R
R
E
E
L
L
A
A
Z
Z
I
I
O
O
N
N
E
E
T
T
E
E
C
C
N
N
I
I
C
C
A
A
RURAL
R
R
E
E
L
L
A
A
Z
Z
I
I
O
O
N
N
E
E
T
T
E
E
C
C
N
N
I
I
C
C
A
A
RURAL ELECTRIFICATION:
HOUSES – VILLAGES – DEVELOPING COUNTRIES
Electric energy is one of the main means for the development of a rural area. Thanks to electric energy it is possible to make easier an endless series of actions, useful for the basic needs:
Lighting;
Water pumping, transfer and conditioning for human, agricultural (irrigation) and zootechnic uses;
Supply of household appliances and various devices able to improve the quality of life;
Supply of telecommunication systems, industrial plants, schools, hospitals, public offices ext..
The use of stand alone systems working through renewable energy (photovoltaic, wind, hydroelectric, biomass) makes the supplying of electric energy in decentralized areas much easier, without using expensive cables or airlines which, anyway, will be never foreseen. THE PROGRAMME OF ENERECO srl
“KM-FSERIES”-STANDALONEKITSFORTHE ELECTRIFICATIONOFALPINEREFUGES
ENERECO srl has developed a series of KITS for alpine refuges, complete with appliances at 12, 24Vdc low voltage (refrigerator, lamps, pumps ext.), which can be easily installed. Because of the naturalistic importance of such sites, through these kits ENERECO srl wanted to avoid the use of gensets granting no pollution and the max respect of the mountain territory.
“KM-ISERIES”-STANDALONEKITSFORTHE ELECTRIFICATIONINDEVELOPINGCOUNTRIES
Thanks to the deep knowledge of the problems in developing countries, ENERECO srl has developed a series of kits complete with special appliances such as A double class refrigerators, very low consumption lamps, high performance pumps, particular household appliances, innovative conditioning plants ext..
These kits are dimensioned using the photovoltaic and wind technology, with the possibility of inserting further back-up generation systems (endothermic generators, fuel-cell, CATs).
“KM-CUSTOMSERIES”-STANDALONEKITSFORTHE ELECTRIFICATIONOFRURALAREAS,VILLAGES,SMALL COMMUNITIES
ENERECO srl is able to dimension, supply and install stand alone rural electrification systems all over the world.
Such systems work through photovoltaic, wind, hydroelectric energy, reaching a power till 1MW, for civil uses (villages, small rural communities), industrial uses (industrial activities in rural areas not connected to the public electric grid), health uses (hospitals and medical dispensaries in developing countries) military uses (electric supply of garrisons, barracks, radio networks).
R
R
E
E
L
L
A
A
Z
Z
I
I
O
O
N
N
E
E
T
T
E
E
C
C
N
N
I
I
C
C
A
A
LWP1 – PHOTOVOLTAIC LANTERN
The LPW1 has been designed to meet your need for a reliable and affordable portable light and for charging mobile phones.
GENERAL SPECIFICATIONS
There are 4 brightness levels available. The duration of each, after one day charging is as follows:
Level Duration
1 100 hours
2 24 hours
3 12 hours
4 6 hours
Attention: the light source is high brightness LED. Do not look at the source directly. The indicator will turn red when there is 1 hour of light remain.
The indicator will flash with red light for 30 seconds in case the battery is low.
CHARGING OF THE BATTERY
To charge the battery of the lantern with the solar light , put the SOLAR MODULE under sunlight and ensure that the solar module is directly exposed to the sun .
If the module is partially shaded, it will affect and strongly reduce the power output. If you use the Energy Station in the Southern Hemisphere , the module must face the NORTH. If you use the Energy Station in the Northern Hemisphere , the module must face the SOUTH. Install the module by fixing it properly.
The led signal turns red when being charged; it turns green when fully charged. It is normal that the charger gets hot when being charged. The item will be fully charged by solar panel after 10 hours (sunlight peak).
R
R
E
E
L
L
A
A
Z
Z
I
I
O
O
N
N
E
E
T
T
E
E
C
C
N
N
I
I
C
C
A
A
MAINTENANCE
Make sure that the product is not exposed to liquids; Clean dust or dirt on the solar module with wet cloth
Charge it at least once a month to prolong the battery lifespan
The battery must be replaced after a certain number of years of use. This must be done by authorized technicians.
