• No results found

A Kinematic Model to Compensate the Structural Deformations in Machine Tools Using Fibre Bragg Grating (FBG) Sensors

N/A
N/A
Protected

Academic year: 2020

Share "A Kinematic Model to Compensate the Structural Deformations in Machine Tools Using Fibre Bragg Grating (FBG) Sensors"

Copied!
14
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 1. The adaptive structure concept and the sensor locations (internal view).
Figure 2. Description of general limited DOF parallel manipulator system.
Figure 3. HTM system composition of subsequent reference plane.
Figure 4. A set of overviews of the FE analysis results (strain-tensors) performed on the CFRP beam with the embedded FBG sensors applying a static load on Y axis
+5

References

Related documents

As regards the frequency of anemia, there was a statistically significant high frequency of anemia in patients of group (П) than that of group (І) with a

This descriptive case series study was conducted from July 2015 to December 2015 on the patients that were provisionally diagnosed as acute peritonitis after relevant

Researches that have been implemented using the scale SELSA (Social and Emotional Loneliness Scale for Adults) on Internet users has shown a high level of Internet use with a

The number of layers (vertical height) of a thin-wall part that can be built without damage was contingent on its aspect ratio and build orientation. It is

April 1917 – Germans help smuggle Lenin into Russia (from exile in Switzerland) – he begins agitating for communism (Germans wanted Russia out of war)v. Lenin’s “April

In both our treatment groups, students were able to take advantage of many of the learning principles which make mastery work; all treatment students received frequent

April 2010.. Please describe the national policy in force regarding energy and renewable energy technologies. Please describe the national thermal building regulations