Electrical

(1)

1 Deenbandhu Chhotu Ram University of Science & Technology, Murthal (Sonepat)

ORDINANCE FOR CREDIT BASED SYSTEM

for

BACHELOR OF TECHNOLOGY

(w.e.f. the academic session 2008-09)

(Including amendment suggested by 2

nd

_{meeting of the Academic Council)}

1 Preliminaries

1.1 This ordinances shall apply to UG programme in the University Teaching Departments. UG Programme

Courses Normal duration Extended duration B. Tech. Four Years (08 semesters) Seven Years

An academic year shall consist of two semesters (odd & even) of approximately 20 weeks duration inclusive of the period of examination and semester break. The eligibility criteria for admission to each programme, fee structure, academic calendar, scheme of studies and examinations, examination schedule, sports calendar and cultural activity calendar etc. for the academic year shall be published in the prospectus.

2. ORDINANCE: BACHELOR OF TECHNOLOGY

Notwithstanding anything contained in any other ordinance with regard to the matter hereunder, the courses of study for the Degrees of Bachelor of Technology and the conditions for admission thereto shall be as under: 2.1 The Bachelor of Technology Degree courses shall extend over a minimum period of four academic years.

However students will be admitted on the basis of 3 years diploma directly in the 2nd year under the LEET scheme. Teaching in each academic year shall be divided into two semesters, each semester extending to 20 weeks including practical, semester examination and semester break. Teaching for odd semesters will normally be from August to December and for even semesters from January to May.

2.2 At the end of the each semester, there shall be an examination wherein candidates shall be examined in the courses studied by them in that semester. Each semester examination shall be designated as First Semester Examination, Second Semester Examination, and Third Semester Examination and so on.

2.3 The Examination for all semester will normally be held in December/January and also in May/ June on such dates as may be fixed by the Controller of Examination as per the Schedule provided by the University. The date(s) of commencement of examination as well as the last date(s) for the receipt of examination forms and fees shall also be notified by the controller of Examinations to the concerned University Teaching Departments.

2.4.1.1 The courses of the study and the subjects of examinations shall be as approved by the Academic Council from time to time. The medium of instructions and Examination shall ordinarily be English except otherwise decided by the Academic Council. The question paper will be set in English, except otherwise decided by the board of studies concerned and approved by the Academic Council. Every candidate shall be examined in the subjects as laid down in the syllabus approved by the Academic Council from time to time. The credits for each subject as also the contact hours per week will be mentioned in the scheme of studies approved by the Academic Council. Evaluation Process:

a. Major Test (Theory Examination):

Written question papers for the semester examination shall be set by an External/ Internal paper setter appointed by the Vice-Chancellor from a panel of examiners submitted by the chairman of the department duly approved by

(2)

2

the BOS of the concerned department and the answer sheets shall generally be evaluated by the internal examiners but can be evaluated from outside experts with the permission of the Vice-Chancellor. At the most 50% question papers can be set by the external examiners. In case a question paper is not received in time from an external examiners or he refuses to set the question paper, the paper can be got set from an internal examiner. The evaluation of answer sheets will be done by the examiners as per the procedure laid down by the University for the purpose.

b. Practical Examination:

Examination in practical and viva-voce shall be conducted jointly by the external and Internal Examiners appointed by the Vice-Chancellor from a panel of examiners submitted by the chairman of the department duly approved by the BOS of the concerned. If an External Examiner is not able to join, alternate examiner (including those of the same University dept) may be appointed by the Chairperson of the concerned dept. with the intimation to the Controller of Examinations in the following preferential order:

i) From outside ii) from DCRUST Murthal c. Sesssionals (Internal Assessment):

Sessional (internal assessment)works shall be evaluated by the teachers of the various subjects based on the work done during semester on the basis of the following weightage:

I. For Theory subjects:

i) Minor Test –I 30% of the weightage of the sessional ii) Minor Test-II 30% of the weightage of the sessional iii) Assignment/Performance in the class 20% of the weightage of the sessional iv) Surprise Quiz/Tutorial Tests (2+2=4) 20% of the weightage of the sessional II. For Practical/Project/Seminar/Drawing:

i) Viva-Voce/ Test 30% of the weightage of the practical ii) Laboratory Record/Project Report/Seminar 40% of the weightage of the practical Report/Drawing Sheet

iii) Objective Tests/Multiple Choice Questions 30% of the weightage of the practical d. General Proficiency

I. Field Work 40% of the weightage

(Technical Activities/ Extra Curricular Activities/ Industrial, Educational tour/Sports/games/community Service/Hostel Activities) (equal weightage of each)

II. Presentation/Viva -Voce 40% of the weightage

III. Faculty Counselor Assignment 20% of the weightage

The I and II components will be evaluated by a committee, preferably interdisciplinary constituted by the Vice-Chancellor on recommendation of the Dean Academic Affairs. A Faculty Counselor will be attached to group of students which will remain associated with him /her during the entire period of the degree programe in the University. Each faculty member will serve as a faculty counselor. They will act like a local guardian for the students associated with him / her and will help them in terms of carrier guidance, personal difficulties.

(3)

3

Every student has to appear in both the minor tests. If a student does not take a minor test, he/she shall be awarded zero marks in that test. The marks obtained in sessional/practical/theory/drawing/general proficiency are to be submitted to the Examination Branch duly signed by the Chairperson of the department before the close of semester examination or a date fixed by the COE. The examination branch/course coordinator shall convert the marks in to equivalent grades as per the grading procedure.

The examination shall be open to a candidate who:

• has attended regularly the prescribed courses of studies for the relevant semester examination in the department recognized by the University for the degree of Bachelor of Technology.

• has his/her name submitted to the Controller of Examinations by the Chairperson of the department. • has a good moral character (certificate be issued by the chairperson of the department concern if required ). • has attended not less than 75% of the total classes held in each theory / lab/project/ seminar/ drawing etc.

This requirement shall be fulfilled separately for each subject of study. A deficiency up to 10% may be condoned by the Chairman of the department. A further condonation of 5% in attendance may be allowed in severe/ Compassionate circumstances by the Vice-Chancellor. However it may not be treated as a matter of right by the students. ( In case a student fails to fulfill the necessary requirement of the attendance in any subject(s) in any semester , he/ she shall not be promoted to next semester and will have to repeat that academic semester in the next academic session along with regular students.)

• whose result declaration is delayed for no fault of his/her or has applied for revaluation may attend classes of the next higher semester provisionally at his /her own risk and responsibility subject to his/her passing the concerned semester Examination. Such a candidate shall also be governed by the clause 2.6 given below. In case the candidate fails to pass the concerned Semester Examination, his / her attendance and studies in the next higher semester in which he /she was allowed to attend classes provisionally, shall stand cancelled. 2.6 If a candidate, after attending the classes for the course of studies in the Department either not appeared or

having appeared in any semester examination has failed in one or more paper(s) for that examination, he/she can appear for such paper(s) at subsequent examinations without attending a fresh course of studies for that semester. Such a candidate may, in the meantime, prosecute his / her studies for the next semester(s) and appear in the examination(s) for the same along with the examination for the lower semester(s).

2.7 The examinations for reappear in any subject(s) in the odd semester and that of in the even semester shall be held in the respective semesters along with the regular students. In addition to above, examination for reappear in the subjects in odd semesters will also be held during the even semesters examinations and vice-versa.

A candidate shall be eligible for promotion to (Effective from session 2009-10)

5th_semester _{if passed all papers of semester 1}st _semester.

6th_semester _{if passed all papers of 1}st_{and 2}nd_semesters.

7th_semester _{if passed all papers of 1}st_{, 2}nd_{and 3}rd_semesters.

8th_semester _{if passed all papers of 1}st_{, 2}nd_{, 3}rd_{and 4}th_semesters.

A Candidate through LEET Scheme shall be eligible for Promotion to: 5th_semester _{if passed all papers of 3}rd_semester.