SYSTEM SPECIFICATIONS
Photovoltaic Module 1,7 W - 6 V
Led Light 1 x 1 W
USB plug To charge mobile phone or other applications Rechargeable battery Li-ion 2600 mAh 3,7 V
RECYCLING
Do not throw any of the components after discarding. To minimize pollution, please recycle them. All of the components used for manufacturing the system are recyclable.
R
R
E
E
L
L
A
A
Z
Z
I
I
O
O
N
N
E
E
T
T
E
E
C
C
N
N
I
I
C
C
A
A
ESOL1 – PHOTOVOLTAIC ENERGY STATION
The ESOL1 Energy Station has been designed to meet your need for a reliable and affordable portable light and for charging mobile phones.
1
: Solar module with cable and DC plug2
: Energy station with battery inside and DC plugs3
: Battery charging indicators and general on off switch4
: Mobile phones plugs for energy station USB port5
: Light cable, switch and DC plug6
: Light bulbs with high brightness leds.GENERAL SPECIFICATIONS
The Solar Module must be installed outdoor, connect it to the Energy Station with the help of cable provided.
Light Bulb can be placed in different rooms with the help of the standard 3 meters cable included to every Bulb.
R
R
E
E
L
L
A
A
Z
Z
I
I
O
O
N
N
E
E
T
T
E
E
C
C
N
N
I
I
C
C
A
A
Through the USB plug it is possible to charge different types of Mobile Phones or MP3 Players or other equipment. Standard Plugs included:
・ Nokia 6101, 5210 and 8600 ・ AnycallG600 and D800 ・ Motorola V3 ・ LG KG90 ・ Sony Ericsson K750 ・ Iphone ・ Blackberry ・ USB. SYSTEM SPECIFICATIONS Photovoltaic Module 5 Wp Led Lights 3 x 1.2 W
USB plug To charge mobile phone or other applications Rechargeable battery Li-ion 4400mA – 7.4V
The battery duration depends on the number of Light Bulbs switched on. For example, after one day of charging:
NUMBER OF LIGHT
NUMBER OF LIGHT BULBS ON DURATION
1 12 hours
2 6 hours
3 4 hours
R
R
E
E
L
L
A
A
Z
Z
I
I
O
O
N
N
E
E
T
T
E
E
C
C
N
N
I
I
C
C
A
A
PHOTOVOLTAIC AND HYBRID KITS FOR THE ELECTRIFICATION OF RURAL AREAS
(mountain refugees, homes in developing countries, ext.)
In an isolated site, not connected to the public electrical grid, the use of a generating set is not always the best solution.
In fact it causes pollution, noise, it can have mechanical problems, you should take care of the removal of filters and oils, the supplying of fossil fuel and spare parts for the maintenance ext. These problems do not exist using a photovoltaic or hybrid system.
Moreover, the generating set is a bit cheaper but the functioning and maintenance costs are expensive. On the other hand you can amortize the cost of a photovoltaic or hybrid system within 6-8 years and the system has a life time of 25-30 years considering only a batteries’ exchange every 6-8 years.
“KM”SERIESKITS DEVELOPED BY ENERECO SRL
ENERECO srl has developed a series of standard KITS for the electrification of isolated areas (mountain refugees, homes in developing countries ext.).
KM kits are easy to be installed and they are complete with the various electrical devices such as lamps, refrigerators, freezers, pumps ext. They are divided into 2 types: “KM-F” Series, using only photovoltaic modules, and “KM-I” Series, using the hybrid technology (photovoltaic + wind).
