For Users of Microsoft
with a Windows®
Fuji Xerox Information Systems Co.,Ltd.
For Users of Microsoft
®
Internet Explorer1
Windows® 7
Fuji Xerox Information Systems Co.,Ltd.
改訂履歴
Revision Date of
revision Description of revision
pg. 1-2
< Preface >
Thank you for using the FRAP
The mechanism of certificate management used for
Windows® 7 has been changed from that of earlier Windows®
consequently, you might encounter problems when you acquire
or renew certificates with Windows® 7.
This document provides information on the operations that are
necessary to acquire or renew certificates in a Windows®
< TOC >
< TOC > ... 1-3
1 < Preparation Before Acquiring or Renewing Certificates > ... 1-4 1.1 < Certificate Site Name is registered in “Trusted sites” > ... 1-5
< Registration procedure > ... 1-5
1.2 < Confirm the “security level” for the “Trusted sites zone” > ... 1-8
< setting procedure > ... 1-8
1.3 < Confirm the ”Manage Add-ons” > ... 1-12 < setting procedure > ... 1-12 1.4 < Install the root certificates > ... 1-15
< Installing procedure > ... 1-15
1
< Preparation Before Acquiring or
Renewing Certificates >
1.1
< Certificate Site Name is registered in
“Trusted sites” >
< Registration procedure >
Set up the security level register FRAP Certificate Issuing Service Site to the “Trusted sites” in Internet Explorer. Please proceed with the procedures below.
（1） Open Internet Explorer. And select [Tools] > [Internet Options]- Figure 1-1(1),(2)
<Figure 1-1> Internet Explorer pulldown menu
（2） Select the [Security] tab from the displayed “Internet Options” dialog-Figure 1-2(3)
（3） Select [Trusted sites] from the [Select a zone to view or change security settings] – (4), and click the [Sites] button – (5)
(2)
pg. 1-6
<Figure 1-2> Internet Option dialog
（4） Enter an https address as shown below to the [Add the zone] in the ”Trusted sites” dialog, and click the [Add] button – figure 1- 3(6),(7).
Enter https address: https:// frap-isssys.fujixerox.co.jp
(3)
(4)
（5） Upon confirming that the above URL is displayed under the [Websites], close
Please proceed to “2.Confirm the zone””.
(6)
(8)
<Figure 1-3> Trusted sites dialog
Upon confirming that the above URL is displayed under the [Websites], close the “Trusted sites” dialog – Figure 1-4(8),(9)
<Figure 1-4> Trusted sites dialog
Please proceed to “2.Confirm the “security level” for the If the “Trusted sites Upon confirming that the above URL is displayed under the
4(8),(9)
“security level” for the If the “Trusted sites
(7)
pg. 1-8
1.2
< Confirm the “security level” for
the “Trusted sites zone” >
< setting procedure >
If .this page appears, ActiveX® may be disabled through your security settings.
Please try again after enabling ActiveX by following the procedure below. （1） Select [Trusted sites] from the [Select a zone to view or change
security settings] – Figure 2-1(1), and click the [Custom level] button – (2).
<Figure 2-1> Internet Option dialog
(1)
（2） Search the “Run ActiveX controls and plug-ins” under “ActiveX controls and plug-ins” in the open Security Setting dialog, and then select “Enable” item – Figure 2-2(3)
<Figure 2-2> Security Settings dialog
（3） Search the “Script ActiveX controls marked safe for scripting”, and then select “Enable” item – Figure 2-3(4).
pg. 1-10
（4） Click the [OK] button to close the Security Settings dialog –(5)
<Figure 2-3> Security Settings dialog
（5） Click the [OK] button to close the Internet Options dialog – Figure2- 4(6).
(4)
<Figure 2-4> Internet Option dialog Please proceed to “3. Confirm the “Manage Add-ons”.
pg. 1-12
1.3
< Confirm the ”Manage Add-ons” >
< setting procedure >
To establish the running Add on for Internet Explorer, please confirm and set up the Add on.
（1） Open Internet Explorer, and select [Tools] > [Manage Add-ons] – Figure 3-1(1),(2).