(4)

4

7th_semester _{if passed all papers of 3}rd_{, 4}th_{and 5}th_semesters.

8th_semester _{if passed all papers of 3}rd_{, 4}th_{, 5}th _{and 6}th_semesters.

The amount of Exam/Reappear/ Re-evaluation/ Improvement fee to be paid by the candidates shall be as prescribed by the University from time to time. A candidate who has paid dues for the higher class and is dropped for want of fulfillment of any of the above conditions shall not be required to pay his dues again on re-admission after fulfillment of above conditions.

evaluation is permitted only for major tests (Theory course) as per University Rules for evaluation. The Re-evaluation is not permitted in the Studio Examination or in an examination which involve more than one examiner.

A candidate who is unable to pass the Bachelor of Technology Course within a maximum of seven consecutive academic years from the date of his admission shall lose the right to pursue the degree programme. In exceptional cases, mercy chance can be given by the Vice-Chancellor to a candidate if he/she applies.

2.8 The minimum passing marks/grade for passing any semester Examination shall be: i. 40% in each major test (theory paper).

ii. 40% in each Practical Examination/Viva-Voice Examination

iii. 40% in aggregate of sessionals and end semester theory examinations for each theory and practical subject provided that a candidate, who fails to obtain the requisite marks in aggregate of sessionals and end semester theory examination, shall be required to reappear in the concerned subject in the subsequent theory/practical examination(s) subject to clause 2.7. Such candidates will not be required to repeat the sessional (internal assessment) works.

iv. Minimum pass grade in each course is ‘D’ grade. Grade will be awarded after adding the marks of sessional (internal assessment) and major test/practical examination.

v. Grade D in General Proficiency vi. SGPA of 4.0

vii Where a course is evaluated on the basis of sessional (internal assessment) marks only i.e. there is no end-semester examination, the candidate will be required to secure at least 40% marks to pass the course.

A candidate who fails to obtain the requisite marks/grade in any course shall be required to appear in the concerned course in the subsequent examination(s) as per the clause 2.6&2.7.

2.9 If a candidate has completed his/her degree with a CGPA ≤ 6.5 and he/she wants to improve his/her grade, he/she may be allowed to improve by depositing the requisite fee as per the University Rules. He/she is allowed to appear in at the most half of the theory papers only of a semester along with the regular candidates of that semester and the sessional (internal assessment)part will be retained. Such opportunity may be given only twice in succession, subject to the condition that he/she have to complete the degree within 7 consecutive years of his/her registration. If the improved CGPA is less than the original, then the original will be retained.

2.10 The result of a student at the end of each semester Examination and after completion of course shall be declared on the basis of the SGPA & CGPA (cumulative grade point average) obtained by the student. However result of a student admitted through LEET SCHEME for the diploma holders will be declared on the basis of CGPA of the grades obtained by him/ in this University only.

(5)

5

2.11 At the end of each semester examination, the COE shall publish the result, provided that in a case where candidate who was permitted to take examination for higher semester but has not cleared the lower semester examination his result for the higher semester examination will be declared provisionally. Each successful candidate shall be issued a copy of the result card on having passed the semester examination.

2.12 Notwithstanding the integrated nature of the course wherever it is spread over more than one academic year, the Ordinance in force at the time a student joins the course shall hold good only for the examination held during or at the end of the semester and nothing in this Ordinance shall be deemed to debar the University from amending the Ordinance and the amended Ordinance, if any, shall apply to all students whether old or new.

3. SCHOLARSHIP:

Scholarship may be awarded to students as per the terms and conditions stipulated by the funding agencies. However, it should be mentioned in the prospectus.

4. THE CREDIT SYSTEM:

The University has introduced credit system of study for all the Under Graduate and Post Graduate programs for all the students admitted from the Academic Year 2008-09. The prominent features of the credit system are the process of continuous evaluation of a student’s performance, and a flexibility to allow the student to progress at an optimum pace.

Each Academic Program has a certain number of credits which describe its weightage. A student’s performance is measured by the number of credits that he/she has completed satisfactorily. A minimum grade point average is required to be maintained for satisfactory progress.

Each subject (component) has a certain number of credits which reflect its weightage and is normally decided on the basis of effective contacts hours. It is mentioned in the scheme of studies and examinations.

4.1 The semester examination for the odd semesters shall ordinarily be held in the month of December/January and for the even semesters in the month of May/June, on such dates as may be fixed by University authority. The concerned teacher/ course coordinator should ensure that 100% syllabus is covered in each subject before the Semester Examination.

4.2 A faculty member shall be appointed as a course-coordinator by the Chairperson of the department who shall have the full responsibility for conducting the minor tests, coordinating the work of evaluation with other faculty members involved in the course and awarding of grades. A common paper will be set for the minor tests of the common courses.

In case of perceptible deviation in the awards given by different teachers of the same course, the course co-ordinator will moderate the awards by calling meeting of the teachers associated. However, where a single teacher is associated with the course, moderation of awards will be done in consultation with the chairperson of the department.

4.3 For the time being the existing system of centralized examination will be followed for conducting the Semester Examination. However the system may be reviewed as the University grows and more and more number of departments/courses/students are added to it.

4.4 The marks/grade awarded to a student in any particular subject will be based on the performance of the student evaluated throughout the semester. The syllabus of the minor tests will be what is covered in that particular term. The Semester Examination will be based on the entire syllabus.

(6)

6

4.5 The marks/grades will be displayed on the notice board of the department by the Chairperson before forwarding it to the Examination Branch.

4.6 The Chairperson of the department shall forward the awards/grades to the Examination Branch within a week after the semester ends and examination process starts. The evaluated answer sheets of minor tests are to be kept by the course so-ordiantor for at least one year. The Examination Branch will keep the evaluated answer sheets of the semester examination for at least one year.

5. GRADING SYSTEM:

For the award of grades in a subject, all component-wise evaluation shall be done in marks. The marks would be converted to grades as per the guidelines given below:

5.1 Award of Grades Based on Absolute Marks

The University will follow system of grading for all (irrespective of no. of students) based on absolute marks (after applying moderation if any) as given below:

Range of Marks (%) Grade

90 to 100 A+ 80 to 89 A 70 to 79 B+ 62 to 69 B 55 to 61 C+ 46 to 54 C 40 to 45 D Less than 40 F Note:

(i) The awards/grades shall be submitted by the teacher concerned through course coordinator to the Chairperson of the department. The awards/grades should be finalized within 7 days of the semester examination.

(ii) In case of any difficulty/issue related to courses/conduct/moderation of awards/grades/reconduct of paper, the matter will be referred to a departmental monitoring committee comprising of Chairperson, senior most teachers by rotation, course coordinator and faculty nominee of the Dean of Faculty. The committee will be headed by the chairperson. The committee, on receipt of complaint from student or teacher, shall meet at the earliest and will give its decision within one week. The decision of the committee shall be final.

(iii) The procedure for evaluation and award of grades for professional training shall be decided by the respective Chairman/Chairperson of the department. The candidate shall be required to submit a comprehensive report within one month of completion the training. Training Report will be completed under the supervision of the officer of the company/institution under whose guidance and supervision the training was completed by the candidate in that company/institute. The candidate will add supervisor’s certificate in the beginning of the report stating that the report is an out-come of work done by the candidate during his/her training.

iv While calculating percentage of marks to award grades, 0.5 or higher fraction may be raised to the next higher whole number.

5.2 GRADE POINTS:

(7)

7

Academic Performance Grades Grade Points

Outstanding A+ 10 Excellent A 9 Very Good B+ 8 Good B 7 Average C+ 6 Below Average C 5 Marginal D 4 Very Poor F 0 Absent G - Audit Pass AP - Audit Fail AF - Incomplete Dissertation X - Note:

1. Pass Grade is Grade D and higher grades. 2. Grade F is Fail grade. ‘F’ Grade

The F grade denotes poor performance, i.e. failing a subject (or subject component). A student has to reappear in the semester examination only, in which he/she obtains ‘F’ grades, until a passing grade is obtained, within the stipulated time of completion of that programme.

