• No results found

Lateral Pressures of Fresh Concrete on Wall Formwork under High Rates of Placement

N/A
N/A
Protected

Academic year: 2020

Share "Lateral Pressures of Fresh Concrete on Wall Formwork under High Rates of Placement"

Copied!
133
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Table 3.3  Pressure cell gage factor log
Figure 5.1  Lateral pressure distribution – Foundation Wall #1
Figure 5.2  Lateral pressure distribution – Foundation Wall #2
Figure 5.3  Lateral pressure distribution – Foundation Wall #3
+7

References

Related documents

This paper analyzes the effect of temperature on steel fibers pull-out mechanism from a high strength concrete matrix and its contribution to the residual mechanical behavior of

KEY WORDS: nuclear, waste management, interim storage, high-level waste, concrete structures, high-strength concrete, high temperature, heating rate, thermo-hydro-mechanics,

In the present study, the different admixtures were used to study their individual and combined effects on the resistance of concrete in addition to their

This indicates that, when the loading condition changes from quasi static to low loading rates, the loading rate effect on the early-stage crack velocity is almost three times

• As PP fiber is light in weight is result in more bulk density which reflects more positive effect on concrete strength parameter at high temperature of

To study the effect of elevated temperature as well as aggregate type on the performance of concrete (com- pressive strength, rebound hammer reading and ultra- sonic pulse

In this paper 30 story building with C Shape RC Shear wall at the center in Concrete Frame Structure with fixed support conditions under different type of soil