Curriculum our competence development program

(1)

Curriculum –

our competence development program

Well-trained employees are vital for successful companies. Challenges such as the rapid

transformation of economic, environmental and technological advancements require

employees to contiguously and systematical improve skills and knowledge. To be a reliable

resource and realize our potential, we all must take a personal stake in planning

develop-ment activities that will contribute to our personal and organization’s success.

> 5 years > 2 years > 1 year Professional experience

Qualification levels

Associate level Advanced level Expert level Knowledge: Fundamental knowledge about the competence area topic.

Practical experience: > 1 year project experience in a position at least equal to that of project engineer.

Skills:

Perform specific technical tasks under supervision as part of their professional routine.

Knowledge:

Extended knowledge and professional experience for independently performing tasks in the competence area.

Practical experience: > 2 years project experience in a position at least equal to that of project engineer.

Skills:

Independently perform tasks as part of their profes-sional routine, and devel-oping required solutions themselves.

Knowledge:

Extended knowledge and professional experience for independently performing complex tasks based on comprehensive professional experience.

Practical experience:

> 5 years project experience in a position at least equal to that of project engineer or technical lead.

Skills:

Independently perform complex tasks as part of their professional routine, and also able to communi-cate complex relationships and solutions to project engineers in the function of technical lead.

To help you and your organization in this

effort, Siemens Power Academy TD has

designed a competency-based

develop-ment program to guide your learning plan.

In contrast to simply selecting individual

training seminars, our curriculum provides

you with incremental learning through a

structured, logical combination of classes

on a specific topic. This allows the

neces-sary skills and abilities to be systematically

developed.

Each curriculum consists of a progressive

set of classes with three qualification

levels: Associate, Advanced, and Expert.

Each level concludes with a learning

assessment to ensure that the training

was successful.

We offer you a wide variety of curricula

including Protection Systems, Substation

Automation, Power Systems Technology,

Distribution Systems Technology, and

PSS® Network Planning and Analysis.

Please visit our website for an overview

of our selection of curricula:

(2)

How to obtain certification

Step 1

Selection of the required curriculum and qualification level

Q

Students and supervisors review and select the curriculum content and define the required qualification

level. Siemens Power Academy TD is happy to assist with this process.

Q

Now you are ready to choose your classes. To register for a class, please visit

www.siemens.com/poweracademy or contact your regional training center for assistance in booking

your training.

Step 2

Participation in training

Q

Students attend all required classes.

Q

The order of courses within a qualification level is a recommendation only, and can be altered by the trainee.

Step 3

Testing

Q

Students register for and complete all tests for the selected level of the required curriculum

Q

The test can be completed online.

Q

Students taking the web-based e-test have to reach the minimum achievement levels of each certification

program to pass the test. The qualification certificate can be printed out after the e-test.

Q

If the student is not able to achieve the required passing grade on their first attempt, they can contact

their regional training center to re-test or re-take the course.

Step 4

Certification

Q

Once the student has completed the requirements for the certification, complete the certificate application

form for a final evaluation. Siemens Power Academy TD staff members are available to assist.

Q

If all the criteria for the curriculum certification have been met, Siemens Power Academy TD issues

the certificate. Product and software-based certifications are valid for a specified period of time before

refresher courses are required for certification maintenance.

13

Our curricula

l

SICAM PAS Substation Automation

l

SICAM RTUs Substation Automation

l

SICAM 230 SCADA

l

SIPROTEC Bay Controller

l

SIPROTEC Protection – Service Power Transmission & Distribution

(commissioning, operation, testing, maintenance)

l

SIPROTEC Protection – Service Power Generation and Industry

(commissioning, operation, testing, maintenance)

l

SIPROTEC Protection – Planning Power Transmission & Distribution

(planning, engineering, fault analysis)

l

SIPROTEC Protection – Planning Power Generation and Industry

(planning, engineering, fault analysis)

(3)

Associate Advanced Expert Recommended Web Based Training e-test Courses can be ordered at: www.siemens.com/poweracademy

Curriculum

SICAM PAS Substation Automation (CU-PASE)

