PRODUCT GUIDE
2
DC Sports was founded by Darrell and Derrick Contreras as a high quality designer and manufacturer of performance products to address
the developing Sport Compact Market.
In 1987, American Honda commissioned DC Sports to develop a header for their SCCA prepped CRX’s and the result cumulated was our
first 4 into 1 header design. It was so well received that Honda requested headers for other applications. That system is the one that
started it all (HHC5002)
The Sport Compact Market was primarily based on popular Japanese small cars that were great cars to begin with, but also excellent
platforms for various tuning modifications.
Throughout the 1990s, DC Sports was synonymous with Honda and Acura performance and in
the early 2000’s started expanding into other sport compact platforms. DC Sports developed
unique designs that performed better and therefore became the brand of choice for serious
enthusiasts.
DC Sports offers products for most popular sport compact vehicles. Our headers and intakes
are available as CARB approved-50 states legal or race only- off road use versions. Headers
are manufactured with polished T304SS stainless and/or T409SS ceramic coated for
protection and finish. Intake kits come with a high flow open element filter complete with
all necessary hardware for a hassle free installation. Braces are manufactured with mild
steel for strength and powder-coated for a quality durable finish and solid one piece designs are used
whenever possible to provide the maximum chassis rigidity. All parts are engineered, dyno tested for performance (where applicable), and
come with an industry standard one year warranty. DC Sports has always been first and foremost about performance and value but there
is also no other product that has the DC Sports look, feel, and quality.
In 2004, DC Sports was purchased by Advanced Engine Management (AEM), a leading
manufacturer of performance parts specializing in air induction and electronics for
the Sport Compact and Truck/SUV Markets. AEM continued the strong DC
Sports tradition of producing the very best exhaust products and
developed an even stronger connection to motorsports for
the brand.
Pilot Automotive entered the picture in 2007
when it purchased the aftermarket assets
and intellectual property of DC Sports from
AEM. Pilot is one of the largest accessory
and performance product suppliers to the
automotive and truck markets. Pilot owns
a number of well known brands such as
Pilot, Red Line, APC, Bully, and VPS (Vehicle
Performance Systems).
DC Sports has a comprehensive global
distribution network and is headquartered in City of
Industry, California. For more information or any questions on
DC Sports, visit us at www.dcsports.com or call (626) 968-5147. The DC
Sports brand will always stand for the very best in performance!
TABLE OF
CONTENTS
HEADERS
04
17
18
24
30
AIR INTAKES
AIR FILTERS
EXHAUST
STRUT BARS
4-1 5
RACE HEADER
6
4-2-1 ONE PIECE
7
4-2-1 TWO-PIECE
8
3-1
9
K-SWAP 10
TURBO MANIFOLDS
11
COMPETITION PIPE
11
SINGLE CANISTER EXHAUST, DUAL TIP 25
SINGLE CANISTER
25
DUAL CANISTER
26
UNIVERSAL MUFFLERS
27
SILENCERS 27
UPPER STRUT BARS
30
UNDER BRACE BARS
31
COLD AIR
18
SHORT RAM
19
4
HEADER SYSTEMS
DC Sports header systems are dyno tested to outperform all comparable header
systems on the market. Extensive research and development goes into each
system to ensure the best performance for your vehicle. We precision-bend our
headers on our CNC mandrel benders, using data acquired from our non-contact
digitizing scanner. Our flanges are CNC machined, we machine-grind the flange mating
surface to ensure a leak-free seal and use a robotic welder to attach the flange to the header
pipes. Our state-of-the-art manufacturing process ensures superior quality and a perfect fit
with every header system we make.
DC Sports headers are available in 100% T-304-stainless steel, and/or in T-409 stainless
steel with a proprietary temperature and corrosion-resistant ceramic coating. We thermally
degrease and sandblast our headers to prepare the surface for coating adhesion, and
hand-paint them to ensure an even application. After verifying the proper thickness of the coating,
the header is cured for proper bonding of the ceramic coating and then fine-blasted for a
high-luster finish.
DC Sports has three 50-state legal header designs: A race-inspired 4-into-1 design that
optimizes mid to top-end power, a lightweight, one-piece 4-2-1 design that provides
maximum ground clearance and emphasizes low to mid-range power for street/drag
applications, and a two-piece 4-2-1 design for easy installation and unmatched low to
mid-range power.
Our “Race-Only” headers come in 4-into-1 and 4-2-1 designs, and our turbo manifolds and
competition pipes for O.E.-equipped turbocharged vehicles are 100% stainless steel. Please
refer to the application chart for more information on design and material availability.
MACHINED FLANGES
PRECISION WELDS
BIFURCATION
4-1 HEADER SYSTEMS
In 1987, American Honda commissioned DC Sports to develop a header for SCCA-prepped CRXs.
What culminated was our first 4-into-1 header design, and it was so well received that Honda
requsted headers for other applications. That system (HHC5002) is the one that started it all.
• Dyno tuned and tested against the competition for
maximum performance
• CAD-rendered, race-inspired 4-into-1 design emphasizes
top-end power for road racing applications
• 50 state legal or pending legality
• Available in 100% T304 polished stainless steel (including
flanges), or T409 stainless steel with ceramic coating
• CNC mandrel bends with welded fittings
deliver
perfect fit
• Equal length primary piping ensures optimum tuning
for more power across rpm range
• Unique merge collector design ensures
smooth exhaust gas flow
• Comprehensive installation instructions, all
necessary hardware and decals included
KEY FEATURES
The merge collector in our 4-into-1 systems feature a
unique trapezoidal design that is proven to effeciently
expedite exhaust gas flow by virtually eliminating
turbulence. This design also improves ground clearance
by allowing us to offset the top and bottom header piping.
6
For up to date CARB legality information and application fitment please contact us at [email protected] / (626) 968-5147 or your local authorized dealer
RACE HEADER SYSTEMS
ONE-PIECE DESIGN IMPROVES
GROUND CLEARANCE!
Whether you drag race, road race, set land speed records or drift, DC Sports Race headers
delivers the power you need to finish first. Our Race headers deliver unrestricted power
through extensive tuning and by eliminating the catalytic converter(s) for all-out performance.
KEY FEATURES
• Race headers eliminate catalytic converter for minumum restriction
• Dyno tuned and tested against the competition for maximum performance
• CAD-rendered design eases installation
• Available in 100% T304 polished stainless steel (including flanges),
or T409 stainless steel with ceramic coating
KEY FEATURES
4-2-1 HEADER SYSTEMS
DC Sports 4-2-1 one-piece header systems deliver incredible low- to mid-range power gains,
while improving ground clearance and reducing weight by eliminating the middle flanges. Our
4-2-1 one-piece headers are much lighter than stock systems and are on average two-pounds
lighter than our two-piece systems.
ONE-PIECE DESIGN IMPROVES
GROUND CLEARANCE!
• Dyno tuned and tested against the
competition for maximum performance
• One-piece design reduces weight by eliminating middle flanges
• Unique merge collector design improves ground clearance
• 50-state legal or pending legality
• Equal length primary piping ensures optimum tuning for more power across rpm range
• Comprehensive installation instructions, all necessary hardware and decals included
• CAD-rendered, drag-inspired 4-2-1 design emphasizes low and mid-range power for
street/strip applications
• Available in 100% T304 polished stainless steel (including flanges), or T409 stainless
steel with ceramic coating
8
For up to date CARB legality information and application fitment please contact us at [email protected] / (626) 968-5147 or your local authorized dealer
4-2-1 HEADER SYSTEMS
KEY FEATURES
DC Sports 4-2-1 two-piece header systems delivers the same performace as our
one-piece systems in a two piece design that eases installation. Our 4-2-1 two-piece
header was rated “Best of the Test” in peak power, peak torque and average power gain
by Sport Compact Car magazine.
• Dyno tuned and tested against the competition for maximum performance
• CAD-rendered, design with threaded flanges for easy installation
• 4-2-1 design emphasizes low and mid-range power for street/strip applications
• CNC mandrel bends with welded fittings deliver perfect fit
• CNC-machined flanges and O-ring seals eliminate leaks
• Available in 100% T304 polished stainless steel (including flanges), or T409
stainless steel with ceramic coating
• Equal length primary piping ensures optimum tuning for more power across
the rpm range
• Comprehensive installation instructions, all necessary hardware
and decals included
• 50-state legal or pending legality
TWO-PIECE DESIGN FOR EASY
INSTALLATION, LOW END TORQUE
FOR STREET OR TRACK
3-1 HEADER SYSTEMS
KEY FEATURES
The increase of V6 applications in the sport compact market provided an
opportunity to design V-engine headers, and we responded with our 3-into-1
header designs. You will not find a 3-into-1 header system that fits as perfectly or
performs as well as DC Sports’ offerings.
• Dyno tuned and tested against the competition for maximum performance
• 3-into-1 design emphasizes a broad increase in power across RPM range
for street/track applications
• 50 state legal or pending legality
• Available in 100% T304 polished stainless steel (including flanges), or T409 Alloy
with ceramic coating
• CNC mandrel bends with robotically welded fittings deliver perfect fit
• Equal length primary piping ensures optimum tuning for more power across
the rpm range
• Unique merge collector design ensures smooth exhaust gas flow
• Comprehensive installation instructions, all necessary
hardware and decals included
CERAMIC COATING PROCESS
DC Sports’ proprietary ceramic coating is
the best in the business. Once our systems
are complete, they are subjected to a
thermal degrease and preliminary sandblast
to prep the surface for adhesion. Each
system is hand painted and once the proper
thickness of the coating is verified, it is
cured in ovens and fine-blasted to a high
luster finish.