‘G’ Grade

If any student, who is otherwise eligible for appearing in the semester examination as per the ordinance, but he/she is unable to appear in the semester examination then he /she will be awarded ‘G’ grade. The candidate will be allowed to take up the examination next time along with regular students and he /she will be awarded the grade as per grade system explained above.

AP/AF Grade

These grades are awarded to qualifying/Non-Credit subject(s) (as per scheme supplied by concerned departments). The candidate will not be eligible for award of degree without qualifying these courses.

Continuous Absence

If a student is continuously absent from the Department for more than four weeks without intimation to the Chairperson of Department, his/her name will be struck off from the roll of department. The re-admission shall not be allowed to the candidate during the same academic session.

‘X’ Grade

This grade is awarded for incomplete Project work as per guidelines given below and will be converted to a regular grade on the completion of the Project work and its evaluation.

A student who is unable to complete his/her Project may be awarded an ‘X’ grade by the Chairman/Chairperson/chairperson on the recommendation of his/her supervisor.

A student who has been awarded ‘X’ grade shall be required to formally register for the next semester and pay the requisite fee.

‘X’ grade will be awarded in exceptional circumstances beyond student’s/supervisor’s control. Normally, the following grounds may be considered for the award of ‘X’ grade:

(8)

8

(a) Technical reasons/grounds such as Supervisor/equipment not being available. (b) Any other reason to the satisfaction of supervisor.

5.3 Evaluation of Performance

The performance of a student will be evaluated in terms of Cumulative Grade Point Average (CGPA) which is the Grade Point Average for all the completed semesters at any point of time.

The CGPA is calculated on the basis of all pass grades, except audit courses, obtained in all completed semesters. • Regarding evaluation of performance.

The formula for calculating SGPA is as mentioned below:

∑

≡ SEM SEM

courses

audit

except

subject)

a

in

earned

credits

(Total

courses

audit

except

Total

credits

earned

in

a

subject x

Grade

points

out

of

total

marks

in

a

concerned

subject)

( SGPA

Illustration for calculating SGPA/CGPA: Ist Semester

Course No.

(1) Course Credits (2) Grade Awarded (3) Earned Credits (4) Grade Points (5) Point Secured (6)

MALXXX 5 C+ 5 6 30 CSLXXX 4 C 4 5 20 PHLXXX 4 A+ 4 10 40 PHPXXX 1.5 B+ 1.5 8 12 MELXXX 4 F 0 0 00 AMLXXX 4 B 4 7 28

Credits registered in the semester (total of column 2) = 22.5

Earned Credits in the semester = 18.5

Total of column 4 (total of column 2 excluding F grade) Point secured in this semester in passed courses = 130 SGPA = Points secured in passed courses 7.027130

earned 18.5

Credits = =

IInd Semester Course No.

(1) Course Credits (2) Grade Awarded (3) Earned Credits (4) Grade Points (5) Point Secured (6)

MALXXX 5 D 5 4 20 EELXXX 5 F 0 0 00 CYLXXX 4 B 4 7 28 CYPXXX 1.5 C+ 1.5 6 09 MELXXX 4 A 4 9 36 HULXXX 2 AP 2 N.A. 00

Credits registered in the semester (total of column 2) = 21.5

Earned Credits in the semester =14.5

(9)

9

Cumulative Earned Credits (earned credits in previous semesters and current semester) = 18.5+14.5=33.0

Points Secured in this semester in passed courses = 93

Cumulative points secured (total of point secured in previous semesters and current semester) = 130 + 93 = 223 CGPA =

6.757

14.5

18.5

93

130 courses

audit

excluding

credits,

earned

Cumulative

courses

passed

all

in

secured

points

Cumulative

₌

+

=

Each successful candidate shall be issued a copy of the result card on having passed the semester examination. • Regarding Conversion of CGPA into Marks

The CGPA if multiplied by 9.5 will give the equivalent marks in %age.

Candidates who pass all the prescribed subjects for all the semesters, but obtained:- (i) Less than CGPA of 5.26 Pass class

(ii) 5.26≤ CGPA<6.32 2nd_Division

(iii) 6.32≤ CGPA<7.9 1st_Division

(iv) CGPA of 7.9 or more 1st_{Division with Honours provided that they have passed all the}

semester examinations in single sitting within the normal period of course and without reappear in any paper throughout the programme. will be awarded aforesaid division.

(10)

10 SCHEME

OF

(11)

11 Deenbandhu Chhotu Ram University of Science & Technology, Murthal (Sonepat)

SCHEME OF STUDIES & EXAMINATIONS

B. Tech. 1

st

YEAR (SEMESTER – I) (COMMON FOR ALL BRANCHES)

Credit Based Scheme w.e.f. 2008-09

Sr. N o.

Course

No. Course Title Teaching Schedule Marks of Class Work

Exam. Marks Total

Marks Credit Duration of Exam. L T P Total Theory Practic

al 1 HUM-101 ESSENTIALS OF COMMUNICATION 3 1 - 4 50 100 - 150 4 3 2 MATH-101 MATHEMATICS-I 3 2 - 5 50 100 - 150 5 3 3 PHY-101 PHYSICS-I 3 1 - 4 50 100 - 150 4 3 4 ME-103 CH-101 MANUFACTURING PROCESSES (Gr – A) CHEMISTRY (Gr - B) 4 3 - 1 - - 4 4 50 50 100 100 - - 150 150 4 4 3 3 5 CSE-101 EE-101 FUNDAMENTALS OF

COMPUTER & PROGRAMMING IN C (Gr – A) ELECTRICAL TECHNOLOGY (Gr - B) 3 3 - 1 - - 3 4 50 50 100 100 - - 150 150 3 4 3 3 6 GES-101 ENVIRONMENTAL STUDIES (Gr - B) 3 - - 3 - 75 - 75* 0 3 7 ME-101 ME-105 ELEMENTS OF MECHANICAL ENGINEERING (Gr – A) ENGINEERING GRAPHICS &

DRAWING (Gr - B) 3 - 1 - - 4 4 4 50 50 100 - - 100 150 150 4 4 3 3 8 PHY-103 PHYSICS LAB – I - - 2 2 25 - 25 50 2 3 9 ME-107 CH-103 WORKSHOP PRACTICE (Gr – A) CHEMISTRY LAB (Gr - B) - - - - 4 2 4 2 25 25 - - 25 25 50 50 4 2 3 3 10 CSE-103 EE-103 COMPUTER PROGRAMMING LAB (Gr – A) ELECTRICAL TECHNOLOGY LAB (Gr - B) - - - - 2 2 2 2 25 25 - - 25 25 50 50 2 2 3 3 11 ME-109 ELEMENTS OF MECH.

ENGINEERING LAB (Gr – A) - - 2 2 25 - 25 50 2 3 12

GES-103 ENVIRONMENTAL STUDIES FIELD WORK (Gr - B) - - - 25 25* 0 3 TOTAL ( Gr-A / Gr-B) 19/18 5/6 10/10 34/34 400/375 600/500 100/175 1100/1050 34/31

*Not included in total marks. Note:

1. GROUP A will study the subjects (ME-101,ME-103,CSE-101,ME-107,CSE-103,ME-109) GROUP B will study the subjects (ME-105, CH-101, EE-101, CH-103, EE-103, GES-101, GES-103)

2. GROUP A includes students of branches BME, BT, CSE, ECE. GROUP B includes students of branches CE, CHE, EE, ME.

3. Environmental Studies (GES-101) and Environmental Studies Field Work (GES-103) are qualifying courses. 4. Students will be allowed to use non-programmable scientific calculator. However, sharing of calculator will not be

(12)

12 Deenbandhu Chhotu Ram University of Science & Technology, Murthal (Sonepat)

SCHEME OF STUDIES & EXAMINATIONS

B. Tech. 1

st

YEAR (SEMESTER – II) (COMMON FOR ALL BRANCHES)

Credit Based Scheme w.e.f. 2008-09

Sr. N o.