In the KM kits the pv arrays, the batteries and the electrical load have been calculated for the following periods: OCCASIONAL USE (3 days per week) in periods with solar radiation of less than 4,5kWh/m²/day
CONTINUOUS USE, in periods with solar radiation of more than 4,5kWh/m²/day “KM-F” KITS RANGE
Characteristics KM-F 1 KM-F 2 KM-F 3 KM-F 4 KM-F 5 KM-F 6 KM-F 7 Photovoltaic power 18Wp 30W p 50Wp 110Wp 330Wp 350Wp 525Wp Supporting structure no no Head pole Head pole Oz/Vz Oz/Vz Oz/Vz
Junction box no no no no JB3/24 JB2/24 JB4/24
Charge regulator SLS6.6 SLS6.6 SLS8.8 SLS8.8 SOL J12 SOL S20 SOL T30 Batteries 12V/15Ah 12V/42Ah 12V/65Ah 12V/100Ah 24V/100Ah 24V/230Ah 24V/600Ah
Lamps (*) 2x5W 3x7W 3x11W 5x11W 5x11W 8x11W 10x11
24Vdc refrigerator no no no no 50 lit 150 lit 150 lit
24Vdc freezer no no no no no no 150 lit
Inverter – 230Vac 50Hz no no no 290VA 470VA 1kVa 2,3kVA+CB(°) Pump or autoclave - 24Vdc no no no ACB61 ACB61 ACB61 ACB61 Other no DC/DC (§) DC/DC (§) no Radio TV 14” TV 14”
We can develop further “KM-F” kits according to the customer’s demand.
(*) In the 12Vdc systems th e lamps will be fluorescent, complete with 12Vdc electronic ballast. In the 24Vdc syste ms the lamps will be type DULUX EL and they will be supplied at 230Vac by the inverter inserted in the kit.
(§) DC/DC converter allows to use a radio device.
(°) The inverter has a bidirectional function and it can be also a battery charger if connected to a diesel generating set.
The electrical material for the installation is not included in the KIT but it can be supplied on request.
R
R
E
E
L
L
A
A
Z
Z
I
I
O
O
N
N
E
E
T
T
E
E
C
C
N
N
I
I
C
C
A
A
“KM-I” KITS RANGE
Characteristics KM-I10 KM-I 20 KM-I 40 KM-I 40
Photovoltaic 480Wp 525Wp 700Wp 1200Wp
Supporting structure Oz/Vz Oz/Vz Oz/Vz Oz/Vz
Junction box JB3/24 JB3/24 JB2/48 JB4/48
Wind generator (1) 400Wp 900Wp 1000Wp 3000Wp
Charge regulator SOL S20 SOL S20 TAR30 PWT4055
Batteries 24V/300Ah 24V/600Ah 48V/800Ah 48V/1200Ah
Lamps 230Vac 10x15W 10x15W 10x15 10x15
Combined refrigerator 230Vac (2) 250lit + 86lit 250lit + 86lit 250lit + 86lit 250lit + 86lit
Freezer 230Vac no 193lit 261lit 378lit
Inverter – 230Vac 50Hz 2.3kVa+CB 4kVa+CB 5kVA+CB 8kVA+CB
Pump or autoclave 0.5kW 1kW 1kW 2kW
TV TV 28” TV 28” TV 28” TV 28”
Other household appliances no no Dishwasher 1,5kW Dishwasher 2.5kW Kitchen robot 0.3kW We can develop further “KM-I” kits according to the customer’s demand.
(1) The wind generator is supplied complete with control system; pole and mechanical fixing system are not included.
(2) It is a refrigerator complete with freezer. The first value defines the capacity in litres of the refrigerator, the second one defines the capacity in litres of the freezer.
The hybrid kits complete with wind system can be mostly used in sites with average wind characteristic of more than 5 m/sec, where the wind part can produce the energy demanded to be combined to the photovoltaic array. For sites with a smaller wind characteristic we will have to do a proper dimensioning.
EXAMPLE OF HYBRID PHOTOVOLTAIC KIT
This scheme is only an example.
INVERTER PHOTOVOLTAIC ARRAY WIND GEN. JBOX REGULATOR 12/24VDC USES 230VAC/50HZ USES BATTERY
R
R
E
E
L
L
A
A
Z
Z
I
I
O
O
N
N
E
E
T
T
E
E
C
C
N
N
I
I
C
C
A
A
PV-
TRAILER
:
SOLAR
SYSTEM
"STAND
ALONE"
WITH
TRAIL
INGENERAL
The system PV- TRAILER has been developed by ENERECO ENERGY SOLUTIONS Ltd to meet all the requirements that you need to a photovoltaic power utilities easily transported and installed on site, or traveling ( tents , mobile medical centers , housing units prefabricated , etc . ) .
SPECIFICATIONS
The system PV- TRAILER has been developed in various sizes to satisfy a large number of rural power requirements .
The main features of the system are :
• Trail type to fast hitch with 2 wheels complete with cushions.
• Attack Basket of civil ( towing fast) or military ( slow towing ) .