10
K-SWAP HEADERS
Got a K20A2 in your EK or second-gen Integra and need a header? Don’t
waste money on a custom header for your engine-swapped Honda or
Acura when you can get guaranteed performance and a perfect fit with DC
Sports Hybrid headers!
• Direct-Fit headers install with no modifications
• Dyno tuned and tested for maximum performance
• CAD-rendered design eases installation
• Available in mild steel with ceramic coating
• For Off-Road use only
• CNC mandrel bends with robotically-welded fittings deliver perfect fit
• CNC-machined and threaded flanges eliminate leaks
• Equal length primary piping ensures optimum tuning of system
for more power across rpm range
• Comprehensive installation instructions, all necessary
hardware and decals included
KEY FEATURES
TURBO MANIFOLDS
• Direct-Fit headers install with no modifications
• Dyno tuned and tested for maximum performance
• CAD-rendered design eases installation
• Available in mild steel with ceramic coating
• For Off-Road use only
• CNC mandrel bends with robotically-welded fittings deliver perfect fit
• CNC-machined and threaded flanges eliminate leaks
• Equal length primary piping ensures optimum tuning of system for more power
across rpm range
• Comprehensive installation instructions, all necessary hardware and decals included
KEY FEATURES
DC Sports Turbo Manifolds
are the perfect upgrade
for customers looking
to extract the most
power from their factory
turbocharged vehicle.
Because of the high
temperature demands of
turbo applications, we use
special manufacturing techniques
to virtually eliminate the chance of failure,
including perparing the plasma cut materials for
welding, using a slower weld process and thicker rod for deeper weld penetration and purging the
inner tube sections with Argon gas to strengthen the backside of the welds.
COMPETITION PIPES
DC Sports Competition Pipes delete the catalytic converter to eliminate
restriction in the exhaust path and are dyno tuned to deliver incredible
performance gains for your factory turbocharged vehicle.
MAKE /MODEL YEAR PART# PRODUCT
DESCRIPTION APPLICATION NOTE CARB APPROVED50 STATE LEGAL*
X = Yes
ACURA
INTEGRA RS/LS/GS 90-91 AHC6003 4-2-1 CERAMIC HEADER, TWO PIECE X INTEGRA RS/ LS/ GS/ GS-R 92-93 AHC6005 4-2-1 CERAMIC HEADER, TWO PIECE X INTEGRA RS/ LS/ GS 94-01 AHC6006 4-2-1 CERAMIC HEADER, TWO PIECE X INTEGRA GS-R 94-99 AHC6007 4-2-1 CERAMIC HEADER, TWO PIECE X TSX 04-08 AHC6016 4-2-1 CERAMIC HEADER, TWO PIECE X INTEGRA GS-R 94-99 AHC6507 4-2-1 CERAMIC HEADER, ONE PIECE X INTEGRA GS-R 00-01 AHC6511 4-2-1 CERAMIC HEADER, ONE PIECE X RSX TYPE-S 02-06 AHC6514 4-2-1 CERAMIC HEADER, ONE PIECE X RSX BASE 02-06 AHC6515 4-2-1 CERAMIC HEADER, ONE PIECE X INTEGRA TYPE-R 97-01 AHC6604 4-1 CERAMIC HEADER, ONE PIECE X INTEGRA RS/ LS/ GS 94-01 AHC6606 4-1 CERAMIC HEADER, ONE PIECE X INTEGRA GS-R 94-99 AHC6607 4-1 CERAMIC HEADER, ONE PIECE X INTEGRA GS-R 00-01 AHC6611 4-1 CERAMIC HEADER, ONE PIECE X CL 3.2L 99-03 HHC5528 TWO 3-1 CERAMIC HEADERS A/T Only X CL TYPE S 01-03 HHC5528 TWO 3-1 CERAMIC HEADERS A/T Only X TL 3.2L 99-03 HHC5528 TWO 3-1 CERAMIC HEADERS A/T Only X TL TYPE S 01-03 HHC5528 TWO 3-1 CERAMIC HEADERS A/T Only X
CHEVY
CAVALIER 95-05 CHC3002 4-1 CERAMIC HEADER, ONE PIECE 2.2L Ecotec Pending COBALT 05-10 CHC3002 4-1 CERAMIC HEADER, ONE PIECE 2.0L & 2.4L Pending COBALT SS 05-07 CHC3002 4-1 CERAMIC HEADER, ONE PIECE Supercharged 2.0L Pending HHR 06-11 CHC3002 4-1 CERAMIC HEADER, ONE PIECE 2.2L Pending MALIBU / CLASSIC 97-05 CHC3002 4-1 CERAMIC HEADER, ONE PIECE 2.2L Pending
EAGLE
TALON ESI 95-99 MHC4001 4-2-1 CERAMIC HEADER, TWO PIECE 2.0L Pending
HONDA
CIVIC SI 02-05 AHC6515 4-2-1 CERAMIC HEADER, ONE PIECE X CIVIC DX/ LX/ EX/SI 88-91 HHC5002 4-2-1 CERAMIC HEADER, TWO PIECE X CRX DX/ SI 88-91 HHC5002 4-2-1 CERAMIC HEADER, TWO PIECE X PRELUDE SI 92-96 HHC5008 4-2-1 CERAMIC HEADER, TWO PIECE DOHC, Non-VTEC X PRELUDE VTEC 92-96 HHC5009 4-2-1 CERAMIC HEADER, TWO PIECE X ACCORD DX/ LX/ SE 90-93 HHC5011 4-2-1 CERAMIC HEADER, TWO PIECE X PRELUDE S 92-96 HHC5011 4-2-1 CERAMIC HEADER, TWO PIECE SOHC X ACCORD DX/ LX/ SE 94-97 HHC5012 4-2-1 CERAMIC HEADER, TWO PIECE 2 Bolt Converter Flange Only X CIVIC DX/ LX/ EX/ SI 92-95 HHC5013 4-2-1 CERAMIC HEADER, TWO PIECE X CIVIC EX ONLY 96-00 HHC5013 4-2-1 CERAMIC HEADER, TWO PIECE X DEL SOL S/ SI 93-97 HHC5013 4-2-1 CERAMIC HEADER, TWO PIECE X PRELUDE TYPE SH 97-01 HHC5014 4-2-1 CERAMIC HEADER, TWO PIECE X PRELUDE BASE 97-01 HHC5015 4-2-1 CERAMIC HEADER, TWO PIECE X ACCORD EX 90-93 HHC5016 4-2-1 CERAMIC HEADER, TWO PIECE X ACCORD EX 94-97 HHC5017 4-2-1 CERAMIC HEADER, TWO PIECE 4 Cyl. X ACCORD LX/ EX 98-02 HHC5018 4-2-1 CERAMIC HEADER, TWO PIECE excl. ULEV/LEV/TLEV X CIVIC EX ONLY 01-05 HHC5019 4-1 CERAMIC HEADER, ONE PIECE X S-2000 00-09 HHC5020 4-2-1 CERAMIC HEADER, ONE PIECE 2.0 & 2.2 X ACCORD LX / EX 03-07 HHC5022 4-2-1 CERAMIC HEADER, TWO PIECE excl. ULEV/LEV/TLEV
4cyl X FIT 07-08 HHC5023 4-1 CERAMIC HEADER, ONE PIECE X PRELUDE VTEC 92-96 HHC5029 4-2-1 CERAMIC HEADER, TWO PIECE 2.5'' Collector Pending CIVIC SI 99-00 HHC5504 4-2-1 CERAMIC HEADER, ONE PIECE X DEL SOL VTEC 94-97 HHC5504 4-2-1 CERAMIC HEADER, ONE PIECE X CIVIC DX/ LX/ EX/ SI 92-95 HHC5513 4-2-1 CERAMIC HEADER, ONE PIECE X CIVIC EX ONLY 96-00 HHC5513 4-2-1 CERAMIC HEADER, ONE PIECE X
CERAMIC HEADER APPLICATIONS
MAKE /MODEL YEAR PART# PRODUCT
DESCRIPTION APPLICATION NOTE CARB APPROVED50 STATE LEGAL*
X = Yes
HONDA (CONT.)