Course

No. Course Title Teaching Schedule Marks of Class Work

Exam. Marks Total

Marks Credit Duration of Exam. L T P Total Theory Practica

l 1 HUM-102 BTT -102 COMMUNICATION SKILLS IN ENGLISH (Except BT) BASICS OF BIOTECHNOLOGY ( Only BT) 3 3 1 1 - - 4 4 50 50 100 100 - - 150 150 4 4 3 3 2 MATH-102 MATHEMATICS-II 3 2 - 5 50 100 - 150 5 3 3 PHY-102 PHYSICS-II 3 1 - 4 50 100 150 4 3 4 ME-103 CH-101 MANUFACTURING PROCESSES ( Gr - B) CHEMISTRY ( Gr – A) 4 3 - 1 - - 4 4 50 50 100 100 - - 150 150 4 4 3 3 5 CSE-101 EE-101 FUNDAMENTALS OF COMPUTER & PROGRAMMING IN C (Gr - B) ELECTRICAL TECHNOLOGY ( Gr – A) 3 3 - 1 - - 3 4 50 50 100 100 - - 150 150 3 4 3 3 6 GES-101 ENVIRONMENTAL STUDIES

( Gr – A) 3 - - 3 - 75 - 75* 0 3

7 ME-101 ME-105

ELEMENTS OF MECH.

ENGINEERING ( Gr - B) ENGINEERING GRAPHICS & DRAWING (Gr – A) 3 - 1 - - 4 4 4 50 50 100 - - 100 150 150 4 4 3 3

8 PHY-104 PHYSICS LAB – II - - 2 2 25 - 25 50 2 3

9 ME-107

CH-103 WORKSHOP PRACTICE (Gr- B) CHEMISTRY LAB ( Gr – A) - - - - 4 2 4 2 25 25 - - 25 25 50 50 4 2 3 3 10 CSE-103 EE-103 COMPUTER PROGRAMMING LAB ( Gr - B) ELECTRICAL TECHNOLOGY LAB (Gr – A) - - - - 2 2 2 2 25 25 - - 25 25 50 50 2 2 3 3 11 ME-109 ELEMENTS OF MECH. ENGG.

LAB (Gr - B) - - 2 2 25 - 25 50 2 3 12 GES-103 ENVIRONMENTAL STUDIES

FIELD WORK (Gr – A) * - - - - 25 25* 0 3

13 GP-102 GENERAL PROFICIENCY - - - - 50 - - 50 2 -

TOTAL (Gr-B/ Gr-A) 19/18 5/6 10/10 34/34 450/425 600/500 100/175 1150/1100 36/33 * Not included in total marks.

Note:

1. GROUP A will study the subjects (ME-105, CH-101, EE-101, CH-103, EE-103, GES-101, GES-103). GROUP B will study the subjects (ME-101, ME-103, CSE-101, ME-107, CSE-103, ME-109). 2. GROUP A includes students of branches BME, BT, CSE, ECE.

GROUP B includes students of branches CE, CHE, EE, ME.

3. Environmental Studies (GES-101) and Environmental Studies Field Work (GES-103) are qualifying courses. 4. Students will be allowed to use non-programmable scientific calculator. However, sharing of calculator will not be

(13)

13 DEENBANDHU CHHOTU RAM UNIVERSITY OF SCIENCE & TECHNOLOGY, MURTHAL, SONEPAT

SCHEME OF STUDIES & EXAMINATIONS

B.TECH. 2

nd

YEAR (SEMESTER – III) ELECTRICAL ENGINEERING

Credit Based Scheme w.e.f. 2009–2010

S.

No. Course No. Course Title Teaching Schedule Marks of Class Work

Examination

Marks Marks Total Credits Total Duration of Exam L T P Total

Hrs. Theory Prac. 1.

HUM-201 ECONOMICS (Common for all Branches) 3 1 - 4 50 100 - 150 4 3 2.

MATH-201 MATHEMATICS - III (Common for all Branches) 3 2 - 5 50 100 - 150 5 3 3. EE-201 ELECTRICAL ENGINEERING

MATERIALS & SEMICONDUCTOR DEVICES

3 1 - 4 50 100 - 150 4 3

4. EE-203 NETWORK THEORY (EE, EL) 3 1 - 4 50 100 - 150 4 3 5. EE-207 ELECTRICAL MACHINES-I 3 1 - 4 50 100 - 150 4 3 6. EE-209 ELECTRICAL MEASUREMENTS &

MEASURING INSTRUMENTS 3 1 - 4 50 100 - 150 4 3

7. EE-223 NETWORK THEORY LAB. (EE, EL) - - 2 2 25 - 25 50 2 3 8. EE-211 ELECTRICAL MEASUREMENTS &

MEASURING INSTRUMENTS LAB. - - 2 2 25 - 25 50 2 3 9. EE-231 ELECTRICAL WORKSHOP (EE,

EL,CHE) - - 2 2 25 - 25 50 2 3

10. EE-215 ELECTRICAL MACHINES-I LAB. - - 3 3 50 - 50 100 3 3

TOTAL 18 07 09 34 425 600 125 1150 34

Note:

1. Students are allowed to use non-programmable scientific calculator in the examination. However, sharing of calculator & any other items is not permitted in the examination.

(14)

14 DEENBANDHU CHHOTU RAM UNIVERSITY OF SCIENCE & TECHNOLOGY, MURTHAL, SONEPAT

SCHEME OF STUDIES & EXAMINATIONS

B.TECH. 2

nd

YEAR (SEMESTER – IV) ELECTRICAL ENGINEERING

Credit Based Scheme w.e.f. 2009–2010

S.

No. Course No. Course Title Teaching Schedule Class Work Marks of Examination Marks Marks Total Total Credit Duration of Exam L T P Total

Hrs. Theory Prac. 1.

HUM-202 FUNDAMENTALS OF MANAGEMENT (EE, EL, ME, CHE)

3 1 - 4 50 100 - 150 4 3

2.

MATH-202 NUMERICAL METHODS (EE, EL, CHE) 3 2 - 5 50 100 - 150 5 3 3. ECE-202 ANALOG ELECTRONICS

(EL,EE) 3 1 - 4 50 100 - 150 4 3

4. ECE-204 DIGITAL ELECTRONICS (EL, EE, common with CSE 3rd

semester)

3 1 - 4 50 100 - 150 4 3

5. ECE-206 COMMUNICATION

SYSTEMS (EL, EE ) 3 1 - 4 50 100 - 150 4 3

6. EE-208 ELECTRO MAGNETIC THEORY

(EE, EL)

3 1 - 4 50 100 - 150 4 3

7. ECE-222 ANALOG ELECTRONICS

LAB (EL, EE) - - 2 2 25 - 25 50 2 3

8. ECE-224 DIGITAL ELECTRONICS

LAB (EL, EE) - - 2 2 25 - 25 50 2 3

9. ECE-226 COMMUNICATION

SYSTEMS LAB (EL, EE) - - 2 2 25 - 25 50 2 3

10.

MATH-204 NUMERICAL METHODS LAB (EE, EL, CHE)

- - 2 2 25 - 25 50 2 3

11.

GPEE-202 GENERAL PROFICIENCY - - - - 50 - - 50 2 3

TOTAL 18 07 08 33 450 600 100 1150 35

Note:

1. Each student has to undergo Professional Training-I of at least 4 weeks from the industry / institute / research lab / training centre, etc. during summer vacation at the end of 4th _{Semester & its evaluation shall be carried out in 5}th

Semester.

2. Students are allowed to use non-programmable scientific calculator. However, sharing of calculator & any other items is not permitted in the examination.

