Mk5 Speci5

(1)

Elektronikon® Mk5

User Guide Mk5 Speci5

Name _{Elektronikon® systems} Serc. Class

Detail _{Mk5 Speci5} _{1102 K/1}

Detail _PCOwner

Edition: 03 Modified from Print date _AII

16/02/2010

Family Written by Compare Replaces Designation

CTE- RVDS 02

Design checked. Production checked. Approved Date

16/02/2010

(2)

Document version history

Version Description

00 First release

01 New functionalities added to the program (service report in Excel and XML) 02 New screens are added to the document (chapter 4.1.2, 4.1.3 and 4.1.4)

03 Program settings screen is changed, Mk4 mapping is changed and called Address mapping, generation combo box is bigger and can contains more info, download file can be filtered.

(3)

1 Preface and General description

This technical user guide can help you with the download of Elektronikon MK5 controllers.

In general the “Speci5” program has following main functions:

•

Download to controller

•

Download to file

•

Upload from controller

•

Programming Counters

In order to use this program a licence key is necessary. This licence key can be downloaded from the “Atlas Copco software market database” in lotus notes.

The first time you run the program, a dialog box appears, and asks for a program licence key. Fill in the key, click “ok” to confirm and start the program, or click “cancel” to quit the program.

After entering a correct key a new dialog opens, the expiration date is shown.

When a wrong licence key is filled in, Speci5 shows the following dialog.

(5)

2 Preparation

Before using this program the network connection needs to be configured properly. Follow these steps:

Go to network places

Click “View Network connections”

Select the Local Area connection, which is connected to the controller.

(6)

Click with the right button and select properties

Select Internet Protocol (TCP/IP) Click on the properties button

Important!!!

Only the TCP/IP protocol must be selected for this connection. When other protocols are selected, the communication to the controller might fail.

Use the following settings:

•

IP Address 192.168.100.200

•

Subnetmask 255.255.255.0

•

Click “ok” and close Network

(7)

3 Splashscreen and Program settings Screen

At program start-up, a splash screen appears and automatically disappears once all the program components and the database(s) are loaded.

Overview Speci5 Program Settings screen

(8)

4 Tab Pages

The mainscreen contains 5 tab pages:

1. Download.

2. Upload.

3. Program Settings.

4. Tools.

5. Info.

4.1 Tab: Download

4.1.1 Sub Tab: Download - Configuration

4.1.1.1 Group Box Machine

Is used to configure the machine settings.

Model: The list contains all models of the loaded database(s).

Generation: List containing all available generations of the selected model. This combo box is rebuild and is the same width then the main screen Serial Number: Machine serial number

Web Link button : retrieve machine configuration data from ServiceConnect. Only possible when machine was downloaded at Airpower production facilities.

GUID: is a unique identifier assigned to the downloaded controller. Controller: target Mk5 controller for the selected configuration Info: information about the selected model + generation Family: Product Family of the selected model + generation

4.1.1.2 Group Box: Display configuration.

3 main languages can be selected (+ guaranteed languages!).

Use the Units button to modify the basic units for the controller, after changing, press “ok” to confirm and close this screen.

(9)

4.1.1.3 Group Box Info Text

By default the Atlas Copco URL is shown in the Information screen of Graphic or Graphic+ controllers. If necessary this information text can be changed, e.g. by local production facilities.

Info Texts are stored in Info_Core.ic5 in the Windows directory and consist of 4 lines of text. Click on the button Info core maker to manage the Info Core.

(10)

Click on the button “Add”

A new dialog opens; fill in a text information name and click “Ok” to save the name. This name is afterwards shown in the list of the info text group box.

To add new text to the info text dialog; Select the new name in the Info core Maker dialog. The text lines are now active, fill in the information you want to display on the Information screen.

Click on the save button, this new information is added to the info_core.ic5 file in the windows directory.

If a text is too long, the background color of the text box changes to pink. The maximum text length is 310 pixels per line of text.

(11)

The changes made in Speci5 are visible in the information screen of the controller. Starting from the main screen:

Press the enter button on the controller and go to the information icon.

Press enter to view the information.

4.1.1.4 Group Box Parameter Configuration

Choose the proper configuration selections from the list boxes.

The 3 buttons below this screen have the following functions:

• Download to controller: downloads the selected configuration to the connected controller. • Download to file: downloads the selected configuration to a .cs5 file.