DEL SOL S/ SI 93-97 HHC5513 4-2-1 CERAMIC HEADER, ONE PIECE X CIVIC SI 06-11 HHC5524 4-2-1 CERAMIC HEADER, ONE PIECE 2DR / 4DR Pending ACCORD 98-02 HHC5528 TWO 3-1 CERAMIC HEADERS A/T Only X CIVIC SI 99-00 HHC5604 4-1 CERAMIC HEADER, ONE PIECE X DEL SOL VTEC 94-97 HHC5604 4-1 CERAMIC HEADER, ONE PIECE DOHC X CIVIC DX/ LX/ EX/ SI 92-95 HHC5613 4-1 CERAMIC HEADER, ONE PIECE M/T Only X CIVIC EX ONLY 96-00 HHC5613 4-1 CERAMIC HEADER, ONE PIECE M/T Only X DEL SOL S/ SI 93-97 HHC5613 4-1 CERAMIC HEADER, ONE PIECE M/T Only X
INFINITI
G35 COUPE 03-07 NHC4201 TWO 3-1 CERAMIC HEADERS 2 door X G35 SEDAN 03-06 NHC4201 TWO 3-1 CERAMIC HEADERS 4 door Incl. AWD X FX35 03-08 NHC4201 TWO 3-1 CERAMIC HEADERS X M35 06-08 NHC4201 TWO 3-1 CERAMIC HEADERS X G35 SEDAN 07-08 NHC4202 TWO 3-1 CERAMIC HEADERS 4 door Pending G37 COUPE 08-13 NHC4202 TWO 3-1 CERAMIC HEADERS 2 door Pending G37 SEDAN 09-13 NHC4202 TWO 3-1 CERAMIC HEADERS 4 door Pending
MITSUBISHI
ECLIPSE RS/ GS 95-99 MHC4001 4-2-1 CERAMIC HEADER, TWO PIECE 2.0L Pending LANCER 08-10 MHC4005 4-1 CERAMIC HEADER, ONE PIECE FED Version Only Pending
NISSAN
350Z 03-06 NHC4201 TWO 3-1 CERAMIC HEADERS X 350Z 07-08 NHC4202 TWO 3-1 CERAMIC HEADERS Pending 370Z 09-13 NHC4202 TWO 3-1 CERAMIC HEADERS Pending 240SX 91-94 NHC4203 4-2-1 CERAMIC HEADER, ONE PIECE KA24DE(DOHC) Pending VERSA 07-12 NHC7042 4-2-1 CERAMIC HEADER, ONE PIECE 1.8L Pending SENTRA 07-08 NHC7042 4-2-1 CERAMIC HEADER, ONE PIECE 2.0L Pending
OLDSMOBILE
ALERO 99-04 CHC3002 4-1 CERAMIC HEADER, ONE PIECE 2.2L Pending
PONTIAC
G5 07-09 CHC3002 4-1 CERAMIC HEADER, ONE PIECE 2.2L & 2.4L Pending GRAND AM 99-05 CHC3002 4-1 CERAMIC HEADER, ONE PIECE 2.2L Pending SUNFIRE 95-05 CHC3002 4-1 CERAMIC HEADER, ONE PIECE 2.2L Pending
SATURN
ION COUPE 04-07 CHC3002 4-2-1 CERAMIC HEADER, TWO PIECE 2.2L Pending ION SEDAN 03-05 CHC3002 4-2-1 CERAMIC HEADER, TWO PIECE 2.2L Pending
SCION
xA / xB 03-07 SHC4401 4-1 CERAMIC HEADER, ONE PIECE X
xD 08-13 SHC4404 4-2-1 CERAMIC HEADER, ONE PIECE 1.8L Pending
TOYOTA
ECHO 00-05 SHC4401 4-1 CERAMIC HEADER, ONE PIECE X MATRIX 09-13 SHC4404 4-2-1 CERAMIC HEADER, ONE PIECE 1.8L Pending COROLLA 09-13 SHC4404 4-2-1 CERAMIC HEADER, ONE PIECE 1.8L Pending CELICA GT 00-05 THC4402 4-2-1 CERAMIC HEADER, ONE PIECE X CELICA GT-S 00-03.3 THC4403 4-2-1 CERAMIC HEADER, ONE PIECE Non-Air Injection
Prod Dates 8/99 thru 3/03 X MATRIX XRS 02-03.3 THC4403 4-2-1 CERAMIC HEADER, ONE PIECE Non-Air Injection
Prod Dates 8/99 thru 3/04 X COROLLA 03-08 THC4405 4-2-1 CERAMIC HEADER, ONE PIECE C, LE, S no XRS Pending MATRIX XR 03-06 THC4405 4-2-1 CERAMIC HEADER, ONE PIECE 2WD Pending YARIS 07-11 THC4407 4-1 CERAMIC HEADER, ONE PIECE Incl. S-Model Pending
CERAMIC HEADER APPLICATIONS (CONT.)
MAKE /MODEL YEAR PART# PRODUCT
DESCRIPTION APPLICATION NOTE CARB APPROVED50 STATE LEGAL*
X = Yes
ACURA
NSX 91-94 ADP6009 ADAPTER FOR 91-94 MODEL To Use with AHS6009 NSX 91-05 AHS6009 TWO 3-1 POLISHED S.S. HEADERS 91-94 Models Need
ADP6009 X RSX TYPE-S 02-06 AHS6514 4-2-1 POLISHED S.S. HEADER, ONE PC X RSX BASE 02-06 AHS6515 4-2-1 POLISHED S.S. HEADER, ONE PC X INTEGRA RS/ LS/ GS 94-01 AHS6606 4-1 POLISHED S.S. HEADER, ONE PC X INTEGRA GS-R 94-99 AHS6607 4-1 POLISHED S.S. HEADER, ONE PC X
HONDA
CIVIC SI 02-05 AHS6515 4-2-1 POLISHED S.S. HEADER, ONE PC X CIVIC DX/ LX/ EX/ SI 92-95 HHS5013 4-2-1 POLISHED S.S. HEADER, TWO PC X CIVIC EX ONLY 96-00 HHS5013 4-2-1 POLISHED S.S. HEADER, TWO PC X DEL SOL S/ SI 93-97 HHS5013 4-2-1 POLISHED S.S. HEADER, TWO PC X PRELUDE BASE 97-01 HHS5015 4-2-1 POLISHED S.S. HEADER, TWO PC X S-2000 00-09 HHS5020 4-2-1 POLISHED S.S. HEADER, ONE PC 2.0 & 2.2 X ACCORD 03-07 HHS5022 4-2-1 POLISHED S.S. HEADER, TWO PC 4 Cyl. X CIVIC SI 99-00 HHS5504 4-2-1 POLISHED S.S. HEADER, TWO PC X DEL SOL VTEC 94-97 HHS5504 4-2-1 POLISHED S.S. HEADER, TWO PC DOHC X CIVIC SI 99-00 HHS5604 4-1 POLISHED S.S. HEADER, ONE PC X CIVIC SI 06-11 HHS5524 4-2-1 CERAMIC HEADER, ONE PIECE 2DR / 4DR Pending DEL SOL VTEC 94-97 HHS5604 4-1 POLISHED S.S. HEADER, ONE PC DOHC X CIVIC DX/ LX/ EX/ SI 92-95 HHS5613 4-1 POLISHED S.S. HEADER, ONE PC M/T Only X CIVIC EX 96-00 HHS5613 4-1 POLISHED S.S. HEADER, ONE PC M/T Only X DEL SOL S/ SI 93-97 HHS5613 4-1 POLISHED S.S. HEADER, ONE PC M/T Only X
INFINITI
G35 COUPE 03-07 NHS4201 TWO 3-1 POLISHED S.S. HEADERS 2 door X G35 SEDAN 03-06 NHS4201 TWO 3-1 POLISHED S.S. HEADERS 4 door Incl. AWD X FX35 03-08 NHS4201 TWO 3-1 POLISHED S.S. HEADERS X M35 06-08 NHS4201 TWO 3-1 POLISHED S.S. HEADERS X G35 SEDAN 07-08 NHS4202 TWO 3-1 POLISHED S.S. HEADERS 4 door Pending G37 COUPE 08-12 NHS4202 TWO 3-1 POLISHED S.S. HEADERS 2 door Pending G37 SEDAN 09-13 NHS4202 TWO 3-1 POLISHED S.S. HEADERS 4 door Pending
NISSAN
350Z 03-06 NHS4201 TWO 3-1 POLISHED S.S. HEADERS X 350Z 07-08 NHS4202 TWO 3-1 POLISHED S.S. HEADERS Pending 370Z 09-13 NHS4202 TWO 3-1 POLISHED S.S. HEADERS Pending
STAINLESS STEEL HEADER APPLICATIONS
*NOTES: For up to date CARB legality information and application fitment please contact us at [email protected] / (626) 968-5147 or your local authorized dealer DC SPORTS STAINLESS STEEL HEADERS are constructed of full stainless steel including the flanges.
flashBack
MAKE /MODEL YEAR PART# PRODUCT
DESCRIPTION APPLICATION NOTE CARB APPROVED50 STATE LEGAL
ACURA
INTEGRA TYPE-R 94-01 AHC6612 4-1 CERAMIC RACE HEADER, ONE PIECE 2.5" Collector Race use only
RSX TYPE-S 02-06 AHR6514 4-2-1 CERAMIC RACE HEADER, ONE PIECE Race use only
INTEGRA 94-01 AHR6516 4-2-1 CERAMIC “K SERIES SWAP”
RACE HEADER, ONE PIECE K20A2 Race use only
INTEGRA TYPE-R 94-01 AHS6612 4-1 POLISHED S.S.
RACE HEADER, ONE PC 2.5" Collector Race use only
RSX TYPE-S 02-06 ASR6514 4-2-1 POLISHED S.S.