(15)

15 DEENBANDHU CHHOTU RAM UNIVERSITY OF SCIENCE & TECHNOLOGY, MURTHAL, SONEPAT

SCHEME OF STUDIES & EXAMINATIONS

B.TECH. 3

rd

YEAR (SEMESTER – V) ELECTRICAL ENGINEERING

Credit Based Scheme w.e.f. 2010–2011

S.

No. Course No. Course Title Teaching Schedule Marks of Class Work

Examination

Hrs. Theory Prac.

1. EE-311 ELECTRICAL MACHINES-II 3 1 - 4 50 100 - 150 4 3 2. ECE-303 ELECTRONIC MEASUREMENT

AND INSTRUMENTATION (EE, EL)

3 1 - 4 50 100 - 150 4 3

3. ECE-305 ANALOG ELECTRONIC

CIRCUITS (EE, EL) 3 1 - 4 50 100 - 150 4 3

4. EE-315 POWER SYSTEMS-I 3 1 - 4 50 100 - 150 4 3

5. EE-317 POWER ELECTRONICS 3 1 - 4 50 100 - 150 4 3

6. EE-313 MICROPROCESSOR (8085), INTERFACING &

APPLICATIONS

3 1 - 4 50 100 - 150 4 3

7. ECE-323 ELECTRONIC MEASUREMENT &

INSTRUMENTATION LAB (EE, EL)

- - 2 2 25 - 25 50 2 3

8. EE-321 POWER ELECTRONICS LAB. - - 2 2 25 - 25 50 2 3 9. EE-319 MICROPROCESSOR (8085),

INTERFACING & APPLICATIONS LAB.

- - 2 2 25 - 25 50 2 3

10. EE-327 ELECTRICAL MACHINES-II

LAB. - - 3 3 25 - 25 50 3 3

11. EE-333 PROFESSIONAL TRAINING-I - - 2 2 50 - - 50 2 -

TOTAL 18 06 11 35 450 600 100 1150 35

Note:

1. Assessment of Professional Training-I, undergone in summer vacations at the end of 4th_{semester, will be based}

on seminar, viva-voce, report & certificate of professional training obtained by the students from the industry / institute / research lab / training center, etc.

(16)

16 DEENBANDHU CHHOTU RAM UNIVERSITY OF SCIENCE & TECHNOLOGY, MURTHAL, SONEPAT

SCHEME OF STUDIES & EXAMINATIONS

B.TECH. 3

rd

YEAR (SEMESTER – VI) ELECTRICAL ENGINEERING

Credit Based Scheme w.e.f. 2010–2011

S.

no. Course No. Course Title Teaching Schedule Marks of Class Work

Examination

Marks Marks Total Total Credits Duration of Exam L T P Total

1. EE-312 POWER SYSTEMS –II 3 1 - 4 50 100 - 150 4 3

2. EE-314 CONVENTIONAL & CAD OF

ELECTRIC MACHINES 3 1 - 4 50 100 - 150 4 3

3. EE-316 ADVANCED MICROPROCESSOR

AND MICRO-CONTROLLER 3 1 - 4 50 100 - 150 4 3

4. EE-304 CONTROL SYSTEMS ENGG. (EE,

EL) 3 1 - 4 50 100 - 150 4 3

5. EE-318 ELECTRIC POWER GENERATION 3 1 - 4 50 100 - 150 4 3 6. ECE-310 DIGITAL SYSTEM DESIGN (EE, EL,

CSE) 3 1 - 4 50 100 - 150 4 3

7. EE-324 CONTROL SYSTEMS ENGG. LAB

(EE, EL) - - 2 2 25 - 25 50 2 3

8. EE-320 ADVANCED MICROPROCESSOR

AND MICRO-CONTROLLER LAB - - 2 2 25 - 25 50 2 3

9. EE-326 CONVENTIONAL & CAD OF

ELECTRIC MACHINES LAB - - 2 2 25 - 25 50 2 3

10. EE-328 POWER SYSTEMS LAB - - 2 2 25 - 25 50 2 3

11.

GPEE-302 GENERAL PROFICIENCY - - - - 50 - - 50 2 3

TOTAL 18 06 08 32 450 600 100 1150 34

Note:

1. Each student has to undergo Professional Training-II of at least 4 weeks from the industry / institute / research lab / training center etc. during summer vacation at the end of 6th_{semester & its evaluation shall be carried out in 7}th

semester.

(17)

17 DEENBANDHU CHHOTU RAM UNIVERSITY OF SCIENCE & TECHNOLOGY, MURTHAL, SONEPAT

SCHEME OF STUDIES & EXAMINATIONS

B.TECH. 4

th

YEAR (SEMESTER – VII) ELECTRICAL ENGINEERING

Credit Based Scheme w.e.f. 2011-2012

S. N o.

Course

No. Course Title Teaching Schedule Marks of Class Work

Examination

1. ECE-401 DATA COMMUNICATION (EE, EL) 3 1 - 4 50 100 - 150 4 3

2. EE-403 ELECTRIC DRIVES 3 1 - 4 50 100 - 150 4 3

3. ECE-407 DIGITAL SIGNAL PROCESSING (EE,

EL ) 3 1 - 4 50 100 - 150 4 3

4. EE-411 POWER SYSTEM OPERATION AND

CONTROL 3 1 - 4 50 100 - 150 4 3

5. *OPEN ELECTIVE 4 - - 4 50 100 - 150 4 3

6. EE-413 ELECTRIC DRIVES LAB. 2 2 25 - 25 50 2 3

7. ECE-421 DATA COMMUNICATION LAB (EE,

EL) - - 2 2 25 - 25 50 2 3

8. ECE-427 DIGITAL SIGNAL PROCESSING LAB

(EE, EL) - - 2 2 25 - 25 50 2 3

9. EE-415 PROJECT - - 4 4 50 - - 50 4 3

10. EE-417 PROFESSIONAL TRAINING – II - - 2 2 50 - - 50 2 -

TOTAL 16 04 12 32 425 500 75 1000 32

LIST OF OPEN ELECTIVES:

1. HUM-451 LANGUAGE SKILLS FOR

ENGINEERS 8. CSE-409 ARTIFICIAL INTELLIGENCE & EXPERT SYSTEMS 2. HUM-453 HUMAN RESOURCE

MANAGEMENT 9. CSE-301 PRINCIPLES OF OPERATING SYSTEMS

3. HUM-457 BUSINESS COMMUNICATION 10. EE-455 INTELLIGENT INSTRUMENTATION FOR ENGINEERS 4. HUM-455 ENTREPRENEURSHIP 11. ECE-403 EMBEDDED SYSTEMS DESIGN

5. PHY-451 NANO TECHNOLOGY 12. CH-453 POLLUTION & CONTROL

6. PHY-453 LASER TECHNOLOGY 13. CSE-411 MANAGEMENT INFORMATION SYSTEM 7. ME-451 MECHATRONICS SYSTEMS 14. CSE-308 MULTIMEDIA TECHNOLOGIES

Note:

1. Assessment of Professional Training-II, undergone in summer vacations at the end of 6th_{semester, will be based}

on seminar, viva-voce, report & certificate of professional training obtained by the students from the industry / institute / research lab / training centre, etc.

2. *Student will be permitted to opt for any one elective run by other departments. However, departments will offer only those electives for which they have expertise. The choice of students for any elective shall not be a binding for department to offer, if department does not have expertise.

3. Project load will be treated as 2 hrs. per week for project coordinator including his own guiding load of 1 hour, and 1 hour for each participating teacher irrespective of number of students/groups under him/her. Project will commence in VII Semester where student will identify project problem, complete design, procure the material, start the fabrication, complete the survey, etc. depending upon nature of the problem. Project will continue in VIII semester.

4. Students will be allowed to use non-programmable scientific calculator in the examination. However, sharing of calculator & any other items is not permitted in the examination.

(18)

18 DEENBANDHU CHHOTU RAM UNIVERSITY OF SCIENCE & TECHNOLOGY, MURTHAL, SONEPAT

SCHEME OF STUDIES & EXAMINATIONS

B.TECH. 4

th

YEAR (SEMESTER – VIII) ELECTRICAL ENGINEERING

Credit Based Scheme w.e.f. 2011-2012

S.

