• No results found

AUTO MANUAL tNsTRUcTtoN

N/A
N/A
Protected

Academic year: 2020

Share "AUTO MANUAL tNsTRUcTtoN"

Copied!
31
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Table 1Sh utte rENFilm-speedheld in. When you releaseit, the last reading will re-main in the digital display.so iiin \
table 2 to determine lights in +/-EV. Refer to theyour
Table 2information can be found in the material and in technical publications available from the film manufac-turer
Table 4 (EV x- lx conversion table, ISO 100)

References

Related documents

SHIFT Button PAUSE Button TRANSFER Button MESSAGE Button AUTO DIAL/STORE Button AUTO ANSWER/MUTE Button FLASH/RCL Button Jog Dial Display (Liquid Crystal Display)..

• Virtual scan generates simulated point cloud • Supports off-line inspection programming with virtual..

On Off Auto On Off Auto On Off Auto On Off Auto On Off Auto On Off Auto On Off Auto On Off Auto East Wing Fire Zones West Wing South Wing North Wing Annex Garage Basement Boiler

AUTO Function If you select the AUTO button before using the OSD menu, the screen is automatically adjusted to the optimal display state applicable to the current mode,

Temperature sensor: Precision thermistor Data recording Min/Max/Avg readings stored for later recall Auto power off Meter turns off after 10 minutes. Sample rate 0.4 Sec (approx.)

Pressing the AUTO button will automatically optimize the screen to the current display mode. Do you see horizontal

Temperature sensor: Precision thermistor Data recording Min/Max/Avg readings stored for later recall Auto power off Meter turns off after 10 minutes.. Sample rate 0.4 Sec

• Press the AUTO button to automatically adjust your display image to the ideal setting. • Press the AUTO button to automatically adjust your display image to the