RACE HEADER, ONE PC Race use only
RSX BASE 02-06 HHR6515 4-2-1 CERAMIC RACE HEADER, ONE PIECE Race use only
HONDA
ACCORD 94-97 AHR6516 4-2-1 CERAMIC “K SERIES SWAP”
RACE HEADER, ONE PIECE K24 Race use only
CIVIC/ CRX 88-91 AHR6516 4-2-1 CERAMIC “K SERIES SWAP”
RACE HEADER, ONE PIECE K20A2 Race use only
CIVIC 92-95 AHR6516 4-2-1 CERAMIC “K SERIES SWAP”
RACE HEADER, ONE PIECE K20A2 Race use only
CIVIC 96-00 AHR6516 4-2-1 CERAMIC “K SERIES SWAP”
RACE HEADER, ONE PIECE K20A2 Race use only
CIVIC EX ONLY 01-05 HHR5019 4-2-1 CERAMIC HEADER, TWO PIECE Race use only
CIVIC 96-00 HHR5514 4-2-1 CERAMIC HEADER, ONE PIECE CX/DX/HX/LX Race use only
CIVIC SI 06-11 HHR5523 4-2-1 CERAMIC RACE HEADER K20Z3 Recommended for use
with SCS7034 Race use only
CIVIC SI 99-00 HHR5604 4-1 CERAMIC COATED RACE HEADER, ONE PC. 2.5" Collector Race use only
DEL SOL VTEC 94-97 HHR5604 4-1 CERAMIC COATED RACE HEADER, ONE PC. 2.5" Collector, DOHC Race use only
CIVIC SI 02-05 HHR6515 4-2-1 CERAMIC RACE HEADER, ONE PIECE K20A2 Race use only
CIVIC SI 06-11 HSR5523 4-2-1 POLISHED S.S. RACE HEADER K20Z3 Recommended for use
with SCS7034 Race use only
HYUNDAI
TIBURON 03-06 HHR4501 TWO 3-1 CERAMIC HEADERS V6 A/T&M/T(5&6 Speed) Race use only
MITSUBISHI
ECLIPSE RS/ GS 00-04 MHR4003 4-2-1 CERAMIC RACE HEADER 2.4L Race use only
NISSAN
SENTRA SE-R/ SPEC. V 02-05 NHR4202 4-2-1 CERAMIC RACE HEADER,
THREE PIECE Race use only
240SX 95-98 NHR4205 4-2-1 CERAMIC RACE HEADER, ONE PIECE Race use only
SCION
tC 05-10 SHR4402 4-2-1 CERAMIC RACE HEADER, ONE PIECE 2.4L Race use only
xB 08-12 SHR4403 4-2-1 CERAMIC RACE HEADER, ONE PIECE 2.4L Race use only
tC 11-13 SHR4405 4-2-1 CERAMIC RACE HEADER, ONE PIECE 2.5L Race use only xB 08-12 SSR4403 4-2-1 POLISHED S.S. RACE HEADER, ONE PIECE 2.4L Race use only tC 05-10 SSR4402 4-2-1 POLISHED S.S. RACE HEADER, ONE PIECE 2.4L Race use only FRS 12-13 SSR7049 4-1 POLISHED S.S. RACE HEADER, ONE PIECE 2.0L Race use only
SUBARU 4-1 CERAMIC RACE HEADER, ONE PIECE 2.0L Race use only
BRZ 12-13 SSR7049 4-1 POLISHED S.S. RACE HEADER, ONE PIECE 2.0L Race use only
DC SPORTS RACE HEADERS APPLICATIONS
NOTES: DC SPORTS RACE HEADERS are for off road use only. DC SPORTS RACE HEADERS are NOT C.A.R.B approved.
flashBack
2011, DC SPORTS
Headquarters, CA
16
MAKE /MODEL YEAR PART# PRODUCT
DESCRIPTION APPLICATION NOTE CARB APPROVED50 STATE LEGAL
HONDA
Civic EX, LX 12-14 HCD5526 POLISHED S.S. CAT-DELETE Primary
HYUNDAI
GENESIS COUPE 09-13 HCD6602 POLISHED S.S. DUAL CAT-DELETE 6 Cyl. GENESIS COUPE TURBO 09-13 HDP6601 POLISHED S.S. TURBO DOWNPIPE 4 Cyl, Turbo
MITSUBISHI
EVOLUTION X 08-13 MCD6011 POLISHED S.S. CAT-DELETE LANCER RALLIART 09-13 MCD6011 POLISHED S.S. CAT-DELETE EVOLUTION VIII, IX 03-07 MDP6010 POLISHED S.S. TURBO DOWNPIPE EVOLUTION X 08-13 MIP6011 POLISHED ALUMINUM UPPER INTERCOOLER HARD
PIPE KIT
LANCER RALLIART 09-13 MIP6011 POLISHED ALUMINUM UPPER INTERCOOLER HARD PIPE KIT
EVOLUTION VIII, IX 03-07 MTM6007 POLISHED S.S. TURBO MANIFOLD
NISSAN
240SX w/SR20DET 89-98 NDP4203 POLISHED S.S. TURBO DOWNPIPE S13/S14/S15 Motor 240SX w/SR20DET 89-98 NTM4203 POLISHED S.S. TURBO MANIFOLD S13/S14/S15 Motor
SAAB
92X- AERO 05-06 SDP4301 POLISHED S.S. TURBO DOWNPIPE 92X- AERO 05-06 STH4301 POLISHED S.S. TURBO MANIFOLD 92X- AERO 05-06 STU4301 POLISHED S.S. TURBO UP-PIPE
SCION
FRS 13-Up SCD7049 POLISHED S.S. CAT-DELETE FRS 13-Up SOP7049 POLISHED S.S. OVER PIPE
SUBARU
BRZ 13-Up SCD7049 POLISHED S.S. CAT-DELETE WRX/ WRX STi 02-07 SDP4301 POLISHED S.S. TURBO DOWNPIPE
WRX SEDAN 08-13 SDP4302 POLISHED S.S. TURBO DOWNPIPE 4DR.
WRX WAGON 08-13 SDP4302 POLISHED S.S. TURBO DOWNPIPE 5DR.
WRX STi 08-13 SDP4302 POLISHED S.S. TURBO DOWNPIPE 5DR.
LEGACY GT 05-09 SDP4302 POLISHED S.S. TURBO DOWNPIPE 2.5L
BRZ 13-Up SOP7049 POLISHED S.S. OVER PIPE WRX/ WRX STi 02-07 STH4301 POLISHED S.S. TURBO MANIFOLD
WRX SEDAN 08-13 STH4301 POLISHED S.S. TURBO MANIFOLD 4DR.
LEGACY GT 05-09 STH4301 POLISHED S.S. TURBO MANIFOLD 2.5L
WRX/ WRX STi 02-07 STU4301 POLISHED S.S. TURBO UP-PIPE
WRX WAGON 08-13 STU4301 POLISHED S.S. TURBO UP-PIPE 5DR.
WRX STi 08-13 STU4301 POLISHED S.S. TURBO UP-PIPE 5DR.
DC SPORTS TURBO MANIFOLDS & COMPETITION PIPES
NOTES: DC SPORTS STAINLESS STEEL TURBO MANIFOLD & COMPETITION PIPES are constructed of full stainless steel including the flanges.
flashBack
UNIVERSAL AIR FILTERS
PROVIDING A BREATH OF
FRESH POWER
NO RUBBER CONSTRUCTION!
• The top and base are resistant to deterioration and tearing.
• Base is spun into a velocity stack radius to provide improved airflow.
• The Aluminum is not susceptible to heat cracking.
• Housing is resistant to damage in a backfire condition.
• Promote the harmonics and provide a more aggressive intake tone.
• The Aluminum is lighter than rubber by 30%.
• The bonding agent is over 100% stronger than rubber.
KEY FEATURES
Synthetic Micronic Cloth
element is completely washable
and reusable.
One-piece velocity stack base
improving the volume and flow
characteristics.
Aluminum housing for strength
and durability.
Extra deep filter pleats increase
filter surface area, improving
filtration while maximizing flow.
Stainless Steel wire mesh is
corrosion resistant which will
enhance the life and appearance
of the filter.
18
SHORT RAM
• Designed for maximum power gains • Provides performance and value
• Increases horsepower and torque
• Easy to install in the engine bay
• Improves throttle response
• Air intake velocity is greatly increased
• Re-locates filter to outside the engine compartment for
cooler air ingestion
• Designed for maximum power gains
• Increases horsepower and torque
• Improves throttle response
• Provides lower air intake temperatures to the engine
• Tuned inlet pipe for optimum performance gains
• Comes in a multi-piece kit for ease of installation (where necessary)
AIR INTAKE SYSTEMS
PROVIDING A BREATH
OF FRESH POWER
DC Sport Air Intake Systems provide the best of both worlds in heat
protection and improved breathability. Every kit includes a air filter that
requires no oil, therefore no chance in contaminating the mass air flow
sensor which can result in loss of power and higher fuel consumption.
KEY FEATURES
Filter Intake Tube:
• One piece aluminum alloy construction.
• Corrosion resistant.
• Power coated for durability.
Entire Unit:
• No modifications necessary, direct bolt on.
• Improves throttle response.
• Increases horse power without increasing fuel consumption.
• Cuts OE intake system weight by more than half.
• Keeping with the intent design of OE, but making
it more efficient.
Air Filter:
• No oil necessary for filtration, therefore no chance in
contaminating the Mass Air Follow
Sensor which can result in loss of power and higher fuel consumption.
• Washable and reusable.
• Filtration as small as one micron (0.00039 inch)
• Aluminum alloy construction, making it immune to corrosion.
• Built in velocity stack to dramatically increase air flow rates.
• Built in funnel top to direct air flow into the velocity stack.
• Stainless steel mesh to aid in strength and longevity
of the filter filament.