• Body made of hot-dip galvanized steel .
• Support for photovoltaic modules hinged on the structure of the shopping cart.
• 4 legs with manual opening for the stabilization of the system when stationed .
• 2 output power : 24Vdc ( direct from battery ) and 230Vac 50Hz ( 110Vac and 400Vac 60Hz 50Hz 3F on request)
• PV modules , system management and control, batteries and inverter integrated
• 3 types available (plus several others on request) .
PV-TRAILERTYPE
CARACTERISTICS PV-TRAILER350 PV-TRAILER700 PV-TRAILER1100/WIND
PV Array power 350Wp 700Wp 700Wp
Wind Generator(¹) -- -- 400W
Wind Gen. Type -- -- Asse orizzontale Battery Capacity 3kW 7.2kW 7.2kW
Battery Voltage 24V 24V 24V
Inverter bidirect. (²) 230Vac 50HZ – 2.2kW 230Vac 50HZ – 2.0kW 230Vac 50HZ – 4.4kW
(¹) The wind generator is supplied with a bracket for anchoring to the ground, telescopic pole and mounting accessories. (²) The drive in question may, in the case of batteries, get charger. Then via a generating set of adequate power can be integrated battery charging in conditions of prolonged absence of sun or wind. Everything is automated by the same inverter. The electrical loads are powered directly from the generator when the generator turned on.
R
R
E
E
L
L
A
A
Z
Z
I
I
O
O
N
N
E
E
T
T
E
E
C
C
N
N
I
I
C
C
A
A
PV-W-CONT
:
PHOTOVOLTAIC
SYSTEM
"STAND
ALONE"
ON
CONTAINER
IN GENERAL
To supply isolated communities or installations or military telecommunications , ENERECO studied a series of photovoltaic systems and photovoltaic HYBRID easily transportable container on site .
The system in question is designed “ad hoch” in according to the energy consumption of the client and wired inside the transportable container .
Once in place , just download and place the container and open the structure located on the roof of the container , which contains the PV modules already fixed and electrically connected .
The batteries and the apparatus of the system of energy production are already wired and positioned inside the container . Just then connect the cable to the output jack of the users of the system and all will be able to operate in a few minutes .
SPECIFICATIONS
The main features of the system are :
• Containers normal type or passive cooling system .
• Ability to use various sizes of containers depending on the power of the PV system and the capacity of the batteries
• Extremely easy to install .
• Use Civil , Sanitary version with preparation for possible military use .
TYPOLOGIESOFKIT
SPECIFICATIONS PV-CONT5KWP/500 PV-CONT8KWP/1500 PV-W-CONT15KWP/3000
PVv array power 5000Wp 8000Wp 10000Wp
Wind generator(¹) -- -- 6kW- Orizz (¹)
Battery capacity 500Ah/48VdckW 1500Ah/48VdckW 3000Ah/48VdckW
Sistem Voltage Vdc 48V 48V 48V
Inverter bidirect. (²) 230Vac 50HZ – 4kW 230Vac 50HZ – 8kW 400Vac 50HZ – 15kW 3 fase (¹) The wind generator is supplied with a bracket for anchoring to the ground, telescopic pole and mounting accessories. (²) The drive in question may, in the case of batteries, get charger. Then via a generating set of adequate power can be integrated battery charging in conditions of prolonged absence of sun or wind. Everything is automated by the same inverter. The electrical loads are powered directly from the generator when the generator turned on.
R
R
E
E
L
L
A
A
Z
Z
I
I
O
O
N
N
E
E
T
T
E
E
C
C
N
N
I
I
C
C
A
A
MULTIPURPOSE UNIT CENTRAL - ENERGY INDEPENDENT
MULTIPURPOSE UNIT CENTRAL , built with prefabricated modules and energetically autonomous groups in whether the majority of basic public services for a small isolated community .
Situated in the center of the small rural community serves as a reference point for city life every day. Inside it can locate the most important services such as:
- HEALTH ' : comprehensive outpatient medical dispensary , delivery room and minor surgery room, hospital and laboratory ( dentisteria possible ) , refrigerators for storing medicines and vaccines. - EDUCATION : n . 4 classrooms , one computer (complete with PC stations and INTERNET
connection )
- SOCIAL : n . 1 meeting lounge complete with television , VCR, and satellite receiver. In this room, in addition to meetings between the workers of the small village , can be projected ( with the help of the television ) movies about health awareness campaigns (AIDS , Contraception , Drugs , Alcohol , etc. ) or social .
