Configuration Example
Full text
Related documents
This configuration example demonstrates one method you can use to configure dynamic routing over a private link between two sites, and how to configure the Firebox devices at each
For example, in the Colo configuration, the Corp-to-RMT tunnel route uses the network IP address of the trusted network at Corp as local, even though it is not physically located at
The example configuration file contains a static NAT action, also known as an SNAT action, to forward traffic from the public IP address of the Firebox external interface to the
set interfaces ge-2/1/10 unit 29 description toCE3 set interfaces lo0 unit 7 family inet address 1.1.1.4/32 set protocols mpls interface all. set protocols ldp
Configuring SRX Series Branch Devices to Send Traffic Log Messages Through the Data Plane The SRX Series branch device traffic log messages can be sent through the data plane
These example configuration files do not include specific policies to handle outbound traffic from public servers on this network, because the default Outgoing policy already
“Distributed Enterprise Connectivity Architecture Design Considerations” on page 1 provides information about link-level as well as device-level high availability deployment for each
ii For NAT Configuration 2 (in the example shown), press Escape to return to the Network Address Translation menu. iii For NAT Configuration 1 or NAT Configuration 3 (in the