• Mk4 Mapping: creates Modbus and Profibus mappings for the selected configuration. To be used when connecting Mk5 controller to Mk4 Combox-S (Modbus) or Combox-P (Profibus) interface.

(12)

Mk4 Mapping example:

4.1.2 Sub Tab: Download - File

This screen shows a list of all cs5 files and their download configuration and information.

Below this screen is a new option “Filter field” Is used for: filtering files to file name.

4.1.3 Sub Tab: Download - Licences

ES6 and ES6i functionality are protected by a specific licence.

Use the button Download Licence to controller to search for a valid ES4i or ES6i licence and click download to controller

(13)

4.1.4 Sub Tab: Download - Counters

Clicking Download Counters shows a dialog with the current controller counter values and

allows you to program new counter values.

After changing the values in the New Value column and clicking “ok” the new counter

values will be downloaded to the controller. Cancel closes the dialog.

(14)

Counter values can be saved to file (

explained chapter 4.2

) and can later on be loaded again in

the Program Counters dialog with the button “Load Counters from file”

(15)

4.2 Tab: Upload

Use the button Controller to save the total configuration of the connected controller in a .cs5 file.

Use the button Counters to save the counter values of the connected controller in a .cnt file.

Address Mapping creates Modbus and Profibus

mappings for the connected controller (see 4.1.1.4)

The button Address mapping can also be found in the following pages:

• configuration • File

Button Service Report Excel:

This button exports the current status and values of the connected controller to an Excel file. In this report:

1. Machine passport 2. Controller history

3. Machine info (Machine state + Motors VSD)

4. Counter values 5. I/O values

Button Service Report XML: Similar, but export to an xml file

4.3 Tab: Program settings

4.3.1 Group Box DB Settings

New in Mk5: multiple databases can be loaded in Speci5. e.g. AII GA & AII Z

However, it’s not possible to load more than 1 version of the same database. e.g. AII GA v1 & AII GA v2

(16)

A new button is placed below remove DB (DB Info)

After clicking on this button a new screen opens.

4.3.2 Group box IP Settings

If no network card is selected, click on the button "Network Card" a new dialog appears. Select the correct network card from the list and click on the "Ok" button.

(17)

4.3.3 Group Box Download options

Downloading of the Operating System can be forced checking Always download OS. When left unchecked, download of the OS will only occur when necessary.

Guaranteed languages are always downloaded and the list can be easily modified by clicking

Use the checkbox before each language to add more languages.

If desired you can check all languages by selecting all in top of this screen, or deselecting all.

Click “Ok” to confirm.

(18)

4.3.4 Group Box Service Report Units

Units for values in generated Excel

Service Reports.

4.4 Tab: Tools

4.4.1 Sub Tab: Boot To run

(19)

4.4.2 Sub Tab: Remote Control

Following digital inputs are by default factory disabled :

•

Remote Start/Stop

•

Remote Load/Unload

•

Remote Pressure Sensing

Click on the button “Activate”, to activate one of the digital inputs. Click on the button

"Download To Controller" to save the changes.

If one of the digital inputs is active this will light up in a green color.

To deactivate this digital input click on the "Deactivate" button to change this setting, and click on the button “download to controller”.

A dialog opens en shows the download to the controller.

(20)

4.4.3 Sub Tab: Info text

The Information screen text of the connected controller can be changed by clicking the button

“Change Info Text On Controller”

Choose the proper Info Text from the list. A preview is shown on the right side. Click “Ok” to confirm or “Cancel” to quit.

Speci5 is downloading the new Info Text.

When the download is completed a new dialog opens (Download Succeeded) Click “Ok” To close this dialog.

(21)

4.5 Tab: Info

This tab page shows the version number of this program and the release date. Click on the button Show Manual to open the help file.

When the licence is expired a new one can be entered with the "Enter new License" button. For more information see Chapter 1

(22)

A new dialog screen opens, fill in the new licenses key and press "ok" to continue or cancel to quit this action.

5 Status bar

Status bar shows the IP address of the controller, which database is in use and the selection criteria for downloading the OS.

If you click on the IP address, a dialog pops up and you will be able to select another controller or change the IP address.

There are two possibilities to add a controller:

• Manually

• Scan (automatically) When more than one controller is shown select the controller and click