• No results found

Configuring QoS and Per Port Per VLAN QoS

N/A
N/A
Protected

Academic year: 2021

Share "Configuring QoS and Per Port Per VLAN QoS"

Copied!
52
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Figure 27-1 QoS Classification Layers in Frames and Packets
Table 27-1 IP Precedence and DSCP Values
Figure 27-2 shows the basic QoS model. Actions at the ingress and egress interfaces include classifying  traffic, policing, and marking:
Figure 27-3 Classification Flowchart
+7

References

Related documents

Healthy Homes have provided presentations to Private Sector Housing, Environmental Health, M.F.R.S (Merseyside Fire & Rescue Service), Energy Projects Plus, Reachout , Wirral

The CoS priority of a packet is mapped to a traffic class.Supermicro switchesprovide support to configure the mapping of CoS priority to a traffic class.Each traffic class is mapped

If any of your creditors have started a lawsuit for a debt you owe, started the foreclosure process on your home, or are threatening you with repossession then we will ensure

many years, in spite of several herpetological surveys (Mateo 1991; García-Roa et al. In this work, we also studied some aspects of morphology and ecology of this skink.

Urbanization facilitates synanthropic species such as rodents, which benefit the diets of many preda- tors in cities. We investigated how urbanization affects the feeding ecology

By using the mls qos trust cos interface configuration command, you can configure the switch port to which the telephone is connected to trust the CoS labels of all traffic received

Verify auto QoS at the distribution layer on DLS1 and DLS2 using the show auto qos interface command. DLS1# show auto qos

• When you enable auto-QoS by using the auto qos voip cisco-phone, the auto qos voip cisco-softphone, or the auto qos voip trust interface configuration command, the