1. Powder coated aluminum filter
intake tube
2. Performance filter
3. Silicon hoses
4. Hose clamps
5. Screws & washers
MAKE /MODEL YEAR PART# PRODUCT
DESCRIPTION APPLICATION NOTE CARB APPROVED50 STATE LEGAL
X = Yes
ACURA
INTEGRA (ALL) 90-93 SRI6003 Short Ram Intake System uses DCF300 Filter X INTEGRA LS, RS 94-01 SRI6006 Short Ram Intake System uses DCF300 Filter X RSX TYPE-S 02-06 SRI6514 Short Ram Intake System uses DCF350 Filter X RSX 02-06 SRI6515 Short Ram Intake System uses DCF300 Filter Base Model X ILX 13-Up SRI7048 Short Ram Intake System uses DCF300 Filter Pending
DODGE
NEON SRT-4 03-05 SRI2101 Short Ram Intake System uses DCF250 Filter X
FORD
FOCUS 2.0L; 4CYL. 12-13 SRI9001 Short Ram Intake System uses DCF300 Filter S; SE; SEL;
Titanium Model only Pending
HONDA
CRV 02-04 SRI5010 Short Ram Intake System uses DCF300 Filter X FIT 07-08 SRI5023 Short Ram Intake System uses DCF250 Filter X DEL SOL 93-97 SRI5516 Short Ram Intake System uses DCF275 Filter Pending Civic DX,LX,EX,SI 92-95 SRI5516 Short Ram Intake System uses DCF275 Filter X Civic SI 06-11 SRI5524 Short Ram Intake System uses DCF300 Filter X Civic DX, LX, EX 06-11 SRI5525 Short Ram Intake System uses DCF250 Filter X Civic Si 02-05 SRI6516 Short Ram Intake System uses DCF300 Filter X Civic Si 12-13 SRI7048 Short Ram Intake System uses DCF300 Filter Pending
HYUNDAI
TIBURON 4CYL. 2003 SRI4503 Short Ram Intake System uses DCF300 Filter X
INFINITI
G35 03-07 SRI4201 Short Ram Intake System uses DCF300 Filter Rectangular MAF X G35 03-06 SRI4201C Short Ram Intake System uses DCF300 Filter Circular MAF X G35 07-08 SRI4205 Short Ram Intake System uses DCF275 Filter 3.5L 306HP Dual Intake X
LEXUS
LS430 04-05 SRI4500 Short Ram Intake System uses DCF300 Filter X GS300 06-08 SRI4601 Short Ram Intake System uses DCF300 Filter
IS250/ IS350 06-09 SRI4700 Short Ram Intake System uses DCF350 Filter
IS300 00-05 SRI4800 Short Ram Intake System uses DCF275 Filter X
MAZDA
MAZDASPEED 3 07-10 SRI4106 Short Ram Intake System uses DCF275 Filter Turbo Pending MAZDA 3 10-12 SRI4107 Short Ram Intake System uses DCF275 Filter Pending
MITSUBISHI
Evolution VIII, IX 03-07 SRI6007 Short Ram Intake System uses DCF450 Filter X Lancer 08-12 SRI6013A Short Ram Intake System uses DCF250 Filter 2.0L; 2.4L A/T X Lancer 08-12 SRI6013M Short Ram Intake System uses DCF250 Filter 2.0L; 2.4L M/T X
NISSAN
JUKE 11-13 SRI1208 Short Ram Intake System uses DCF300 Filter Turbo Pending 350Z 03-06 SRI4201 Short Ram Intake System uses DCF300 Filter Pending 240SX 89-94 SRI4203 Short Ram Intake System uses DCF300 Filter W/ SR20DET
240SX 95-96 SRI4204 Short Ram Intake System uses DCF300 Filter w/ Heat Shield X 350Z 07-08 SRI4206 Short Ram Intake System uses DCF300 Filter Dual Intake X ALTIMA, 4CYL. 07-12 SRI4209 Short Ram Intake System uses DCF300 Filter CARB Approved exl.
SULEV Model X ALTIMA, 6CYL. 07-12 SRI4210 Short Ram Intake System uses DCF300 Filter X CUBE 09-12 SRI7046 Short Ram Intake System uses DCF275 Filter Auto CVT Tranny Only Pending
DC SPORTS SHORT RAM INTAKE SYSTEM
DC SPORTS SHORT RAM INTAKE SYSTEM (CONT.)
MAKE /MODEL YEAR PART# PRODUCT
DESCRIPTION APPLICATION NOTE CARB APPROVED50 STATE LEGAL
X = Yes
SCION
xA 04-07 SRI4400 Short Ram Intake System uses DCF250 Filter X xB 04-07 SRI4401 Short Ram Intake System uses DCF275 Filter X iQ 12-13 SRI4408 Short Ram Intake System uses DCF250 Filter
SUBARU
IMPREZA WRX / STI 02-07 SRI4301 Short Ram Intake System uses DCF300 Filter X
TOYOTA
COROLLA XRS 06-07 SRI4410 Short Ram Intake System uses DCF275 Filter
NOTES: For up to date CARB legality information and application fitment please contact us at [email protected] / (626) 968-5147 or your local authorized dealer
flashBack
2013, Honda Day, ATCO Raceway, New Jersey
MAKE /MODEL YEAR PART# PRODUCT
DESCRIPTION APPLICATION NOTE CARB APPROVED50 STATE LEGAL*
X = Yes
ACURA
CL 01-03 CAI5527 Cold Air Intake System uses DCF300 Filter Pending TL 02-03 CAI5527 Cold Air Intake System uses DCF300 Filter Pending TL 04-08 CAI5529 Cold Air Intake System uses DCF300 Filter X INTEGRA LS, RS 94-01 CAI6006 Cold Air Intake System uses DCF250 Filter X INTEGRA GS-R 94-01 CAI6007 Cold Air Intake System uses DCF275 Filter X TSX 04-08 CAI6016 Cold Air Intake System uses DCF300 Filter X TSX V6 10-12 CAI6017 Cold Air Intake System uses DCF300 Filter CAI converts to SRI X TSX 09-10 CAI6018 Cold Air Intake System uses DCF300 Filter 2.4L Pending INTEGRA TYPE-R 97-01 CAI6604 Cold Air Intake System uses DCF300 Filter X ILX 13-Up CAI7048 Cold Air Intake System uses DCF300 Filter Pending
CHEVY
COBALT SS ECOTEC 05-07 CAI3002 Cold Air Intake System uses DCF300 Filter SS Supercharged X COBALT ECOTEC 05-07 CAI3003 Cold Air Intake System uses DCF300 Filter 2.2L
SPARK 13-Up CAI3004 Cold Air Intake System uses DCF250 Filter Pending
FORD
FIESTA 11-13 CAI9000 Cold Air Intake System uses DCF250 Filter Pending
HONDA
Civic DX, LX, CX 96-00 CAI5013 Cold Air Intake System uses DCF250 Filter X PRELUDE 97-01 CAI5014 Cold Air Intake System uses DCF300 Filter X ACCORD 4CYL. 98-02 CAI5018 Cold Air Intake System uses DCF250 Filter CARB Approved exl.
SULEV Model X Civic DX, LX, EX 01-05 CAI5019A Cold Air Intake System uses DCF250 Filter A/T X Civic DX, LX, EX 01-05 CAI5019M Cold Air Intake System uses DCF250 Filter M/T X S2000 00-05 CAI5020 Cold Air Intake System uses DCF300 Filter X S2000 06-09 CAI5021 Cold Air Intake System uses DCF300 Filter X ACCORD 4CYL. 03-07 CAI5022 Cold Air Intake System uses DCF300 Filter CARB Approved exl.
SULEV Model W/ MAF Sensor
X FIT 07-08 CAI5023 Cold Air Intake System uses DCF250 Filter M/T only X Civic EX, HX 96-00 CAI5513 Cold Air Intake System uses DCF250 Filter X Civic DX,LX,EX,SI 92-95 CAI5516 Cold Air Intake System uses DCF275 Filter X DEL SOL 93-97 CAI5516 Cold Air Intake System uses DCF275 Filter Pending Civic Si 06-11 CAI5524 Cold Air Intake System uses DCF300 Filter Pending Civic DX, LX, EX 06-11 CAI5525 Cold Air Intake System uses DCF250 Filter X ACCORD 6CYL. 98-02 CAI5528 Cold Air Intake System uses DCF275 Filter X ACCORD 6CYL. 03-07 CAI5529 Cold Air Intake System uses DCF300 Filter X ACCORD 4CYL. 08-12 CAI5530 Cold Air Intake System uses DCF300 Filter Pending Civic Si 99-00 CAI5604 Cold Air Intake System uses DCF300 Filter DOHC B16A X Civic Si 02-05 CAI6516 Cold Air Intake System uses DCF275 Filter X Civic Si 12-13 CAI7048 Cold Air Intake System uses DCF300 Filter Pending
HYUNDAI
TIBURON 6CYL 03-08 CAI4501 Cold Air Intake System uses DCF275 Filter X TIBURON 4CYL 04-08 CAI4502 Cold Air Intake System uses DCF275 Filter X TIBURON 4CYL 2003 CAI4503 Cold Air Intake System uses DCF275 Filter X ACCENT 12-13 CAI4504 Cold Air Intake System uses DCF275 Filter 1.6L; 4Cyl. Pending VELOSTER 12-13 CAI4504 Cold Air Intake System uses DCF275 Filter 1.6L; 4Cyl. Pending
KIA Pending
FORTE KOUP 09-12 CAI3001 Cold Air Intake System uses DCF300 Filter 2.0L; 2.4L Pending
MAZDA
MAZDASPEED 6 06-08 CAI4101 Cold Air Intake System uses DCF275 Filter Turbo X 6 03-08 CAI4102 Cold Air Intake System uses DCF275 Filter CARB Approved exl.