- OFFICES : n . 2 units equipped for service Population , land management etc. .Annulla modificheCancel
The use of a hybrid system (photovoltaic-wind-genset) for the production of electricity will guarantee the energy autonomy multifunctional unit.
Built with modular elements, the structure can be modified according to the needs of the project or site. Can be expanded some services over others or you can add a second local time (not included in the project) thanks to the fully modular system of energy supply.
The roof of the building, through a system of gutters acts as a conveyor and a rainwater underground tank will to storage.
R
R
E
E
L
L
A
A
Z
Z
I
I
O
O
N
N
E
E
T
T
E
E
C
C
N
N
I
I
C
C
A
A
The lighting will be provided by a range of led lamps and a 6kW inverter unit will allow the use of various electrical components such as:
• Electromedicals (for hospital and laboratory);
• pumping and purifying water for human uses and health services; • PC stations complete with printers (for classrooms and offices); • Photocopying (for offices);
• TV, satellite receiver and VCR (for the meeting room and audio-visual); • Indoor and outdoor general lighting:
• Refrigeration conservation foodstuffs or medicines
ENERGY SUPPLY SYSTEM
The unit will be equipped with a system (specially dimensioned according to the energy balance) production and storage of electrical energy type HYBRID, with generator back-up generator.
A properly sized battery will ensure the power supply UNIT MULTI-PURPOSE up to 5 days of no-sun condition.
The wind generator will be provided only in areas with important characteristic wind, conversely there will be a greater PV array, or other sources may be used on the site such as hydroelectric and biomass.
R
R
E
E
L
L
A
A
Z
Z
I
I
O
O
N
N
E
E
T
T
E
E
C
C
N
N
I
I
C
C
A
A
SOLAR KIT WITH PORTABLE REFRIGERATOR
By partnering with leading companies in theindustry refrigeration ENERECO has developed a series of KIT refrigeration foodstuffs or medicines (vaccines, plasma, etc.) operating in photovoltaic energy, called FR1PRT
The kit series FR1PRT summarize all the basic features that such systems must ensure that: - Reliability
- Portability
- Easy to install even for non-experts
- Robustness and ease of use and maintenance.
Each kit comes complete with: - PV modules
- Control system of charging - battery
- Cable kit and various connections - Refrigerator compressor 12Vdc.
RANGE OF "FR1-PRT" by ENERECO AVAILABLE ENERGY SOLUTIONS
Technical Specifications FR1PRT/26 FR1PRT/41 FR1PRT/65
PV array power
75Wp 140Wp 150WpStructure TP/SDR TP/SDR TP/SDR
Charge regulator SLS8.8 SLX10 SLX20
Battery 12V/75Ah 12V/100Ah 12V/125Ah
Refrigerator VC26 VC41 VC65
Refrigerator capacity 26 litri 41 litri 65 litri
Kit cable and other mt 20 cavo HO7RNF 2x2,5 mt 20 cavo FG7 2x6 n. 100 cavallotti fix mt 20 cavo H07RNF 2x2.5 mt 20 cavo FG7 2x6 n. 100 cavallotti fix mt 20 cavo H07RNF 2x2.5 mt 20 cavo FG7 2x6 n. 100 cavallotti fix
There are additional sizes KIT "FR1-PRT" developed at the request of the customer
N.B. For the dimensioning of the systems described above were used in the following data: - Solar radiation minimum Site: 4.5 kWh / m² / day
- Coefficient Array / Load ratio: 1.1%
- No-sun days to computation capacity battery / PV: 4 days - Openings total daily fridge: <10 x 5 "each
R
R
E
E
L
L
A
A
Z
Z
I
I
O
O
N
N
E
E
T
T
E
E
C
C
N
N
I
I
C
C
A
A
SOLAR KIT WITH FRIDGE / FREEZER - DC
The units PF 166 and PF 240 are DC energy-efficient chillers more efficient that have ever been developed. They can be used as either a refrigerator or freezer and are fully programmable. The user can customize the settings of the internal temperature and perform other configurations.Therefore , the device is ideal for all utilities DC , including the conservation of medicines in hospitals . Thanks to the optimal electronic control and regulation of the speed of the compressor , the new energy efficiency class A + + + provides an extremely efficient use of energy . This leads to significant cost savings . A simple and intuitive operation thanks to a large digital display with setting options , high standards of quality and reliability and a long service life this product. The device , maintenance-free , it works with input voltage of 12 V or 24 V.
