• No results found

Microstructure and Its Effect to Ultrasonic Velocity of Austenitic Stainless Steel in Thermal Variations

N/A
N/A
Protected

Academic year: 2020

Share "Microstructure and Its Effect to Ultrasonic Velocity of Austenitic Stainless Steel in Thermal Variations"

Copied!
8
0
0

Loading.... (view fulltext now)

Full text

Loading

Figure

Fig.1. Microstructure of AISI 316 Austenitic stainless steel heat treated at 1000C for different holding time ; (S1)  as   received, (S2) 10 min , (S3) 20 min, (S4) 30 min, (S5) 40 min, (S6), 50 min
TABLE 3 ELASTIC CONSTANTS OF AISI 316 GRADE  AUSTENITIC STAINLESS STEEL  AT  DIFFERENT HEAT TREATMENT
Fig. 3. Correlation between Elastic constants and  ultrasonic velocity of AISI 316 Grade  Austenitic stainless steel

References

Related documents

Rusty Nuts is the Monthly Newsletter of the Automotive/Restoration Club of Sun City West, AZ LARC Breakfast Thursday, January 21 9:00 A.M.. Memo’s in the

Through this Handbook and the training sessions based on its successive chapters, the compliance officers of today and tomorrow will benefit from the hands-on expertise

7 See Wedel and Kamakura ( 2000 ) for more information on alternative matching coefficients... First, we could compute distinct distance matrices for each group of variables; that

In many SDN deploy- ments, the controllers run distributed protocols (e.g., dis- tributed consensus protocols such as Paxos [14]) to en- sure they have a consistent view of

• Kongsberg Maritime: Parts for Subsea wessel • Kongsberg Defence & Aerospace: Subsea parts • Reel Well: Advanced prototype drilling parts • Aarbakke: Subsea parts.. Supplier

2 I denote the relative price of bonds in terms of money in this market by q : On islands 1 and 2, the agents located on those islands trade money, liquid bonds, and goods in

Use a tag-based password authentication (tPAuth) protocol to perform secure authentication based on mutual knowledge of the shared password , and mutual agreement on a (possibly

ASI ASCOM driver will detect automatically which camera is connected and show it in the combo box.. Set parameters and