• No results found

Drobo How-To Guide. Set Up and Configure a Drobo iscsi SAN as Shared Storage for Citrix XenServer. Topics. Initial Configuration STEP 1

N/A
N/A
Protected

Academic year: 2021

Share "Drobo How-To Guide. Set Up and Configure a Drobo iscsi SAN as Shared Storage for Citrix XenServer. Topics. Initial Configuration STEP 1"

Copied!
10
0
0

Loading.... (view fulltext now)

Full text

Loading

References

Related documents

Data Robotics, Drobo, DroboEllite, DroboPro, BeyondRAID, and Smart Volumes are trademarks of Drobo, Inc., which may be registered in some jurisdictions.. All other trademarks used

The following example will demonstrate how to configure SmartSync Pro to replicate data from a Source Drobo 5N to a Destination Drobo 5N. The procedures will be the same for any

While the Drobo typically handles all aspects of the iSCSI provisioning process, to configure MPIO some manual configuration of the iSCSI initiator is required. Make a note of

Data Robotics, Drobo, DroboEllite, DroboPro, BeyondRAID, and Smart Volumes are trademarks of Drobo, Inc., which may be registered in some jurisdictions.. All other trademarks used

This guide describes how to implement a fast and reliable backup and disaster recovery solution using StorageCraft ShadowProtect and Drobo file sharing (FS or B800fs) storage...

Drobo PC Backup cannot only back up your internal hard disk drive, but also external hard disk drives, such as a direct-attached Drobo to another Drobo. If you are using a Drobo

Use Drobo as Tiered Storage for Cloud Computing with VMware vCloud Director Adding Datastores to a Provider vDC.

This document describes how easy it is to use a Drobo iSCSI SAN as backend storage for an organization's file servers: provisioning shares onto which Access Control List can be