DIGSI 4/5–

IEC 61850 and GOOSE Configuration SICAM SCC –

Configuring an Operator Station Cyber Security –

Awareness

DIGSI 4 – Basics

igu

Booking code DIGSI4-I/DIGSI5-I fig ng Ope

Booking code g c PAS-S

e-test WT-PASC

Booking code CS-AW

Booking code DIGSI4-B SICAM PAS –

Basics SICAM PAS – Parameterization

Associate

Booking code g c PAS-B

e-test WT-PASB

Booking code PAS-P

Booking code

e-test WT-PASP

SICAM PAS –

Automation with CFC, ST and SFC IT Networks Part 2 –

Automation Practice

C,

Booking code PAS-C

Booking code SIT-NETW2 IT Networks Part 1 –

Principles

IT Security Part 1 – Principles

Principles

Booking code SIT-NETW1 ple

Booking code SIT-SECUR1 Boo g code e-test WT-SECUR1 Boo g code e-test WT-PASC Booking code e-test WT-NETW1 g c e-test WT-DIGSI4I/WT-DIGSI5I Advanced SICAM PAS –

System Diagnosis and Trouble Shooting IT Advanced Cyber Security – Router Workshop

IT Security Part 2 – Automation Practice

IT Networks Part 2 – Automation Practice

System Diagnosis and Trouble Shooting Booking code PAS-SYS

hop

Booking code SIT-NETW3

Booking code SIT-SECUR2

Booking code SIT-NETW2 g c e-test WT-PASSYS Boo g code e-test WT-NETW3 Booking code e-test WT-SECUR2 Boo g code e-test WT-NETW2 Expert

(4)

SICAM RTUs Workshop –

Configuration IEC 60870-5-101/104 Interface SICAM RTUs – Engineering DIGSI 4 – Basics

Booking code RTU-IEC104 Booking code g c RTU-ENG

e-test WT-RTUENG

Booking code DIGSI4-B

SICAM RTUs – Service SICAM RTUs – Basics SICAM RTUs – CAEx Plus Associate

Booking code RTU-SERVIC

Booking code RTU-BASIC Boo g code

e-test WT-RTUSER

g c

e-test WT-RTUBAS

Booking code RTU-CAEX Booking code

e-test WT-RTUCAEX

SICAM RTUs Workshop – Configuration IEC 61850 Interface

DIGSI 4/5 –

IEC 61850 and GOOSE Configuration fig

Booking code RTU-IEC61

IEC 61850 and GOOSE Configuration Booking code DIGSI4-I/DIGSI5-I IT Networks Part 1 –

Principles

SICAM RTUs Workshop – Configuration Profibus & Modbus Interfaces

Principles

Booking code SIT-NETW1

Booking code RTU-MODBUS Booking code e-test WT-NETW1 Booking code e-test WT-IEC104 Boo g code e-test WT-IEC61 g c e-test WT-DIGSI4I/WT-DIGSI5I Advanced

IT Advanced Cyber Security – Router Workshop IT Security Part 2 – Automation Practice IT Networks Part 2 – Automation Practice hop

Booking code SIT-SECUR2 Booking code SIT-NETW2 Boo g code e-test WT-NETW3 Booking code e-test WT-SECUR2 g c e-test WT-NETW2 Expert

SICAM RTUs Substation Automation (CU-RTUE)

Cyber Security – Awareness

Booking code CS-AW

IT Security Part 1 – Principlesple

Booking code SIT-SECUR1 Boo g code

e-test WT-SECUR1

(5)

Curriculum

SICAM 230 SCADA (CU-230E)

SICAM 230 Workshop – Topology

SICAM 230 –

Configuration (latest version)

SICAM RTUs –

Basics Topology

Booking code 230-TOP

fig n ( on)

Booking code g c 230-CONFI

e-test WT-230CONF

Booking code RTU-BASIC SICAM TOOLBOX II –

Basics

Associate

Booking code g c TOOLBOX

e-test WT-TOOLBOX

IEC 61850 –

The Standard for Substation Automation Booking code SIT-IEC IT Networks –

Automation

Booking code SIT-NETW2 Advanced

SICAM 230 Workshop – Network Monitoring with SICAM 230 NWM

Booking code g c 230-MONIT

e-test WT-230MONI

Expert

IT Security Part 1 – Principles

Principles

Booking code g c SIT-SECUR1

IT Networks Part 1 – Principlesple

Booking code SIT-NETW1 Boo g code

e-test WT-NETW1

IT Advanced Cyber Security – Router Workshophop

Booking code SIT-NETW3 Boo g code

e-test WT-NETW3

Booking code g c SIT-SECUR2

(6)

SIPROTEC Bay Controller (CU-BAYE)

DIGSI 4/5 – Basics DIGSI 5 – Systems

Associate

Booking code DIGSI4-B/DIGSI5-B Systems

Booking code DIGSI5-S

Booking code

e-test WT-DIGSI4B/WT-DIGSI5B g c

e-test WT-DIGSI5S

SIPROTEC –

Compact Distribution Network Automation with 7SC80 and FASE Booking code SIPC-7SC-I