No. Course No. Course Title Teaching Schedule Marks of Class Work

Examination

Marks Marks Total Total Credits Duration of Exam L T P Total

Hrs. Theory Prac. 1. EE-406 ADVANCED CONTROL

SYSTEMS 3 1 - 4 50 100 - 150 4 3

2. EE-408 COMPUTER APPLICATIONS TO

POWER SYSTEM ANALYSIS 3 1 - 4 50 100 - 150 4 3

3. DEPT. ELECTIVE – I 4 - - 4 50 100 - 150 4 3

4. DEPT. ELECTIVE – II 4 - - 4 50 100 - 150 4 3

5. EE-410 COMPUTER APPLICATIONS TO POWER SYSTEM ANALYSIS LAB.

- - 2 2 50 - 50 100 2 3

6. EE-412 SEMINAR - - 2 2 50 - - 50 2

7. EE-415 PROJECT - - 8 8 50 - 100 150 8 3

8.

GPEE-402 GENERAL FITNESS FOR THE PROFESSION - - - 100 100 4 3

TOTAL 14 02 12 28 350 400 250 1000 32

DEPT. ELECTIVE – I EE-432 EHV AC / DC

EE-434 ADVANCED INSTRUMENTATION EE-424 FUZZY CONTROL SYSTEM (EE, EL)

EE-438 RECENT TRENDS IN DE-REGULATED POWER SYSTEMS EE-466 UTILIZATION OF ELECTRIC POWER & TRACTION DEPT. ELECTIVE – II

EE-442 HIGH VOLTAGE ENGINEERING EE-444 ELECTRICAL POWER QUALITY EE-446 ARTIFICIAL INTELLIGENCE

EE-426 COMPUTER-BASED INSTRUMENTATION & CONTROL EE-450 POWER MANAGEMENT

Note:

1. Project load will be treated as 2 hrs. per week for the project coordinator including his own guiding load of 1 hour, and 1 hour for each participating teacher irrespective of number of students / groups under him / her. Project involving design, fabrication, testing, computer simulation, case studies etc., which has been commenced by students in VII semester will be completed in VIII semester.

2. For the subject EE-412-Seminar, a student will select a topic from emerging areas of Engineering and Technology and study it independently. Student will give a seminar talk on the topic.

3. A team consisting of Dean of faculty, Chairperson of the department & an external examiner appointed by University shall carry out the evaluation of the student for his / her General Fitness for the Profession.

4. Students will be allowed to use the non-programmable scientific calculator. However, sharing of calculator will not be permitted in the examination.

(19)

19

(20)

20 HUM – 101 ESSENTIALS OF COMMUNICATION

B. Tech. Semester - I (Common for all Branches)

L T P Credits Class Work : 50 Marks

3 1 -- 4 Examination : 100 Marks

Total : 150 Marks

Duration of Examination : 3 Hours

The course aims at inculcating a minimum level of language proficiency among students of Engineering and Technology. The purpose is to sensitize them to the nuances of English and its applications for various communication needs.

COURSE CONTENT:

Unit-I: Semantics: Synonyms, Antonyms, Homophones, Homonyms, Form and function of words Unit-II: Syntax: Sentence structures, Verb patterns and their usage

Unit-III: Phonetics: Basic Concepts – Vowels, Consonants, Phonemes, Syllables; Articulation of Speech Sounds – Place and Manner of Articulation; Transcription of words and simple sentences, using International Phonetic Alphabet.

Unit-IV: Comprehension: Listening and Reading comprehension – Note taking, Reviewing, Summarising, Interpreting, Paraphrasing and Précis Writing.

Unit-V: Composition: Descriptive, Explanatory, Analytical and Argumentative Writing - description of simple objects like instruments, appliances, places, persons, principles; description and explanation of processes and operations; analysis and arguments in the form of debate and group discussion

Unit-VI: Text: English for Students of Science by A.Roy and P.L. Sharma (Orient Longman)

Chapters for Study:

i) "The year 2050" by Theodore J. Gordon.

ii) "The Mushroom of Death" by A. Bandhopadhyay. iii) "The Discovery" by Herman Ould.

The prescribed text will be used as a case study for various components of the syllabus.

Unit-VII (For Internal Evaluation Only): Book Review – Herein the students will be required to read and submit a review of a book (Literary or non-literary) of their own choice. This will be followed by a presentation of the same in the class.

TEXT BOOKS:

1. English for Students of Science edited by A. Roy and P.L. Sharma, Orient Longman. 2. Spoken English for India by R.K. Bansal and J.B. Harrison, Orient Longman.

3. Intermediate Grammar, Usage and Composition by M.L. Tickoo and A.E. Subramanian, Orient Longman. SUGGESTED READING:

1. English Grammar, Composition and Correspondence by M.A. Pink and S.E. Thomas, S. Chand and Sons Pvt. Ltd.,Delhi.

2. A Practical English Grammar by Thomson and Martinet, OUP, Delhi. 3. Guide to Patterns and Usage in English by A.S. Hornby, OUP, Delhi.

4. A Textbook of English Phonetics for Indian Students by T. Balasubramanian, MacMillan, Chennai. 5. Better English Pronunciation by J.D.O’Connor, Cambridge Univ. Press, London.

(21)

21

6. English Vocabulary in Use by McCarthy, Foundation Books (Cambridge University Press), Delhi. 7. Assessing Listening by Buck, Foundation Books (Cambridge University Press), Delhi.

8. Reading Between the Lines by McRae, Foundation Books (Cambridge University Press), Delhi. SCHEME OF EXAMINATION:

There will be seven questions in all covering all the units, except Unit VII which (besides other modes of internal evaluation) is for internal assessment only.

All questions will be compulsory and will have sufficient internal choice. Unit-I: 15 Marks

The question will be set so as to evaluate the following: Usage of the words given, Changing the grammatical quality and function of the words, One word Substitutes, synonyms, antonyms, homophones, homonyms.

Unit-II: 20 Marks

There will be one question having different parts. The question should test students’ knowledge of sentence structures and verb patterns. The question can be in the nature of ‘Do as directed’, ‘Tracing and rectifying structural

Errors’, ‘Elucidating patterns through sentences and vice-versa’, ‘Changing the word-order’, ‘Synthesizing the sentences’ and ‘Completing the sentences’, etc.

Unit-III: 15 Marks

There will be two questions from this Unit. Question one will be in the nature of short notes testing the basic concepts and articulation of speech sounds. The second question would require transcription of individual words and simple sentences. Unit-IV: 15 Marks

Comprehension and Interpretation of a passage given (Literary or non-literary, newspaper article, story, extract from a speech etc.), will be judged for its vocabulary, general understanding and interpretation of the content in the form of question answer exercise, culling out important points, suggesting a suitable topic/title, summarising and précis writing etc.

Unit-V: 15 Marks

The question will require the definition, description, analysis, explanation of various objects and processes. Bedsides, a topic of contemporary relevance may be given for writing a paragraph in any one of the writing forms prescribed in the unit.

Unit-VI: 20 Marks

There will be two questions from the text prescribed. The first question will evaluate the comprehension of the text through short answer questions or a long answer question.

The second question will judge the linguistic aspect of the text such as using a particular word in its various syntactic forms like noun, adjective, verb etc.; matching the lists of words and their explanation; providing opposite/similar meanings, adding suffixes and prefixes etc.

(22)

22 MATH – 101 MATHEMATICS - I

B. Tech. Semester - I (Common for all Branches)

Duration of Examination : 3 Hours Part - A

Infinite series: Convergence and divergence, Comparison, D' Alembert's ratio, Integral, Raobes, Logrithmic and Cauchy root tests, Alternating series, Absolute and conditional convergence.

Applications of Differentiation: Taylor's and Maclaurin's series, Asymptotes, Curvature Asymptotes.