SULEV Model 4 CYL
X
MAKE /MODEL YEAR PART# PRODUCT
DESCRIPTION APPLICATION NOTE CARB APPROVED50 STATE LEGAL*
X = Yes
MAZDA
6 03-08 CAI4103 Cold Air Intake System uses DCF275 Filter V6 3.0L X 3 04-09 CAI4105 Cold Air Intake System uses DCF275 Filter 2.0L, 2.3L
MAZDASPEED 3 07-11 CAI4106 Cold Air Intake System uses DCF275 Filter Turbo X MX-5 06-09 CAI4108 Cold Air Intake System uses DCF275 Filter X 2 11-13 CAI4109 Cold Air Intake System uses DCF275 Filter M/T only Pending
MITSUBISHI
ECLIPSE 4CYL 06-11 CAI4006 Cold Air Intake System uses DCF300 Filter X ECLIPSE GT 06-11 CAI4007A Cold Air Intake System uses DCF275 Filter A/T V6 X ECLIPSE GT 06-11 CAI4007M Cold Air Intake System uses DCF300 Filter M/T V6 X LANCER 02-06 CAI6001 Cold Air Intake System uses DCF275 Filter M/T X LANCER RALLIART 04-06 CAI6002 Cold Air Intake System uses DCF275 Filter M/T X
NISSAN
VERSA 07-12 CAI1207 Cold Air Intake System uses DCF250 Filter X JUKE 11-13 CAI1208 Cold Air Intake System uses DCF275 Filter Turbo Pending SENTRA SE-R SPEC-V 02-06 CAI4202 Cold Air Intake System uses DCF275 Filter X ALTIMA 4CYL 02-06 CAI4207 Cold Air Intake System uses DCF300 Filter CARB Approved exl.
SULEV Model X
ALTIMA 6CYL 02-06 CAI4208 Cold Air Intake System uses DCF350 Filter X MAXIMA 6CYL 04-06 CAI4208 Cold Air Intake System uses DCF350 Filter Rectangular MAF X MAXIMA 6CYL 07-08 CAI4213 Cold Air Intake System uses DCF350 Filter X SENTRA 05-06 CAI4214 Cold Air Intake System uses DCF275 Filter CARB Approved exl.
SULEV Model
1.8L
X SENTRA 07-12 CAI4215 Cold Air Intake System uses DCF300 Filter 2.0L X
SCION
xB 04-07 CAI4401 Cold Air Intake System uses DCF250 Filter X xD 08-11 CAI7043 Cold Air Intake System uses DCF275 Filter
xB 08-12 CAI7044 Cold Air Intake System uses DCF275 Filter tC 11-13 CAI7050 Cold Air Intake System uses DCF300 Filter tC 05-06 CAI4402 Cold Air Intake System uses DCF275 Filter tC 07-10 CAI4403 Cold Air Intake System uses DCF275 Filter
SUBARU X
IMPREZA WRX / STI 02-07 CAI4301 Cold Air Intake System uses DCF275 Filter X
TOYOTA
YARIS S 07-09 CAI4407 Cold Air Intake System uses DCF250 Filter CAMRY 4CYL 07-09 CAI4408 Cold Air Intake System uses DCF300 Filter CAMRY 6CYL 07-09 CAI4409 Cold Air Intake System uses DCF300 Filter MATRIX XR 05-08 CAI4412 Cold Air Intake System uses DCF275 Filter
DC SPORTS - COLD AIR INTAKE SYSTEM (CONT.)
*NOTES: For up to date CARB legality information and application fitment please contact us at [email protected] / (626) 968-5147 or your local authorized dealer
MAKE /MODEL YEAR PART# INLET PRODUCT
DESCRIPTION APPLICATION NOTE
UNIVERSAL
Universal ALL DCF250 2.50” Inlet Dry Element No-Oil Replacement Air Filter Base 6” Top 5” 6”W 6”H Universal ALL DCF275 2.75” Inlet Dry Element No-Oil Replacement Air Filter Base 6" Top 5" 6"W 6"H Universal ALL DCF275S 2.75” Inlet Dry Element No-Oil Replacement Air Filter Base 5" Top 4" 6"W 6"H Universal ALL DCF300 3.00” Inlet Dry Element No-Oil Replacement Air Filter Base 6" Top 5" 6"W 6"H Universal ALL DCF275S 3.00” Inlet Dry Element No-Oil Replacement Air Filter Base 5" Top 4" 6"W 6"H
24
EXHAUST SYSTEMS
DC Sports exhaust systems are CNC Mandrel bent from T304 stainless
steel, hand welded, feature a straight-through muffler core, includes solid
hangers that utilize the factory mounting locations and includes complete
hardware for ease of installation. We made a significant investment in
automated exhaust manufacturing equipment that enabled us to reduce the
cost of almost all of our exhaust system applications! You will not find a better
performing or fitting stainless steel exhaust system for the price.
HAND TIG WELDS
SOLID HANGERS
4” TIPS W/ DC
SPORTS LOGO
BOLTED FLANGES
KEY FEATURES
• Individually tuned and dyno-tested for maximum performance
• Uses factory mounting locations for ease of installation and
solid hangers for added durability
• Late model systems meet 95 dB exhaust noise
restriction requirements
• CNC mandrel bends with TIG welded fittings deliver perfect fit
• 304 Stainless-steel piping with TIG-welded,
CNC-machined flanges
• Straight-through muffler core maximizes power and delivers an
aggressive exhaust note
• Street-inspired design includes four-inch straight-cut tip with rolled
DC Sports logo
• Comprehensive installation instructions, all necessary hardware and
decals included
We use Flanges instead of slip joints to attach the exhaust piping for the best durability and to eliminate leaks.
Our hand Welding process ensures the best quality seams while reducing the overall cost of manufacturing.
We use Solid Hangers instead of hollow hangers for added strength.
SINGLE CANISTER EXHAUST, DUAL TIP
SINGLE CANISTER EX
HAUST
Due to certain fitment requirements and routing specifications, DC Sports manufactures a single canister, dual tip exhaust
system for the Nissan 350Z and other select applications.
Like all our engine breathing products, DC Sports exhaust
systems are dyno tuned and tested to outperform
all comparable systems on the market. Our
Single Canister, dual tip systems feature a
large, transverse-mounted polished oval
canister with dual straight-cut,
four-inch tips with rolled DC Sports
logos so there is no
mistaking whether you have the
best exhaust on the market.
DC SPORTS race-inspired Dual Canister systems are available for V6
and select four-cylinder applications. Our Dual Canister systems
feature twin polished round barrel-style canisters that
deliver an aggressive growl through polished four-inch,
26
DUAL CANISTER EXHAUST
DC SPORTS race-inspired Dual Canister systems are available
for V6 and select four-cylinder applications. Our Dual Canister
systems feature twin polished round barrel-style canisters that
deliver an aggressive growl through polished four-inch, straight
cut exhaust tips.
UNIVERSAL MUFFLERS
SILENCERS
• Available in 2.5 and 3 inch diameters for naturally aspirated and
turbo applications
• 100% polished 304 stainless steel barrel-style canister with
high-flow peforated core
• Polished four-inch straight-cut tip with rolled DC Sports logo
• Reduce exhaust decibel levels
• Simple installation and removal
• Available for most DC Sports exhaust with 4 inch tips
KEY FEATURES
KEY FEATURES
DC SPORTS Universal Muffler designs adapt to virtually any vehicle and are available
in 2.5” and 3” diameters for naturally aspirated or turbo applications. Our Universal
Mufflers feature 100% 304 stainless steel construction, a straight-through perforated
muffler core for superior flow and a 4” straight cut exhaust tip with a rolled DC
Sports logo. It’s true DC quality for practically any application.
DC SPORTS exhaust canister silencers fit inside the muffler
tip and baffle exhaust noise to reduce overall decibel
levels. Our silencers include a pre-drilled hole that
aligns with a pre-drilled hole in our muffler canisters and include all
28
MAKE /MODEL YEAR PART# PRODUCT
DESCRIPTION APPLICATION NOTE
ACURA
ILX 13-Up SCS7051 Single Canister System, Stainless Steel Cat-Back Exhaust 4cyl. INTEGRA GS/ LS /RS 2 DR. 94-99 SCS8008 Single Canister System, Stainless Steel Cat-Back Exhaust * INTEGRA GSR 2 DR. 00-01 SCS8008 Single Canister System, Stainless Steel Cat-Back Exhaust * INTEGRA TYPE-R 97-01 SCS8008 Single Canister System, Stainless Steel Cat-Back Exhaust * INTEGRA GSR 2 DR. 94-99 SCS8009 Single Canister System, Stainless Steel Cat-Back Exhaust * RSX TYPE-S 02-06 SCS8010 Single Canister System, Stainless Steel Cat-Back Exhaust * RSX BASE 02-06 SCS8011 Single Canister System, Stainless Steel Cat-Back Exhaust *
CHEVROLET
COBALT LS/ LT 2.2L ECOTEC N/A 05-08 SCS7033 Single Canister System, Stainless Steel Cat-Back Exhaust 2DR. & 4DR.
