Three- Year Limited Warranty
Full text
Related documents
• Response: Confirmation tone is delivered followed by 10 seconds of dial tone.. • Press the
1) Press the up(▲) or down(▼) button to select the Color Tone. 4) Press the up(▲) or down(▼) button to select the Color Tone option. 5) Press the MENU button to save.. 2) Press
If the probe temperature does not appear in the receiver within 5-10 seconds, press and hold [MODE] button in the Receiver unit for 2 seconds to re-enter the RF registration
After replacing the filters press and hold the Auto mode button for 5 seconds to reset the filter indicator.. 9.Power off before removing the
Press and hold the security button on Adapter B for 10 seconds and release it when device LED auto reboots. Press and hold the security button on Adapter A for 2 seconds
Hold the “Photo/Settings” button for 3 seconds to enter programming mode, then momentarily press the “Photo/Settings” button one time to select the ringtone display.. Use the up
In normal time mode, press and hold it for 2 seconds to enter the alarm and pre-alarm setting mode.. Press and hold it for 2 seconds to enter the time
In the current mode, press and hold the Menu button and then use the ▲▼ buttons (9, 4) to select Bluetooth Menu options