path" VALUE="\Process(Apache#1)\Thread Count"/> <PARAM NAME="Counter00024.Path" VALUE="\Process(Apache#1)\Virtual Bytes"/> <PARAM NAME="Counter00025.Path" VALUE="\Process(Apache#1)\Virtual Bytes Peak"/> <PARAM NAME="Counter00026.Path" VALUE="\Process(Apache#1)\Working Set"/> <PARAM NAME="Counter00027.Path" VALUE="\Process(Apache#1)\Working Set Peak"/> <PARAM NAME="Counter00028.Path" VALUE="\Process(Apache)\% Privileged Time"/> <PARAM NAME="Counter00029.Path" VALUE="\Process(Apache)\% Processor Time"/> <PARAM NAME="Counter00030.Path" VALUE="\Process(Apache)\% User Time"/>

<PARAM NAME="Counter00031.Path" VALUE="\Process(Apache)\Creating Process ID"/> <PARAM NAME="Counter00032.Path" VALUE="\Process(Apache)\Elapsed Time"/>

<PARAM NAME="Counter00033.Path" VALUE="\Process(Apache)\Handle Count"/> <PARAM NAME="Counter00034.Path" VALUE="\Process(Apache)\ID Process"/> <PARAM NAME="Counter00035.Path" VALUE="\Process(Apache)\IO Data Bytes/sec"/> <PARAM NAME="Counter00036.Path" VALUE="\Process(Apache)\IO Data Operations/sec"/> <PARAM NAME="Counter00037.Path" VALUE="\Process(Apache)\IO Other Bytes/sec"/> <PARAM NAME="Counter00038.Path" VALUE="\Process(Apache)\IO Other Operations/sec"/> <PARAM NAME="Counter00039.Path" VALUE="\Process(Apache)\IO Read Bytes/sec"/> <PARAM NAME="Counter00040.Path" VALUE="\Process(Apache)\IO Read Operations/sec"/> <PARAM NAME="Counter00041.Path" VALUE="\Process(Apache)\IO Write Bytes/sec"/> <PARAM NAME="Counter00042.Path" VALUE="\Process(Apache)\IO Write Operations/sec"/> <PARAM NAME="Counter00043.Path" VALUE="\Process(Apache)\Page Faults/sec"/>

(7)

Monitor Interplay Engine [04/29/08] HOWTO

7

<PARAM NAME="Counter00044.Path" VALUE="\Process(Apache)\Page File Bytes"/> <PARAM NAME="Counter00045.Path" VALUE="\Process(Apache)\Page File Bytes Peak"/> <PARAM NAME="Counter00046.Path" VALUE="\Process(Apache)\Pool Nonpaged Bytes"/> <PARAM NAME="Counter00047.Path" VALUE="\Process(Apache)\Pool Paged Bytes"/> <PARAM NAME="Counter00048.Path" VALUE="\Process(Apache)\Priority Base"/> <PARAM NAME="Counter00049.Path" VALUE="\Process(Apache)\Private Bytes"/> <PARAM NAME="Counter00050.Path" VALUE="\Process(Apache)\Thread Count"/> <PARAM NAME="Counter00051.Path" VALUE="\Process(Apache)\Virtual Bytes"/> <PARAM NAME="Counter00052.Path" VALUE="\Process(Apache)\Virtual Bytes Peak"/> <PARAM NAME="Counter00053.Path" VALUE="\Process(Apache)\Working Set"/>

<PARAM NAME="Counter00054.Path" VALUE="\Process(Apache)\Working Set Peak"/> <PARAM NAME="Counter00055.Path" VALUE="\Process(NxNServer)\% Privileged Time"/> <PARAM NAME="Counter00056.Path" VALUE="\Process(NxNServer)\% Processor Time"/> <PARAM NAME="Counter00057.Path" VALUE="\Process(NxNServer)\% User Time"/>

<PARAM NAME="Counter00058.Path" VALUE="\Process(NxNServer)\Creating Process ID"/> <PARAM NAME="Counter00059.Path" VALUE="\Process(NxNServer)\Elapsed Time"/> <PARAM NAME="Counter00060.Path" VALUE="\Process(NxNServer)\Handle Count"/> <PARAM NAME="Counter00061.Path" VALUE="\Process(NxNServer)\ID Process"/> <PARAM NAME="Counter00062.Path" VALUE="\Process(NxNServer)\IO Data Bytes/sec"/> <PARAM NAME="Counter00063.Path" VALUE="\Process(NxNServer)\IO Data Operations/sec"/> <PARAM NAME="Counter00064.Path" VALUE="\Process(NxNServer)\IO Other Bytes/sec"/> <PARAM NAME="Counter00065.Path" VALUE="\Process(NxNServer)\IO Other Operations/sec"/> <PARAM NAME="Counter00066.Path" VALUE="\Process(NxNServer)\IO Read Bytes/sec"/> <PARAM NAME="Counter00067.Path" VALUE="\Process(NxNServer)\IO Read Operations/sec"/> <PARAM NAME="Counter00068.Path" VALUE="\Process(NxNServer)\IO Write Bytes/sec"/> <PARAM NAME="Counter00069.Path" VALUE="\Process(NxNServer)\IO Write Operations/sec"/> <PARAM NAME="Counter00070.Path" VALUE="\Process(NxNServer)\Page Faults/sec"/>