Advanced

DIGSI 4/5 – CFC

Booking code DIGSI4-C/DIGSI5-C Boo g code

e-test WT-DIGSI4C/DIGSI5C Expert

IT Security Part 1 – Principlesple

IT Networks Part 1 – Principles

Principles

Booking code g c SIT-NETW1

DIGSI 4/5–

IEC 61850 and GOOSE Configuration IEC 61850 and GOOSE Configuration Booking code DIGSI4-I/DIGSI5-I Booking code

e-test WT-DIGSI4I/WT-DIGSI5I

Booking code g c SIT-NETW2

SICAM PAS –

System Diagnosis and Trouble Shooting System Diagnosis and Trouble Shooting Booking code PAS-SYS Booking code

e-test WT-PASSYS

(7)

Curriculum

SIPROTEC Protection – Service Power Transmission & Distribution

(commissioning, operation, testing, maintenance) (CU-SIPTDCE)

Transmission and Distribution Networks – Basics Part I

SIPROTEC 4/5 – Secondary Testing

with OMICRON Test System CMC

SIPROTEC 5 – Overcurrent and

Motor Protection 7SJ & 7SK SIPROTEC 4/5 –

Application and Exercises

Booking code PE-TDNET1

Booking code SIP4-CMC

Booking code SIP5-7SJSK App

Booking code SIP4-SYS/SIP5-SYS Boo g code

e-test WT-SIP4SYS/SIP5SYS

Protection Technology – Principles

Associate

Booking code PR-PRIN Booking code

e-test WT-PRPRIN

Protection Systems – Accessory Equipment

SIPROTEC 4 –

Overcurrent and Motor Protection 7SJ

SIPROTEC 4/5 –

Busbar Protection 7SS52/7SS85

SIGRA 4 –

Efficient Interpretation of Fault Records Accessory Equipment

Booking code SIP4-ACCES

Booking code SIP4-7SJ

Booking code SIP4-7SS/SIP5-7SS85

Booking code SIP4-SIGRA Current and Voltage Transformers –

Intensive Course DIGSI 4/5 –

IEC 61850 and GOOSE Configuration

Booking code SIP-VTI igu

Booking code DIGSI4-I/DIGSI5-I Boo g code e-test WT-DIGSI4I/WT-DIGSI5I g c e-test WT-SIP4ACC Booking code e-test WT-SIP4CMC Booking code e-test WT-SIP57SJSK Advanced SIPROTEC 4 –

Line Differential Protection 7SD

SIPROTEC 4/5 –

Transformer Differential Protection 7UT

SIPROTEC 4/5 – Distance Protection 7SA/

Distance & Line Differential Protection 7SL Booking code SIP4-7SD

Booking code SIP4-7UT/SIP5-7UT

Booking code SIP4-7SA/SIP5-7SL g c e-test WT-SIP47SD Boo g code e-test WT-SIP47SS/SIP57SS85 Booking code e-test WT-SIP47UT/SIP57UT Booking code e-test WT-SIP47SA/WT-SIP57SL Expert DIGSI 5 – Systems Systems

Booking code g c DIGSI5-S

DIGSI 4 – Advanced

Booking code DIGSI4-A Booking code

e-test WT-DIGSI4A

DIGSI 4/5 – Basics

Booking code DIGSI4-B/DIGSI5-B Booking code

(8)

SIPROTEC Protection – Service Power Generation and Industry

(commissioning, operation, testing, maintenance) (CU-SIPGICE)

SIPROTEC 4/5 – Secondary Testing

with OMICRON Test System CMC

SIPROTEC 5 – Overcurrent and

Motor Protection 7SJ & 7SK SIPROTEC 4/5 –

Application and Exercises

Booking code PE-TDNET1

Booking code SIP4-CMC

Booking code SIP5-7SJSK App

e-test WT-SIP4SYS/SIP5SYS

Associate

Booking code PR-PRIN Boo g code

Protection Systems – Accessory Equipment

SIPROTEC 4 –

SIPROTEC 4/5 –

Busbar Protection 7SS52/7SS85 SIPROTEC 4 –

Distance Protection 7SA

SIPROTEC 4 –

Line Differential Protection 7SD

SIPROTEC 4 –

SIGRA 4 –

Efficient Interpretation of Fault Records Accessory Equipment

Booking code SIP4-ACCES

Booking code SIP4-7SS/SIP5-7SS85 Booking code SIP4-7SA

Booking code SIP4-7SD

Booking code SIP4-SIGRA Current and Voltage Transformers –

Intensive Course DIGSI 4/5 –

IEC 61850 and GOOSE Configuration

Booking code SIP-VTI igu

Booking code DIGSI4-I/DIGSI5-I Boo g code e-test WT-DIGSI4I/WT-DIGSI5I g c e-test WT-SIP4ACC Boo g code e-test WT-SIP4CMC Boo g code e-test WT-SIP57SJSK Advanced SIPROTEC 4 –