Thanks to these high-tech cooling units ENERECO ENERGY SOLUTIONS has been able to engineer some KIT reserved only to refrigeration FOOD , MEDICINES, ect .
RANGE OF "FR1-PRT" by ENERECO AVAILABLE ENERGY SOLUTIONS
Technical Specifications FR2-160/185 FR2-240/370
PV array power 185Wp 370Wp
Structure TP/SDR TP/SDR
Charge regulator ENER30 ENER30
Battery 24V/150Ah 24V/250Ah
Refrigerator PF160 PF240
Refrigerator capacity 160 litri 240 litri
Kit cable & Other mt 20 cavo FG7 2x2,5 mt 20 cavo FG7 2x6 n. 100 cavallotti fix
mt 20 cavo GG7 2x2.5 mt 20 cavo FG7 2x6 n. 100 cavallotti fix
There are additional sizes KIT "FR1-PRT" developed at the request of the customer
N.B. For the dimensioning of the systems described above were used in the following data: - Solar radiation minimum Site: 4.5 kWh / m² / day
- Coefficient Array / Load ratio: 1.1%
- No-sun days to computation capacity battery / PV: 4 days - Openings total daily fridge: <10 x 5 "each
R
R
E
E
L
L
A
A
Z
Z
I
I
O
O
N
N
E
E
T
T
E
E
C
C
N
N
I
I
C
C
A
A
COLD ROOMS FOR PHOTOVOLTAIC APPLICATIONS
REFRIGERATOR FOR NORMAL TEMPERATURE
Manufactured, designed for quick and easy installation, consisting of modular panels of the type SANDWICH composed of rigid polyurethane foam core and two shells in sheet galvanized plasticised non-toxic food complies with national and European regulations.
Complete with floor and reinforced door opening with both external and internal.
Art Insulation External Dimension. mm Door mm Floor CO323223 100 3200x3200x2300 900x1850H Renforced CO323226 100 3200x3200x2600 900x1850H Renforced CO505023 100 5000x5000x2300 900x1850H Renforced CO505026 100 5000x5000x2600 900x1850H Renforced Optional: finish on stainless steel sheet AISI 304/2b on each face , internally and externally. COOLING SYSTEM
Refrigeration plant -specific cells , suitable for the storage of foodstuffs that require a high humidity for their proper preservation (eg fish, yogurt) , consisting of:
Group condensing unit on a stainless steel base fan assembly zhiel ( better performance and longer life) filter assembly
indicator light moisture and gas charge unit cooler
Fittings and unions varies
expansion valve
solenoid coil +
Safety pressure
copper pipe connections for interior exterior cell 4 meters (considering the positioning of the motor on the roof of the cell )
watertight ceiling for interior lighting
lamp reinforced to withstand low temperatures Refrigerant
connectors and probes
Digital electronic tool for controlling lights , start and stop the engine, start and end defrost , the indoor temperature display
R
R
E
E
L
L
A
A
Z
Z
I
I
O
O
N
N
E
E
T
T
E
E
C
C
N
N
I
I
C
C
A
A
And also will be included in the delivery:
- Pre-assembly of all the components so that it remains to be carried out only evaporator positioning within the cell and the connection between fan evaporator (inside) and condensing unit (outside on the roof or in the immediate vicinity of the cell).
- Preparation of an electronic instrument on the electrical control panel.
- Execution of the electrical part can (a part will be made only with plant cell and mounted).
- Covering the refrigeration unit with special polyurethane paint that provides greater protection for all refrigeration components operating in a salty environment.
- frigoriferi funzionanti in un ambiente salmastro.
CONSUMPTION
External Dimension mm Refrigerator Total Power Voltage
3200x3200x2300 24m³ 1600W 400Vac 3F
3200x3200x2600 24m³ 1600W 400Vac 3F
5000x5000x2300 50m³ 3200W 400Vac 3F
5000x5000x2600 50m³ 3200W 400Vac 3F
The consumption in kWh / day depends on the external temperature, the amount of material handled daily and the time of daily opening of the door.