<PARAM NAME="Counter00071.Path" VALUE="\Process(NxNServer)\Page File Bytes"/> <PARAM NAME="Counter00072.Path" VALUE="\Process(NxNServer)\Page File Bytes Peak"/> <PARAM NAME="Counter00073.Path" VALUE="\Process(NxNServer)\Pool Nonpaged Bytes"/> <PARAM NAME="Counter00074.Path" VALUE="\Process(NxNServer)\Pool Paged Bytes"/> <PARAM NAME="Counter00075.Path" VALUE="\Process(NxNServer)\Priority Base"/> <PARAM NAME="Counter00076.Path" VALUE="\Process(NxNServer)\Private Bytes"/> <PARAM NAME="Counter00077.Path" VALUE="\Process(NxNServer)\Thread Count"/> <PARAM NAME="Counter00078.Path" VALUE="\Process(NxNServer)\Virtual Bytes"/> <PARAM NAME="Counter00079.Path" VALUE="\Process(NxNServer)\Virtual Bytes Peak"/> <PARAM NAME="Counter00080.Path" VALUE="\Process(NxNServer)\Working Set"/> <PARAM NAME="Counter00081.Path" VALUE="\Process(NxNServer)\Working Set Peak"/> <PARAM NAME="Counter00082.Path" VALUE="\Process(NXNTCP~1)\% Privileged Time"/> <PARAM NAME="Counter00083.Path" VALUE="\Process(NXNTCP~1)\% Processor Time"/> <PARAM NAME="Counter00084.Path" VALUE="\Process(NXNTCP~1)\% User Time"/>

<PARAM NAME="Counter00085.Path" VALUE="\Process(NXNTCP~1)\Creating Process ID"/> <PARAM NAME="Counter00086.Path" VALUE="\Process(NXNTCP~1)\Elapsed Time"/> <PARAM NAME="Counter00087.Path" VALUE="\Process(NXNTCP~1)\Handle Count"/> <PARAM NAME="Counter00088.Path" VALUE="\Process(NXNTCP~1)\ID Process"/>

<PARAM NAME="Counter00089.Path" VALUE="\Process(NXNTCP~1)\IO Data Bytes/sec"/> <PARAM NAME="Counter00090.Path" VALUE="\Process(NXNTCP~1)\IO Data Operations/sec"/> <PARAM NAME="Counter00091.Path" VALUE="\Process(NXNTCP~1)\IO Other Bytes/sec"/> <PARAM NAME="Counter00092.Path" VALUE="\Process(NXNTCP~1)\IO Other Operations/sec"/> <PARAM NAME="Counter00093.Path" VALUE="\Process(NXNTCP~1)\IO Read Bytes/sec"/> <PARAM NAME="Counter00094.Path" VALUE="\Process(NXNTCP~1)\IO Read Operations/sec"/> <PARAM NAME="Counter00095.Path" VALUE="\Process(NXNTCP~1)\IO Write Bytes/sec"/> <PARAM NAME="Counter00096.Path" VALUE="\Process(NXNTCP~1)\IO Write Operations/sec"/> <PARAM NAME="Counter00097.Path" VALUE="\Process(NXNTCP~1)\Page Faults/sec"/>

<PARAM NAME="Counter00098.Path" VALUE="\Process(NXNTCP~1)\Page File Bytes"/> <PARAM NAME="Counter00099.Path" VALUE="\Process(NXNTCP~1)\Page File Bytes Peak"/> <PARAM NAME="Counter00100.Path" VALUE="\Process(NXNTCP~1)\Pool Nonpaged Bytes"/> <PARAM NAME="Counter00101.Path" VALUE="\Process(NXNTCP~1)\Pool Paged Bytes"/> <PARAM NAME="Counter00102.Path" VALUE="\Process(NXNTCP~1)\Priority Base"/> <PARAM NAME="Counter00103.Path" VALUE="\Process(NXNTCP~1)\Private Bytes"/> <PARAM NAME="Counter00104.Path" VALUE="\Process(NXNTCP~1)\Thread Count"/> <PARAM NAME="Counter00105.Path" VALUE="\Process(NXNTCP~1)\Virtual Bytes"/> <PARAM NAME="Counter00106.Path" VALUE="\Process(NXNTCP~1)\Virtual Bytes Peak"/> <PARAM NAME="Counter00107.Path" VALUE="\Process(NXNTCP~1)\Working Set"/> <PARAM NAME="Counter00108.Path" VALUE="\Process(NXNTCP~1)\Working Set Peak"/> <PARAM NAME="Counter00109.Path" VALUE="\Processor(*)\% Idle Time"/>

<PARAM NAME="CounterCount" VALUE="109"/> <PARAM NAME="UpdateInterval" VALUE="60"/>

<PARAM NAME="SampleIntervalUnitType" VALUE="2"/> <PARAM NAME="SampleIntervalValue" VALUE="1"/> </OBJECT>

</BODY> </HTML>

Figure

Updating...

References

Updating...

Related subjects :