Machine/Motor Protection 7UM & 7VE

SIPROTEC 4/5 –

Transformer Differential Protection 7UT SIPROTEC 5 –

Distance & Line Differential Protection 7SL

Booking code SIP4-7UMVE

Booking code SIP4-7UT/SIP5-7UT Booking code SIP5-7SL Booking code e-test WT-SIP47SS/SIP57SS85 Boo g code e-test WT-7UMVE Boo g code e-test WT-SIP47UT/SIP57UT Boo g code e-test WT-SIP57SL Expert DIGSI 5 – Systems Systems

Booking code g c DIGSI5-S

DIGSI 4 – Advanced

Booking code DIGSI4-A Booking code

e-test WT-DIGSI4A

DIGSI 4/5 – Basics

Booking code DIGSI4-B/DIGSI5-B Boo g code

e-test WT-DIGSI4B/WT-DIGSI5B

(9)

Curriculum

SIPROTEC Protection – Planning Power Transmission & Distribution

(planning, engineering, fault analysis) (CU-SIPTDPE)

Transmission and Distribution Networks – Basics Part II

Current and Voltage Transformers – Intensive Course

SIPROTEC – Guided Exercises

Booking code PE-TDNET2

Booking code PE-TDNET1

Booking code SIP-VTI Booking code WS-GUIDE

Associate

Principles

Booking code g c PR-PRIN

SIGRA 4 –

Efficient Interpretation of Fault Records Dynamic Network –

Phenomena, Simulation and Analysis

Booking code SIP4-SIGRA Booking code NET-DYNAM DIGSI 4 –

CFC

Transmission System Protection – Schemes and Settings Calculation Practice

Booking code DIGSI4-C Booking code PR-DSPS Boo g code e-test WT-PRDSPS g c e-test WT-SIPVTI Advanced

Transmission System Protection – Schemes and Setting Calculation Practice – Intensive

System Protection – Workshop on a Real Time Digital Simulator RTDS Communication Networks –

Application in Substations

Booking code PR-DSPSI Booking code RTDS-PS App

Booking code SIT-COMSUB

Boo g code e-test WT-PRDSPSI Boo g code e-test WT-RTDSPS Boo g code e-test WT-SITCOMS Expert SIPROTEC 4/5 – Application and Exercises

Booking code SIP4-SYS/SIP5-SYS Boo g code

e-test WT-SIP4SYS/SIP5SYS DIGSI 4/5 –

Basics

Booking code DIGSI4-B/DIGSI5-B Boo g code

e-test WT-DIGSI4B/WT-DIGSI5B

(10)

SIPROTEC Protection – Planning Power Generation and Industry

(planning, engineering, fault analysis) (CU-SIPGIPE)

Transmission and Distribution Networks – Basics Part II

Current and Voltage Transformers – Intensive Course

SIPROTEC – Guided Exercises

Booking code PE-TDNET2

Booking code PE-TDNET1

Booking code SIP-VTI Booking code WS-GUIDE

Associate

Principles

Booking code PR-PRIN Booking code

Dynamic Network –

Phenomena, Simulation and Analysis

SIGRA 4 –

Efficient Interpretation of Fault Records Booking code NET-DYNAM

Booking code SIP4-SIGRA DIGSI 4 –

CFC

Transmission System Protection – Schemes and Settings Calculation Practice

Booking code DIGSI4-C Booking code PR-DSPS Boo g code e-test WT-PRDSPS Booking code e-test WT-SIPVTI Advanced

Generator/Dynamics and Protection – Workshop on a Real Time

Digital Simulator RTDS

Generator/Motor Protection – Design & Settings

Communication Networks – Application in Substations

Booking code RTDS-GEN

Design & Settings

Booking code PR-DSMP App

Booking code SIT-COMSUB

Boo g code e-test WT-RTDSGEN g c e-test WT-PRDSMP Boo g code e-test WT-SITCOMS Expert SIPROTEC 4/5 – Application and Exercises

e-test WT-SIP4SYS/SIP5SYS DIGSI 4/5 –

Basics

Booking code g c DIGSI4-B/DIGSI5-B e-test WT-DIGSI4B/WT-DIGSI5B