CONVEYING TECHNOLOGY
LOADING TECHNOLOGY
PALLETIZING TECHNOLOGY
PACKAGING TECHNOLOGY
SORTATION AND
DISTRIBUTION SYSTEMS
8 7 9 10 11 12 2
BEUMER paketpac
®– flat film method
Palletless packaging according to the BEUMER flat film method
Standard capacity of straight through transport 60 packages/h
Standard capacity of reversible transport 15 packages/h
6 5 3 2 1 4 !
! bag feeding section "
" bag flattener with timing facility §
§ BEUMER paletpac®
$
$ belt roller conveyor %
% belt roller conveyor &
& flat film sheet applicator /
/ combined film hood applicator and shrink machine
(
( chain conveyor with integrated base shrink system
)
) stack turning station with profile device
=
= flat film sheet applicator Q
Q shrink machine W
4
Flat film method
Application of the bottom reinforcing film and pulling over the film hood.
Turning the stack and profiling the package base. Forming the base shrink followed
by the side and top shrink.
1
2
3
This method is especially distinguished by the following:
• Reduced film consumption by
using flat film.
• High packing rigidity resulting
from base shrink which gives optimal strength in the bottom flat film.
• Improved protection against
weather influence resulting from a seamless top cover.
• Shrink technology using evenly
applied heated air which elimi-nates thin areas and folds in the shrink film, which normally create weakness, and thus utilising the full potential of shrink film tension.
• Reduced space requirements
resulting from the ability to locate multiple operations at the same position.
Shrinking the top cover flat film. Application of top cover flat film.
8 7 9 10 11 12 6
BEUMER paketpac
®– counter hood method
Palletless packaging according to the BEUMER counter hood method
Standard capacity of straight through transport 60 packages/h
6 5 3 2 1 4 !
! bag feeding section "
" bag flattener with timing facility §
§ BEUMER paletpac®
$
$ belt roller conveyor %
% belt roller conveyor &
& flat film sheet applicator /
/ combined film hood applicator and shrink machine
(
( chain conveyor with integrated base shrink system
)
) stack turning station with profile device
=
= combined film hood applicator and shrink machine
Q
Q chain conveyor with integrated base shrink system with profile device
W
8
Counter hood method
Application of base reinforcing flat sheet and pulling the shrink hood
Mechanically forming the soon to be package base and rotating the stack
Preparing the undershrink followed by the side and top shrink process
1
2
3
This method is especially distinguished by the following:
• Advanced heat shrink
techno-logy utilizing evenly heated air in order to eliminate film thinning and wrinkles; therefore, achiev-ing maximum film tension.
• The palletless process utilizes a
flat film sheet to reinforce the package base, a shrink hood and a final counter hood
• High package rigidity due to the
“Undershrink” method which provides optimum strength in combination with the counter hood
• Reduced space requirements
due to the handling of multiple tasks by individual system components
Shrinking of counter hood and forming the package base Application of counter hood
10
TECHNICAL INFORMATION
BEUMER Flat film method
OP 6129 2675 3712 4320 4410 1760 OP 1760 4320 4410 3582 4615 2775 6771
Flat film method / Reversible transport Standard capacity 15 packages/h
TECHNICAL INFORMATION
BEUMER Counter hood method
OP
6129 2675 3712 4320 4410
1760
OP
1760
PROGRAM OF SUPPLY
CONVEYING TECHNOLOGY
•
Conventional and closed belt conveyor systems•
Overland conveyors also in curved design•
High capacity belt and chain bucket elevators•
Apron conveyor systems with chains or steel cable reinforced belts as traction element•
Bag handling systems for packing plants•
Screw conveyors in various designsLOADING TECHNOLOGY
•
Plants for loading of bulk or bagged material onto trucks, into railroad vehicles and ships•
Semiautomatic railcar unloading machines•
Automatic bag loading systems for trucks and containersPALLETIZING TECHNOLOGY
•
Palletizing robots•
Automatic high capacity palletizers•
Automatic depalletizers•
Pallet conveying systemsPACKAGING TECHNOLOGY
•
Stretch wrapping•
Shrink wrapping•
Stretch hood wrapping•
Palletless shrink wrappingSORTATION AND DISTRIBUTION SYSTEMS
•
Computer-controlled handling, sorting and distributing systems for piece goods•
Routing controlled conveying of pallets and collected loadsThe information contained in this brochure merely serves as a non-binding description of our products and is without guarantee.
Binding information, in particular relating to capacity data and suitability for specific applications, can only be provided within the framework of concrete inquiries.
BEUMER Maschinenfabrik GmbH & Co. KG Postfach 12 54 D - 59267 Beckum /Germany Tel. +49 - (0) 25 21 - 24 0 Fax +49 - (0) 25 21 - 24 280
E-Mail: [email protected]
Internet: www.BEUMER.com
BEUMER Corporation
Branchburg, NJ 08876/ USA Tel.: +1 (732) 560-8222 Fax: +1 (732) 563-0905
Australian Representative Office of BEUMER • North Ryde / Australia
Ph. +61(0) 2-9889-5561 Fax +61(0) 2-9889-5562
Asia Representative Office of BEUMER • Bangkok/Thailand Ph. +66 (0) 2731-7190 Fax +66 (0) 2731-7194 BEUMER Ltda. Campinas - SP/Brazil Tel.: +55 (0) 19-3243-1700 Fax +55 (0) 19-3242-1411 BEUMER S.a.r.l. St. Ouen L’Aumone/France Tel.: +33 (0) 1-3464-2520 Fax +33 (0) 1-3037-6883
BEUMER Technology India Private Limited • Mumbai / India
Tel.: +91 (0) 22-2577-2874 Fax +91 (0) 22-2577-2876 +86 (0) 21-6921-3788 +86 (0) 21-6921-3628 E406 0306