• No results found

00.Safety+Contents_EN 6/26/03 2:40 PM Page 1

N/A
N/A
Protected

Academic year: 2020

Share "00.Safety+Contents_EN 6/26/03 2:40 PM Page 1"

Copied!
50
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 2Figure 1

References

Related documents

Press one of the sound field programmebuttons on the remote control to select a multichannel playback mode and try again to play back the signal source or the programme. No sound

To correct this, do the following: Press the Menu button on your remote control; Select the Settings icon; Using the Directional Arrows, highlight Hardware Settings and press OK;

S Using the button on the front panel display, scroll to the Control menu option and press the button.. S Press the button to select the Go to Bypass

To enter this menu option, select the icon while on the Home Page or press the [MENU] button on the remote control when in television mode, then go to Settings >

Press either SOURCE button on the main unit or AUX button on the remote control to select AUX mode..

To correct this, do the following: Press the Menu button on your remote control; Select the Settings icon; Using the Directional Arrows, highlight Hardware Settings and press OK;

Press the menu button to select the desired mode, auto, sound, manual RGB 2.. Press enter

 Press the ◄ ► buttons, to select the level of noise reduction, and then press the BACK button on the device or the MENU button on the remote control to save the settings