TCO Certified
Application form, version 4.2
Application for certification
A. New application
◻ TCO Certified
◻ Displays
◻ Notebooks
◻ Tablets
◻ Smartphones
◻ Desktops
◻ All-in-one PCs
◻ Projectors
◻ Headsets
◻ Servers
◻ Networking equipment
◻ Data storage
◻ TCO Certified Edge
◻ Minimum 85% recycled plastic content (displays)
◻ Halogen free (displays)
◻ Full function ergonomic display stand (displays)
◻ Minimum 50% recycled plastic content (all-in-one PCs)
◻ Outdoor readability (notebooks)
◻ Enhanced acoustic limiting (headsets)
◻ E-waste compensation (notebooks, smartphones, tablets)
B. Update of existing certificate
◻ New generation of TCO Certified ◻ Add critical component ◻ Add sales name(s) ◻ Other 1. COMPANY
(Responsible for the certificate and must have a signed license agreement with TCO Development.
Full name of company Reference or contact name
Address Telephone
Telefax E-mail
2. REPRESENTATIVE
(for the above company) Full name of representative Reference or contact name
Address Telephone
Telefax E-mail
Displays, all-in-one pcs, desktops, notebooks, tablets or smartphones
3. PRODUCT AND TECHNICAL DATA
4. DOCUMENTS ENCLOSED
Product category Size (inches):
Brand name Type /model name Sales name(s) LCD-panel type no.
The product has been certified earlier with the following brand name, type/model
name: Earlier certificate no.
Other information
Test laboratory Report number
◻ Audit report verification (social responsible manufacturing)
◻ Environmental verification report
◻ Emission test report and verification report
◻ Energy test report and verification report
◻ Separate power supply safety certificate IEC/EN 60950
◻ Certificate for product safety according to IEC/EN 60950
◻ Visual ergonomics test report and verification report
◻ Workload ergonomics verification report
◻ Acoustic test report and verification report
◻ TCO Certified Edge verification/test report
◻ Annual list of factories, each with a planned audit date for socially responsible manufacturing
◻ Four photos of the test product (front, rear, view of open panel and readable panel marking plate) For desktops: two photos (front and rear)
◻ Copy of the product marking label
◻ Copy of the external power supply marking plate
◻ “Declaration of identity” if compliance is based on a previous test report of an identical product
◻ Sales name(s) as defined in the General Terms
◻ Type designation key (for type/model names with undefined characters using an asterisk)
Note! Documents used as a basis for a certification must be in English and not be more than two years old.
For faster handling, send all documents listed above together in a single email to [email protected].
Please see the applicable application process document for advice on filling out this application form.
Projectors
3. PRODUCT AND TECHNICAL DATA
4. DOCUMENTS ENCLOSED
Product category (DMD/LCD/LCoS/LED) TCO Image Size office/video (inches):
Brand name Type/model name Sales name(s)
DMD chip no./ LCD-panel type no. Sound power level B(A)
The product has been certified earlier with the following brand name, type/model
name Earlier certificate number
Test laboratory Report number
◻ Acoustic test report and verification report
◻ Emission test report and verification report
◻ Energy test report and verification report
◻ Environmental approval and verification report
◻ Separate power supply safety certificate IEC/EN 60950
◻ Certificate for product safety according to IEC/EN 60950-1, UL 60950 or IEC/EN 60065
◻ Visual ergonomics test report and verification report
◻ TCO Certified Edge verification/test report
◻ Three photos of the certified product (front, rear and connections)
◻ Copy of the marking label
◻ “Declaration of identity” if compliance is based on a previous test report of an identical product
◻ Sales name(s) as defined in the General Terms
◻ Type designation key (in case of type/model name with undefined characters)
This is a document describing what the possible undefined characters mean. The provisions on how to use the type designation key is announced by TCO Development from time to time.
Note! Documents used as a basis for a certification must be in English and not be more than two years old.
For faster handling, send all documents listed above together in a single email to [email protected].
Please see the applicable application process document for advice in filling out this application form.
Headsets
3. PRODUCT AND TECHNICAL DATA
4. DOCUMENTS ENCLOSED
Product category Brand name
Type/model name Connection type (wired/wireless-bluetooth/dect)
Sales name(s)
Headphone type no. Microphone type no
The product has been certified earlier with the following brand name, type/model name:
Other information
Test laboratory Report number
◻ Acoustic test report and verification report
◻ Durability test report and verification report
◻ Environmental approval and verification report
◻ Charger emission test report and verification report
◻ Energy report/approval and verification report
◻ SAR report and verification report
◻ Certificate for product safety according to IEC/EN 60950-1, UL 60950 and/or EN/IEC 60065
◻ Workload ergonomics declaration or test report
◻ TCO Certified Edge verification/test report
◻ 4 photos of the certified product (mounted on the HATS from front, back and each side)
◻ Copy of the marking label (on charger)
◻ “Declaration of identity” if compliance is based on a previous test report of an identical product
◻ Sales name(s) as defined in the General Terms
◻ Type designation key (in case of type/model name with undefined characters)
This is a document describing what the possible undefined characters mean. The provisions on how to use the type designation key is announced by TCO Development from time to time.
Note! Documents used as a basis for a certification must be in English and not be more than two years old.
For faster handling, send all documents listed above together in a single email to [email protected].
Please see the applicable application process document for advice in filling out this application form.
Servers, Networking equipment, Data storage
3. PRODUCT AND TECHNICAL DATA
4. DOCUMENTS ENCLOSED
Product category Brand name Type /model name Sales name(s)
The product has been certified earlier with the following brand name, type/model
name: Earlier certificate no.
Other information
Test laboratory Report number
◻ Audit report verification (social responsible manufacturing)
◻ Environmental verification report
◻ Energy test report and verification report
◻ Separate power supply safety certificate IEC/EN 60950
◻ Certificate for product safety according to IEC/EN 60950
◻ TCO Certified Edge verification/test report
◻ Annual list of factories, each with a planned audit date for socially responsible manufacturing
◻ Copy of the product marking label
◻ Copy of the external power supply marking plate
◻ “Declaration of identity” if compliance is based on a previous test report of an identical product
◻ Sales name(s) as defined in the General Terms
◻ Type designation key (for type/model names with undefined characters using an asterisk)
Note! Documents used as a basis for a certification must be in English and not be more than two years old.
For faster handling, send all documents listed above together in a single email to [email protected].
Please see the applicable application process document for advice on filling out this application form.
5. CERTIFICATE INFORMATION
6. INVOICE INFORMATION
The following entity shall receive the certificate:
◻ The company
◻ The representative of the company, or ◻ The brand owner
If other please fill in below and submit authorisation letter from the company.
Full name of the receiver of the certificate Reference or contact name
Address Telephone
Telefax E-mail
The following entity shall receive the invoice:
◻ The company
◻ The representative of the company, or ◻ The brand owner
If other please fill in below and submit authorisation letter from company.
Full name of entity receiving the invoice
Reference or contact name .
Address Telephone
Telefax E-mail Invoice tag (Purchase order nr)
VAT information
7. AGREEMENT
8. SIGNATURE
The company has already signed an entry form and entered into the Agreement with
TCO Development. TCO Development notes
◻ Yes
No. The above named company wishes, on the basis of the information accompanying this application form, to enter into the agreement with TCO Development, in accordance with TCO Developments requirements.
Place and date Name of legal entity Signature