DODGE
NEON SRT-4 03-05 DTS9101 Dual Tip Stainless Steel Cat-Back Exhaust System *
CALIBER 1.8, 2.0 & 2.4L 07-09 SCS8017 Single Canister System, Stainless Steel Cat-Back Exhaust Discontinued / Limited Qty Available excl. Turbo and AWD Models
FORD
FIESTA 11-12 SCS9000 Single Canister System, Stainless Steel Cat-Back Exhaust 4dr. H/B *
HONDA
CIVIC 2 DR. & 4 DR. ALL 92-95 SCS7020 Single Canister System, Stainless Steel Cat-Back Exhaust No H/B * CIVIC 2 DR. & 4 DR. EX 96-98 SCS7020 Single Canister System, Stainless Steel Cat-Back Exhaust No H/B * CIVIC EX/ SI 99-00 SCS7021 Single Canister System, Stainless Steel Cat-Back Exhaust * CIVIC EX 2 DR. 01-05 SCS7024 Single Canister System, Stainless Steel Cat-Back Exhaust 2 DR. Only * CIVIC EX 4 DR. 01-05 SCS7025 Single Canister System, Stainless Steel Cat-Back Exhaust 4 DR. Only * CIVIC LX, DX, VP, 2 DR. 01-05 SCS7027 Single Canister System, Stainless Steel Cat-Back Exhaust 2 DR. Only * CIVIC LX, DX, VP, 4 DR. 01-05 SCS7028 Single Canister System, Stainless Steel Cat-Back Exhaust 4 DR. Only * CIVIC SI 02-05 SCS7029 Single Canister System, Stainless Steel Cat-Back Exhaust * CIVIC EURO R 02-05 SCS7032 Single Canister System, Stainless Steel Cat-Back Exhaust Euro Spec EP3 CTR Only * CIVIC SI COUPE 06-11 SCS7034 Single Canister System, Stainless Steel Cat-Back Exhaust Recommended for use with HHR5523; 2DR. * CIVIC SI 06-11 SCS7035 Single Canister System, Axle-Back Stainless Steel Exhaust 2DR. & 4DR. *
CIVIC EX/DX 06-10 SCS7036 Single Canister System, Stainless Steel Cat-Back Exhaust * FIT 07-08 SCS7037 Single Canister System, Stainless Steel Cat-Back Exhaust * CIVIC SI SEDAN 07-11 SCS7039 Single Canister System, Axle-Back Stainless Steel Exhaust Superceded to SCS7035
4DR. *
CIVIC SI SEDAN 07-11 SCS7040 Single Canister System, Stainless Steel Cat-Back Exhaust Recommended for use with HHR5523; 4DR. * CIVIC SI 12-Up SCS7048 Single Canister System, Stainless Steel Cat-Back Exhaust 2DR. & 4DR. *
HYUNDAI
TIBURON GT 03-06 DCS6501 Dual Canister System, Stainless Steel Cat-Back Exhaust V6 * GENESIS COUPE TURBO 09-13 DTS6601 Dual Tip Exit, Stainless Steel Cat-Back Exhaust System 4 Cyl. Coupe ** GENESIS COUPE 6 CYL. 09-13 DTS6602 Dual Tip Exit, Stainless Steel Cat-Back Exhaust System 6 Cyl. Coupe * GENESIS COUPE TURBO 09-13 SCS6601 Single Canister System, Stainless Steel Cat-Back Exhaust 4 Cyl. Coupe **
KIA
FORTE KOUP 10-13 SCS3001 Single Canister System, Stainless Steel Cat-Back Exhaust
*
MAZDA
MAZDASPEED 3 07-10 SCS8020 Single Canister System, Stainless Steel Cat-Back Exhaust Turbo *
MITSUBISHI
EVOLUTION X 08-13 DCS6011 Dual Canister System, Stainless Steel Cat-Back Exhaust ** LANCER RALLIART 09-13 DTS6012 Dual Tip Exit, Stainless Steel Cat-Back Exhaust System ** EVOLUTION VIII, IX 03-07 SCS6010 Single Canister System, Stainless Steel Cat-Back Exhaust ** EVOLUTION X 08-13 SCS6011 Single Canister System, Stainless Steel Cat-Back Exhaust ** LANCER RALLIART 09-13 SCS6012 Single Canister System, Stainless Steel Cat-Back Exhaust ** LANCER 08-11 SCS6013 Single Canister System, Axle-Back Stainless Steel Exhaust *
DC SPORTS STAINLESS STEEL EXHAUST SYSTEMS
NOTES:* Exhaust systems are compatible with SIL2500. Due to variations in certain applications some modifications may be necessary.
MAKE /MODEL YEAR PART# PRODUCT
DESCRIPTION APPLICATION NOTE
NISSAN
350Z 03-08 SCS6205 Single Canister System, Stainless Steel Cat-Back Exhaust (Dual Exit) With X Pipe * 370Z 08-12 SCS6206 Single Canister System, Stainless Steel Cat-Back Exhaust (Dual Exit) With X Pipe * CUBE 09-12 SCS7046 Single Canister System, Stainless Steel Cat-Back Exhaust * VERSA 07-12 SCS7042 Single Canister System, Stainless Steel Cat-Back Exhaust 5DR H/B *
PONTIAC
G5 07-09 SCS7033 Single Canister System, Stainless Steel Cat-Back Exhaust
SAAB
92X- AERO 05-06 SCS6301 Single Canister System, Stainless Steel Cat-Back Exhaust **
SCION
FRS 12-13 DCS7049 Dual Canister System, Stainless Steel Cat-Back Exhaust * xB 03-07 SCS6401 Single Canister System, Axle-Back Stainless Steel Exhaust
*
xA 03-07 SCS6402 Single Canister System, Axle-Back Stainless Steel Exhaust*
tC 05-10 SCS6403 Single Canister System, Axle-Back Stainless Steel Exhaust*
xD 08-13 SCS7043 Single Canister System, Stainless Steel Axle-Back Exhaust*
xB 08-13 SCS7044 Single Canister System, Stainless Steel Axle-Back Exhaust * iQ 12-13 SCS7047 Single Canister System, Stainless Steel Cat-Back ExhausttC 11-13 SCS7050 Single Canister System, Stainless Steel Axle-Back Exhaust
*
SUBARU
BRZ 12-13 DCS7049 Dual Canister System, Stainless Steel Cat-Back Exhaust * WRX/ WRX STi 02-07 SCS6301 Single Canister System, Stainless Steel Cat-Back Exhaust ** WRX WAGON 08-11 SCS6302 Single Canister System, Stainless Steel Cat-Back Exhaust 5DR.
TOYOTA
YARIS H/B 07-11 SCS7038 Single Canister System, Axle-Back Stainless Steel Exhaust 2DR. & 4DR. * YARIS SEDAN 07-11 SCS7041 Single Canister System, Axle-Back Stainless Steel Exhaust 4DR. *
VOLKSWAGEN
Golf GTI Mk V 06-09 SCS4604 Single Canister System, Stainless Steel Cat-Back Exhaust Turbo **
DC SPORTS STAINLESS STEEL EXHAUST SYSTEMS (CONT.)
MAKE /MODEL MODEL PART# PRODUCT
DESCRIPTION APPLICATION NOTE
UNIVERSAL
Universal 6" Diameter Muffler Tank 22" Length DCM2500 ROUND CANISTER MUFFLER, w/ 4" STRAIGHT TIP 2.5" Inlet Core * Universal 6" Diameter Muffler Tank 22" Length DCM3000 ROUND CANISTER MUFFLER, w/ 4" STRAIGHT TIP 3.0" Inlet Core ** Universal 6" Diameter Muffler Tank 22" Length DCM2500S ROUND CANISTER MUFFLER, w/ 4" Slant ANGLE TIP 2.5" Inlet Core * Universal 6" Diameter Muffler Tank 22" Length DCM3000S ROUND CANISTER MUFFLER w/ 4" SLANT ANGLE TIP 3.0" Inlet Core ** Universal 11” W x 7” H Diameter
Muffler Tank 26” Length DCM4000 Oval Canister Muffler w/ 4" STRAIGHT BLUE TIP 2.5" Inlet Core Universal 11” W x 7” H Diameter
Muffler Tank 26” Length DCM4500 Oval Canister Muffler w/ 4" STRAIGHT BLUE TIP 3.0" Inlet Core Universal SIL2500 4" Silencer for Muffler w/ 2.5" Inlet Core DC Muffler w/ 4" Tip Only
DC SPORTS UNIVERSAL MUFFLERS & SILENCERS
flashBack
2008, Mitsubishi
EVO Challenge,
Buttonwillow, CA
30
UPPER STRUT BARS
KEY FEATURES
DC Sports upper strut bars reduce a vehicle’s chassis flex by connecting the vehicle
body at the shock towers for added torsional stiffness. Our strut bars vastly improve
a car’s road manners and handling characteristics, work with the factory suspension
components, and are ideal for road race applications or spirited drivers with
modified street vehicles.
• Dual bar design with integrated steel brace virtually eliminates body flex for
improved handling and drivability (On certain applications, See listing)
• Mounts directly to strut tower with no modifications required
• Includes comprehensive instructions and all necessary hardware
• Titanium-Look grey powdercoat delivers lasting good looks
• Available for upper front and rear
UNDER BRACES
• Connects specific points of the undercarriage
to reinforce the chassis
• Solid one piece design for maximum rigidity
• Mild steel construction for strength
• Powder coated for a durable quality finish
• Reduces chassis flex and improves
torsion stiffness
• Improves vehicle handling and
drivability characteristics
• Monocoque design is highly rigid and
lightweight, chassis may be significantly
reinforced without adding too much weight.