<Figure 3-1> Internet Option dialog
（2） Check whether the add-on “X509 Enrollment Web Class Factory” is displayed, and confirm the Status in the “Manage Add-ons” dialog – Figure 3-2 (3), (4)
(2)
<Figure 3-2> Manage Add-ons dialog
（3） If the add-on "X509 Enrollment Web Class Factory" is displayed and the status is "Disabled", please proceed to operation 4).
If the add-on "X509 Enrollment Web Class Factory" is not displayed or the status is "Enabled", please proceed to operation 5).
（4） 4) Click and select the add-on named "X509 Enrollment Web Class Factory".
And click the "Enable" button - Figure 3-3 (5), (6).
(3)
(4)
(5)
pg. 1-14
（5） Click "Close" button and close the "Manage Add-ons" dialog - Figure 3-4 (7).
<Figure 3-4> Manage Add-ons dialog Please proceed to “1.4 Install the root certificates”.
1.4
< Install the root certificates
< Installing procedure
If the "Certificate Error: Navigation Blocked" is displayed when you access the <Certificate acquisition web page> printed in the “Request to acquire certificate” email, you need to install the root certificate.
<Figure 4
Install the root certificates >
ing procedure >
If the "Certificate Error: Navigation Blocked" is displayed when you access <Certificate acquisition web page> printed in the “Request to acquire
email, you need to install the root certificate. - Figure 4
<Figure 4-1> Certificate Error: Navigation Blocked
If the "Certificate Error: Navigation Blocked" is displayed when you access <Certificate acquisition web page> printed in the “Request to acquire
Please proceed with the procedures
（1） Please access to URL below. URL：
http://www.download.windowsupdate.com/msdownload/update/v3/static/t rustedr/en/rootsupd.exe
（2） If the “File Download” dialog is displayed, Click to [Run] button the dialog - Figure 4
<Figure 4
（3） If the “User Account Control” dialog is displayed. Click to [Yes] button the dialog.
displayed.)
<Figure 4
Please proceed with the procedures below for install to root certificates.
Please access to URL below.
http://www.download.windowsupdate.com/msdownload/update/v3/static/t rustedr/en/rootsupd.exe
If the “File Download” dialog is displayed, Click to [Run] button the Figure 4-2 (1).
<Figure 4-2> File Download dialog
If the “User Account Control” dialog is displayed. Click to [Yes] dialog. - Figure 4-3 (2). (This dialog might not be
<Figure 4-3> User Account Control dialog
(1)
pg. 1-16
below for install to root certificates.
http://www.download.windowsupdate.com/msdownload/update/v3/static/t
If the “File Download” dialog is displayed, Click to [Run] button the
If the “User Account Control” dialog is displayed. Click to [Yes] 3 (2). (This dialog might not be
Close all the Internet Explorer windows, and try the acquisition procedure of certificate again.
Error Message
If you attempt to aquire certificates using Windows® 7 without first performing the preparation procedures, an error message may appear as shown in Figure 5. If this appears, certificates can not be acquired, even if you attempt to re-do the procedures. In such case, please ask an
administrator to re-issue the certificate.
1.5
< Appendix >
< Confirm the TLS-option setting >
Confirm the TLS-option setting by the following procedure.
（1） Open Internet Explorer 11, and select [Tools] > [Internet Options].
（2） Select the [Advanced] tab from the displayed [Internet Options] dialog box . - Figure 6
（3） To enable TLS in Internet Explorer, check the "Use TLS X.X" box on the [Advanced] tab.
If the "Use TLS X.X" box is checked , there is no need to operation on this section.
<Figure 6> Internet Option dialog This is end of setting about confirm the TLS-option setting.
③
①
For Users of Microsoft® Internet Explorer11 with a Windows® 7
22, Octber, 2015 ：1st version issued
※No part of this document may be reproduced or transmitted in any means, electric, mechanical, photocopying, without the prior written permission from the publisher.
■Trademarks
Microsoft, Windows, Internet Explorer, ActiveX are Microsoft Corporation’s trademark in the United States and/or other countries.
Microsoft product screen shots reprinted with permission from Microsoft Corporation. All brand names and product names are trademarks or registered trademarks of their