Partial Differentiation & its Applications: Functions of two or more variables; partial derivatives, Total differential and differentiability, Derivatives of composite and implicit functions, Jacobians, Higher order partial derivatives. Homogeneous functions, Euler's theorem, Taylor's series for functions of two variables (without proof), maxima-minima of function of two variables, Lagrange's method of undetermined multipliers, Differentiation under integral sign.

Part - B

Applications of Single & Multiple Integration: Applications of single integration to find volume of solids and surface area of solids of revolution. Double integral, change of order of integration, Double integral in polar coordinates, Applications of double integral to find area enclosed by plane curves and volume of solids of revolution.

Triple integral, volume of solids, change of variables, Beta and gamma functions and relationship between them. Vector Calculus : Differentiation of vectors, scalar and vector point functions Gradient of a scalar field and directional derivative, divergence and curl of a vector field and their physical interpretations.

Integration of vectors, line integral, surface integral, volume integral, Green, Stoke's and Gauss theorems (without proof) and their simple applications.

TEXT BOOKS:

1. Advanced Engineering Mathematics : F. Kreyszig. 2. Higher Engineering Mathematics : B.S. Grewal. REFERENCE BOOKS:

1. Engineering Mathematics Part-I: S.S. Sastry. 2. Differential and Integral Calculus: Piskunov.

3. Advanced Engineering Mathematics: R.K. Jain and S.R.K. Iyengar 4. Advanced Engg. Mathematics: Michael D. Greenberg

Note: Examiner will set eight questions, taking four from Part-A and four from Part-B. Students will be required to attempt five questions taking at least two from each part.

(23)

23 PHY - 101 PHYSICS - I

B. Tech. Semester - I (Common for all Branches)

Duration of Examination : 3 Hours Part - A

PHYSICAL OPTICS

Interference: Division of wave front-Fresnel's biprism, Division of amplitude – Newton's rings, Michelson interferometer, applications.

Diffraction: Difference between Fraunhofer and Fresnel diffraction. Fraunhofer diffraction through a slit. Plane transmission diffraction grating, its dispersive and resolving powers.

Polarization : Polarised and unpolarized light, double refraction; Nicol prism, quarter and half wave plates,Polarimetry; Biquartz and Laurent's half-shade polarimeters, Simple concepts of photoelasticity.

LASER: Spontaneous and stimulated emissions, Laser action, characteristics of laser beam-concepts of coherence, He-Ne and semiconductor lasers (simple ideas), applications.

FIBRE OPTICS: Propagation of light in fibres, numerical aperture, single mode and multi mode fibres, applications. Part - B

WAVE AND OSCILLATIONS: Simple concepts of Harmonic Oscillator, resonance, quality factor.

E.M. wave theory-review of basic ideas, Maxwell's equations, simple plane wave equations, simple concepts of wave guides and co-axial cables, Poynting vector.

DIELECTRICS: Molecular theory, polarization, displacement,susceptibility, dielectric coefficient, permitivity & various relations between these, Gauss's law in the presence of a dielectric, Energy stored in an electric field. Behaviour of dielectrics in a.c. field-simple concepts, dielectric losses.

SPECIAL THEORY OF RELATIVITY: Michelson-Moreley experiment, Lorentz transformations, variation of mass with velocity, mass energy equivalence.

NUCLEAR PHYSICS: Neutron Cross-section, Nuclear fission, Moderators, Nuclear reactors, Reactor criticality, Nuclear fusion. Interaction of radiation with matter-basic concepts, radiation detectors-ionisation chamber, G.M. Counter, Scintillation and solid state detectors, cloud chamber and bubble chamber.

TEXT BOOKS:

1. Physics of the Atom - Wehr, Richards & Adair (Narosa) 2. Perspectives of Modern Physics - Arthur Beiser (TMH) 3. Modern Engineering Physics – A.S. Vasudeva (S. Chand) REFERENCE BOOKS :

1. Electricity and Magnetism – F.W. Sears (Narosa) 2. Physics Vol-I & II – Resnick & Halliday (Wiley Eastern) 3. A Text Book of Optics – Brij Lal & Subramanyam

Note: The Examiners will set eight questions, taking four from each part. The students will be required to attempt five questions in all selecting at least two from each part. All questions will carry equal marks.

(24)

24 CH - 101

CHEMISTRY

B. Tech. Semester – I/II (Common for all Branches)

Unit-1: Thermodynamics - Second law, concept of Entropy, Entropy change for an ideal gas, free energy and work functions, Free energy change, Chemical Potential, Gibb's Helmholtz equation, Clausius - Clapeyron equation, Related numerical problems with above topics.

Unit-2: Phase-Rule - Terminology, Derivation of Gibb's Phase Rule Equation, One Component System (H2O System),

Two Components systems, Eutectic system (Pb-Ag), system with congruent m.pt. (Zn-Mg), systems with incongruent m.pt. (Na-K), Applications of above Systems.

Unit-3: Water & its treatment : Part I – Sources of water, impurities in water, hardness of water and its determination, units of hardness, alkalinity of water and its determination, Related numerical problems, scale and sludge formation (composition properties and methods of prevention).

Unit-4: Water and its treatment : Part II – Treatment of water for domestic use, coagulation, sedimentation, filtration and dis-infection, water softening, ion-exchange process, mixed bed demineralisation, Desalination (reverse osmosis) (electrodialysis).

Unit-5: Corrosion and its prevention - Galvanic & concentration cell, Dry and wet corrosion, Electrochemical theory of corrosion, Galvanic corrosion, pitting corrosion, water-line corrosion, differential aeration corrosion, stress corrosion, factors affecting corrosion, Preventive measures (proper design, Cathodic protection, protective coatings).

Unit-6: Lubrication and Lubricants - Friction, mechanism of lubrication, classification and properties of lubricants, Additives for lubricants, synthetic lubricants, Greases – Preparation & properties (consistency, drop point) and uses.

Unit-7: Polymers and Polymerization - Organic polymers, polymerisation, various types of polymerisation, effect of structure on properties of polymers, preparation properties and technical applications of thermo-plastics (PVC, PVA), thermosets (PF,UF), & elastomers (SBR,GR-N), Silicones, Introduction to polymeric compsites.

Unit-8: Analytical Methods - Thermal methods, Principle, method and application of Thermogravimetric analysis, Differential thermal analysis and Differential scanning calorimetry , (Experimental details are excluded),Spectroscopic methods, Spectrophotometry, interaction of E.M. radiations with a molecule and origin of spectrum, spectroscopic, techniques-vibrational and electronic spectroscopy (Experimental details are excluded), conductometric titration, elementary discussion on Flame-photometry.

TEXT BOOKS:

1. Engineering Chemistry, P.C. Jain, Monica Jain (Dhanpat Rai & Co.).

2. Chemistry in Engineering & Tech., Vol.I & II, Rajaram, Kuriacose (TMH). REFERENCE BOOKS:

1. Instrumental methods of Chemical Analysis, MERITT & WILLARD East-West Press). 2. Physical Chemistry, P.W. Atkin (ELBS, Oxford Press).

3. Physical Chemistry, W.J. Moore (Orient-Longman).

Note: Eight questions are to be set with a fair weightage of all the units. The candidates will be required to attempt five questions in all.

(25)

25 CSE - 101

FUNDAMENTALS OF COMPUTER & PROGRAMMING IN C

B. Tech. Semester – I/II (Common for all Branches)

3 -- -- 3 Examination : 100 Marks

Unit-1: An Overview of Computer System: Anatomy of a digital Computer, Memory Units, Main and Auxiliary Storage Devices, Input Devices, Output Devices, Classification of Computers.

Radix number system: Decimal, Binary, Octal, Hexadecimal numbers and their inter-conversions; Representation of information inside the computers.

Unit-2: Operating System Basics: The user Interface, Running Programmes, Managing files, Introduction to PC operating Systems: Unix/Linux , DOS, Windows 2000.