32
MAKE /MODEL YEAR PART# PRODUCT
DESCRIPTION APPLICATION NOTE
ACURA
Integra RS,LS,GS-R,Type-R 94-01 CSB1304 Front Carbon Steel Strut Bar
RSX Type-S 02-06 CSB2006 Front Carbon Steel Strut Bar Single Bar
CHEVROLET
CAVALIER 2.2L 03-05 CSB2002 Front Carbon Steel Strut Bar Single Bar
COBALT 05-09 CSB2004 Front Carbon Steel Strut Bar Single Bar
DODGE
NEON SRT-4 03-05 CSB1101 Front Carbon Steel Strut Bar
CHARGER SRT-8 05-10 CSB1102 Front Carbon Steel Strut Bar 6.1 HEMI V8
300C 03-10 CSB1102 Front Carbon Steel Strut Bar Must remove Engine Cover
CHARGER 06-10 CSB1102 Front Carbon Steel Strut Bar Must remove Engine Cover
CALIBER 07-10 CSB1103 Front Carbon Steel Strut Bar 2.0/2.4L Only; No SRT4 Turbo
EAGLE
TALON 95-99 CSB1004 Front Carbon Steel Strut Bar Single Bar
HONDA
CIVIC SI 99-00 CSB1304 Front Carbon Steel Strut Bar
CIVIC DX/ LX/ EX 92-95 CSB1315 Front Carbon Steel Strut Bar
CIVIC EX 96-00 CSB1315 Front Carbon Steel Strut Bar
DEL SOL S/ SI 93-97 CSB1315 Front Carbon Steel Strut Bar
CIVIC DX/ LX/ EX 01-05 CSB1318 Front Carbon Steel Strut Bar
FIT 07-08 CSB1319 Front Carbon Steel Strut Bar Single Bar
CIVIC SI 02-05 CSB3019 Front Carbon Steel Strut Bar
S2000 00-09 CSB3020 Front Carbon Steel Strut Bar
ACCORD 03-07 CSB3022 Front Carbon Steel Strut Bar Excl. 2 Dr. 6 Speed & Hybrid ACCORD 08-12 CSB3023 Front Carbon Steel Strut Bar 4 Cyl.
HYUNDAI
TIBURON GT V6 03-08 CSB1501 Front Carbon Steel Strut Bar Single Bar
GENESIS COUPE, 4 CYL. & 6 CYL. 09-13 CSB1502 Front Carbon Steel Strut Bar Single Bar
MITSUBISHI
ECLIPSE RS/ GS 95-99 CSB1001 Front Carbon Steel Strut Bar 2.0L
ECLIPSE RS/ GS 00-03 CSB1003 Front Carbon Steel Strut Bar 2.4L
ECLIPSE GST/ GSX 95-99 CSB1004 Front Carbon Steel Strut Bar
EVOLUTION X 08-13 CSB1006 Front Carbon Steel Strut Bar Single Bar W/ Center Brace
LANCER RALLIART 08-13 CSB1006 Front Carbon Steel Strut Bar Single Bar
LANCER 08-13 CSB1006 Front Carbon Steel Strut Bar Single Bar
EVOLUTION VIII, IX 03-07 CSB6007 Front Carbon Steel Strut Bar Tri-Point
NISSAN
240SX 89-94 CSB1205 Front Carbon Steel Strut Bar
240SX 95-98 CSB1206 Front Carbon Steel Strut Bar
VERSA 07-12 CSB1207 Front Carbon Steel Strut Bar
PONTIAC
SOLSTICE 06-09 CSB2008 Front Carbon Steel Strut Bar Single Bar
G5 07-09 CSB2004 Front Carbon Steel Strut Bar Single Bar
SAAB
92X- AERO 05-06 CSB4301 Front Carbon Steel Strut Bar Single Bar
SCION
xA, xB 03-07 CSB1401 Front Carbon Steel Strut Bar
tC 05-10 CSB1403 Front Carbon Steel Strut Bar
tC 11-13 CSB1408 Front Carbon Steel Strut Bar
xB 08-13 CSB1405 Front Carbon Steel Strut Bar Single Bar
xD 08-13 CSB1406 Front Carbon Steel Strut Bar Single Bar
FRS 13-Up CSB1407 Front Carbon Steel Strut Bar Single Bar
MAKE /MODEL YEAR PART# PRODUCT
DESCRIPTION APPLICATION NOTE
ACURA
INTEGRA 94-01 CSB2310 Rear Carbon Steel Strut Bar
DODGE
NEON SRT-4 03-05 CSB2101 Rear Carbon Steel Strut Bar
HONDA
CIVIC 88-91 CSB2310 Rear Carbon Steel Strut Bar
CIVIC 2DR. & 4 DR. 92-95 CSB2310 Rear Carbon Steel Strut Bar
CIVIC 2DR. & 4 DR. 96-00 CSB2310 Rear Carbon Steel Strut Bar
CRX 88-91 CSB2310 Rear Carbon Steel Strut Bar
DEL SOL 93-97 CSB2310 Rear Carbon Steel Strut Bar
HYUNDAI
Tiburon GT 03-08 CSB2501 Rear Carbon Steel Strut Bar V6
MITSUBISHI
ECLIPSE 00-04 CSB2007 Rear Carbon Steel Strut Bar
ECLIPSE GST/ GSX 95-99 CSB2007 Rear Carbon Steel Strut Bar
ECLIPSE RS/ GS 95-99 CSB2007 Rear Carbon Steel Strut Bar 2.0L
EVOLUTION VIII, IX 03-07 CSB6008 Rear Carbon Steel Strut Bar
NISSAN
240SX 89-94 CSB2105 Rear Carbon Steel Strut Bar 4 Cyl.
SAAB
92X-Aero 05-06 CSB4401 Rear Carbon Steel Strut Bar
SUBARU
WRX 02-07 CSB4401 Rear Carbon Steel Strut Bar
WRX STi 02-07 CSB4401 Rear Carbon Steel Strut Bar
TOYOTA
DC SPORTS CARBON STEEL ‘’REAR” STRUT TOWER BARS
MAKE /MODEL YEAR PART# PRODUCT
DESCRIPTION APPLICATION NOTE
SUBARU
BRZ 13-Up CSB1407 Front Carbon Steel Strut Bar Single Bar
WRX 02-07 CSB4301 Front Carbon Steel Strut Bar Single Bar
WRX STi 02-07 CSB4301 Front Carbon Steel Strut Bar Single Bar
WRX WAGON 08-13 CSB4302 Front Carbon Steel Strut Bar 5DR.
WRX SEDAN 08-13 CSB4302 Front Carbon Steel Strut Bar 4DR.
WRX STi 08-13 CSB4302 Front Carbon Steel Strut Bar 5DR.
TOYOTA
COROLLA CE,S,LE 03-07 CSB1402 Front Carbon Steel Strut Bar
MATRIX XR 02-05 CSB1402 Front Carbon Steel Strut Bar
MATRIX XRS 02-05 CSB1402 Front Carbon Steel Strut Bar
YARIS 07-11 CSB1404 Front Carbon Steel Strut Bar
VW
GOLF/ JETTA 1.8T 01-04 CSB1601 Front Carbon Steel Strut Bar 1.8T
GOLF/ JETTA 2.0 99.5-05 CSB1603 Front Carbon Steel Strut Bar 2.0L
MAKE /MODEL YEAR PART# PRODUCT
DESCRIPTION APPLICATION NOTE
SCION
FRS 13-Up CUB1407A Rear Lateral Sub Frame Brace Two-Point, 1pc.
FRS 13-Up CUB1407B Rear Sub Frame Braces Two-Point, 2pcs.
SUBARU
BRZ 13-Up CUB1407A Rear Lateral Sub Frame Brace Two-Point, 1pc.
BRZ 13-Up CUB1407B Rear Sub Frame Braces Two-Point, 2pcs.
MAKE /MODEL YEAR PART# PRODUCT
DESCRIPTION APPLICATION NOTE
HONDA
RHWA-002 30" O2 Sensor Extension, 4- Wire
RHWA-003 10.5" O2 Sensor Extension, 4- Wire
RHWA-004 58" O2 Sensor Extension, 4- Wire RHWA-005 7.5" O2 Sensor Extension, 4- Wire
NISSAN
240SX 91-94 RHWA-006 O2 Sensor Extension, 1 Wire K24DE
SENTRA SE-R/ SPEC. V 02-05 RHWA-007 O2 Sensor Extension, 4 Wire 2.5L
18212-SB2-961A Crush-Ring Gasket 2 PC. Header
DC SPORTS CHASSIS UNDER BRACES
DC SPORTS MISCELLANEOUS PARTS
flashBack
flashBack
13000 Temple Ave. City of Industry, CA 91746 Customer Service line 800. 237. 7560 Tech Support line 626. 968. 5147 Fax. 626. 937. 6993
www.dcsports.com
For up to date fitment application please contact us at (626) 968-5147 or [email protected]
DC Sports (Pilot Automotive Group) reserve the right to change prices, applications and discontinue without advance notice. DC Sports (Pilot Automotive Group) are not responsible for any typographical errors.
This catalog supersedes all previous catalogs. Possession of this catalog and or price sheet does not constitute ability to purchase items directly from us. Some items are for race or off road use only. Not to be used on public roads.
Some items are C.A.R.B approved (50 state street legal) for use while others are legal only for states that do not follow CA emission standards (most states).
Some parts are not legal in the state of CA or other states adopting the same emissions standards. To know the status of a part number on your vehicle is legal or not please contact us at (626) 968-5147 or [email protected] DC Sports is a registered trademark of the Pilot automotive Group. No use may be made of the text, photographs, or any other elements contained within this catalog without prior written consent from DC sports. All rights reserved.