Unit-3: Internet basics: : Introduction to the basic concepts of Networks and Data Communications, How Internet works, Major features of internet, Emails, FTP, Using the internet.

Unit-4: Programming Languages: Machine-, Assembly-, High Level- Language, Assembler, Compiler, Interpreter, debuggers, Programming fundamentals: problem definition, algorithms, flow charts and their symbols, introduction to compiler, interpreter, assembler, linker and loader and their inter relationship.

Unit-5: C Programming language: C fundamentals, formatted input/ output, expressions, selection statements, loops and their applications; Basic types, arrays, functions, including recursive functions, program organization: local and external variables and scope; pointers & arrays.

Unit-6: Strings: strings literals, string variables, I/O of strings, arrays of strings; applications. Preprocessor: preprocessor directives, macro definition, conditional compilation; Structures, Unions and Enumerations: Structure variables and operations on structures; Structured types, nested array structures; unions; enumeration as integers, tags and types.

Declaration: Declaration syntax, storage classes, types qualifiers, declarators, initializers.

Program Design: modules, information hiding, abstract data types, difference between C & C++, Low level programming: Bitwise operators, Bit fields in structures, other low level techniques.

Unit-7: Standard library: Input / output; streams, file operations, formatted I/O, character I/O, line I/O, block, string I/O, Library support for numbers and character data, error handling:

TEXT BOOKS:

1. Using Information Technology, 5th_{Edi, Brian K Williams & Stacey C. Sawyer, 2003, TMH}

2. The C Programming Language by Dennis M Ritchie, Brian W. Kernigham, 1988, PHI. 3. C Programming – A modern approach by K.N. King, 1996, WW Norton & Co. REFERENCE BOOKS:

1. Information technology, Dennis P. Curtin, Kim Foley, Kunal Sen, Cathleen Morin, 1998, TMH 2. Theory and problem of programming with C, Byron C Gottfried, TMH

3. Teach yourself all about computers by Barry Press and Marcia Press, 2000, IDG Books India. 4. Using Computers and Information by Jack B. Rochester, 1996, Que Education & Training.

Note: Eight questions will be set by the examiner (at least 2 questions from unit-1 to 4, 2 each from unit –5 & 6, and one from unit-7). The students will be required to attempt 5 questions in all.

(26)

26 EE - 101

ELECTRICAL TECHNOLOGY

B. Tech. Semester – I/II (Common for all Branches)

Duration of Examination : 3 Hours Unit-I: D.C. CIRCUITS: Ohm’s Law, Kirchoff’s Laws, D.C. Circuits, Nodal and Loop methods of analysis.

Unit-II: a) A.C. CIRCUITS: Sinusoidal signal, instantaneous and peak values, RMS and average values, phase angle, polar & rectangular, exponential and trigonometric representations; R,L and C components, behaviors of these components in A.C. circuits. Concept of complex power, power factor.

b) TRANSIENT RESPONSE: Transient response of RL, RC and RLC Circuits with step input.

Unit- III: NETWORK THEOREMS: Thevenin’s theorem, Norton’s theorem, superposition theorem, maximum power transfer theorem, Reciprocity theorem, Tellegen’s theorem, Milman's theorem. Star to Delta & Delta to Star transformation.

Unit-IV: SERIES AND PARALLEL A.C. CIRCUITS: Series and parallel A.C. circuits, series and parallel resonance, Q factor, cut-off frequencies and bandwidth.

Unit-V: THREE PHASE CIRCUITS: Phase and line voltages and currents, balanced star and delta circuits, power equation, measurement of power by two wattmeter method, Importance of earthing.

Unit-VI: TRANSFORMERS: Principle, construction & working of transformer, Efficiency and regulation. Unit-VII: ELECTRICAL MACHINES: Introduction to D.C. Machines, Induction motor, Synchronous machines. Unit-VIII: MEASURING INSTRUMENTS: Voltmeter, Ammeter, Watt meter, Energy meter.

TEXT BOOKS:

1. Basic Electrical Engg (2nd Edition) : Kothari & Nagarath, TMH 2. Electrical Technology (Vol-I) : B.L Theraja & A K Theraja, S.Chand REFERENCE BOOKS:

1. Electrical Engineering Fundamentals: Deltoro, PHI 2. Network Analysis: Valkenburg, PHI

Note: Eight questions are to be set in all by the examiner taking at least one question from each unit. Students will be required to attempt five questions in all.

(27)

27 ME - 101

ELEMENTS OF MECHANICAL ENGINEERING

B. Tech. Semester – I/II (Common for all Branches)

3 1 -- 4 Examination : 100Marks

Unit-I: Properties of Steam & Boilers: Formation of steam at constant pressure, Thermodynamics properties of steam, Condition of steam, Steam tables, Measurement of dryness fraction by throttling calorimeter, Classification of boilers, Comparison of water and fire tube boilers mounting and accessories with their functions, Constructional and operational details of Cochran and Babcock and Wilcox boilers, Problems.

Unit-II: Steam Turbines and Condensers: Classification of turbines, Working principle of impulse and reaction turbine, Compounding of impulse turbine, Comparison of impulse and reaction turbines, Types of condensers, Cooling ponds and cooling towers, Condenser and vacuum efficiencies.

Unit-III: I.C. Engines and Gas Turbines: Introduction, Classification, Constructional details and working of two-stroke and four-stroke diesel and petrol engines, Otto, Diesel and Dual cycles, Working principle of gas turbine, Constant pressure gas turbine cycle.

Unit-IV: Water Turbines, Pumps and Hydraulic Devices: Introduction, Classification, Construction details and working of Pelton, Francis and Kaplan turbines, Specific speed and selection of turbines, Classification of water pumps and their working, Hydraulic jack and lift.

Unit-V: Simple Lifting Machines: Definition of machine, Velocity ratio, Mechanical advantage, Efficiency, Laws of machines, Reversibility of machine, Wheel and axle, Differential pulley block, Single, double and triple start worm and worm wheel, Single and double purchase winch crabs, Simple and compound screw jacks. Problems.

Unit-VI: Power Transmission Methods and Devices: Introduction to Power transmission, Belt drive, Rope drive, Chain drive, Pulley, Gear drive, Types of gears, Gear train, Clutches, Types and function of clutches, Types and function of brakes, Power measurement by dynamometer, Types of dynamometers.

Unit-VII: Stresses and Strains: Introduction, Concept & types of Stresses and strains, Poison’s ratio, stresses and strains in simple and compound bars under axial loading, Stress-strain diagrams, Hooks law, Elastic constants & their relationships, Principle stresses & strains and principal- planes, Mohr’s circle of stresses. Numerical problems. Unit-VIII: Bending Moment & Shear Force: Definitions, SF and BM diagrams for cantilever and simply supported

beam. Calculation of maximum SF, BM and point of contra-flexure under the loads of (i) concentrated load (ii) uniformly distributed load (iii) combination of concentrated and uniformly distributed loads. Problems. TEXT BOOKS:

1. Strength of Materials - G.H. Ryder, Pub.- ELBS.

2. Hydraulic and Fluid Mechanics – Modi and Seth, Pub. – Standard Book House, New Delhi 3. Engineering Thermodynamics – C.P. Arora, Pub. - TMH, New Delhi

4. Thermal Engineering – A.S. Sarad, Pub. - Satya Prakashan, New Delhi. 5. Engineering Mechanics – K.L. Kumar, Pub. - TMH, New Delhi. 6. Theory of Machines – S.S. Rattan, Pub. – TMH, New Delhi. REFERENCE BOOKS:

1. Strength of Materials – Popov, Pub. - PHI, New Delhi.

2. Hydraulic Machines – Jagdish Lal, Pub.- Metropolitan, Allahbad.

3. Thermal Science and Engineering – D.S. Kumar, Pub. – Kateria & Sons, New Delhi.

Note: In the semester examination, the examiner will set eight questions, at least one question from each unit. The students will be required to attend only 5 questions.